From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, netdev@vger.kernel.org,
Lorenzo Bianconi <lorenzo@kernel.org>
Subject: [PATCH net] net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
Date: Sun, 12 Apr 2026 10:43:26 +0200 [thread overview]
Message-ID: <20260412-airoha_ppe_hw_init-missing-bits-v1-1-06ac670819e3@kernel.org> (raw)
Add the following PPE configuration in airoha_ppe_hw_init routine:
- 6RD hw offloading is currently not supported by Netfilter flowtable.
Disable explicitly PPE 6RD offloading in order to prevent PPE to learn
6RD flows and eventually interrupt the traffic.
- Add missing PPE bind rate configuration for L3 and L2 traffic.
PPE bind rate configuration specifies the pps threshold to move a PPE
entry state from UNBIND to BIND. Without this configuration this value
is random.
- Set ageing thresholds to the values used in the vendor SDK in order to
improve connection stability under load and avoid packet loss caused by
fast aging.
Fixes: 00a7678310fe3 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/net/ethernet/airoha/airoha_ppe.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/airoha/airoha_ppe.c b/drivers/net/ethernet/airoha/airoha_ppe.c
index c2c32b6833df..62cfffb4f0e5 100644
--- a/drivers/net/ethernet/airoha/airoha_ppe.c
+++ b/drivers/net/ethernet/airoha/airoha_ppe.c
@@ -111,13 +111,13 @@ static void airoha_ppe_hw_init(struct airoha_ppe *ppe)
airoha_fe_rmw(eth, REG_PPE_BND_AGE0(i),
PPE_BIND_AGE0_DELTA_NON_L4 |
PPE_BIND_AGE0_DELTA_UDP,
- FIELD_PREP(PPE_BIND_AGE0_DELTA_NON_L4, 1) |
- FIELD_PREP(PPE_BIND_AGE0_DELTA_UDP, 12));
+ FIELD_PREP(PPE_BIND_AGE0_DELTA_NON_L4, 60) |
+ FIELD_PREP(PPE_BIND_AGE0_DELTA_UDP, 60));
airoha_fe_rmw(eth, REG_PPE_BND_AGE1(i),
PPE_BIND_AGE1_DELTA_TCP_FIN |
PPE_BIND_AGE1_DELTA_TCP,
FIELD_PREP(PPE_BIND_AGE1_DELTA_TCP_FIN, 1) |
- FIELD_PREP(PPE_BIND_AGE1_DELTA_TCP, 7));
+ FIELD_PREP(PPE_BIND_AGE1_DELTA_TCP, 60));
airoha_fe_rmw(eth, REG_PPE_TB_HASH_CFG(i),
PPE_SRAM_TABLE_EN_MASK |
@@ -145,7 +145,15 @@ static void airoha_ppe_hw_init(struct airoha_ppe *ppe)
FIELD_PREP(PPE_DRAM_TB_NUM_ENTRY_MASK,
dram_num_entries));
+ airoha_fe_rmw(eth, REG_PPE_BIND_RATE(i),
+ PPE_BIND_RATE_L2B_BIND_MASK |
+ PPE_BIND_RATE_BIND_MASK,
+ FIELD_PREP(PPE_BIND_RATE_L2B_BIND_MASK, 0x1e) |
+ FIELD_PREP(PPE_BIND_RATE_BIND_MASK, 0x1e));
+
airoha_fe_wr(eth, REG_PPE_HASH_SEED(i), PPE_HASH_SEED);
+ airoha_fe_clear(eth, REG_PPE_PPE_FLOW_CFG(i),
+ PPE_FLOW_CFG_IP6_6RD_MASK);
for (p = 0; p < ARRAY_SIZE(eth->ports); p++)
airoha_fe_rmw(eth, REG_PPE_MTU(i, p),
---
base-commit: 02f72964395911e7a09bb2ea2fe6f79eda4ea2c2
change-id: 20260412-airoha_ppe_hw_init-missing-bits-3d00a229adc1
Best regards,
--
Lorenzo Bianconi <lorenzo@kernel.org>
reply other threads:[~2026-04-12 8:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260412-airoha_ppe_hw_init-missing-bits-v1-1-06ac670819e3@kernel.org \
--to=lorenzo@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox