[PATCH net-next v3 1/5] net: phy: mediatek: Re-organize MediaTek ethernet phy drivers

[Sky Huang <SkyLake.Huang@mediatek.com>]

From: "SkyLake.Huang" <skylake.huang@mediatek.com>

Re-organize MediaTek ethernet phy driver files and get ready to integrate
some common functions and add new 2.5G phy driver.
mtk-ge.c: MT7530 Gphy on MT7621 & MT7531 Gphy
mtk-ge-soc.c: Built-in Gphy on MT7981 & Built-in switch Gphy on MT7988
mtk-2p5ge.c: Planned for built-in 2.5G phy on MT7988

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
 MAINTAINERS                                   |  4 ++--
 drivers/net/phy/Kconfig                       | 17 +-------------
 drivers/net/phy/Makefile                      |  3 +--
 drivers/net/phy/mediatek/Kconfig              | 22 +++++++++++++++++++
 drivers/net/phy/mediatek/Makefile             |  3 +++
 .../mtk-ge-soc.c}                             |  0
 .../phy/{mediatek-ge.c => mediatek/mtk-ge.c}  |  0
 7 files changed, 29 insertions(+), 20 deletions(-)
 create mode 100644 drivers/net/phy/mediatek/Kconfig
 create mode 100644 drivers/net/phy/mediatek/Makefile
 rename drivers/net/phy/{mediatek-ge-soc.c => mediatek/mtk-ge-soc.c} (100%)
 rename drivers/net/phy/{mediatek-ge.c => mediatek/mtk-ge.c} (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index e291445..6deaf94 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13793,8 +13793,8 @@ M:	Qingfang Deng <dqfext@gmail.com>
 M:	SkyLake Huang <SkyLake.Huang@mediatek.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/phy/mediatek-ge-soc.c
-F:	drivers/net/phy/mediatek-ge.c
+F:	drivers/net/phy/mediatek/mtk-ge-soc.c
+F:	drivers/net/phy/mediatek/mtk-ge.c
 F:	drivers/phy/mediatek/phy-mtk-xfi-tphy.c
 
 MEDIATEK I2C CONTROLLER DRIVER
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 1df0595..e0e4b5e 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -251,22 +251,7 @@ config MAXLINEAR_GPHY
 	  Support for the Maxlinear GPY115, GPY211, GPY212, GPY215,
 	  GPY241, GPY245 PHYs.
 
-config MEDIATEK_GE_PHY
-	tristate "MediaTek Gigabit Ethernet PHYs"
-	help
-	  Supports the MediaTek Gigabit Ethernet PHYs.
-
-config MEDIATEK_GE_SOC_PHY
-	tristate "MediaTek SoC Ethernet PHYs"
-	depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
-	depends on NVMEM_MTK_EFUSE
-	help
-	  Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
-
-	  Include support for built-in Ethernet PHYs which are present in
-	  the MT7981 and MT7988 SoCs. These PHYs need calibration data
-	  present in the SoCs efuse and will dynamically calibrate VCM
-	  (common-mode voltage) during startup.
+source "drivers/net/phy/mediatek/Kconfig"
 
 config MICREL_PHY
 	tristate "Micrel PHYs"
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 197acfa..de38cbf 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -71,8 +71,7 @@ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
 obj-$(CONFIG_MARVELL_88Q2XXX_PHY)	+= marvell-88q2xxx.o
 obj-$(CONFIG_MARVELL_88X2222_PHY)	+= marvell-88x2222.o
 obj-$(CONFIG_MAXLINEAR_GPHY)	+= mxl-gpy.o
-obj-$(CONFIG_MEDIATEK_GE_PHY)	+= mediatek-ge.o
-obj-$(CONFIG_MEDIATEK_GE_SOC_PHY)	+= mediatek-ge-soc.o
+obj-y				+= mediatek/
 obj-$(CONFIG_MESON_GXL_PHY)	+= meson-gxl.o
 obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
 obj-$(CONFIG_MICREL_PHY)	+= micrel.o
diff --git a/drivers/net/phy/mediatek/Kconfig b/drivers/net/phy/mediatek/Kconfig
new file mode 100644
index 0000000..112d9c0
--- /dev/null
+++ b/drivers/net/phy/mediatek/Kconfig
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MEDIATEK_GE_PHY
+	tristate "MediaTek Gigabit Ethernet PHYs"
+	help
+	  Supports the MediaTek non-built-in Gigabit Ethernet PHYs.
+
+	  Non-built-in Gigabit Ethernet PHYs include mt7530/mt7531.
+	  You may find mt7530 inside mt7621. This driver shares some
+	  common operations with MediaTek SoC built-in Gigabit
+	  Ethernet PHYs.
+
+config MEDIATEK_GE_SOC_PHY
+	tristate "MediaTek SoC Ethernet PHYs"
+	depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
+	depends on NVMEM_MTK_EFUSE
+	help
+	  Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
+
+	  Include support for built-in Ethernet PHYs which are present in
+	  the MT7981 and MT7988 SoCs. These PHYs need calibration data
+	  present in the SoCs efuse and will dynamically calibrate VCM
+	  (common-mode voltage) during startup.
diff --git a/drivers/net/phy/mediatek/Makefile b/drivers/net/phy/mediatek/Makefile
new file mode 100644
index 0000000..005bde2
--- /dev/null
+++ b/drivers/net/phy/mediatek/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_MEDIATEK_GE_PHY)		+= mtk-ge.o
+obj-$(CONFIG_MEDIATEK_GE_SOC_PHY)	+= mtk-ge-soc.o
diff --git a/drivers/net/phy/mediatek-ge-soc.c b/drivers/net/phy/mediatek/mtk-ge-soc.c
similarity index 100%
rename from drivers/net/phy/mediatek-ge-soc.c
rename to drivers/net/phy/mediatek/mtk-ge-soc.c
diff --git a/drivers/net/phy/mediatek-ge.c b/drivers/net/phy/mediatek/mtk-ge.c
similarity index 100%
rename from drivers/net/phy/mediatek-ge.c
rename to drivers/net/phy/mediatek/mtk-ge.c
-- 
2.45.2