From: Chen-Yu Tsai <wenst@chromium.org>
To: "Matthias Brugger" <matthias.bgg@gmail.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
"Ryder Lee" <ryder.lee@mediatek.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>,
Bartosz Golaszewski <brgl@bgdev.pl>,
linux-pci@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-kernel@vger.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Subject: [PATCH v6 7/7] PCI: mediatek-gen3: Integrate new pwrctrl API
Date: Tue, 24 Mar 2026 13:19:59 +0800 [thread overview]
Message-ID: <20260324052002.4072430-8-wenst@chromium.org> (raw)
In-Reply-To: <20260324052002.4072430-1-wenst@chromium.org>
With the new PCI pwrctrl API and PCI slot binding and power drivers, we
now have a way to describe and power up WiFi/BT adapters connected
through a PCIe or M.2 slot, or populated onto the mainboard itself.
The latter case has the adapter layout or design copied verbatim,
replacing the slot with direct connections.
Integrate the PCI pwrctrl API into the PCIe driver, so that power is
properly enabled before PCIe link training is done, allowing the
card to successfully be detected.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v5:
- Adapt to PCI_PWRCTRL_SLOT -> PCI_PWRCTRL_GENERIC Kconfig symbol namechange
---
drivers/pci/controller/Kconfig | 1 +
drivers/pci/controller/pcie-mediatek-gen3.c | 38 ++++++++++++++++-----
2 files changed, 31 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 5aaed8ac6e44..686349e09cd3 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -222,6 +222,7 @@ config PCIE_MEDIATEK_GEN3
depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST
depends on PCI_MSI
select IRQ_MSI_LIB
+ select PCI_PWRCTRL_GENERIC
help
Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.
This PCIe controller is compatible with Gen3, Gen2 and Gen1 speed,
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 208866d33c77..a94fdbaf47fe 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -22,6 +22,7 @@
#include <linux/of_device.h>
#include <linux/of_pci.h>
#include <linux/pci.h>
+#include <linux/pci-pwrctrl.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
@@ -421,15 +422,23 @@ static int mtk_pcie_devices_power_up(struct mtk_gen3_pcie *pcie)
val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB |
PCIE_PE_RSTB;
writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
+ }
+
+ err = pci_pwrctrl_power_on_devices(pcie->dev);
+ if (err) {
+ dev_err(pcie->dev, "Failed to power on devices: %pe\n", ERR_PTR(err));
+ return err;
+ }
- /*
- * Described in PCIe CEM specification revision 6.0.
- *
- * The deassertion of PERST# should be delayed 100ms (TPVPERL)
- * for the power and clock to become stable.
- */
- msleep(PCIE_T_PVPERL_MS);
+ /*
+ * Described in PCIe CEM specification revision 6.0.
+ *
+ * The deassertion of PERST# should be delayed 100ms (TPVPERL)
+ * for the power and clock to become stable.
+ */
+ msleep(PCIE_T_PVPERL_MS);
+ if (!(pcie->soc->flags & SKIP_PCIE_RSTB)) {
/* De-assert reset signals */
val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB |
PCIE_PE_RSTB);
@@ -449,6 +458,8 @@ static void mtk_pcie_devices_power_down(struct mtk_gen3_pcie *pcie)
val |= PCIE_PE_RSTB;
writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
}
+
+ pci_pwrctrl_power_off_devices(pcie->dev);
}
static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie)
@@ -1209,9 +1220,15 @@ static int mtk_pcie_probe(struct platform_device *pdev)
if (err)
return dev_err_probe(dev, err, "Failed to setup IRQ domains\n");
+ err = pci_pwrctrl_create_devices(pcie->dev);
+ if (err) {
+ goto err_tear_down_irq;
+ dev_err_probe(dev, err, "failed to create pwrctrl devices\n");
+ }
+
err = mtk_pcie_setup(pcie);
if (err)
- goto err_tear_down_irq;
+ goto err_destroy_pwrctrl;
host->ops = &mtk_pcie_ops;
host->sysdata = pcie;
@@ -1225,6 +1242,9 @@ static int mtk_pcie_probe(struct platform_device *pdev)
err_power_down_pcie:
mtk_pcie_devices_power_down(pcie);
mtk_pcie_power_down(pcie);
+err_destroy_pwrctrl:
+ if (err != -EPROBE_DEFER)
+ pci_pwrctrl_destroy_devices(pcie->dev);
err_tear_down_irq:
mtk_pcie_irq_teardown(pcie);
return err;
@@ -1240,7 +1260,9 @@ static void mtk_pcie_remove(struct platform_device *pdev)
pci_remove_root_bus(host->bus);
pci_unlock_rescan_remove();
+ pci_pwrctrl_power_off_devices(pcie->dev);
mtk_pcie_power_down(pcie);
+ pci_pwrctrl_destroy_devices(pcie->dev);
mtk_pcie_irq_teardown(pcie);
}
--
2.53.0.983.g0bb29b3bc5-goog
next prev parent reply other threads:[~2026-03-24 5:20 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-24 5:19 [PATCH v6 0/7] PCI: mediatek-gen3: add power control support Chen-Yu Tsai
2026-03-24 5:19 ` [PATCH v6 1/7] PCI: mediatek-gen3: Clean up mtk_pcie_parse_port() with dev_err_probe() Chen-Yu Tsai
2026-03-24 5:19 ` [PATCH v6 2/7] PCI: mediatek-gen3: Move mtk_pcie_setup_irq() out of mtk_pcie_setup() Chen-Yu Tsai
2026-03-24 5:19 ` [PATCH v6 3/7] PCI: mediatek-gen3: Move controller setup steps before PERST# control Chen-Yu Tsai
2026-03-24 5:19 ` [PATCH v6 4/7] PCI: mediatek-gen3: Add error path for resume driver callbacks Chen-Yu Tsai
2026-03-24 5:19 ` [PATCH v6 5/7] PCI: mediatek-gen3: Split out device power helpers Chen-Yu Tsai
2026-03-24 8:55 ` Chen-Yu Tsai
2026-03-24 10:55 ` Manivannan Sadhasivam
2026-03-24 5:19 ` [PATCH v6 6/7] PCI: mediatek-gen3: Disable device if further setup fails Chen-Yu Tsai
2026-03-24 5:19 ` Chen-Yu Tsai [this message]
2026-03-24 7:44 ` [PATCH v6 0/7] PCI: mediatek-gen3: add power control support Manivannan Sadhasivam
2026-03-24 7:52 ` Chen-Yu Tsai
2026-03-24 8:01 ` Manivannan Sadhasivam
2026-03-24 8:26 ` Chen-Yu Tsai
2026-03-24 11:22 ` Manivannan Sadhasivam
2026-03-24 7:49 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260324052002.4072430-8-wenst@chromium.org \
--to=wenst@chromium.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bartosz.golaszewski@oss.qualcomm.com \
--cc=bhelgaas@google.com \
--cc=brgl@bgdev.pl \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
--cc=ryder.lee@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox