Re: [PATCH v4 6/6] arm64: dts: qcom: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties

[Alexander Stein <alexander.stein@ew.tq-group.com>]

Am Montag, 24. Juli 2023, 20:04:00 CEST schrieb Heiko Stuebner:
> Am Montag, 24. Juli 2023, 12:39:13 CEST schrieb Alexander Stein:
> > Use id-gpios and vbus-gpios instead.
> > 
> > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > Reviewed-by: AngeloGioacchino Del Regno
> > <angelogioacchino.delregno@collabora.com> Acked-by: Shawn Guo
> > <shawnguo@kernel.org>
> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > ---
> > 
> >  arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi                 | 2 +-
> 
> sorry to be a spoilsport, but Rockchip is not part of qcom ;-) .

Oh, I'm pretty sure I splitted them properly, so I probably accidentally 
squashed them again somehow :(

> I don't have a massive problem with this going through the qcom tree
> though, so if you don't respin,
> 
> Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip

Okay, thanks

Best regards,
Alexander

> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> > b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index
> > aa3e21bd6c8f..20e3f41efe97 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> > @@ -27,7 +27,7 @@ module_led: led-0 {
> > 
> >  	extcon_usb3: extcon-usb3 {
> >  	
> >  		compatible = "linux,extcon-usb-gpio";
> > 
> > -		id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
> > +		id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
> > 
> >  		pinctrl-names = "default";
> >  		pinctrl-0 = <&usb3_id>;
> >  	
> >  	};


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/