[PATCH net] net: airoha: keep PPE offload when NPU refuses flow stats

[SAYANTAN NANDY <sayantann11@gmail.com>]

From: Chad Monroe <chad@monroe.io>

With flow stats enabled, PPE offload setup requests flow statistics
from the NPU. If the running NPU firmware does not support flow
counters, the request fails and the current setup path aborts PPE
offload.

Treat flow statistics as an optional capability so that a failure to
set up the counters does not prevent normal PPE offload. Record
whether flow statistics are available and continue PPE initialization
when the NPU refuses the flow-statistics request.

Also treat a zero NPU statistics address returned by the firmware as a
refusal. A zero address does not provide a usable counter region and
must not be passed to the address mapping path.

When flow statistics are unavailable, PPE continues to operate
without NPU flow counters while retaining normal offload functionality.

This combines the original SmartRG/Airoha fixes for:
- keeping PPE offload active when the NPU refuses flow statistics
- treating a zero NPU statistics address as a flow-statistics refusal

Based on the original SmartRG/Airoha work by Chad Monroe:
5ce96ab ("SDG-9458: keep PPE offload when NPU refuses flow stats")
0ad8528 ("SDG-9458: airoha: treat a zero NPU stats address as a refusal")
Fixes: b81e0f2b58be ("net: airoha: Add FLOW_CLS_STATS callback support")
Signed-off-by: Chad Monroe <chad@monroe.io>
Signed-off-by: SAYANTAN NANDY <sayantann11@gmail.com>
---
 drivers/net/ethernet/airoha/airoha_eth.h  |  1 +
 drivers/net/ethernet/airoha/airoha_npu.c  |  8 ++++++++
 drivers/net/ethernet/airoha/airoha_ppe.c  | 20 +++++++++++++-------
 drivers/net/ethernet/airoha/airoha_regs.h |  2 ++
 4 files changed, 24 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/airoha/airoha_eth.h b/drivers/net/ethernet/airoha/airoha_eth.h
index 8277c1c87bb3..bd5a94fce843 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.h
+++ b/drivers/net/ethernet/airoha/airoha_eth.h
@@ -617,6 +617,7 @@ struct airoha_ppe {
 
 	void *foe;
 	dma_addr_t foe_dma;
+	bool flow_stats;
 
 	struct rhashtable l2_flows;
 
diff --git a/drivers/net/ethernet/airoha/airoha_npu.c b/drivers/net/ethernet/airoha/airoha_npu.c
index 4d3195eb00f7..b32a01dbe06b 100644
--- a/drivers/net/ethernet/airoha/airoha_npu.c
+++ b/drivers/net/ethernet/airoha/airoha_npu.c
@@ -450,6 +450,14 @@ static int airoha_npu_ppe_stats_setup(struct airoha_npu *npu,
 	if (err)
 		goto out;
 
+	/* The firmware reports success with a zero address when its SRAM
+	 * pool has no room left for the counters.
+	 */
+	if (!ppe_data->stats_info.npu_stats_addr) {
+		err = -ENOSPC;
+		goto out;
+	}
+
 	npu->stats = devm_ioremap(npu->dev,
 				  ppe_data->stats_info.npu_stats_addr,
 				  size);
diff --git a/drivers/net/ethernet/airoha/airoha_ppe.c b/drivers/net/ethernet/airoha/airoha_ppe.c
index 92611802801e..fbc200614de3 100644
--- a/drivers/net/ethernet/airoha/airoha_ppe.c
+++ b/drivers/net/ethernet/airoha/airoha_ppe.c
@@ -37,10 +37,7 @@ static const struct rhashtable_params airoha_l2_flow_table_params = {
 
 static int airoha_ppe_get_num_stats_entries(struct airoha_ppe *ppe)
 {
-	if (!IS_ENABLED(CONFIG_NET_AIROHA_FLOW_STATS))
-		return -EOPNOTSUPP;
-
-	if (airoha_is_7583(ppe->eth))
+	if (!ppe->flow_stats)
 		return -EOPNOTSUPP;
 
 	return PPE_STATS_NUM_ENTRIES;
@@ -144,6 +141,10 @@ static void airoha_ppe_hw_init(struct airoha_ppe *ppe)
 	sram_ppe_num_data_entries =
 		PPE_RAM_NUM_ENTRIES_SHIFT(sram_ppe_num_data_entries);
 
+	if (ppe->flow_stats)
+		airoha_fe_rmw(eth, PSE_FC_CFG, PSE_PORT6_SHARE_DIS,
+			      FIELD_PREP(PSE_PORT6_SHARE_DIS, 0));
+
 	for (i = 0; i < eth->soc->num_ppe; i++) {
 		airoha_fe_wr(eth, REG_PPE_TB_BASE(i),
 			     ppe->foe_dma + sram_tb_size);
@@ -1456,10 +1457,13 @@ static int airoha_ppe_offload_setup(struct airoha_eth *eth)
 	if (ppe_num_stats_entries > 0) {
 		err = npu->ops.ppe_init_stats(npu, ppe->foe_stats_dma,
 					      ppe_num_stats_entries);
-		if (err)
-			goto error_npu_put;
+		if (err) {
+			dev_warn(eth->dev,
+				 "NPU firmware refused flow stats setup (%d), offload runs without flow counters\n",
+				 err);
+			ppe->flow_stats = false;
+		}
 	}
-
 	airoha_ppe_hw_init(ppe);
 	airoha_ppe_foe_flow_stats_reset(ppe, npu);
 
@@ -1608,6 +1612,8 @@ int airoha_ppe_init(struct airoha_eth *eth)
 	ppe->dev.priv = ppe;
 	ppe->eth = eth;
 	eth->ppe = ppe;
+	ppe->flow_stats = IS_ENABLED(CONFIG_NET_AIROHA_FLOW_STATS) &&
+			  !airoha_is_7583(eth);
 
 	ppe_num_entries = airoha_ppe_get_total_num_entries(ppe);
 	foe_size = ppe_num_entries * sizeof(struct airoha_foe_entry);
diff --git a/drivers/net/ethernet/airoha/airoha_regs.h b/drivers/net/ethernet/airoha/airoha_regs.h
index 442b48c9b991..aee06c058586 100644
--- a/drivers/net/ethernet/airoha/airoha_regs.h
+++ b/drivers/net/ethernet/airoha/airoha_regs.h
@@ -72,6 +72,8 @@
 #define PSE_CFG_OQ_RSV_MASK		GENMASK(13, 0)
 
 #define PSE_FQ_CFG			0x008c
+#define PSE_FC_CFG			0x0098
+#define PSE_PORT6_SHARE_DIS		BIT(22)
 #define PSE_FQ_LIMIT_MASK		GENMASK(14, 0)
 
 #define REG_FE_PSE_BUF_SET		0x0090
-- 
2.43.0