From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 4D904CCD18A for ; Sun, 12 Oct 2025 20:59:16 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:To:From:Reply-To: Cc:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=hYSFvNXJ1OxOrTIGf+Idmx9ir1vilL2ggeDDXDhQi4w=; b=gAAicu+R131agN47WxP9boiPcK YhBD1u9UVYJ6/Ir3c+wm3PjA/VAwpCPSCU27C/lQ2B9Gsilbv4fZStlcCekUlA7cYzTWeAI+P9USZ CeH1hQkQUA5pd0r/BpSyFJd9QEu53uibhxHkhl8iw5y9CA+iiI7cJR3aO1F3hxmiBqraWdWCB/9BR 2fNPzsXo+xZ/FjyVLKTKLQ13gS7Ut19Ao7YccfZ+FY05PDmLBZvmXi2OEH+cBAMRmf/8BhQGUsmx3 5QKj8+Al2puMxB+5MPZgBJCcaCWiqX7XotVbNJsN9Bvnnp7Yzi5ccW2xv1brpArI08ENUSMUIOjMy T168HsMA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98.2 #2 (Red Hat Linux)) id 1v839v-0000000BlUp-1i6e; Sun, 12 Oct 2025 20:59:15 +0000 Received: from mail-wm1-x333.google.com ([2a00:1450:4864:20::333]) by bombadil.infradead.org with esmtps (Exim 4.98.2 #2 (Red Hat Linux)) id 1v839s-0000000BlRP-2NWb for linux-mediatek@lists.infradead.org; Sun, 12 Oct 2025 20:59:14 +0000 Received: by mail-wm1-x333.google.com with SMTP id 5b1f17b1804b1-46e37d10ed2so32167875e9.2 for ; Sun, 12 Oct 2025 13:59:12 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1760302751; x=1760907551; darn=lists.infradead.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:from:to:cc:subject:date:message-id :reply-to; bh=hYSFvNXJ1OxOrTIGf+Idmx9ir1vilL2ggeDDXDhQi4w=; b=AwdJcV2Yi0AojBdY7bXxsfwVkohtlVvctSCOljfT0+trUCJdZqHe12miCvM6Vngsip H5aBqIjNEZxaqbICBcnnUBsvvq/kObTDibpWSIlAUazkAInpB1SiB/e7P+qUBvDKzGNg 3l7ITahrFAegKMO7pmodjKmnKLMWKobSg4LNyqszuvJh+QJpYY+QaOdqyQIWp5j1N8Y/ DLMeLtujuU1UZPPCegkaMMB5PfyT2CQnH4/yishSZdjuTG1ToEQv6+/c9hlBChJaKGq+ lZgte9r5dN4t60+2+N5eEIkqUGzIfe38zXZw89TNGROApx6T+16utehixRg/Gj98aV9K RAbQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1760302751; x=1760907551; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=hYSFvNXJ1OxOrTIGf+Idmx9ir1vilL2ggeDDXDhQi4w=; b=VnD+kLt3WMqBLYttdejs96zs4MPErl1WQ0QuwaMz88aOojfxaSWwKgQ/is2owDSSn5 HuqWDcZ+yPrvJ5lJAW9+Cq4fIW55VI0jP6nR7SRrEPtrxQ0jRHzuiEvhAJHxQ/uHUWXb 9t8Z3MRyFFpogWEahtNP+WN7aaxeln/lcan/eWA10QkTXj5qpVEJgCC5+gILB5LtHy3F 5UwaI7qvZNc7lcYeLwEpuLfy3FDBwuRtLE2KMlL+SxRq6hh7zsuw60NloZM3F3QObn8+ TGDVW6iN1qxwOc7ADHLNDQMCm9vxT3B3vr4fpobZMTxo+jp2qji0l3tXXXaeDoKpGy9k HBkQ== X-Forwarded-Encrypted: i=1; AJvYcCVev6ZB7FnYmo0Zxa3lTVJYUt0qSnhnB+JzFMAaOwYKk5kHrNmeXTU1NkzgjFGBkKObPm5WcbKGPjjpUxu1/g==@lists.infradead.org X-Gm-Message-State: AOJu0Ywc6j/1xMf95fboXjBUHrB/bWL/6azo1RZIChxkh8zdY6yv1Sbk cELnDd9Dvi91a7s5Ct3zFLGHF9pCuKCSoeuQf0odZRQfShrPJ2SpdyTj X-Gm-Gg: ASbGncvs7YpjAvvuuuUEI7b/anGKAsnCCn4sFM/KmdpO1cDFplNvw1MdOoclHHH9l/r aKEBPEQMZIJSbd79ixrYAYMNICvve8TvdI+BmkJvc47PRHMR+gB7loBEQ/OsoI5R+PbMFxvqSXz f36ZeVV96cZi4GNTRftdOgRt5zpPMG21JVIEOHgz771sidXoPIPqeuFj0EWXNOKXwe7JT+9tmGg r73CSlxfz8U1MjuBhtP4vN4jNlk2ZybRk2Tbs5kkdGnjnDEwryQXmyHRj1xJcmHLRJTtGq/AJt3 YyHgruUu6FbpwZ+MfWNNtvSVUZkY/A6ycksRSl5V5IEK/nlzO7Y19UHuia1SYyMI4GM9VSQc5yX M5ZX62SkRD6CzFef5MxV7sQQQaCeV4SYVfpvNBi7dXhJXMqNu2Utxysz4Y7eIqQCPlWWm1DRXXQ == X-Google-Smtp-Source: AGHT+IE/qZWuIeVOHVAdAPSs/X8s3cxy5ODj4035FEzP+gG24WTSi9JYBid4P2voLoXMQ7ZLoZm0MA== X-Received: by 2002:a05:600c:1990:b0:46e:1b89:77f1 with SMTP id 5b1f17b1804b1-46fa9aa1c74mr120521345e9.9.1760302750399; Sun, 12 Oct 2025 13:59:10 -0700 (PDT) Received: from Ansuel-XPS24 (93-34-92-177.ip49.fastwebnet.it. [93.34.92.177]) by smtp.googlemail.com with ESMTPSA id 5b1f17b1804b1-46fb489197dsm156506505e9.10.2025.10.12.13.59.09 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 12 Oct 2025 13:59:10 -0700 (PDT) From: Christian Marangi To: Ryder Lee , Jianjun Wang , Bjorn Helgaas , Lorenzo Pieralisi , =?UTF-8?q?Krzysztof=20Wilczy=C5=84ski?= , Manivannan Sadhasivam , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Matthias Brugger , AngeloGioacchino Del Regno , Christian Marangi , linux-pci@vger.kernel.org, linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, upstream@airoha.com Subject: [PATCH v5 2/5] dt-bindings: PCI: mediatek: Convert to YAML schema Date: Sun, 12 Oct 2025 22:56:56 +0200 Message-ID: <20251012205900.5948-3-ansuelsmth@gmail.com> X-Mailer: git-send-email 2.51.0 In-Reply-To: <20251012205900.5948-1-ansuelsmth@gmail.com> References: <20251012205900.5948-1-ansuelsmth@gmail.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20251012_135912_858003_24AE2FD9 X-CRM114-Status: GOOD ( 22.02 ) X-BeenThere: linux-mediatek@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-mediatek" Errors-To: linux-mediatek-bounces+linux-mediatek=archiver.kernel.org@lists.infradead.org Convert the PCI mediatek Documentation to YAML schema to enable validation of the supported GEN1/2 Mediatek PCIe controller. While converting, lots of cleanup were done from the .txt with better specifying what is supported by the various PCIe controller variant and drop of redundant info that are part of the standard PCIe Host Bridge schema. To reduce schema complexity the .txt is split in 2 YAML, one for mt7623/mt2701 and the other for every other compatible. Signed-off-by: Christian Marangi --- .../bindings/pci/mediatek-pcie-mt7623.yaml | 164 +++++++++ .../devicetree/bindings/pci/mediatek-pcie.txt | 289 ---------------- .../bindings/pci/mediatek-pcie.yaml | 318 ++++++++++++++++++ 3 files changed, 482 insertions(+), 289 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml delete mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie.yaml diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml new file mode 100644 index 000000000000..e33bcc216e30 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-mt7623.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PCIe controller on MediaTek SoCs + +maintainers: + - Christian Marangi + +properties: + compatible: + enum: + - mediatek,mt2701-pcie + - mediatek,mt7623-pcie + + reg: + minItems: 4 + maxItems: 4 + + reg-names: + items: + - const: subsys + - const: port0 + - const: port1 + - const: port2 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: free_ck + - const: sys_ck0 + - const: sys_ck1 + - const: sys_ck2 + + resets: + minItems: 3 + maxItems: 3 + + reset-names: + items: + - const: pcie-rst0 + - const: pcie-rst1 + - const: pcie-rst2 + + phys: + minItems: 3 + maxItems: 3 + + phy-names: + items: + - const: pcie-phy0 + - const: pcie-phy1 + - const: pcie-phy2 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - '#interrupt-cells' + - resets + - reset-names + - phys + - phy-names + - power-domains + - pcie@0,0 + - pcie@1,0 + - pcie@2,0 + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +unevaluatedProperties: false + +examples: + # MT7623 + - | + #include + #include + #include + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1a140000 { + compatible = "mediatek,mt7623-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ + <0 0x1a142000 0 0x1000>, /* Port0 registers */ + <0 0x1a143000 0 0x1000>, /* Port1 registers */ + <0 0x1a144000 0 0x1000>; /* Port2 registers */ + reg-names = "subsys", "port0", "port1", "port2"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, + <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, + <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <&hifsys CLK_HIFSYS_PCIE0>, + <&hifsys CLK_HIFSYS_PCIE1>, + <&hifsys CLK_HIFSYS_PCIE2>; + clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; + resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, + <&hifsys MT2701_HIFSYS_PCIE1_RST>, + <&hifsys MT2701_HIFSYS_PCIE2_RST>; + reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>, + <&pcie2_phy PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000>, /* I/O space */ + <0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ + + pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; + ranges; + }; + + pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + ranges; + }; + + pcie@2,0 { + device_type = "pci"; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + ranges; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt deleted file mode 100644 index 684227522267..000000000000 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt +++ /dev/null @@ -1,289 +0,0 @@ -MediaTek Gen2 PCIe controller - -Required properties: -- compatible: Should contain one of the following strings: - "mediatek,mt2701-pcie" - "mediatek,mt2712-pcie" - "mediatek,mt7622-pcie" - "mediatek,mt7623-pcie" - "mediatek,mt7629-pcie" - "airoha,en7523-pcie" -- device_type: Must be "pci" -- reg: Base addresses and lengths of the root ports. -- reg-names: Names of the above areas to use during resource lookup. -- #address-cells: Address representation for root ports (must be 3) -- #size-cells: Size representation for root ports (must be 2) -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: - Mandatory entries: - - sys_ckN :transaction layer and data link layer clock - Required entries for MT2701/MT7623: - - free_ck :for reference clock of PCIe subsys - Required entries for MT2712/MT7622: - - ahb_ckN :AHB slave interface operating clock for CSR access and RC - initiated MMIO access - Required entries for MT7622: - - axi_ckN :application layer MMIO channel operating clock - - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when - pcie_mac_ck/pcie_pipe_ck is turned off - - obff_ckN :OBFF functional block operating clock - - pipe_ckN :LTSSM and PHY/MAC layer operating clock - where N starting from 0 to one less than the number of root ports. -- phys: List of PHY specifiers (used by generic PHY framework). -- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the - number of PHYs as specified in *phys* property. -- power-domains: A phandle and power domain specifier pair to the power domain - which is responsible for collapsing and restoring power to the peripheral. -- bus-range: Range of bus numbers associated with this controller. -- ranges: Ranges for the PCI memory and I/O regions. - -Required properties for MT7623/MT2701: -- #interrupt-cells: Size representation for interrupts (must be 1) -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the - number of root ports. - -Required properties for MT2712/MT7622/MT7629: --interrupts: A list of interrupt outputs of the controller, must have one - entry for each PCIe port -- interrupt-names: Must include the following entries: - - "pcie_irq": The interrupt that is asserted when an MSI/INTX is received -- linux,pci-domain: PCI domain ID. Should be unique for each host controller - -In addition, the device tree node must have sub-nodes describing each -PCIe port interface, having the following mandatory properties: - -Required properties: -- device_type: Must be "pci" -- reg: Only the first four bytes are used to refer to the correct bus number - and device number. -- #address-cells: Must be 3 -- #size-cells: Must be 2 -- #interrupt-cells: Must be 1 -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. -- ranges: Sub-ranges distributed from the PCIe controller node. An empty - property is sufficient. - -Examples for MT7623: - - hifsys: syscon@1a000000 { - compatible = "mediatek,mt7623-hifsys", - "mediatek,mt2701-hifsys", - "syscon"; - reg = <0 0x1a000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - pcie: pcie@1a140000 { - compatible = "mediatek,mt7623-pcie"; - device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ - <0 0x1a142000 0 0x1000>, /* Port0 registers */ - <0 0x1a143000 0 0x1000>, /* Port1 registers */ - <0 0x1a144000 0 0x1000>; /* Port2 registers */ - reg-names = "subsys", "port0", "port1", "port2"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 0>; - interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, - <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, - <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <&hifsys CLK_HIFSYS_PCIE0>, - <&hifsys CLK_HIFSYS_PCIE1>, - <&hifsys CLK_HIFSYS_PCIE2>; - clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; - resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, - <&hifsys MT2701_HIFSYS_PCIE1_RST>, - <&hifsys MT2701_HIFSYS_PCIE2_RST>; - reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>, - <&pcie2_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; - bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */ - 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ - - pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; - ranges; - }; - - pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; - ranges; - }; - - pcie@2,0 { - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; - ranges; - }; - }; - -Examples for MT2712: - - pcie1: pcie@112ff000 { - compatible = "mediatek,mt2712-pcie"; - device_type = "pci"; - reg = <0 0x112ff000 0 0x1000>; - reg-names = "port1"; - linux,pci-domain = <1>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = ; - interrupt-names = "pcie_irq"; - clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE1>; - clock-names = "sys_ck1", "ahb_ck1"; - phys = <&u3port1 PHY_TYPE_PCIE>; - phy-names = "pcie-phy1"; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; - status = "disabled"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - - pcie0: pcie@11700000 { - compatible = "mediatek,mt2712-pcie"; - device_type = "pci"; - reg = <0 0x11700000 0 0x1000>; - reg-names = "port0"; - linux,pci-domain = <0>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = ; - interrupt-names = "pcie_irq"; - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, - <&pericfg CLK_PERI_PCIE0>; - clock-names = "sys_ck0", "ahb_ck0"; - phys = <&u3port0 PHY_TYPE_PCIE>; - phy-names = "pcie-phy0"; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; - status = "disabled"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - -Examples for MT7622: - - pcie0: pcie@1a143000 { - compatible = "mediatek,mt7622-pcie"; - device_type = "pci"; - reg = <0 0x1a143000 0 0x1000>; - reg-names = "port0"; - linux,pci-domain = <0>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = ; - interrupt-names = "pcie_irq"; - clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, - <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P0_AUX_EN>, - <&pciesys CLK_PCIE_P0_AXI_EN>, - <&pciesys CLK_PCIE_P0_OBFF_EN>, - <&pciesys CLK_PCIE_P0_PIPE_EN>; - clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", - "axi_ck0", "obff_ck0", "pipe_ck0"; - - power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; - status = "disabled"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - - pcie1: pcie@1a145000 { - compatible = "mediatek,mt7622-pcie"; - device_type = "pci"; - reg = <0 0x1a145000 0 0x1000>; - reg-names = "port1"; - linux,pci-domain = <1>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = ; - interrupt-names = "pcie_irq"; - clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, - /* designer has connect RC1 with p0_ahb clock */ - <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P1_AUX_EN>, - <&pciesys CLK_PCIE_P1_AXI_EN>, - <&pciesys CLK_PCIE_P1_OBFF_EN>, - <&pciesys CLK_PCIE_P1_PIPE_EN>; - clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", - "axi_ck1", "obff_ck1", "pipe_ck1"; - - power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; - status = "disabled"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml new file mode 100644 index 000000000000..fca6cb20d18b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml @@ -0,0 +1,318 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PCIe controller on MediaTek SoCs + +maintainers: + - Christian Marangi + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2712-pcie + - mediatek,mt7622-pcie + - mediatek,mt7629-pcie + - items: + - const: airoha,en7523-pcie + - const: mediatek,mt7622-pcie + + reg: + maxItems: 1 + + reg-names: + enum: [ port0, port1 ] + + clocks: + minItems: 1 + maxItems: 6 + + clock-names: + minItems: 1 + items: + - enum: [ sys_ck0, sys_ck1 ] + - enum: [ ahb_ck0, ahb_ck1 ] + - enum: [ aux_ck0, aux_ck1 ] + - enum: [ axi_ck0, axi_ck1 ] + - enum: [ obff_ck0, obff_ck1 ] + - enum: [ pipe_ck0, pipe_ck1 ] + + interrupts: + maxItems: 1 + + interrupt-names: + const: pcie_irq + + phys: + maxItems: 1 + + phy-names: + enum: [ pcie-phy0, pcie-phy1 ] + + power-domains: + maxItems: 1 + + '#interrupt-cells': + const: 1 + + interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + properties: + '#address-cells': + const: 0 + '#interrupt-cells': + const: 1 + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - '#interrupt-cells' + - interrupts + - interrupt-names + - interrupt-controller + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + + - if: + properties: + compatible: + const: mediatek,mt2712-pcie + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + minItems: 2 + maxItems: 2 + + power-domains: false + + required: + - phys + - phy-names + + - if: + properties: + compatible: + const: mediatek,mt7622-pcie + then: + properties: + clocks: + minItems: 6 + + phys: false + + phy-names: false + + required: + - power-domains + + - if: + properties: + compatible: + const: mediatek,mt7629-pcie + then: + properties: + clocks: + minItems: 6 + + required: + - power-domains + + - if: + properties: + compatible: + contains: + const: airoha,en7523-pcie + then: + properties: + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + phys: false + + phy-names: false + + power-domain: false + +unevaluatedProperties: false + +examples: + # MT2712 + - | + #include + #include + #include + + soc_1 { + #address-cells = <2>; + #size-cells = <2>; + + pcie@112ff000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x112ff000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen>, /* CLK_TOP_PE2_MAC_P1_SEL */ + <&pericfg>; /* CLK_PERI_PCIE1 */ + clock-names = "sys_ck1", "ahb_ck1"; + phys = <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen>, /* CLK_TOP_PE2_MAC_P0_SEL */ + <&pericfg>; /* CLK_PERI_PCIE0 */ + clock-names = "sys_ck0", "ahb_ck0"; + phys = <&u3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + + # MT7622 + - | + #include + #include + #include + + soc_2 { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1a143000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a143000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&pciesys>, /* CLK_PCIE_P0_MAC_EN */ + <&pciesys>, /* CLK_PCIE_P0_AHB_EN */ + <&pciesys>, /* CLK_PCIE_P0_AUX_EN */ + <&pciesys>, /* CLK_PCIE_P0_AXI_EN */ + <&pciesys>, /* CLK_PCIE_P0_OBFF_EN */ + <&pciesys>; /* CLK_PCIE_P0_PIPE_EN */ + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", + "axi_ck0", "obff_ck0", "pipe_ck0"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0_1 0>, + <0 0 0 2 &pcie_intc0_1 1>, + <0 0 0 3 &pcie_intc0_1 2>, + <0 0 0 4 &pcie_intc0_1 3>; + pcie_intc0_1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie@1a145000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a145000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&pciesys>, /* CLK_PCIE_P1_MAC_EN */ + /* designer has connect RC1 with p0_ahb clock */ + <&pciesys>, /* CLK_PCIE_P0_AHB_EN */ + <&pciesys>, /* CLK_PCIE_P1_AUX_EN */ + <&pciesys>, /* CLK_PCIE_P1_AXI_EN */ + <&pciesys>, /* CLK_PCIE_P1_OBFF_EN */ + <&pciesys>; /* CLK_PCIE_P1_PIPE_EN */ + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", + "axi_ck1", "obff_ck1", "pipe_ck1"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1_1 0>, + <0 0 0 2 &pcie_intc1_1 1>, + <0 0 0 3 &pcie_intc1_1 2>, + <0 0 0 4 &pcie_intc1_1 3>; + pcie_intc1_1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; -- 2.51.0