Linux-mediatek Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Wang <sean.wang@kernel.org>
To: Felix Fietkau <nbd@nbd.name>, Lorenzo Bianconi <lorenzo@kernel.org>
Cc: chengwei.yu@mediatek.com, yu-ching.liu@mediatek.com,
	jenhao.yang@mediatek.com, posh.sun@mediatek.com,
	linux-wireless@vger.kernel.org,
	linux-mediatek@lists.infradead.org,
	Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v2 9/9] wifi: mt76: mt792x: advertise NAN data support
Date: Wed, 24 Jun 2026 19:18:34 -0500	[thread overview]
Message-ID: <20260625001834.475094-10-sean.wang@kernel.org> (raw)
In-Reply-To: <20260625001834.475094-1-sean.wang@kernel.org>

From: Sean Wang <sean.wang@mediatek.com>

Advertise NAN and NAN data support when firmware exposes NAN
capability.

Add NAN interface combinations on top of the dynamic combination
framework, advertise 2.4 GHz and 5 GHz NAN bands, and enable secure
NAN.

Keep the base interface combinations unchanged when NAN is unavailable
so existing STA/AP/P2P modes keep the same limits.

Co-developed-by: Stella Liu <yu-ching.liu@mediatek.com>
Signed-off-by: Stella Liu <yu-ching.liu@mediatek.com>
Co-developed-by: Jeremy Yu <chengwei.yu@mediatek.com>
Signed-off-by: Jeremy Yu <chengwei.yu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 .../net/wireless/mediatek/mt76/mt792x_core.c  | 96 ++++++++++++++++++-
 1 file changed, 92 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_core.c b/drivers/net/wireless/mediatek/mt76/mt792x_core.c
index ffe0bcdf1df6..411c04640add 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_core.c
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_core.c
@@ -3,6 +3,7 @@
 
 #include <linux/module.h>
 #include <linux/firmware.h>
+#include <linux/slab.h>
 
 #include "mt792x.h"
 #include "dma.h"
@@ -60,6 +61,40 @@ static const struct ieee80211_iface_limit if_limits_chanctx_scc[] = {
 	}
 };
 
+static const struct ieee80211_iface_limit if_limits_nan_mcc[] = {
+	{
+		.max = 2,
+		.types = BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_NAN),
+	},
+	{
+		.max = 2,
+		.types = BIT(NL80211_IFTYPE_NAN_DATA),
+	},
+};
+
+static const struct ieee80211_iface_limit if_limits_nan_scc[] = {
+	{
+		.max = 2,
+		.types = BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_NAN),
+	},
+	{
+		.max = 2,
+		.types = BIT(NL80211_IFTYPE_NAN_DATA),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_AP),
+	},
+};
+
 static const struct ieee80211_iface_combination if_comb_chanctx_base[] = {
 	{
 		.limits = if_limits_chanctx_mcc,
@@ -77,9 +112,31 @@ static const struct ieee80211_iface_combination if_comb_chanctx_base[] = {
 	}
 };
 
-static int mt792x_setup_iface_combinations(struct mt792x_dev *dev)
+static const struct ieee80211_iface_combination if_comb_chanctx_nan[] = {
+	{
+		.limits = if_limits_nan_mcc,
+		.n_limits = ARRAY_SIZE(if_limits_nan_mcc),
+		.max_interfaces = MT792x_MAX_INTERFACES,
+		.num_different_channels = 2,
+		.beacon_int_infra_match = false,
+	},
+	{
+		.limits = if_limits_nan_scc,
+		.n_limits = ARRAY_SIZE(if_limits_nan_scc),
+		.max_interfaces = MT792x_MAX_INTERFACES,
+		.num_different_channels = 1,
+		.beacon_int_infra_match = false,
+	},
+};
+
+static int mt792x_setup_iface_combinations(struct mt792x_dev *dev,
+					   struct wiphy *wiphy)
 {
 	const bool cnm = !!(dev->fw_features & MT792x_FW_CAP_CNM);
+	const bool nan = !!(dev->fw_features & MT792x_FW_CAP_NAN);
+	const int n_base = ARRAY_SIZE(if_comb_chanctx_base);
+	const int n_nan = ARRAY_SIZE(if_comb_chanctx_nan);
+	struct ieee80211_iface_combination *comb;
 
 	if (!cnm) {
 		dev->iface_combinations = if_comb;
@@ -87,8 +144,24 @@ static int mt792x_setup_iface_combinations(struct mt792x_dev *dev)
 		return 0;
 	}
 
-	dev->iface_combinations = if_comb_chanctx_base;
-	dev->n_iface_combinations = ARRAY_SIZE(if_comb_chanctx_base);
+	/* CNM enabled, NAN optional */
+	if (!nan) {
+		dev->iface_combinations = if_comb_chanctx_base;
+		dev->n_iface_combinations = ARRAY_SIZE(if_comb_chanctx_base);
+		return 0;
+	}
+
+	/* CNM + NAN: dynamically build base + nan list */
+	comb = devm_kcalloc(&wiphy->dev, n_base + n_nan, sizeof(*comb),
+			    GFP_KERNEL);
+	if (!comb)
+		return -ENOMEM;
+
+	memcpy(comb, if_comb_chanctx_base, sizeof(if_comb_chanctx_base));
+	memcpy(comb + n_base, if_comb_chanctx_nan, sizeof(if_comb_chanctx_nan));
+
+	dev->iface_combinations = comb;
+	dev->n_iface_combinations = n_base + n_nan;
 
 	return 0;
 }
@@ -705,7 +778,7 @@ int mt792x_init_wiphy(struct ieee80211_hw *hw)
 	else
 		wiphy->flags &= ~WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
 
-	err = mt792x_setup_iface_combinations(dev);
+	err = mt792x_setup_iface_combinations(dev, wiphy);
 	if (err)
 		return err;
 
@@ -719,6 +792,21 @@ int mt792x_init_wiphy(struct ieee80211_hw *hw)
 				 BIT(NL80211_IFTYPE_P2P_GO) |
 				 BIT(NL80211_IFTYPE_P2P_DEVICE);
 
+	if ((dev->fw_features & MT792x_FW_CAP_CNM) &&
+	    (dev->fw_features & MT792x_FW_CAP_NAN)) {
+		wiphy->interface_modes |= BIT(NL80211_IFTYPE_NAN) |
+					  BIT(NL80211_IFTYPE_NAN_DATA);
+		wiphy->nan_supported_bands = BIT(NL80211_BAND_2GHZ) |
+					      BIT(NL80211_BAND_5GHZ);
+		wiphy->nan_capa.flags = WIPHY_NAN_FLAGS_CONFIGURABLE_SYNC |
+					WIPHY_NAN_FLAGS_USERSPACE_DE;
+		wiphy->nan_capa.op_mode = NAN_OP_MODE_PHY_MODE_MASK;
+		wiphy->nan_capa.n_antennas = 0x22;
+		wiphy->nan_capa.max_channel_switch_time = 12;
+		wiphy->nan_capa.dev_capabilities = NAN_DEV_CAPA_EXT_KEY_ID_SUPPORTED;
+		wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_SECURE_NAN);
+	}
+
 	wiphy->max_scan_ie_len = MT76_CONNAC_SCAN_IE_LEN;
 	wiphy->max_scan_ssids = 4;
 	wiphy->max_sched_scan_plan_interval =
-- 
2.43.0



      parent reply	other threads:[~2026-06-25  0:20 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-25  0:18 [PATCH v2 0/9] wifi: mt76: add mt7925 NAN support Sean Wang
2026-06-25  0:18 ` [PATCH v2 1/9] wifi: mt76: mt792x: advertise mgmt frame registration Sean Wang
2026-06-25  0:18 ` [PATCH v2 2/9] wifi: mt76: mt7925: guard BSS capability lookups Sean Wang
2026-06-25  0:18 ` [PATCH v2 3/9] wifi: mt76: connac: add NAN connection type Sean Wang
2026-06-25  0:18 ` [PATCH v2 4/9] wifi: mt76: mt7925: add NAN MCU helpers Sean Wang
2026-06-25  0:18 ` [PATCH v2 5/9] wifi: mt76: mt7925: add NAN MCU handling Sean Wang
2026-06-25  0:18 ` [PATCH v2 6/9] wifi: mt76: add init_wiphy callback Sean Wang
2026-06-25  0:18 ` [PATCH v2 7/9] wifi: mt76: mt7925: wire up NAN operations Sean Wang
2026-06-25  0:18 ` [PATCH v2 8/9] wifi: mt76: mt792x: build iface combinations dynamically Sean Wang
2026-06-25  0:18 ` Sean Wang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260625001834.475094-10-sean.wang@kernel.org \
    --to=sean.wang@kernel.org \
    --cc=chengwei.yu@mediatek.com \
    --cc=jenhao.yang@mediatek.com \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=lorenzo@kernel.org \
    --cc=nbd@nbd.name \
    --cc=posh.sun@mediatek.com \
    --cc=sean.wang@mediatek.com \
    --cc=yu-ching.liu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox