Re: [PATCH] wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain

["Mingyen Hsieh (謝明諺)" <Mingyen.Hsieh@mediatek.com>]

On Mon, 2024-04-15 at 12:26 +0200, Nicolas Escande wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  On Mon Apr 15, 2024 at 7:53 AM CEST, Mingyen Hsieh (謝明諺) wrote:
> > On Fri, 2024-04-12 at 11:27 +0200, Nicolas Escande wrote:
> > >   
> > > External email : Please do not click links or open attachments
> until
> > > you have verified the sender or the content.
> > >  On Fri Apr 12, 2024 at 10:53 AM CEST, Mingyen Hsieh wrote:
> > > > From: Leon Yen <leon.yen@mediatek.com>
> > > >
> > > > Some countries have strict RF restrictions where changing the
> > > regulatory
> > > > domain dynamically based on the connected AP is not acceptable.
> > > > This patch disables Beacon country IE hinting when a valid
> country
> > > code
> > > > is set from usersland (e.g., by system using iw or CRDA).
> > > 
> > > I always had trouble fully understanding the regulation but isn't
> the
> > > country
> > > code IE sole purpose to adapt the regulatory of the client ? 
> > > 
> > Hi Nicolas,
> >
> > Yes, it is. However, if the users have set the specific country
> code
> > based on their region to the driver, they do not expect the country
> > setting to be changed by the country code IE as the AP cannot be
> > entirely trusted.
> 
> Hi,
> 
> In AP mode, I understand that the hardware/firmware (and so user mode
> to some
> extend) is the source of truth about which country/market the product
> has passed
> certification and what not. Thus the country code of an AP should be
> trusted.
> If you put an AP from another market at some place, you are
> responsible for that
> 
> But in STA mode the end user should not need to know which regulation
> follow,
> right ? The AP's Country code IE is where the sta gets the final
> info. So no,
> the AP should be trusted, and the user should not (and not the other
> way around)
> 
> Of course, I am no an expert on this. I just want to check if there
> was some
> though behind this change. You guys make Wifi chips, you know what
> you are doing
> 
> Thanks
> >
> > Best Regards,
> > Yen.
> >
> > > >
> > > > Signed-off-by: Leon Yen <leon.yen@mediatek.com>
> > > > Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
> > > > ---
> > > >  drivers/net/wireless/mediatek/mt76/mt7921/init.c | 7 +++++++
> > > >  1 file changed, 7 insertions(+)
> > > >
> > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > index ef0c721d26e3..3c9a5fcd6924 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > @@ -135,6 +135,13 @@ mt7921_regd_notifier(struct wiphy *wiphy,
> > > >  dev->mt76.region = request->dfs_region;
> > > >  dev->country_ie_env = request->country_ie_env;
> > > >  
> > > > +if (request->initiator == NL80211_REGDOM_SET_BY_USER) {
> > > > +if (dev->mt76.alpha2[0] == '0' && dev->mt76.alpha2[1] == '0')
> > > > +wiphy->regulatory_flags &= ~REGULATORY_COUNTRY_IE_IGNORE;
> > > > +else
> > > > +wiphy->regulatory_flags |= REGULATORY_COUNTRY_IE_IGNORE;
> > > > +}
> > > > +
> > > >  if (pm->suspended)
> > > >  return;
> > > >  
> > > 
> 
Hi nbd,

May I ask about the status of this patch?

Thanks.