From: Michael Bommarito <michael.bommarito@gmail.com>
To: Hans Verkuil <hverkuil@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Nicolas Dufresne <nicolas.dufresne@collabora.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Benjamin Gaignard <benjamin.gaignard@collabora.com>,
Detlev Casanova <detlev.casanova@collabora.com>,
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
Yunfei Dong <yunfei.dong@mediatek.com>,
Jonas Karlman <jonas@kwiboo.se>, Heiko Stuebner <heiko@sntech.de>,
Kees Cook <kees@kernel.org>,
linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/6] media: rkvdec: bound HEVC tile loops and PPS id to the array capacity
Date: Sun, 14 Jun 2026 11:56:04 -0400 [thread overview]
Message-ID: <20260614155609.3107600-3-michael.bommarito@gmail.com> (raw)
In-Reply-To: <20260614155609.3107600-1-michael.bommarito@gmail.com>
compute_tiles_uniform() / compute_tiles_non_uniform() and assemble_hw_pps()
loop over num_tile_columns_minus1 / num_tile_rows_minus1 to write the
per-tile column_width[] / row_height[] arrays, sized to the PPS uAPI arrays
column_width_minus1[20] / row_height_minus1[22]; bound the loops to that
capacity. assemble_hw_pps() also indexes the fixed param_set[] table by
pic_parameter_set_id, a driver-interpreted index the core does not reject;
bound it to the table size before the access.
Fixes: 3595375c2301 ("media: rkvdec: Add HEVC backend")
Fixes: c9a59dc2acc7 ("media: rkvdec: Add HEVC support for the VDPU381 variant")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-8
---
.../rockchip/rkvdec/rkvdec-hevc-common.c | 22 +++++++++++++++----
.../platform/rockchip/rkvdec/rkvdec-hevc.c | 8 +++++--
.../rockchip/rkvdec/rkvdec-vdpu381-hevc.c | 2 ++
3 files changed, 26 insertions(+), 6 deletions(-)
diff --git a/drivers/media/platform/rockchip/rkvdec/rkvdec-hevc-common.c b/drivers/media/platform/rockchip/rkvdec/rkvdec-hevc-common.c
index 3119f3bc9f98b..d0f26f736a763 100644
--- a/drivers/media/platform/rockchip/rkvdec/rkvdec-hevc-common.c
+++ b/drivers/media/platform/rockchip/rkvdec/rkvdec-hevc-common.c
@@ -37,15 +37,22 @@ void compute_tiles_uniform(struct rkvdec_hevc_run *run, u16 log2_min_cb_size,
s32 pic_in_cts_height, u16 *column_width, u16 *row_height)
{
const struct v4l2_ctrl_hevc_pps *pps = run->pps;
+ unsigned int num_cols, num_rows;
int i;
- for (i = 0; i < pps->num_tile_columns_minus1 + 1; i++)
+ /* Bound the loops to the column_width[]/row_height[] capacity. */
+ num_cols = min_t(unsigned int, pps->num_tile_columns_minus1 + 1,
+ ARRAY_SIZE(pps->column_width_minus1));
+ num_rows = min_t(unsigned int, pps->num_tile_rows_minus1 + 1,
+ ARRAY_SIZE(pps->row_height_minus1));
+
+ for (i = 0; i < num_cols; i++)
column_width[i] = ((i + 1) * pic_in_cts_width) /
(pps->num_tile_columns_minus1 + 1) -
(i * pic_in_cts_width) /
(pps->num_tile_columns_minus1 + 1);
- for (i = 0; i < pps->num_tile_rows_minus1 + 1; i++)
+ for (i = 0; i < num_rows; i++)
row_height[i] = ((i + 1) * pic_in_cts_height) /
(pps->num_tile_rows_minus1 + 1) -
(i * pic_in_cts_height) /
@@ -57,17 +64,24 @@ void compute_tiles_non_uniform(struct rkvdec_hevc_run *run, u16 log2_min_cb_size
s32 pic_in_cts_height, u16 *column_width, u16 *row_height)
{
const struct v4l2_ctrl_hevc_pps *pps = run->pps;
+ unsigned int num_cols, num_rows;
s32 sum = 0;
int i;
- for (i = 0; i < pps->num_tile_columns_minus1; i++) {
+ /* Leave one slot for the trailing last-tile entry written below. */
+ num_cols = min_t(unsigned int, pps->num_tile_columns_minus1,
+ ARRAY_SIZE(pps->column_width_minus1) - 1);
+ num_rows = min_t(unsigned int, pps->num_tile_rows_minus1,
+ ARRAY_SIZE(pps->row_height_minus1) - 1);
+
+ for (i = 0; i < num_cols; i++) {
column_width[i] = pps->column_width_minus1[i] + 1;
sum += column_width[i];
}
column_width[i] = pic_in_cts_width - sum;
sum = 0;
- for (i = 0; i < pps->num_tile_rows_minus1; i++) {
+ for (i = 0; i < num_rows; i++) {
row_height[i] = pps->row_height_minus1[i] + 1;
sum += row_height[i];
}
diff --git a/drivers/media/platform/rockchip/rkvdec/rkvdec-hevc.c b/drivers/media/platform/rockchip/rkvdec/rkvdec-hevc.c
index ac8b825d080a2..29b5adb509727 100644
--- a/drivers/media/platform/rockchip/rkvdec/rkvdec-hevc.c
+++ b/drivers/media/platform/rockchip/rkvdec/rkvdec-hevc.c
@@ -156,6 +156,8 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
* packet unit). so the driver copy SPS/PPS information to the exact PPS
* packet unit for HW accessing.
*/
+ if (pps->pic_parameter_set_id >= ARRAY_SIZE(priv_tbl->param_set))
+ return;
hw_ps = &priv_tbl->param_set[pps->pic_parameter_set_id];
memset(hw_ps, 0, sizeof(*hw_ps));
@@ -274,9 +276,11 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
if (pps->flags & V4L2_HEVC_PPS_FLAG_TILES_ENABLED) {
/* Userspace also provide column width and row height for uniform spacing */
- for (i = 0; i <= pps->num_tile_columns_minus1; i++)
+ for (i = 0; i <= pps->num_tile_columns_minus1 &&
+ i < ARRAY_SIZE(pps->column_width_minus1); i++)
WRITE_PPS(pps->column_width_minus1[i], COLUMN_WIDTH(i));
- for (i = 0; i <= pps->num_tile_rows_minus1; i++)
+ for (i = 0; i <= pps->num_tile_rows_minus1 &&
+ i < ARRAY_SIZE(pps->row_height_minus1); i++)
WRITE_PPS(pps->row_height_minus1[i], ROW_HEIGHT(i));
} else {
WRITE_PPS(((sps->pic_width_in_luma_samples + ctb_size_y - 1) / ctb_size_y) - 1,
diff --git a/drivers/media/platform/rockchip/rkvdec/rkvdec-vdpu381-hevc.c b/drivers/media/platform/rockchip/rkvdec/rkvdec-vdpu381-hevc.c
index fe6414a175510..6dafa1dd28507 100644
--- a/drivers/media/platform/rockchip/rkvdec/rkvdec-vdpu381-hevc.c
+++ b/drivers/media/platform/rockchip/rkvdec/rkvdec-vdpu381-hevc.c
@@ -145,6 +145,8 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
* packet unit). so the driver copy SPS/PPS information to the exact PPS
* packet unit for HW accessing.
*/
+ if (pps->pic_parameter_set_id >= ARRAY_SIZE(priv_tbl->param_set))
+ return;
hw_ps = &priv_tbl->param_set[pps->pic_parameter_set_id];
memset(hw_ps, 0, sizeof(*hw_ps));
--
2.53.0
next prev parent reply other threads:[~2026-06-14 15:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-14 15:56 [PATCH v2 0/6] media: v4l2-ctrls: bound stateless HEVC/AV1 tile counts Michael Bommarito
2026-06-14 15:56 ` [PATCH v2 1/6] media: v4l2-ctrls: validate HEVC and AV1 " Michael Bommarito
2026-06-14 15:56 ` Michael Bommarito [this message]
2026-06-14 15:56 ` [PATCH v2 3/6] media: verisilicon: hantro: bound G2 HEVC tile loop to the buffer capacity Michael Bommarito
2026-06-14 15:56 ` [PATCH v2 4/6] media: verisilicon: rockchip: bound VPU981 AV1 tile loop and guard divisor Michael Bommarito
2026-06-14 15:56 ` [PATCH v2 5/6] media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity Michael Bommarito
2026-06-14 15:56 ` [PATCH v2 6/6] media: v4l2-ctrls: add KUnit tests for compound control tile validation Michael Bommarito
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260614155609.3107600-3-michael.bommarito@gmail.com \
--to=michael.bommarito@gmail.com \
--cc=benjamin.gaignard@collabora.com \
--cc=detlev.casanova@collabora.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=heiko@sntech.de \
--cc=hverkuil@kernel.org \
--cc=jonas@kwiboo.se \
--cc=kees@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=nicolas.dufresne@collabora.com \
--cc=sakari.ailus@linux.intel.com \
--cc=yunfei.dong@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox