From: Chen-Yu Tsai <wenst@chromium.org>
To: Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>
Cc: Chen-Yu Tsai <wenst@chromium.org>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, stable@vger.kernel.org
Subject: [PATCH] drm/bridge: it6505: Fix inverted reset polarity
Date: Tue, 29 Oct 2024 17:54:10 +0800 [thread overview]
Message-ID: <20241029095411.657616-1-wenst@chromium.org> (raw)
The IT6505 bridge chip has a active low reset line. Since it is a
"reset" and not an "enable" line, the GPIO should be asserted to
put it in reset and deasserted to bring it out of reset during
the power on sequence.
The polarity was inverted when the driver was first introduced, likely
because the device family that was targeted had an inverting level
shifter on the reset line.
The MT8186 Corsola devices already have the IT6505 in their device tree,
but the whole display pipeline is actually disabled and won't be enabled
until some remaining issues are sorted out. The other known user is
the MT8183 Kukui / Jacuzzi family; their device trees currently do not
have the IT6505 included.
Fix the polarity in the driver while there are no actual users.
Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
drivers/gpu/drm/bridge/ite-it6505.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 7502a5f81557..df7ecdf0f422 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -2618,9 +2618,9 @@ static int it6505_poweron(struct it6505 *it6505)
/* time interval between OVDD and SYSRSTN at least be 10ms */
if (pdata->gpiod_reset) {
usleep_range(10000, 20000);
- gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
- usleep_range(1000, 2000);
gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
+ usleep_range(1000, 2000);
+ gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
usleep_range(25000, 35000);
}
@@ -2651,7 +2651,7 @@ static int it6505_poweroff(struct it6505 *it6505)
disable_irq_nosync(it6505->irq);
if (pdata->gpiod_reset)
- gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
+ gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
if (pdata->pwr18) {
err = regulator_disable(pdata->pwr18);
@@ -3205,7 +3205,7 @@ static int it6505_init_pdata(struct it6505 *it6505)
return PTR_ERR(pdata->ovdd);
}
- pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(pdata->gpiod_reset)) {
dev_err(dev, "gpiod_reset gpio not found");
return PTR_ERR(pdata->gpiod_reset);
--
2.47.0.163.g1226f6d8fa-goog
next reply other threads:[~2024-10-29 9:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-29 9:54 Chen-Yu Tsai [this message]
2024-10-31 19:37 ` [PATCH] drm/bridge: it6505: Fix inverted reset polarity Dmitry Baryshkov
2024-11-04 8:34 ` Neil Armstrong
2024-11-04 12:55 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241029095411.657616-1-wenst@chromium.org \
--to=wenst@chromium.org \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=andrzej.hajda@intel.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=matthias.bgg@gmail.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rfoss@kernel.org \
--cc=stable@vger.kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox