[PATCH v5 6/7] mips: dts: Add EcoNet DTS with EN751221 and SmartFiber XP8421-B board

[Caleb James DeLisle <cjd@cjdns.fr>]

Add DTS files in support of EcoNet platform, including SmartFiber XP8421-B,
a low cost commercially available board based on EN751221.

Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
---
 arch/mips/boot/dts/Makefile                   |  1 +
 arch/mips/boot/dts/econet/Makefile            |  2 +
 arch/mips/boot/dts/econet/en751221.dtsi       | 67 +++++++++++++++++++
 .../econet/en751221_smartfiber_xp8421-b.dts   | 19 ++++++
 arch/mips/econet/Kconfig                      | 11 +++
 5 files changed, 100 insertions(+)
 create mode 100644 arch/mips/boot/dts/econet/Makefile
 create mode 100644 arch/mips/boot/dts/econet/en751221.dtsi
 create mode 100644 arch/mips/boot/dts/econet/en751221_smartfiber_xp8421-b.dts

diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index ff468439a8c4..7375c6ced82b 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 subdir-$(CONFIG_BMIPS_GENERIC)		+= brcm
 subdir-$(CONFIG_CAVIUM_OCTEON_SOC)	+= cavium-octeon
+subdir-$(CONFIG_ECONET)			+= econet
 subdir-$(CONFIG_EYEQ)			+= mobileye
 subdir-$(CONFIG_FIT_IMAGE_FDT_MARDUK)   += img
 subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= img
diff --git a/arch/mips/boot/dts/econet/Makefile b/arch/mips/boot/dts/econet/Makefile
new file mode 100644
index 000000000000..b467d5624e39
--- /dev/null
+++ b/arch/mips/boot/dts/econet/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DTB_ECONET_SMARTFIBER_XP8421_B)	+= en751221_smartfiber_xp8421-b.dtb
diff --git a/arch/mips/boot/dts/econet/en751221.dtsi b/arch/mips/boot/dts/econet/en751221.dtsi
new file mode 100644
index 000000000000..66197e73d4f0
--- /dev/null
+++ b/arch/mips/boot/dts/econet/en751221.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/ {
+	compatible = "econet,en751221";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	hpt_clock: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;  /* 200 MHz */
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips24KEc";
+			reg = <0>;
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+		interrupt-controller;
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+	};
+
+	intc: interrupt-controller@1fb40000 {
+		compatible = "econet,en751221-intc";
+		reg = <0x1fb40000 0x100>;
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		econet,shadow-interrupts = <7 2>, <8 3>, <13 12>, <30 29>;
+	};
+
+	uart: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupt-parent = <&intc>;
+		interrupts = <0>;
+		/*
+		 * Conversion of baud rate to clock frequency requires a
+		 * computation that is not in the ns16550 driver, so this
+		 * uart is fixed at 115200 baud.
+		 */
+		clock-frequency = <1843200>;
+	};
+
+	timer_hpt: timer@1fbf0400 {
+		compatible = "econet,en751221-timer";
+		reg = <0x1fbf0400 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <30>;
+		clocks = <&hpt_clock>;
+	};
+};
diff --git a/arch/mips/boot/dts/econet/en751221_smartfiber_xp8421-b.dts b/arch/mips/boot/dts/econet/en751221_smartfiber_xp8421-b.dts
new file mode 100644
index 000000000000..8223c5bce67f
--- /dev/null
+++ b/arch/mips/boot/dts/econet/en751221_smartfiber_xp8421-b.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+#include "en751221.dtsi"
+
+/ {
+	model = "SmartFiber XP8421-B";
+	compatible = "smartfiber,xp8421-b", "econet,en751221";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x1c000000>;
+	};
+
+	chosen {
+		stdout-path = "/serial@1fbf0000:115200";
+		linux,usable-memory-range = <0x00020000 0x1bfe0000>;
+	};
+};
diff --git a/arch/mips/econet/Kconfig b/arch/mips/econet/Kconfig
index d03f90f3daa4..fd69884cc9a8 100644
--- a/arch/mips/econet/Kconfig
+++ b/arch/mips/econet/Kconfig
@@ -32,6 +32,17 @@ choice
 
 	config DTB_ECONET_NONE
 		bool "None"
+
+	config DTB_ECONET_SMARTFIBER_XP8421_B
+		bool "EN751221 SmartFiber XP8421-B"
+		depends on SOC_ECONET_EN751221
+		select BUILTIN_DTB
+		help
+		  The SmartFiber XP8421-B is a device based on the EN751221 SoC.
+		  It has 512MB of memory and 256MB of NAND flash. This kernel
+		  needs only an appended initramfs to boot. It can be loaded
+		  through XMODEM and booted from memory in the bootloader, or
+		  it can be packed in tclinux.trx format and written to flash.
 endchoice
 
 endif
-- 
2.39.5