[PATCH v2 1/8] mmc: sdio: add MediaTek MT7902 SDIO device ID

[PATCH v2 1/8] mmc: sdio: add MediaTek MT7902 SDIO device ID

[Sean Wang]

From: Sean Wang <sean.wang@mediatek.com>

Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
v2:
1. Sort the MT7902 SDIO ID definitions.
2. Add Acked-by from Ulf. Ulf mentioned this should go along with the other
patches, so Ulf not picking this via the mmc tree.
---
 include/linux/mmc/sdio_ids.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 673cbdf43453..dce89c110691 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -111,6 +111,7 @@
 #define SDIO_VENDOR_ID_MEDIATEK			0x037a
 #define SDIO_DEVICE_ID_MEDIATEK_MT7663		0x7663
 #define SDIO_DEVICE_ID_MEDIATEK_MT7668		0x7668
+#define SDIO_DEVICE_ID_MEDIATEK_MT7902		0x790a
 #define SDIO_DEVICE_ID_MEDIATEK_MT7961		0x7961
 
 #define SDIO_VENDOR_ID_MICROCHIP_WILC		0x0296
-- 
2.43.0

[PATCH v2 2/8] Bluetooth: btmtk: add MT7902 MCU support

[Sean Wang]

From: Sean Wang <sean.wang@mediatek.com>

Add MT7902 device ID and firmware filename to enable MCU firmware
loading.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
v2: no changes
---
 drivers/bluetooth/btmtk.c | 1 +
 drivers/bluetooth/btmtk.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index 14e2f4100806..2507d587f28a 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -1338,6 +1338,7 @@ int btmtk_usb_setup(struct hci_dev *hdev)
 	case 0x7922:
 	case 0x7925:
 	case 0x7961:
+	case 0x7902:
 		btmtk_fw_get_filename(fw_bin_name, sizeof(fw_bin_name), dev_id,
 				      fw_version, fw_flavor);
 
diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
index b9df2b8f0627..adaf385626ee 100644
--- a/drivers/bluetooth/btmtk.h
+++ b/drivers/bluetooth/btmtk.h
@@ -5,6 +5,7 @@
 #define FIRMWARE_MT7663		"mediatek/mt7663pr2h.bin"
 #define FIRMWARE_MT7668		"mediatek/mt7668pr2h.bin"
 #define FIRMWARE_MT7922		"mediatek/BT_RAM_CODE_MT7922_1_1_hdr.bin"
+#define FIRMWARE_MT7902		"mediatek/BT_RAM_CODE_MT7902_1_1_hdr.bin"
 #define FIRMWARE_MT7961		"mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin"
 #define FIRMWARE_MT7925		"mediatek/mt7925/BT_RAM_CODE_MT7925_1_1_hdr.bin"
 
-- 
2.43.0

[PATCH v2 3/8] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902

[Sean Wang]

From: Sean Wang <sean.wang@mediatek.com>

Add VID 13d3 & PID 3579 for MediaTek MT7902 USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#=  7 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3579 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
v2:
1. Update the commit message with the correct VID/PID.
2. Add clear comments specifying which device the VID/PID corresponds to.
---
 drivers/bluetooth/btusb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d58e7e4557b9..94554097191d 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -671,7 +671,9 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3606), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
-
+	/* MediaTek MT7902 Bluetooth devices */
+	{ USB_DEVICE(0x13d3, 0x3579), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	/* MediaTek MT7922 Bluetooth devices */
 	{ USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
-- 
2.43.0

[PATCH v2 4/8] Bluetooth: btusb: Add new VID/PID 13d3/3580 for MT7902

[Sean Wang]

From: Sean Wang <sean.wang@mediatek.com>

Add VID 13d3 & PID 3580 for MediaTek MT7902 USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3580 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Co-developed-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com>
Signed-off-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
v2: newly added
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 94554097191d..3a45b16c6b08 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -674,6 +674,8 @@ static const struct usb_device_id quirks_table[] = {
 	/* MediaTek MT7902 Bluetooth devices */
 	{ USB_DEVICE(0x13d3, 0x3579), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3580), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	/* MediaTek MT7922 Bluetooth devices */
 	{ USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
-- 
2.43.0

[PATCH v2 5/8] Bluetooth: btusb: Add new VID/PID 13d3/3594 for MT7902

[Sean Wang]

From: Sean Wang <sean.wang@mediatek.com>

Add VID 13d3 & PID 3594 for MediaTek MT7902 USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3594 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Co-developed-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com>
Signed-off-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>

---
v2: newly added
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 3a45b16c6b08..0f1bd9b5d296 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -676,6 +676,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3580), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3594), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	/* MediaTek MT7922 Bluetooth devices */
 	{ USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
-- 
2.43.0

[PATCH v2 6/8] Bluetooth: btusb: Add new VID/PID 13d3/3596 for MT7902

[Sean Wang]

From: Sean Wang <sean.wang@mediatek.com>

Add VID 13d3 & PID 3596 for MediaTek MT7902 USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3596 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Co-developed-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com>
Signed-off-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
v2: newly added
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 0f1bd9b5d296..4e8bf032d35e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -678,6 +678,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3594), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3596), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	/* MediaTek MT7922 Bluetooth devices */
 	{ USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
-- 
2.43.0

[PATCH v2 7/8] Bluetooth: btusb: Add new VID/PID 0e8d/1ede for MT7902

[Sean Wang]

From: Sean Wang <sean.wang@mediatek.com>

Add VID 0e8d & PID 1ede for MediaTek MT7902 USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0e8d ProdID=1ede Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Co-developed-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
v2: newly added
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 4e8bf032d35e..a5e44887a5b5 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -672,6 +672,8 @@ static const struct usb_device_id quirks_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3606), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	/* MediaTek MT7902 Bluetooth devices */
+	{ USB_DEVICE(0x0e8d, 0x1ede), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3579), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3580), .driver_info = BTUSB_MEDIATEK |
-- 
2.43.0

[PATCH v2 8/8] Bluetooth: btmtk: add MT7902 SDIO support

[Sean Wang]

From: Sean Wang <sean.wang@mediatek.com>

Add MT7902 Bluetooth SDIO support by introducing chip data and
registering the device ID.

Runtime PM is not yet supported by the driver, but normal operation
is unaffected.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
v2: no changes
---
 drivers/bluetooth/btmtksdio.c | 42 ++++++++++++++++++++++++-----------
 1 file changed, 29 insertions(+), 13 deletions(-)

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index e986e5af51ae..042064464d34 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -42,24 +42,35 @@ struct btmtksdio_data {
 	const char *fwname;
 	u16 chipid;
 	bool lp_mbox_supported;
+	bool pm_runtime_supported;
 };
 
 static const struct btmtksdio_data mt7663_data = {
 	.fwname = FIRMWARE_MT7663,
 	.chipid = 0x7663,
 	.lp_mbox_supported = false,
+	.pm_runtime_supported = true,
 };
 
 static const struct btmtksdio_data mt7668_data = {
 	.fwname = FIRMWARE_MT7668,
 	.chipid = 0x7668,
 	.lp_mbox_supported = false,
+	.pm_runtime_supported = true,
 };
 
 static const struct btmtksdio_data mt7921_data = {
 	.fwname = FIRMWARE_MT7961,
 	.chipid = 0x7921,
 	.lp_mbox_supported = true,
+	.pm_runtime_supported = true,
+};
+
+static const struct btmtksdio_data mt7902_data = {
+	.fwname = FIRMWARE_MT7902,
+	.chipid = 0x7902,
+	.lp_mbox_supported = false,
+	.pm_runtime_supported = false,
 };
 
 static const struct sdio_device_id btmtksdio_table[] = {
@@ -69,6 +80,8 @@ static const struct sdio_device_id btmtksdio_table[] = {
 	 .driver_data = (kernel_ulong_t)&mt7668_data },
 	{SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7961),
 	 .driver_data = (kernel_ulong_t)&mt7921_data },
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7902),
+	.driver_data = (kernel_ulong_t)&mt7902_data },
 	{ }	/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(sdio, btmtksdio_table);
@@ -1090,6 +1103,7 @@ static int btmtksdio_setup(struct hci_dev *hdev)
 	set_bit(BTMTKSDIO_HW_TX_READY, &bdev->tx_state);
 
 	switch (bdev->data->chipid) {
+	case 0x7902:
 	case 0x7921:
 		if (test_bit(BTMTKSDIO_HW_RESET_ACTIVE, &bdev->tx_state)) {
 			err = btmtksdio_mtk_reg_read(hdev, MT7921_DLSTATUS,
@@ -1167,22 +1181,24 @@ static int btmtksdio_setup(struct hci_dev *hdev)
 	delta = ktime_sub(rettime, calltime);
 	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
 
-	pm_runtime_set_autosuspend_delay(bdev->dev,
-					 MTKBTSDIO_AUTOSUSPEND_DELAY);
-	pm_runtime_use_autosuspend(bdev->dev);
+	if (bdev->data->pm_runtime_supported) {
+		pm_runtime_set_autosuspend_delay(bdev->dev,
+						 MTKBTSDIO_AUTOSUSPEND_DELAY);
+		pm_runtime_use_autosuspend(bdev->dev);
 
-	err = pm_runtime_set_active(bdev->dev);
-	if (err < 0)
-		return err;
+		err = pm_runtime_set_active(bdev->dev);
+		if (err < 0)
+			return err;
 
-	/* Default forbid runtime auto suspend, that can be allowed by
-	 * enable_autosuspend flag or the PM runtime entry under sysfs.
-	 */
-	pm_runtime_forbid(bdev->dev);
-	pm_runtime_enable(bdev->dev);
+		/* Default forbid runtime auto suspend, that can be allowed by
+		 * enable_autosuspend flag or the PM runtime entry under sysfs.
+		 */
+		pm_runtime_forbid(bdev->dev);
+		pm_runtime_enable(bdev->dev);
 
-	if (enable_autosuspend)
-		pm_runtime_allow(bdev->dev);
+		if (enable_autosuspend)
+			pm_runtime_allow(bdev->dev);
+	}
 
 	bt_dev_info(hdev, "Device setup in %llu usecs", duration);
 
-- 
2.43.0

Re: [PATCH v2 1/8] mmc: sdio: add MediaTek MT7902 SDIO device ID

[patchwork-bot+bluetooth]

Hello:

This series was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:

On Tue, 24 Feb 2026 00:13:18 -0600 you wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
> 
> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> 
> [...]

Here is the summary with links:
  - [v2,1/8] mmc: sdio: add MediaTek MT7902 SDIO device ID
    https://git.kernel.org/bluetooth/bluetooth-next/c/30c211ed0440
  - [v2,2/8] Bluetooth: btmtk: add MT7902 MCU support
    https://git.kernel.org/bluetooth/bluetooth-next/c/ad7c85c44e42
  - [v2,3/8] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902
    https://git.kernel.org/bluetooth/bluetooth-next/c/39b32232e047
  - [v2,4/8] Bluetooth: btusb: Add new VID/PID 13d3/3580 for MT7902
    https://git.kernel.org/bluetooth/bluetooth-next/c/cde58a6f8d84
  - [v2,5/8] Bluetooth: btusb: Add new VID/PID 13d3/3594 for MT7902
    https://git.kernel.org/bluetooth/bluetooth-next/c/71fa9af03199
  - [v2,6/8] Bluetooth: btusb: Add new VID/PID 13d3/3596 for MT7902
    https://git.kernel.org/bluetooth/bluetooth-next/c/2dbd6783e368
  - [v2,7/8] Bluetooth: btusb: Add new VID/PID 0e8d/1ede for MT7902
    https://git.kernel.org/bluetooth/bluetooth-next/c/df6be153d1bb
  - [v2,8/8] Bluetooth: btmtk: add MT7902 SDIO support
    https://git.kernel.org/bluetooth/bluetooth-next/c/287f90321f25

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html