From: Myeonghun Pak <mhun512@gmail.com>
To: Sean Wang <sean.wang@mediatek.com>, Vinod Koul <vkoul@kernel.org>,
Frank Li <Frank.Li@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
Myeonghun Pak <mhun512@gmail.com>, Ijae Kim <ae878000@gmail.com>
Subject: [PATCH] dmaengine: mediatek: hsdma: fix runtime PM leak on init failure
Date: Wed, 24 Jun 2026 17:16:38 +0900 [thread overview]
Message-ID: <20260624081701.19358-1-mhun512@gmail.com> (raw)
mtk_hsdma_hw_init() enables runtime PM and gets a runtime PM reference
before enabling the HSDMA clock. It currently ignores failures from
pm_runtime_get_sync(); if runtime resume fails, the usage count remains
held. If clk_prepare_enable() then fails, runtime PM is left enabled with
the usage count held.
Use pm_runtime_resume_and_get() so resume failures do not leak the usage
count, and unwind runtime PM when clk_prepare_enable() fails.
The probe path also ignores the return value from mtk_hsdma_hw_init(), so a
failed hardware init can continue as a successful probe. Propagate
mtk_hsdma_hw_init() failures from probe, while keeping a separate unwind
label so mtk_hsdma_hw_deinit() is only called after hardware init succeeds.
Fixes: 548c4597e984 ("dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and MT7623 SoC")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
---
drivers/dma/mediatek/mtk-hsdma.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
index a43412ff5e..987e5274fc 100644
--- a/drivers/dma/mediatek/mtk-hsdma.c
+++ b/drivers/dma/mediatek/mtk-hsdma.c
@@ -849,16 +849,25 @@ static int mtk_hsdma_hw_init(struct mtk_hsdma_device *hsdma)
int err;
pm_runtime_enable(hsdma2dev(hsdma));
- pm_runtime_get_sync(hsdma2dev(hsdma));
+ err = pm_runtime_resume_and_get(hsdma2dev(hsdma));
+ if (err < 0)
+ goto err_disable_pm;
err = clk_prepare_enable(hsdma->clk);
if (err)
- return err;
+ goto err_put_pm;
mtk_dma_write(hsdma, MTK_HSDMA_INT_ENABLE, 0);
mtk_dma_write(hsdma, MTK_HSDMA_GLO, MTK_HSDMA_GLO_DEFAULT);
return 0;
+
+err_put_pm:
+ pm_runtime_put_sync(hsdma2dev(hsdma));
+err_disable_pm:
+ pm_runtime_disable(hsdma2dev(hsdma));
+
+ return err;
}
static int mtk_hsdma_hw_deinit(struct mtk_hsdma_device *hsdma)
@@ -983,7 +992,9 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
goto err_unregister;
}
- mtk_hsdma_hw_init(hsdma);
+ err = mtk_hsdma_hw_init(hsdma);
+ if (err)
+ goto err_free;
err = devm_request_irq(&pdev->dev, hsdma->irq,
mtk_hsdma_irq, 0,
@@ -991,7 +1002,7 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
if (err) {
dev_err(&pdev->dev,
"request_irq failed with err %d\n", err);
- goto err_free;
+ goto err_deinit;
}
platform_set_drvdata(pdev, hsdma);
@@ -1000,8 +1011,9 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
return 0;
-err_free:
+err_deinit:
mtk_hsdma_hw_deinit(hsdma);
+err_free:
of_dma_controller_free(pdev->dev.of_node);
err_unregister:
dma_async_device_unregister(dd);
--
2.47.1
reply other threads:[~2026-06-24 8:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260624081701.19358-1-mhun512@gmail.com \
--to=mhun512@gmail.com \
--cc=Frank.Li@kernel.org \
--cc=ae878000@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=sean.wang@mediatek.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox