From: Praveen Talari <praveen.talari@oss.qualcomm.com>
To: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Matthias Brugger" <matthias.bgg@gmail.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
"Richard Genoud" <richard.genoud@bootlin.com>,
"Nicolas Ferre" <nicolas.ferre@microchip.com>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Claudiu Beznea" <claudiu.beznea@tuxon.dev>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Peter Griffin" <peter.griffin@linaro.org>,
"Alim Akhtar" <alim.akhtar@samsung.com>,
"Orson Zhai" <orsonzhai@gmail.com>,
"Baolin Wang" <baolin.wang@linux.alibaba.com>,
"Chunyan Zhang" <zhang.lyra@gmail.com>,
"Patrice Chotard" <patrice.chotard@foss.st.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
"Peter Korsgaard" <jacmet@sunsite.dk>,
"Michal Simek" <michal.simek@amd.com>,
"Aaro Koskinen" <aaro.koskinen@iki.fi>,
"Janusz Krzysztofik" <jmkrzyszt@gmail.com>,
"Tony Lindgren" <tony@atomide.com>,
"Russell King" <linux@armlinux.org.uk>,
"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
bjorn.andersson@oss.qualcomm.com,
"Konrad Dybcio" <konrad.dybcio@oss.qualcomm.com>
Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-omap@vger.kernel.org, linux-mips@vger.kernel.org,
Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>,
aniket.randive@oss.qualcomm.com,
chandana.chiluveru@oss.qualcomm.com,
Praveen Talari <praveen.talari@oss.qualcomm.com>
Subject: [PATCH 4/6] arch: update uart pm callbacks to return int
Date: Thu, 09 Jul 2026 11:55:16 +0530 [thread overview]
Message-ID: <20260709-add_return_check_for_uart_change_pm-v1-4-e85c6ffa8ec4@oss.qualcomm.com> (raw)
In-Reply-To: <20260709-add_return_check_for_uart_change_pm-v1-0-e85c6ffa8ec4@oss.qualcomm.com>
The uart_ops.pm and plat_serial8250_port.pm callback signatures have
been changed from void to int. Update all arch-level implementations
that register a uart pm callback to match.
SA1100 (arch/arm/mach-sa1100/):
Update sa1100_port_fns.pm in include/linux/platform_data/sa11x0-serial.h
to return int. Update the two board-level implementations:
assabet.c: assabet_uart_pm() - controls RS-232 transceiver via GPIO
h3xxx.c: h3xxx_uart_pm() - controls RS-232 transceiver via GPIO
Both have no error path; they return 0.
OMAP1 (arch/arm/mach-omap1/board-ams-delta.c):
modem_pm() controls a regulator and already captures the regulator
enable/disable return value. Update it to return int and propagate
the regulator error instead of only logging it.
Alchemy MIPS (arch/mips/alchemy/common/platform.c):
alchemy_8250_pm() wraps serial8250_do_pm() with UART clock gating.
Update it to return int; return 0 since the clock and pm operations
have no error path here.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
---
arch/arm/mach-omap1/board-ams-delta.c | 10 ++++++----
arch/arm/mach-sa1100/assabet.c | 3 ++-
arch/arm/mach-sa1100/h3xxx.c | 3 ++-
arch/mips/alchemy/common/platform.c | 5 +++--
include/linux/platform_data/sa11x0-serial.h | 2 +-
5 files changed, 14 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 1bec4fa0bd5e..5cc8274013b1 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -758,19 +758,20 @@ static void __init ams_delta_init(void)
omapfb_set_lcd_config(&ams_delta_lcd_config);
}
-static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
+static int modem_pm(struct uart_port *port, unsigned int state,
+ unsigned int old)
{
struct modem_private_data *priv = port->private_data;
int ret;
if (!priv)
- return;
+ return 0;
if (IS_ERR(priv->regulator))
- return;
+ return 0;
if (state == old)
- return;
+ return 0;
if (state == 0)
ret = regulator_enable(priv->regulator);
@@ -783,6 +784,7 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
dev_warn(port->dev,
"ams_delta modem_pm: failed to %sable regulator: %d\n",
state ? "dis" : "en", ret);
+ return ret;
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 2b833aa0212b..48c3372a0f4f 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -649,7 +649,7 @@ fixup_assabet(struct tag *tags, char **cmdline)
}
-static void assabet_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
+static int assabet_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
{
if (port->mapbase == _Ser1UTCR0) {
if (state)
@@ -657,6 +657,7 @@ static void assabet_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
else
ASSABET_BCR_set(ASSABET_BCR_RS232EN);
}
+ return 0;
}
static struct sa1100_port_fns assabet_port_fns __initdata = {
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
index d685f03f51f3..8a307c7ad9de 100644
--- a/arch/arm/mach-sa1100/h3xxx.c
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -83,7 +83,7 @@ static struct resource h3xxx_flash_resource =
/*
* H3xxx uart support
*/
-static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
+static int h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
{
if (port->mapbase == _Ser3UTCR0) {
if (!gpio_request(H3XXX_EGPIO_RS232_ON, "RS232 transceiver")) {
@@ -94,6 +94,7 @@ static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
__func__);
}
}
+ return 0;
}
/*
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 02bf02164752..ef39cf52b168 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -28,8 +28,8 @@
#include <prom.h>
-static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
- unsigned int old_state)
+static int alchemy_8250_pm(struct uart_port *port, unsigned int state,
+ unsigned int old_state)
{
#ifdef CONFIG_SERIAL_8250
switch (state) {
@@ -46,6 +46,7 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
break;
}
#endif
+ return 0;
}
#define PORT(_base, _irq) \
diff --git a/include/linux/platform_data/sa11x0-serial.h b/include/linux/platform_data/sa11x0-serial.h
index a88096bc74e4..be14a0152787 100644
--- a/include/linux/platform_data/sa11x0-serial.h
+++ b/include/linux/platform_data/sa11x0-serial.h
@@ -18,7 +18,7 @@ struct uart_port;
struct sa1100_port_fns {
void (*set_mctrl)(struct uart_port *, u_int);
u_int (*get_mctrl)(struct uart_port *);
- void (*pm)(struct uart_port *, u_int, u_int);
+ int (*pm)(struct uart_port *port, u_int state, u_int oldstate);
int (*set_wake)(struct uart_port *, u_int);
};
--
2.34.1
next prev parent reply other threads:[~2026-07-09 6:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-09 6:25 [PATCH 0/6] tty: serial: propagate errors from uart_ops.pm callback Praveen Talari
2026-07-09 6:25 ` [PATCH 1/6] tty: serial: change uart_ops.pm callback to return int Praveen Talari
2026-07-09 6:25 ` [PATCH 2/6] serial: 8250: update .pm callbacks " Praveen Talari
2026-07-09 6:25 ` [PATCH 3/6] tty: serial: " Praveen Talari
2026-07-09 6:25 ` Praveen Talari [this message]
2026-07-09 6:25 ` [PATCH 5/6] tty: serial: propagate uart_configure_port failure to uart_add_one_port Praveen Talari
2026-07-09 6:25 ` [PATCH 6/6] serial: qcom-geni: check return value of pm_runtime_resume_and_get() Praveen Talari
2026-07-09 6:53 ` [PATCH 0/6] tty: serial: propagate errors from uart_ops.pm callback Jiri Slaby
2026-07-09 8:52 ` Praveen Talari
2026-07-09 10:16 ` Andy Shevchenko
2026-07-09 12:45 ` Praveen Talari
2026-07-09 7:31 ` Andy Shevchenko
2026-07-10 4:37 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260709-add_return_check_for_uart_change_pm-v1-4-e85c6ffa8ec4@oss.qualcomm.com \
--to=praveen.talari@oss.qualcomm.com \
--cc=aaro.koskinen@iki.fi \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@foss.st.com \
--cc=alim.akhtar@samsung.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=aniket.randive@oss.qualcomm.com \
--cc=baolin.wang@linux.alibaba.com \
--cc=bjorn.andersson@oss.qualcomm.com \
--cc=chandana.chiluveru@oss.qualcomm.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=gregkh@linuxfoundation.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jacmet@sunsite.dk \
--cc=jirislaby@kernel.org \
--cc=jmkrzyszt@gmail.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=matthias.bgg@gmail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=michal.simek@amd.com \
--cc=mukesh.savaliya@oss.qualcomm.com \
--cc=nicolas.ferre@microchip.com \
--cc=orsonzhai@gmail.com \
--cc=patrice.chotard@foss.st.com \
--cc=peter.griffin@linaro.org \
--cc=richard.genoud@bootlin.com \
--cc=tony@atomide.com \
--cc=tsbogend@alpha.franken.de \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox