From: Matthias Brugger <matthias.bgg@gmail.com>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
yong.wu@mediatek.com
Cc: krzysztof.kozlowski@linaro.org, robh+dt@kernel.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
konrad.dybcio@somainline.org, marijn.suijten@somainline.org,
martin.botka@somainline.org,
~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, paul.bouchara@somainline.org,
kernel@collabora.com
Subject: Re: [PATCH v2 2/2] memory: mtk-smi: Add support for MT6795 Helio X10
Date: Mon, 16 May 2022 13:32:25 +0200 [thread overview]
Message-ID: <6f96e6f2-b614-3219-3302-da1679565722@gmail.com> (raw)
In-Reply-To: <20220513150633.387200-3-angelogioacchino.delregno@collabora.com>
On 13/05/2022 17:06, AngeloGioacchino Del Regno wrote:
> The MediaTek Helio X10 (MT6795) SoC has 5 LARBs and one common SMI
> instance without any sub-common and without GALS.
>
> While the smi-common configuration is specific to this SoC, on the
> LARB side, this is similar to MT8173, in the sense that it doesn't
> need the port in LARB, and the register layout is also compatible
> with that one, which makes us able to fully reuse the smi-larb
> platform data struct that was introduced for MT8173.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> ---
> drivers/memory/mtk-smi.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index 86a3d34f418e..7e7c3ede19e4 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -21,11 +21,13 @@
> /* SMI COMMON */
> #define SMI_L1LEN 0x100
>
> +#define SMI_L1_ARB 0x200
> #define SMI_BUS_SEL 0x220
> #define SMI_BUS_LARB_SHIFT(larbid) ((larbid) << 1)
> /* All are MMU0 defaultly. Only specialize mmu1 here. */
> #define F_MMU1_LARB(larbid) (0x1 << SMI_BUS_LARB_SHIFT(larbid))
>
> +#define SMI_FIFO_TH0 0x230
> #define SMI_M4U_TH 0x234
> #define SMI_FIFO_TH1 0x238
> #define SMI_FIFO_TH2 0x23c
> @@ -360,6 +362,7 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
> {.compatible = "mediatek,mt2701-smi-larb", .data = &mtk_smi_larb_mt2701},
> {.compatible = "mediatek,mt2712-smi-larb", .data = &mtk_smi_larb_mt2712},
> {.compatible = "mediatek,mt6779-smi-larb", .data = &mtk_smi_larb_mt6779},
> + {.compatible = "mediatek,mt6795-smi-larb", .data = &mtk_smi_larb_mt8173},
> {.compatible = "mediatek,mt8167-smi-larb", .data = &mtk_smi_larb_mt8167},
> {.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173},
> {.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183},
> @@ -541,6 +544,13 @@ static struct platform_driver mtk_smi_larb_driver = {
> }
> };
>
> +static const struct mtk_smi_reg_pair mtk_smi_common_mt6795_init[SMI_COMMON_INIT_REGS_NR] = {
> + {SMI_L1_ARB, 0x1b},
> + {SMI_M4U_TH, 0xce810c85},
> + {SMI_FIFO_TH1, 0x43214c8},
> + {SMI_FIFO_TH0, 0x191f},
> +};
> +
> static const struct mtk_smi_reg_pair mtk_smi_common_mt8195_init[SMI_COMMON_INIT_REGS_NR] = {
> {SMI_L1LEN, 0xb},
> {SMI_M4U_TH, 0xe100e10},
> @@ -565,6 +575,12 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
> F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
> };
>
> +static const struct mtk_smi_common_plat mtk_smi_common_mt6795 = {
> + .type = MTK_SMI_GEN2,
> + .bus_sel = BIT(0),
> + .init = mtk_smi_common_mt6795_init,
> +};
> +
> static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
> .type = MTK_SMI_GEN2,
> .has_gals = true,
> @@ -609,6 +625,7 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
> {.compatible = "mediatek,mt2701-smi-common", .data = &mtk_smi_common_gen1},
> {.compatible = "mediatek,mt2712-smi-common", .data = &mtk_smi_common_gen2},
> {.compatible = "mediatek,mt6779-smi-common", .data = &mtk_smi_common_mt6779},
> + {.compatible = "mediatek,mt6795-smi-common", .data = &mtk_smi_common_mt6795},
> {.compatible = "mediatek,mt8167-smi-common", .data = &mtk_smi_common_gen2},
> {.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2},
> {.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183},
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2022-05-16 11:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-13 15:06 [PATCH v2 0/2] MediaTek Helio X10 MT6795 - SMI Support AngeloGioacchino Del Regno
2022-05-13 15:06 ` [PATCH v2 1/2] dt-bindings: memory: mtk-smi: Add MT6795 Helio X10 bindings AngeloGioacchino Del Regno
2022-05-16 11:32 ` Matthias Brugger
2022-05-18 0:36 ` Rob Herring
2022-05-13 15:06 ` [PATCH v2 2/2] memory: mtk-smi: Add support for MT6795 Helio X10 AngeloGioacchino Del Regno
2022-05-16 11:32 ` Matthias Brugger [this message]
2022-05-17 6:37 ` Yong Wu
2022-05-17 8:27 ` AngeloGioacchino Del Regno
2022-05-17 9:44 ` Yong Wu
2022-05-17 10:30 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6f96e6f2-b614-3219-3302-da1679565722@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@collabora.com \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=marijn.suijten@somainline.org \
--cc=martin.botka@somainline.org \
--cc=paul.bouchara@somainline.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=yong.wu@mediatek.com \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).