* Re: [PATCH v4 16/26] docs: Fix more broken references
From: Miguel Ojeda @ 2018-06-15 16:41 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, Mauro Carvalho Chehab,
linux-kernel, linux-clk, devicetree, linux-pm, dri-devel,
linux-arm-kernel, linux-mmc, linux-samsung-soc,
Network Development, linux-usb, linux-rockchip, linux-hwmon,
intel-wired-lan, alsa-devel, linux-fsdevel, linux-mediatek
In-Reply-To: <48f1131d560eba1d0758e3a7714593f1d878d3de.1529079120.git.mchehab+samsung@kernel.org>
On Fri, Jun 15, 2018 at 6:30 PM, Mauro Carvalho Chehab
<mchehab+samsung@kernel.org> wrote:
> As we move stuff around, some doc references are broken. Fix some of
> them via this script:
> ./scripts/documentation-file-ref-check --fix
>
> Manually checked that produced results are valid.
>
> Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
> Acked-by: Takashi Iwai <tiwai@suse.de>
> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Acked-by: Guenter Roeck <linux@roeck-us.net>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> ---
> .../bindings/clock/st/st,clkgen.txt | 8 ++++----
> .../devicetree/bindings/clock/ti/gate.txt | 2 +-
> .../bindings/clock/ti/interface.txt | 2 +-
> .../bindings/cpufreq/cpufreq-mediatek.txt | 2 +-
> .../bindings/devfreq/rk3399_dmc.txt | 2 +-
> .../bindings/gpu/arm,mali-midgard.txt | 2 +-
> .../bindings/gpu/arm,mali-utgard.txt | 2 +-
> .../devicetree/bindings/mfd/mt6397.txt | 2 +-
> .../devicetree/bindings/mfd/sun6i-prcm.txt | 2 +-
> .../bindings/mmc/exynos-dw-mshc.txt | 2 +-
> .../devicetree/bindings/net/dsa/ksz.txt | 2 +-
> .../devicetree/bindings/net/dsa/mt7530.txt | 2 +-
> .../devicetree/bindings/power/fsl,imx-gpc.txt | 2 +-
> .../bindings/power/wakeup-source.txt | 2 +-
> .../devicetree/bindings/usb/rockchip,dwc3.txt | 2 +-
> Documentation/hwmon/ina2xx | 2 +-
> Documentation/maintainer/pull-requests.rst | 2 +-
> Documentation/translations/ko_KR/howto.rst | 2 +-
> MAINTAINERS | 20 +++++++++----------
> drivers/net/ethernet/intel/Kconfig | 8 ++++----
> drivers/soundwire/stream.c | 8 ++++----
> fs/Kconfig.binfmt | 2 +-
> fs/binfmt_misc.c | 2 +-
> 23 files changed, 41 insertions(+), 41 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
> index 7364953d0d0b..45ac19bfa0a9 100644
> --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
> +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
> @@ -31,10 +31,10 @@ This binding uses the common clock binding[1].
> Each subnode should use the binding described in [2]..[7]
>
> [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
> -[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
> -[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
> -[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
> +[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
> +[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
> +[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
> +[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
>
>
> Required properties:
> diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
> index 03f8fdee62a7..56d603c1f716 100644
> --- a/Documentation/devicetree/bindings/clock/ti/gate.txt
> +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
> @@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
> that is used.
>
> [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -[2] Documentation/devicetree/bindings/clock/gate-clock.txt
> +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
> [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
>
> Required properties:
> diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
> index 3111a409fea6..3f4704040140 100644
> --- a/Documentation/devicetree/bindings/clock/ti/interface.txt
> +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
> @@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
> clock) and hardware autoidle enable / disable.
>
> [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -[2] Documentation/devicetree/bindings/clock/gate-clock.txt
> +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
>
> Required properties:
> - compatible : shall be one of:
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
> index d36f07e0a2bb..0551c78619de 100644
> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
> @@ -8,7 +8,7 @@ Required properties:
> "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
> source (usually MAINPLL) when the original CPU PLL is under
> transition and not stable yet.
> - Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
> + Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
> generic clock consumer properties.
> - operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
> for detail.
> diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> index d6d2833482c9..fc2bcbe26b1e 100644
> --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> @@ -12,7 +12,7 @@ Required properties:
> - clocks: Phandles for clock specified in "clock-names" property
> - clock-names : The name of clock used by the DFI, must be
> "pclk_ddr_mon";
> -- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt
> +- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt
> for details.
> - center-supply: DMC supply node.
> - status: Marks the node enabled/disabled.
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
> index 039219df05c5..18a2cde2e5f3 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
> @@ -34,7 +34,7 @@ Optional properties:
> - mali-supply : Phandle to regulator for the Mali device. Refer to
> Documentation/devicetree/bindings/regulator/regulator.txt for details.
>
> -- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt
> +- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
> for details.
>
>
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> index c1f65d1dac1d..63cd91176a68 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
> @@ -44,7 +44,7 @@ Optional properties:
>
> - memory-region:
> Memory region to allocate from, as defined in
> - Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt
> + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
>
> - mali-supply:
> Phandle to regulator for the Mali device, as defined in
> diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
> index d1df77f4d655..0ebd08af777d 100644
> --- a/Documentation/devicetree/bindings/mfd/mt6397.txt
> +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
> @@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
> It is interfaced to host controller using SPI interface by a proprietary hardware
> called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
> See the following for pwarp node definitions:
> -Documentation/devicetree/bindings/soc/pwrap.txt
> +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
>
> This document describes the binding for MFD device and its sub module.
>
> diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
> index dd2c06540485..4d21ffdb0fc1 100644
> --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
> +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
> @@ -9,7 +9,7 @@ Required properties:
>
> The prcm node may contain several subdevices definitions:
> - see Documentation/devicetree/clk/sunxi.txt for clock devices
> - - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
> + - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset
> controller devices
>
>
> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> index a58c173b7ab9..0419a63f73a0 100644
> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> @@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host)
> rest of the gpios (depending on the bus-width property) are the data lines in
> no particular order. The format of the gpio specifier depends on the gpio
> controller.
> -(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
> +(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
>
> Example:
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
> index fd23904ac68e..a700943218ca 100644
> --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
> +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
> @@ -6,7 +6,7 @@ Required properties:
> - compatible: For external switch chips, compatible string must be exactly one
> of: "microchip,ksz9477"
>
> -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
> +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
> required and optional properties.
>
> Examples:
> diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
> index a9bc27b93ee3..aa3527f71fdc 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
> +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
> @@ -31,7 +31,7 @@ Required properties for the child nodes within ports container:
> - phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
> "cpu".
>
> -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
> +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
> required, optional properties and how the integrated switch subnodes must
> be specified.
>
> diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
> index b31d6bbeee16..726ec2875223 100644
> --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
> +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
> @@ -14,7 +14,7 @@ Required properties:
> datasheet
> - interrupts: Should contain one interrupt specifier for the GPC interrupt
> - clocks: Must contain an entry for each entry in clock-names.
> - See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
> + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> - clock-names: Must include the following entries:
> - ipg
>
> diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
> index 5d254ab13ebf..cfd74659fbed 100644
> --- a/Documentation/devicetree/bindings/power/wakeup-source.txt
> +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
> @@ -22,7 +22,7 @@ List of legacy properties and respective binding document
> 3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt
> 4. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
> Documentation/devicetree/bindings/mfd/tc3589x.txt
> - Documentation/devicetree/bindings/input/ads7846.txt
> + Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
> 5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
> 6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt
> 7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
> diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> index 50a31536e975..252a05c5d976 100644
> --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> @@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of
> the node is not important. The content of the node is defined in dwc3.txt.
>
> Phy documentation is provided in the following places:
> -Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
> +Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
>
> Example device nodes:
>
> diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
> index cfd31d94c872..72d16f08e431 100644
> --- a/Documentation/hwmon/ina2xx
> +++ b/Documentation/hwmon/ina2xx
> @@ -53,7 +53,7 @@ bus supply voltage.
>
> The shunt value in micro-ohms can be set via platform data or device tree at
> compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
> -refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
> +refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings
> if the device tree is used.
>
> Additionally ina226 supports update_interval attribute as described in
> diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst
> index a19db3458b56..22b271de0304 100644
> --- a/Documentation/maintainer/pull-requests.rst
> +++ b/Documentation/maintainer/pull-requests.rst
> @@ -41,7 +41,7 @@ named ``char-misc-next``, you would be using the following command::
>
> that will create a signed tag called ``char-misc-4.15-rc1`` based on the
> last commit in the ``char-misc-next`` branch, and sign it with your gpg key
> -(see :ref:`Documentation/maintainer/configure_git.rst <configuregit>`).
> +(see :ref:`Documentation/maintainer/configure-git.rst <configuregit>`).
>
> Linus will only accept pull requests based on a signed tag. Other
> maintainers may differ.
> diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst
> index 624654bdcd8a..a8197e072599 100644
> --- a/Documentation/translations/ko_KR/howto.rst
> +++ b/Documentation/translations/ko_KR/howto.rst
> @@ -160,7 +160,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다.
> 독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기
> 때문이다.
>
> - :ref:`Documentation/process/stable_kernel_rules.rst <stable_kernel_rules>`
> + :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
> 이 문서는 안정적인 커널 배포가 이루어지는 규칙을 설명하고 있으며
> 여러분들이 이러한 배포들 중 하나에 변경을 하길 원한다면
> 무엇을 해야 하는지를 설명한다.
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 09554034be46..5871dd5060f6 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4513,7 +4513,7 @@ DRM DRIVER FOR ILITEK ILI9225 PANELS
> M: David Lechner <david@lechnology.com>
> S: Maintained
> F: drivers/gpu/drm/tinydrm/ili9225.c
> -F: Documentation/devicetree/bindings/display/ili9225.txt
> +F: Documentation/devicetree/bindings/display/ilitek,ili9225.txt
>
> DRM DRIVER FOR INTEL I810 VIDEO CARDS
> S: Orphan / Obsolete
> @@ -4599,13 +4599,13 @@ DRM DRIVER FOR SITRONIX ST7586 PANELS
> M: David Lechner <david@lechnology.com>
> S: Maintained
> F: drivers/gpu/drm/tinydrm/st7586.c
> -F: Documentation/devicetree/bindings/display/st7586.txt
> +F: Documentation/devicetree/bindings/display/sitronix,st7586.txt
>
> DRM DRIVER FOR SITRONIX ST7735R PANELS
> M: David Lechner <david@lechnology.com>
> S: Maintained
> F: drivers/gpu/drm/tinydrm/st7735r.c
> -F: Documentation/devicetree/bindings/display/st7735r.txt
> +F: Documentation/devicetree/bindings/display/sitronix,st7735r.txt
>
> DRM DRIVER FOR TDFX VIDEO CARDS
> S: Orphan / Obsolete
> @@ -4824,7 +4824,7 @@ M: Eric Anholt <eric@anholt.net>
> S: Supported
> F: drivers/gpu/drm/v3d/
> F: include/uapi/drm/v3d_drm.h
> -F: Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt
> +F: Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
> T: git git://anongit.freedesktop.org/drm/drm-misc
>
> DRM DRIVERS FOR VC4
> @@ -5735,7 +5735,7 @@ M: Madalin Bucur <madalin.bucur@nxp.com>
> L: netdev@vger.kernel.org
> S: Maintained
> F: drivers/net/ethernet/freescale/fman
> -F: Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> +F: Documentation/devicetree/bindings/net/fsl-fman.txt
>
> FREESCALE QORIQ PTP CLOCK DRIVER
> M: Yangbo Lu <yangbo.lu@nxp.com>
> @@ -7425,7 +7425,7 @@ M: Linus Walleij <linus.walleij@linaro.org>
> L: linux-iio@vger.kernel.org
> S: Maintained
> F: drivers/iio/gyro/mpu3050*
> -F: Documentation/devicetree/bindings/iio/gyroscope/inv,mpu3050.txt
> +F: Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
>
> IOC3 ETHERNET DRIVER
> M: Ralf Baechle <ralf@linux-mips.org>
> @@ -8700,7 +8700,7 @@ M: Guenter Roeck <linux@roeck-us.net>
> L: linux-hwmon@vger.kernel.org
> S: Maintained
> F: Documentation/hwmon/max6697
> -F: Documentation/devicetree/bindings/i2c/max6697.txt
> +F: Documentation/devicetree/bindings/hwmon/max6697.txt
> F: drivers/hwmon/max6697.c
> F: include/linux/platform_data/max6697.h
>
> @@ -9080,7 +9080,7 @@ M: Martin Donnelly <martin.donnelly@ge.com>
> M: Martyn Welch <martyn.welch@collabora.co.uk>
> S: Maintained
> F: drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
> -F: Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
> +F: Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
>
> MEGARAID SCSI/SAS DRIVERS
> M: Kashyap Desai <kashyap.desai@broadcom.com>
> @@ -10728,7 +10728,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER
> M: Willy Tarreau <willy@haproxy.com>
> M: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
> S: Odd Fixes
> -F: Documentation/misc-devices/lcd-panel-cgram.txt
> +F: Documentation/auxdisplay/lcd-panel-cgram.txt
> F: drivers/misc/panel.c
>
For Documentation/auxdisplay/lcd-panel-cgram.txt:
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
> PARALLEL PORT SUBSYSTEM
> @@ -13291,7 +13291,7 @@ M: Vinod Koul <vkoul@kernel.org>
> L: alsa-devel@alsa-project.org (moderated for non-subscribers)
> T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
> S: Supported
> -F: Documentation/sound/alsa/compress_offload.txt
> +F: Documentation/sound/designs/compress-offload.rst
> F: include/sound/compress_driver.h
> F: include/uapi/sound/compress_*
> F: sound/core/compress_offload.c
> diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
> index 14d287bed33c..1ab613eb5796 100644
> --- a/drivers/net/ethernet/intel/Kconfig
> +++ b/drivers/net/ethernet/intel/Kconfig
> @@ -33,7 +33,7 @@ config E100
> to identify the adapter.
>
> More specific information on configuring the driver is in
> - <file:Documentation/networking/e100.txt>.
> + <file:Documentation/networking/e100.rst>.
>
> To compile this driver as a module, choose M here. The module
> will be called e100.
> @@ -49,7 +49,7 @@ config E1000
> <http://support.intel.com>
>
> More specific information on configuring the driver is in
> - <file:Documentation/networking/e1000.txt>.
> + <file:Documentation/networking/e1000.rst>.
>
> To compile this driver as a module, choose M here. The module
> will be called e1000.
> @@ -94,7 +94,7 @@ config IGB
> <http://support.intel.com>
>
> More specific information on configuring the driver is in
> - <file:Documentation/networking/e1000.txt>.
> + <file:Documentation/networking/e1000.rst>.
>
> To compile this driver as a module, choose M here. The module
> will be called igb.
> @@ -130,7 +130,7 @@ config IGBVF
> <http://support.intel.com>
>
> More specific information on configuring the driver is in
> - <file:Documentation/networking/e1000.txt>.
> + <file:Documentation/networking/e1000.rst>.
>
> To compile this driver as a module, choose M here. The module
> will be called igbvf.
> diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
> index 8974a0fcda1b..4b5e250e8615 100644
> --- a/drivers/soundwire/stream.c
> +++ b/drivers/soundwire/stream.c
> @@ -1291,7 +1291,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
> *
> * @stream: Soundwire stream
> *
> - * Documentation/soundwire/stream.txt explains this API in detail
> + * Documentation/driver-api/soundwire/stream.rst explains this API in detail
> */
> int sdw_prepare_stream(struct sdw_stream_runtime *stream)
> {
> @@ -1348,7 +1348,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream)
> *
> * @stream: Soundwire stream
> *
> - * Documentation/soundwire/stream.txt explains this API in detail
> + * Documentation/driver-api/soundwire/stream.rst explains this API in detail
> */
> int sdw_enable_stream(struct sdw_stream_runtime *stream)
> {
> @@ -1400,7 +1400,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
> *
> * @stream: Soundwire stream
> *
> - * Documentation/soundwire/stream.txt explains this API in detail
> + * Documentation/driver-api/soundwire/stream.rst explains this API in detail
> */
> int sdw_disable_stream(struct sdw_stream_runtime *stream)
> {
> @@ -1456,7 +1456,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
> *
> * @stream: Soundwire stream
> *
> - * Documentation/soundwire/stream.txt explains this API in detail
> + * Documentation/driver-api/soundwire/stream.rst explains this API in detail
> */
> int sdw_deprepare_stream(struct sdw_stream_runtime *stream)
> {
> diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
> index 57a27c42b5ac..56df483de619 100644
> --- a/fs/Kconfig.binfmt
> +++ b/fs/Kconfig.binfmt
> @@ -168,7 +168,7 @@ config BINFMT_MISC
> will automatically feed it to the correct interpreter.
>
> You can do other nice things, too. Read the file
> - <file:Documentation/binfmt_misc.txt> to learn how to use this
> + <file:Documentation/admin-guide/binfmt-misc.rst> to learn how to use this
> feature, <file:Documentation/admin-guide/java.rst> for information about how
> to include Java support. and <file:Documentation/admin-guide/mono.rst> for
> information about how to include Mono-based .NET support.
> diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
> index 4de191563261..4b5fff31ef27 100644
> --- a/fs/binfmt_misc.c
> +++ b/fs/binfmt_misc.c
> @@ -4,7 +4,7 @@
> * Copyright (C) 1997 Richard Günther
> *
> * binfmt_misc detects binaries via a magic or filename extension and invokes
> - * a specified wrapper. See Documentation/binfmt_misc.txt for more details.
> + * a specified wrapper. See Documentation/admin-guide/binfmt-misc.rst for more details.
> */
>
> #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> --
> 2.17.1
>
^ permalink raw reply
* Re: [PATCH v4 00/26] Fix some doc build warnings/errors and broken links
From: Jonathan Corbet @ 2018-06-15 19:09 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
Matthias Brugger, linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1529079119.git.mchehab+samsung@kernel.org>
On Fri, 15 Jun 2018 13:30:28 -0300
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote:
> As discussed during the review of v2, your plans were to merge
> things with potential to conflict with merges by the end of the
> merge window. So, I'm resubmitting it in order to help you with
> that.
Is there any chance you could send them directly Linusward with my ack?
I'm fighting a few real-world complications at the moment, and barely
have time to breathe...
Thanks,
jon
^ permalink raw reply
* Re: [PATCH v4 00/26] Fix some doc build warnings/errors and broken links
From: Mauro Carvalho Chehab @ 2018-06-15 20:52 UTC (permalink / raw)
To: Jonathan Corbet
Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
Matthias Brugger, linux-arm-kernel, linux-mediatek
In-Reply-To: <20180615130951.303a3ebb@lwn.net>
Em Fri, 15 Jun 2018 13:09:51 -0600
Jonathan Corbet <corbet@lwn.net> escreveu:
> On Fri, 15 Jun 2018 13:30:28 -0300
> Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote:
>
> > As discussed during the review of v2, your plans were to merge
> > things with potential to conflict with merges by the end of the
> > merge window. So, I'm resubmitting it in order to help you with
> > that.
>
> Is there any chance you could send them directly Linusward with my ack?
> I'm fighting a few real-world complications at the moment, and barely
> have time to breathe...
Ok, I'll send him a pull request (likely tomorrow), adding your
ack on the patches at this series.
Regards,
Mauro
^ permalink raw reply
* Re: [PATCH v3 16/27] docs: Fix more broken references
From: Stephen Boyd @ 2018-06-15 21:42 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: linux-hwmon, devicetree, alsa-devel, linux-samsung-soc,
linux-mediatek, Jonathan Corbet, netdev, linux-pm, linux-mmc,
linux-kernel, dri-devel, Mauro Carvalho Chehab, linux-rockchip,
linux-usb, intel-wired-lan, Mauro Carvalho Chehab, linux-fsdevel,
linux-clk, linux-arm-kernel
In-Reply-To: <e1bf52a721005b2017434acc54ec5ddc152d6fe4.1528990947.git.mchehab+samsung@kernel.org>
Quoting Mauro Carvalho Chehab (2018-06-14 09:09:01)
> As we move stuff around, some doc references are broken. Fix some of
> them via this script:
> ./scripts/documentation-file-ref-check --fix
>
> Manually checked that produced results are valid.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> ---
> .../devicetree/bindings/clock/st/st,clkgen.txt | 8 ++++----
> .../devicetree/bindings/clock/ti/gate.txt | 2 +-
> .../devicetree/bindings/clock/ti/interface.txt | 2 +-
Acked-by: Stephen Boyd <sboyd@kernel.org>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* [PATCH v4 0/3] Add controls for VP8/VP9 profile
From: Keiichi Watanabe @ 2018-06-18 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Mauro Carvalho Chehab, Tiffany Lin, Andrew-CT Chen,
Matthias Brugger, Stanimir Varbanov, Kyungmin Park, Kamil Debski,
Jeongtae Park, Andrzej Hajda, Hans Verkuil, Keiichi Watanabe,
Smitha T Murthy, Sylwester Nawrocki, Tom Saeger, Sakari Ailus,
Andy Shevchenko, Tomasz Figa, Ricardo Ribalda Delgado
Here is the 4th revision of the patch set that adds controls for VP8/VP9
profiles. Please see v3 cover letter for more details.
<https://lkml.org/lkml/2018/6/14/132>
In this version, I changed the contents that pointed out by Stanimir and Hans.
Changelog
----------
Version 4 changes:
- Remove unnecessary changes in venus drivers.
- Remove unnecessary blank lines in documentations.
- Fix typo and grammar mistakes.
Version 3 changes:
- Add V4L2_CID_MPEG_VIDEO_VP8_PROFILE in v4l2-controls.
- Make V4L2_CID_MPEG_VIDEO_VPX_PROFILE to be an alias of
V4L2_CID_MPEG_VIDEO_VP8_PROFILE.
- Fix the use of V4L2_CID_MPEG_VIDEO_VPX_PROFILE in venus/s5p_mfc drivers.
- Small fix in mtk_vcodec_dec.
Version 2 changes:
- Support V4L2_CID_MPEG_VIDEO_VP9_PROFILE in MediaTek decoder's driver.
Version 1 changes:
- Add V4L2_CID_MPEG_VIDEO_VP9_PROFILE in v4l2-controls.
Keiichi Watanabe (3):
media: v4l2-ctrl: Change control for VP8 profile to menu control
media: v4l2-ctrl: Add control for VP9 profile
media: mtk-vcodec: Support VP9 profile in decoder
.../media/uapi/v4l/extended-controls.rst | 48 +++++++++++++++++--
.../platform/mtk-vcodec/mtk_vcodec_dec.c | 5 ++
.../media/platform/qcom/venus/vdec_ctrls.c | 10 ++--
drivers/media/platform/qcom/venus/venc.c | 4 +-
.../media/platform/qcom/venus/venc_ctrls.c | 10 ++--
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 15 +++---
drivers/media/v4l2-core/v4l2-ctrls.c | 23 ++++++++-
include/uapi/linux/v4l2-controls.h | 18 ++++++-
8 files changed, 110 insertions(+), 23 deletions(-)
--
2.18.0.rc1.244.gcf134e6275-goog
^ permalink raw reply
* [PATCH v4 1/3] media: v4l2-ctrl: Change control for VP8 profile to menu control
From: Keiichi Watanabe @ 2018-06-18 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Mauro Carvalho Chehab, Tiffany Lin, Andrew-CT Chen,
Matthias Brugger, Stanimir Varbanov, Kyungmin Park, Kamil Debski,
Jeongtae Park, Andrzej Hajda, Hans Verkuil, Keiichi Watanabe,
Smitha T Murthy, Sylwester Nawrocki, Tom Saeger, Sakari Ailus,
Andy Shevchenko, Tomasz Figa, Ricardo Ribalda Delgado
In-Reply-To: <20180618075854.12881-1-keiichiw@chromium.org>
Add a menu control V4L2_CID_MPEG_VIDEO_VP8_PROFILE for VP8 profile and make
V4L2_CID_MPEG_VIDEO_VPX_PROFILE an alias of it. This new control is used to
select the desired profile for VP8 encoder and query for supported profiles by
VP8 encoder/decoder.
Though we have originally a control V4L2_CID_MPEG_VIDEO_VPX_PROFILE and its name
contains 'VPX', it works only for VP8 because supported profiles usually differ
between VP8 and VP9. In addition, this control cannot be used for querying since
it is not a menu control but an integer control, which cannot return an
arbitrary set of supported profiles.
The new control V4L2_CID_MPEG_VIDEO_VP8_PROFILE is a menu control as with
controls for other codec profiles. (e.g. H264)
In addition, this patch also fixes the use of V4L2_CID_MPEG_VIDEO_VPX_PROFILE in
drivers of Qualcomm's venus and Samsung's s5p-mfc.
Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org>
---
.../media/uapi/v4l/extended-controls.rst | 25 ++++++++++++++++---
.../media/platform/qcom/venus/vdec_ctrls.c | 10 +++++---
drivers/media/platform/qcom/venus/venc.c | 4 +--
.../media/platform/qcom/venus/venc_ctrls.c | 10 +++++---
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 15 ++++++-----
drivers/media/v4l2-core/v4l2-ctrls.c | 12 ++++++++-
include/uapi/linux/v4l2-controls.h | 11 +++++++-
7 files changed, 64 insertions(+), 23 deletions(-)
diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
index 03931f9b1285..01ef31a934b4 100644
--- a/Documentation/media/uapi/v4l/extended-controls.rst
+++ b/Documentation/media/uapi/v4l/extended-controls.rst
@@ -1955,9 +1955,28 @@ enum v4l2_vp8_golden_frame_sel -
``V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (integer)``
Quantization parameter for a P frame for VP8.
-``V4L2_CID_MPEG_VIDEO_VPX_PROFILE (integer)``
- Select the desired profile for VPx encoder. Acceptable values are 0,
- 1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3.
+.. _v4l2-mpeg-video-vp8-profile:
+
+``V4L2_CID_MPEG_VIDEO_VP8_PROFILE``
+ (enum)
+
+enum v4l2_mpeg_video_vp8_profile -
+ This control allows selecting the profile for VP8 encoder.
+ This is also used to enumerate supported profiles by VP8 encoder or decoder.
+ Possible values are:
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_0``
+ - Profile 0
+ * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_1``
+ - Profile 1
+ * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_2``
+ - Profile 2
+ * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_3``
+ - Profile 3
High Efficiency Video Coding (HEVC/H.265) Control Reference
diff --git a/drivers/media/platform/qcom/venus/vdec_ctrls.c b/drivers/media/platform/qcom/venus/vdec_ctrls.c
index 032839bbc967..f4604b0cd57e 100644
--- a/drivers/media/platform/qcom/venus/vdec_ctrls.c
+++ b/drivers/media/platform/qcom/venus/vdec_ctrls.c
@@ -29,7 +29,7 @@ static int vdec_op_s_ctrl(struct v4l2_ctrl *ctrl)
break;
case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:
- case V4L2_CID_MPEG_VIDEO_VPX_PROFILE:
+ case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:
ctr->profile = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_H264_LEVEL:
@@ -54,7 +54,7 @@ static int vdec_op_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
switch (ctrl->id) {
case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:
- case V4L2_CID_MPEG_VIDEO_VPX_PROFILE:
+ case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:
ret = hfi_session_get_property(inst, ptype, &hprop);
if (!ret)
ctr->profile = hprop.profile_level.profile;
@@ -130,8 +130,10 @@ int vdec_ctrl_init(struct venus_inst *inst)
if (ctrl)
ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
- ctrl = v4l2_ctrl_new_std(&inst->ctrl_handler, &vdec_ctrl_ops,
- V4L2_CID_MPEG_VIDEO_VPX_PROFILE, 0, 3, 1, 0);
+ ctrl = v4l2_ctrl_new_std_menu(&inst->ctrl_handler, &vdec_ctrl_ops,
+ V4L2_CID_MPEG_VIDEO_VP8_PROFILE,
+ V4L2_MPEG_VIDEO_VP8_PROFILE_3,
+ 0, V4L2_MPEG_VIDEO_VP8_PROFILE_0);
if (ctrl)
ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
diff --git a/drivers/media/platform/qcom/venus/venc.c b/drivers/media/platform/qcom/venus/venc.c
index 6b2ce479584e..cba6ef1e2d04 100644
--- a/drivers/media/platform/qcom/venus/venc.c
+++ b/drivers/media/platform/qcom/venus/venc.c
@@ -223,7 +223,7 @@ static int venc_v4l2_to_hfi(int id, int value)
case V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC:
return HFI_H264_ENTROPY_CABAC;
}
- case V4L2_CID_MPEG_VIDEO_VPX_PROFILE:
+ case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:
switch (value) {
case 0:
default:
@@ -756,7 +756,7 @@ static int venc_set_properties(struct venus_inst *inst)
level = venc_v4l2_to_hfi(V4L2_CID_MPEG_VIDEO_H264_LEVEL,
ctr->level.h264);
} else if (inst->fmt_cap->pixfmt == V4L2_PIX_FMT_VP8) {
- profile = venc_v4l2_to_hfi(V4L2_CID_MPEG_VIDEO_VPX_PROFILE,
+ profile = venc_v4l2_to_hfi(V4L2_CID_MPEG_VIDEO_VP8_PROFILE,
ctr->profile.vpx);
level = 0;
} else if (inst->fmt_cap->pixfmt == V4L2_PIX_FMT_MPEG4) {
diff --git a/drivers/media/platform/qcom/venus/venc_ctrls.c b/drivers/media/platform/qcom/venus/venc_ctrls.c
index 21e938a28662..459101728d26 100644
--- a/drivers/media/platform/qcom/venus/venc_ctrls.c
+++ b/drivers/media/platform/qcom/venus/venc_ctrls.c
@@ -101,7 +101,7 @@ static int venc_op_s_ctrl(struct v4l2_ctrl *ctrl)
case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
ctr->profile.h264 = ctrl->val;
break;
- case V4L2_CID_MPEG_VIDEO_VPX_PROFILE:
+ case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:
ctr->profile.vpx = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL:
@@ -248,6 +248,11 @@ int venc_ctrl_init(struct venus_inst *inst)
V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES,
0, V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE);
+ v4l2_ctrl_new_std_menu(&inst->ctrl_handler, &venc_ctrl_ops,
+ V4L2_CID_MPEG_VIDEO_VP8_PROFILE,
+ V4L2_MPEG_VIDEO_VP8_PROFILE_3,
+ 0, V4L2_MPEG_VIDEO_VP8_PROFILE_0);
+
v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
V4L2_CID_MPEG_VIDEO_BITRATE, BITRATE_MIN, BITRATE_MAX,
BITRATE_STEP, BITRATE_DEFAULT);
@@ -256,9 +261,6 @@ int venc_ctrl_init(struct venus_inst *inst)
V4L2_CID_MPEG_VIDEO_BITRATE_PEAK, BITRATE_MIN, BITRATE_MAX,
BITRATE_STEP, BITRATE_DEFAULT_PEAK);
- v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
- V4L2_CID_MPEG_VIDEO_VPX_PROFILE, 0, 3, 1, 0);
-
v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP, 1, 51, 1, 26);
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
index 570f391f2cfd..3ad4f5073002 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
@@ -692,12 +692,12 @@ static struct mfc_control controls[] = {
.default_value = 10,
},
{
- .id = V4L2_CID_MPEG_VIDEO_VPX_PROFILE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .minimum = 0,
- .maximum = 3,
- .step = 1,
- .default_value = 0,
+ .id = V4L2_CID_MPEG_VIDEO_VP8_PROFILE,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .minimum = V4L2_MPEG_VIDEO_VP8_PROFILE_0,
+ .maximum = V4L2_MPEG_VIDEO_VP8_PROFILE_3,
+ .default_value = V4L2_MPEG_VIDEO_VP8_PROFILE_0,
+ .menu_skip_mask = 0,
},
{
.id = V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP,
@@ -2057,7 +2057,7 @@ static int s5p_mfc_enc_s_ctrl(struct v4l2_ctrl *ctrl)
case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP:
p->codec.vp8.rc_p_frame_qp = ctrl->val;
break;
- case V4L2_CID_MPEG_VIDEO_VPX_PROFILE:
+ case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:
p->codec.vp8.profile = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP:
@@ -2711,4 +2711,3 @@ void s5p_mfc_enc_init(struct s5p_mfc_ctx *ctx)
f.fmt.pix_mp.pixelformat = DEF_DST_FMT_ENC;
ctx->dst_fmt = find_format(&f, MFC_FMT_ENC);
}
-
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index d29e45516eb7..e7e6340b395e 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -431,6 +431,13 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
"Use Previous Specific Frame",
NULL,
};
+ static const char * const vp8_profile[] = {
+ "0",
+ "1",
+ "2",
+ "3",
+ NULL,
+ };
static const char * const flash_led_mode[] = {
"Off",
@@ -614,6 +621,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
return mpeg4_profile;
case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL:
return vpx_golden_frame_sel;
+ case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:
+ return vp8_profile;
case V4L2_CID_JPEG_CHROMA_SUBSAMPLING:
return jpeg_chroma_subsampling;
case V4L2_CID_DV_TX_MODE:
@@ -839,7 +848,7 @@ const char *v4l2_ctrl_get_name(u32 id)
case V4L2_CID_MPEG_VIDEO_VPX_MAX_QP: return "VPX Maximum QP Value";
case V4L2_CID_MPEG_VIDEO_VPX_I_FRAME_QP: return "VPX I-Frame QP Value";
case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP: return "VPX P-Frame QP Value";
- case V4L2_CID_MPEG_VIDEO_VPX_PROFILE: return "VPX Profile";
+ case V4L2_CID_MPEG_VIDEO_VP8_PROFILE: return "VP8 Profile";
/* HEVC controls */
case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP: return "HEVC I-Frame QP Value";
@@ -1180,6 +1189,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
case V4L2_CID_DEINTERLACING_MODE:
case V4L2_CID_TUNE_DEEMPHASIS:
case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL:
+ case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:
case V4L2_CID_DETECT_MD_MODE:
case V4L2_CID_MPEG_VIDEO_HEVC_PROFILE:
case V4L2_CID_MPEG_VIDEO_HEVC_LEVEL:
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index 8d473c979b61..2001823c3072 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -587,7 +587,16 @@ enum v4l2_vp8_golden_frame_sel {
#define V4L2_CID_MPEG_VIDEO_VPX_MAX_QP (V4L2_CID_MPEG_BASE+508)
#define V4L2_CID_MPEG_VIDEO_VPX_I_FRAME_QP (V4L2_CID_MPEG_BASE+509)
#define V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (V4L2_CID_MPEG_BASE+510)
-#define V4L2_CID_MPEG_VIDEO_VPX_PROFILE (V4L2_CID_MPEG_BASE+511)
+
+#define V4L2_CID_MPEG_VIDEO_VP8_PROFILE (V4L2_CID_MPEG_BASE+511)
+enum v4l2_mpeg_video_vp8_profile {
+ V4L2_MPEG_VIDEO_VP8_PROFILE_0 = 0,
+ V4L2_MPEG_VIDEO_VP8_PROFILE_1 = 1,
+ V4L2_MPEG_VIDEO_VP8_PROFILE_2 = 2,
+ V4L2_MPEG_VIDEO_VP8_PROFILE_3 = 3,
+};
+/* Deprecated alias for compatibility reasons. */
+#define V4L2_CID_MPEG_VIDEO_VPX_PROFILE V4L2_CID_MPEG_VIDEO_VP8_PROFILE
/* CIDs for HEVC encoding. */
--
2.18.0.rc1.244.gcf134e6275-goog
^ permalink raw reply related
* [PATCH v4 2/3] media: v4l2-ctrl: Add control for VP9 profile
From: Keiichi Watanabe @ 2018-06-18 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Mauro Carvalho Chehab, Tiffany Lin, Andrew-CT Chen,
Matthias Brugger, Stanimir Varbanov, Kyungmin Park, Kamil Debski,
Jeongtae Park, Andrzej Hajda, Hans Verkuil, Keiichi Watanabe,
Smitha T Murthy, Sylwester Nawrocki, Tom Saeger, Sakari Ailus,
Andy Shevchenko, Tomasz Figa, Ricardo Ribalda Delgado
In-Reply-To: <20180618075854.12881-1-keiichiw@chromium.org>
Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for VP9 profiles. This control
allows selecting the desired profile for VP9 encoder and querying for supported
profiles by VP9 encoder/decoder.
Though this control is similar to V4L2_CID_MPEG_VIDEO_VP8_PROFILE, we need to
separate this control from it because supported profiles usually differ between
VP8 and VP9.
Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org>
---
.../media/uapi/v4l/extended-controls.rst | 23 +++++++++++++++++++
drivers/media/v4l2-core/v4l2-ctrls.c | 11 +++++++++
include/uapi/linux/v4l2-controls.h | 7 ++++++
3 files changed, 41 insertions(+)
diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
index 01ef31a934b4..9f7312bf3365 100644
--- a/Documentation/media/uapi/v4l/extended-controls.rst
+++ b/Documentation/media/uapi/v4l/extended-controls.rst
@@ -1978,6 +1978,29 @@ enum v4l2_mpeg_video_vp8_profile -
* - ``V4L2_MPEG_VIDEO_VP8_PROFILE_3``
- Profile 3
+.. _v4l2-mpeg-video-vp9-profile:
+
+``V4L2_CID_MPEG_VIDEO_VP9_PROFILE``
+ (enum)
+
+enum v4l2_mpeg_video_vp9_profile -
+ This control allows selecting the profile for VP9 encoder.
+ This is also used to enumerate supported profiles by VP9 encoder or decoder.
+ Possible values are:
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_0``
+ - Profile 0
+ * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_1``
+ - Profile 1
+ * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_2``
+ - Profile 2
+ * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3``
+ - Profile 3
+
High Efficiency Video Coding (HEVC/H.265) Control Reference
-----------------------------------------------------------
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index e7e6340b395e..eacfab7574dc 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -438,6 +438,13 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
"3",
NULL,
};
+ static const char * const vp9_profile[] = {
+ "0",
+ "1",
+ "2",
+ "3",
+ NULL,
+ };
static const char * const flash_led_mode[] = {
"Off",
@@ -623,6 +630,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
return vpx_golden_frame_sel;
case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:
return vp8_profile;
+ case V4L2_CID_MPEG_VIDEO_VP9_PROFILE:
+ return vp9_profile;
case V4L2_CID_JPEG_CHROMA_SUBSAMPLING:
return jpeg_chroma_subsampling;
case V4L2_CID_DV_TX_MODE:
@@ -849,6 +858,7 @@ const char *v4l2_ctrl_get_name(u32 id)
case V4L2_CID_MPEG_VIDEO_VPX_I_FRAME_QP: return "VPX I-Frame QP Value";
case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP: return "VPX P-Frame QP Value";
case V4L2_CID_MPEG_VIDEO_VP8_PROFILE: return "VP8 Profile";
+ case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: return "VP9 Profile";
/* HEVC controls */
case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP: return "HEVC I-Frame QP Value";
@@ -1190,6 +1200,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
case V4L2_CID_TUNE_DEEMPHASIS:
case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL:
case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:
+ case V4L2_CID_MPEG_VIDEO_VP9_PROFILE:
case V4L2_CID_DETECT_MD_MODE:
case V4L2_CID_MPEG_VIDEO_HEVC_PROFILE:
case V4L2_CID_MPEG_VIDEO_HEVC_LEVEL:
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index 2001823c3072..f03d3214eec2 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -597,6 +597,13 @@ enum v4l2_mpeg_video_vp8_profile {
};
/* Deprecated alias for compatibility reasons. */
#define V4L2_CID_MPEG_VIDEO_VPX_PROFILE V4L2_CID_MPEG_VIDEO_VP8_PROFILE
+#define V4L2_CID_MPEG_VIDEO_VP9_PROFILE (V4L2_CID_MPEG_BASE+512)
+enum v4l2_mpeg_video_vp9_profile {
+ V4L2_MPEG_VIDEO_VP9_PROFILE_0 = 0,
+ V4L2_MPEG_VIDEO_VP9_PROFILE_1 = 1,
+ V4L2_MPEG_VIDEO_VP9_PROFILE_2 = 2,
+ V4L2_MPEG_VIDEO_VP9_PROFILE_3 = 3,
+};
/* CIDs for HEVC encoding. */
--
2.18.0.rc1.244.gcf134e6275-goog
^ permalink raw reply related
* [PATCH v4 3/3] media: mtk-vcodec: Support VP9 profile in decoder
From: Keiichi Watanabe @ 2018-06-18 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Mauro Carvalho Chehab, Tiffany Lin, Andrew-CT Chen,
Matthias Brugger, Stanimir Varbanov, Kyungmin Park, Kamil Debski,
Jeongtae Park, Andrzej Hajda, Hans Verkuil, Keiichi Watanabe,
Smitha T Murthy, Sylwester Nawrocki, Tom Saeger, Sakari Ailus,
Andy Shevchenko, Tomasz Figa, Ricardo Ribalda Delgado
In-Reply-To: <20180618075854.12881-1-keiichiw@chromium.org>
Add V4L2_CID_MPEG_VIDEO_VP9_PROFILE control in MediaTek decoder's
driver. MediaTek decoder only supports profile 0 for now.
Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org>
---
drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
index 86f0a7134365..ba986232b953 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
@@ -1400,6 +1400,11 @@ int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx)
V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
0, 32, 1, 1);
ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
+ v4l2_ctrl_new_std_menu(&ctx->ctrl_hdl,
+ &mtk_vcodec_dec_ctrl_ops,
+ V4L2_CID_MPEG_VIDEO_VP9_PROFILE,
+ V4L2_MPEG_VIDEO_VP9_PROFILE_0,
+ 0, V4L2_MPEG_VIDEO_VP9_PROFILE_0);
if (ctx->ctrl_hdl.error) {
mtk_v4l2_err("Adding control failed %d",
--
2.18.0.rc1.244.gcf134e6275-goog
^ permalink raw reply related
* [PATCH v6 00/29] Add support for mediatek SOC MT2712
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
This patch add support for the Mediatek MT2712 DISP subsystem.
MT2712 is base on MT8173, there are some difference as following:
MT2712 support three disp output(two ovl and one rdma)
Change in v6:
- Update DDP_COMPONENT_DSI2 to DDP_COMPONENT_DSI3 in the patch
"drm/mediatek: add component DSI3"
- Separate the patch
"drm/mediatek: add DPI1/DSI1/DSI2/DSI3 in comp_init" in v5
to following patch:
drm/mediatek: add component DPI1
drm/mediatek: add component DSI2
drm/mediatek: add component DSI3
drm/mediatek: add the DSI1 for component init condition
- Update the RDMA definition term from "MOUT" to "SOUT"
- Add new patch
"drm/mediatek: Update the definition of connection from RDMA1 to DPI0"
Stu Hsieh (29):
drm/mediatek: update dt-bindings for mt2712
drm/mediatek: support maximum 64 mutex mod
drm/mediatek: add ddp component AAL1
drm/mediatek: add ddp component OD1
drm/mediatek: add ddp component PWM1
drm/mediatek: add ddp component PWM2
drm/mediatek: add component DPI1
drm/mediatek: add component DSI2
drm/mediatek: add component DSI3
drm/mediatek: add the DSI1 for component init condition
drm/mediatek: add connection from OD1 to RDMA1
drm/mediatek: Update the definition of connection from RDMA1 to DPI0
drm/mediatek: add connection from RDMA0 to DPI0
drm/mediatek: add connection from RDMA0 to DSI2
drm/mediatek: add connection from RDMA0 to DSI3
drm/mediatek: add connection from RDMA1 to DPI1
drm/mediatek: add connection from RDMA1 to DSI1
drm/mediatek: add connection from RDMA1 to DSI2
drm/mediatek: add connection from RDMA1 to DSI3
drm/mediatek: add connection from RDMA2 to DPI0
drm/mediatek: add connection from RDMA2 to DPI1
drm/mediatek: add connection from RDMA2 to DSI1
drm/mediatek: add connection from RDMA2 to DSI2
drm/mediatek: add connection from RDMA2 to DSI3
drm/mediatek: add DPI1 support for mutex
drm/mediatek: add DSI2 support for mutex
drm/mediatek: add DSI3 support for mutex
drm/mediatek: add third ddp path
drm/mediatek: Add support for mediatek SOC MT2712
.../bindings/display/mediatek/mediatek,disp.txt | 2 +-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 3 +
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 235 ++++++++++++++++++---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 15 +-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 10 +-
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 47 ++++-
drivers/gpu/drm/mediatek/mtk_drm_drv.h | 5 +-
7 files changed, 274 insertions(+), 43 deletions(-)
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* [PATCH v6 01/29] drm/mediatek: update dt-bindings for mt2712
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
Update device tree binding documentation for the display subsystem for
Mediatek MT2712 SoCs.
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index 383183a89164..8469de510001 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -40,7 +40,7 @@ Required properties (all function blocks):
"mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt
"mediatek,<chip>-disp-mutex" - display mutex
"mediatek,<chip>-disp-od" - overdrive
- the supported chips are mt2701 and mt8173.
+ the supported chips are mt2701, mt2712 and mt8173.
- reg: Physical base address and length of the function block register space
- interrupts: The interrupt signal from the function block (required, except for
merge and split function blocks).
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [PATCH v6 02/29] drm/mediatek: support maximum 64 mutex mod
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch support that if modules more than 32,
add index more than 31 when using DISP_REG_MUTEX_MOD2 bit
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 75 +++++++++++++++++++++-------------
1 file changed, 47 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 8130f3dab661..47ffa240bd25 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -41,31 +41,32 @@
#define DISP_REG_MUTEX_RST(n) (0x28 + 0x20 * (n))
#define DISP_REG_MUTEX_MOD(n) (0x2c + 0x20 * (n))
#define DISP_REG_MUTEX_SOF(n) (0x30 + 0x20 * (n))
+#define DISP_REG_MUTEX_MOD2(n) (0x34 + 0x20 * (n))
#define INT_MUTEX BIT(1)
-#define MT8173_MUTEX_MOD_DISP_OVL0 BIT(11)
-#define MT8173_MUTEX_MOD_DISP_OVL1 BIT(12)
-#define MT8173_MUTEX_MOD_DISP_RDMA0 BIT(13)
-#define MT8173_MUTEX_MOD_DISP_RDMA1 BIT(14)
-#define MT8173_MUTEX_MOD_DISP_RDMA2 BIT(15)
-#define MT8173_MUTEX_MOD_DISP_WDMA0 BIT(16)
-#define MT8173_MUTEX_MOD_DISP_WDMA1 BIT(17)
-#define MT8173_MUTEX_MOD_DISP_COLOR0 BIT(18)
-#define MT8173_MUTEX_MOD_DISP_COLOR1 BIT(19)
-#define MT8173_MUTEX_MOD_DISP_AAL BIT(20)
-#define MT8173_MUTEX_MOD_DISP_GAMMA BIT(21)
-#define MT8173_MUTEX_MOD_DISP_UFOE BIT(22)
-#define MT8173_MUTEX_MOD_DISP_PWM0 BIT(23)
-#define MT8173_MUTEX_MOD_DISP_PWM1 BIT(24)
-#define MT8173_MUTEX_MOD_DISP_OD BIT(25)
-
-#define MT2701_MUTEX_MOD_DISP_OVL BIT(3)
-#define MT2701_MUTEX_MOD_DISP_WDMA BIT(6)
-#define MT2701_MUTEX_MOD_DISP_COLOR BIT(7)
-#define MT2701_MUTEX_MOD_DISP_BLS BIT(9)
-#define MT2701_MUTEX_MOD_DISP_RDMA0 BIT(10)
-#define MT2701_MUTEX_MOD_DISP_RDMA1 BIT(12)
+#define MT8173_MUTEX_MOD_DISP_OVL0 11
+#define MT8173_MUTEX_MOD_DISP_OVL1 12
+#define MT8173_MUTEX_MOD_DISP_RDMA0 13
+#define MT8173_MUTEX_MOD_DISP_RDMA1 14
+#define MT8173_MUTEX_MOD_DISP_RDMA2 15
+#define MT8173_MUTEX_MOD_DISP_WDMA0 16
+#define MT8173_MUTEX_MOD_DISP_WDMA1 17
+#define MT8173_MUTEX_MOD_DISP_COLOR0 18
+#define MT8173_MUTEX_MOD_DISP_COLOR1 19
+#define MT8173_MUTEX_MOD_DISP_AAL 20
+#define MT8173_MUTEX_MOD_DISP_GAMMA 21
+#define MT8173_MUTEX_MOD_DISP_UFOE 22
+#define MT8173_MUTEX_MOD_DISP_PWM0 23
+#define MT8173_MUTEX_MOD_DISP_PWM1 24
+#define MT8173_MUTEX_MOD_DISP_OD 25
+
+#define MT2701_MUTEX_MOD_DISP_OVL 3
+#define MT2701_MUTEX_MOD_DISP_WDMA 6
+#define MT2701_MUTEX_MOD_DISP_COLOR 7
+#define MT2701_MUTEX_MOD_DISP_BLS 9
+#define MT2701_MUTEX_MOD_DISP_RDMA0 10
+#define MT2701_MUTEX_MOD_DISP_RDMA1 12
#define MUTEX_SOF_SINGLE_MODE 0
#define MUTEX_SOF_DSI0 1
@@ -278,6 +279,7 @@ void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex,
struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
mutex[mutex->id]);
unsigned int reg;
+ unsigned int offset;
WARN_ON(&ddp->mutex[mutex->id] != mutex);
@@ -292,9 +294,17 @@ void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex,
reg = MUTEX_SOF_DPI0;
break;
default:
- reg = readl_relaxed(ddp->regs + DISP_REG_MUTEX_MOD(mutex->id));
- reg |= ddp->mutex_mod[id];
- writel_relaxed(reg, ddp->regs + DISP_REG_MUTEX_MOD(mutex->id));
+ if (ddp->mutex_mod[id] < 32) {
+ offset = DISP_REG_MUTEX_MOD(mutex->id);
+ reg = readl_relaxed(ddp->regs + offset);
+ reg |= 1 << ddp->mutex_mod[id];
+ writel_relaxed(reg, ddp->regs + offset);
+ } else {
+ offset = DISP_REG_MUTEX_MOD2(mutex->id);
+ reg = readl_relaxed(ddp->regs + offset);
+ reg |= 1 << (ddp->mutex_mod[id] - 32);
+ writel_relaxed(reg, ddp->regs + offset);
+ }
return;
}
@@ -307,6 +317,7 @@ void mtk_disp_mutex_remove_comp(struct mtk_disp_mutex *mutex,
struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
mutex[mutex->id]);
unsigned int reg;
+ unsigned int offset;
WARN_ON(&ddp->mutex[mutex->id] != mutex);
@@ -318,9 +329,17 @@ void mtk_disp_mutex_remove_comp(struct mtk_disp_mutex *mutex,
ddp->regs + DISP_REG_MUTEX_SOF(mutex->id));
break;
default:
- reg = readl_relaxed(ddp->regs + DISP_REG_MUTEX_MOD(mutex->id));
- reg &= ~(ddp->mutex_mod[id]);
- writel_relaxed(reg, ddp->regs + DISP_REG_MUTEX_MOD(mutex->id));
+ if (ddp->mutex_mod[id] < 32) {
+ offset = DISP_REG_MUTEX_MOD(mutex->id);
+ reg = readl_relaxed(ddp->regs + offset);
+ reg &= ~(1 << ddp->mutex_mod[id]);
+ writel_relaxed(reg, ddp->regs + offset);
+ } else {
+ offset = DISP_REG_MUTEX_MOD2(mutex->id);
+ reg = readl_relaxed(ddp->regs + offset);
+ reg &= ~(1 << (ddp->mutex_mod[id] - 32));
+ writel_relaxed(reg, ddp->regs + offset);
+ }
break;
}
}
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [PATCH v6 03/29] drm/mediatek: add ddp component AAL1
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add component AAL1 and
rename AAL to AAL0
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 2 +-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 3 ++-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 3 ++-
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 +-
4 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 47ffa240bd25..7217665f4b5d 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -110,7 +110,7 @@ static const unsigned int mt2701_mutex_mod[DDP_COMPONENT_ID_MAX] = {
};
static const unsigned int mt8173_mutex_mod[DDP_COMPONENT_ID_MAX] = {
- [DDP_COMPONENT_AAL] = MT8173_MUTEX_MOD_DISP_AAL,
+ [DDP_COMPONENT_AAL0] = MT8173_MUTEX_MOD_DISP_AAL,
[DDP_COMPONENT_COLOR0] = MT8173_MUTEX_MOD_DISP_COLOR0,
[DDP_COMPONENT_COLOR1] = MT8173_MUTEX_MOD_DISP_COLOR1,
[DDP_COMPONENT_GAMMA] = MT8173_MUTEX_MOD_DISP_GAMMA,
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 4672317e3ad1..0919039805aa 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -218,7 +218,8 @@ struct mtk_ddp_comp_match {
};
static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
- [DDP_COMPONENT_AAL] = { MTK_DISP_AAL, 0, &ddp_aal },
+ [DDP_COMPONENT_AAL0] = { MTK_DISP_AAL, 0, &ddp_aal },
+ [DDP_COMPONENT_AAL1] = { MTK_DISP_AAL, 1, &ddp_aal },
[DDP_COMPONENT_BLS] = { MTK_DISP_BLS, 0, NULL },
[DDP_COMPONENT_COLOR0] = { MTK_DISP_COLOR, 0, NULL },
[DDP_COMPONENT_COLOR1] = { MTK_DISP_COLOR, 1, NULL },
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 0828cf8bf85c..eee3c0cc2632 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -41,7 +41,8 @@ enum mtk_ddp_comp_type {
};
enum mtk_ddp_comp_id {
- DDP_COMPONENT_AAL,
+ DDP_COMPONENT_AAL0,
+ DDP_COMPONENT_AAL1,
DDP_COMPONENT_BLS,
DDP_COMPONENT_COLOR0,
DDP_COMPONENT_COLOR1,
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index a2ca90fc403c..a415260f3d5f 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -149,7 +149,7 @@ static const enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = {
static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
DDP_COMPONENT_OVL0,
DDP_COMPONENT_COLOR0,
- DDP_COMPONENT_AAL,
+ DDP_COMPONENT_AAL0,
DDP_COMPONENT_OD,
DDP_COMPONENT_RDMA0,
DDP_COMPONENT_UFOE,
--
2.12.5
^ permalink raw reply related
* [PATCH v6 04/29] drm/mediatek: add ddp component OD1
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add the component OD1 and
rename the OD to OD0
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 4 ++--
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 3 ++-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 3 ++-
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 +-
4 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 7217665f4b5d..58e44349e315 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -114,7 +114,7 @@ static const unsigned int mt8173_mutex_mod[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_COLOR0] = MT8173_MUTEX_MOD_DISP_COLOR0,
[DDP_COMPONENT_COLOR1] = MT8173_MUTEX_MOD_DISP_COLOR1,
[DDP_COMPONENT_GAMMA] = MT8173_MUTEX_MOD_DISP_GAMMA,
- [DDP_COMPONENT_OD] = MT8173_MUTEX_MOD_DISP_OD,
+ [DDP_COMPONENT_OD0] = MT8173_MUTEX_MOD_DISP_OD,
[DDP_COMPONENT_OVL0] = MT8173_MUTEX_MOD_DISP_OVL0,
[DDP_COMPONENT_OVL1] = MT8173_MUTEX_MOD_DISP_OVL1,
[DDP_COMPONENT_PWM0] = MT8173_MUTEX_MOD_DISP_PWM0,
@@ -139,7 +139,7 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
} else if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_RDMA0) {
*addr = DISP_REG_CONFIG_DISP_OVL_MOUT_EN;
value = OVL_MOUT_EN_RDMA;
- } else if (cur == DDP_COMPONENT_OD && next == DDP_COMPONENT_RDMA0) {
+ } else if (cur == DDP_COMPONENT_OD0 && next == DDP_COMPONENT_RDMA0) {
*addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
value = OD_MOUT_EN_RDMA0;
} else if (cur == DDP_COMPONENT_UFOE && next == DDP_COMPONENT_DSI0) {
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 0919039805aa..87acf6be87f6 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -227,7 +227,8 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_DSI0] = { MTK_DSI, 0, NULL },
[DDP_COMPONENT_DSI1] = { MTK_DSI, 1, NULL },
[DDP_COMPONENT_GAMMA] = { MTK_DISP_GAMMA, 0, &ddp_gamma },
- [DDP_COMPONENT_OD] = { MTK_DISP_OD, 0, &ddp_od },
+ [DDP_COMPONENT_OD0] = { MTK_DISP_OD, 0, &ddp_od },
+ [DDP_COMPONENT_OD1] = { MTK_DISP_OD, 1, &ddp_od },
[DDP_COMPONENT_OVL0] = { MTK_DISP_OVL, 0, NULL },
[DDP_COMPONENT_OVL1] = { MTK_DISP_OVL, 1, NULL },
[DDP_COMPONENT_PWM0] = { MTK_DISP_PWM, 0, NULL },
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index eee3c0cc2632..9b19fc4423f1 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -50,7 +50,8 @@ enum mtk_ddp_comp_id {
DDP_COMPONENT_DSI0,
DDP_COMPONENT_DSI1,
DDP_COMPONENT_GAMMA,
- DDP_COMPONENT_OD,
+ DDP_COMPONENT_OD0,
+ DDP_COMPONENT_OD1,
DDP_COMPONENT_OVL0,
DDP_COMPONENT_OVL1,
DDP_COMPONENT_PWM0,
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index a415260f3d5f..08d5d0b47bfe 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -150,7 +150,7 @@ static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
DDP_COMPONENT_OVL0,
DDP_COMPONENT_COLOR0,
DDP_COMPONENT_AAL0,
- DDP_COMPONENT_OD,
+ DDP_COMPONENT_OD0,
DDP_COMPONENT_RDMA0,
DDP_COMPONENT_UFOE,
DDP_COMPONENT_DSI0,
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [PATCH v6 05/29] drm/mediatek: add ddp component PWM1
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add component PWM1 in mtk_ddp_matches
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 87acf6be87f6..a5c7ac2d162d 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -232,6 +232,7 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_OVL0] = { MTK_DISP_OVL, 0, NULL },
[DDP_COMPONENT_OVL1] = { MTK_DISP_OVL, 1, NULL },
[DDP_COMPONENT_PWM0] = { MTK_DISP_PWM, 0, NULL },
+ [DDP_COMPONENT_PWM1] = { MTK_DISP_PWM, 1, NULL },
[DDP_COMPONENT_RDMA0] = { MTK_DISP_RDMA, 0, NULL },
[DDP_COMPONENT_RDMA1] = { MTK_DISP_RDMA, 1, NULL },
[DDP_COMPONENT_RDMA2] = { MTK_DISP_RDMA, 2, NULL },
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [PATCH v6 06/29] drm/mediatek: add ddp component PWM2
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add component PWM2
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 1 +
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index a5c7ac2d162d..86e8c9e5df41 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -233,6 +233,7 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_OVL1] = { MTK_DISP_OVL, 1, NULL },
[DDP_COMPONENT_PWM0] = { MTK_DISP_PWM, 0, NULL },
[DDP_COMPONENT_PWM1] = { MTK_DISP_PWM, 1, NULL },
+ [DDP_COMPONENT_PWM2] = { MTK_DISP_PWM, 2, NULL },
[DDP_COMPONENT_RDMA0] = { MTK_DISP_RDMA, 0, NULL },
[DDP_COMPONENT_RDMA1] = { MTK_DISP_RDMA, 1, NULL },
[DDP_COMPONENT_RDMA2] = { MTK_DISP_RDMA, 2, NULL },
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 9b19fc4423f1..e00c2e798abd 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -56,6 +56,7 @@ enum mtk_ddp_comp_id {
DDP_COMPONENT_OVL1,
DDP_COMPONENT_PWM0,
DDP_COMPONENT_PWM1,
+ DDP_COMPONENT_PWM2,
DDP_COMPONENT_RDMA0,
DDP_COMPONENT_RDMA1,
DDP_COMPONENT_RDMA2,
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [PATCH v6 07/29] drm/mediatek: add component DPI1
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add the component DPI1
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 ++
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 86e8c9e5df41..cc74b1a7278c 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -224,6 +224,7 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_COLOR0] = { MTK_DISP_COLOR, 0, NULL },
[DDP_COMPONENT_COLOR1] = { MTK_DISP_COLOR, 1, NULL },
[DDP_COMPONENT_DPI0] = { MTK_DPI, 0, NULL },
+ [DDP_COMPONENT_DPI1] = { MTK_DPI, 1, NULL },
[DDP_COMPONENT_DSI0] = { MTK_DSI, 0, NULL },
[DDP_COMPONENT_DSI1] = { MTK_DSI, 1, NULL },
[DDP_COMPONENT_GAMMA] = { MTK_DISP_GAMMA, 0, &ddp_gamma },
@@ -275,6 +276,7 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
if (comp_id == DDP_COMPONENT_BLS ||
comp_id == DDP_COMPONENT_DPI0 ||
+ comp_id == DDP_COMPONENT_DPI1 ||
comp_id == DDP_COMPONENT_DSI0 ||
comp_id == DDP_COMPONENT_PWM0) {
comp->regs = NULL;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index e00c2e798abd..54c99c169093 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -47,6 +47,7 @@ enum mtk_ddp_comp_id {
DDP_COMPONENT_COLOR0,
DDP_COMPONENT_COLOR1,
DDP_COMPONENT_DPI0,
+ DDP_COMPONENT_DPI1,
DDP_COMPONENT_DSI0,
DDP_COMPONENT_DSI1,
DDP_COMPONENT_GAMMA,
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [PATCH v6 08/29] drm/mediatek: add component DSI2
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add the component DSI2
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 ++
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index cc74b1a7278c..071f9f5aefea 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -227,6 +227,7 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_DPI1] = { MTK_DPI, 1, NULL },
[DDP_COMPONENT_DSI0] = { MTK_DSI, 0, NULL },
[DDP_COMPONENT_DSI1] = { MTK_DSI, 1, NULL },
+ [DDP_COMPONENT_DSI2] = { MTK_DSI, 2, NULL },
[DDP_COMPONENT_GAMMA] = { MTK_DISP_GAMMA, 0, &ddp_gamma },
[DDP_COMPONENT_OD0] = { MTK_DISP_OD, 0, &ddp_od },
[DDP_COMPONENT_OD1] = { MTK_DISP_OD, 1, &ddp_od },
@@ -278,6 +279,7 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
comp_id == DDP_COMPONENT_DPI0 ||
comp_id == DDP_COMPONENT_DPI1 ||
comp_id == DDP_COMPONENT_DSI0 ||
+ comp_id == DDP_COMPONENT_DSI2 ||
comp_id == DDP_COMPONENT_PWM0) {
comp->regs = NULL;
comp->clk = NULL;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 54c99c169093..8d152b337f15 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -50,6 +50,7 @@ enum mtk_ddp_comp_id {
DDP_COMPONENT_DPI1,
DDP_COMPONENT_DSI0,
DDP_COMPONENT_DSI1,
+ DDP_COMPONENT_DSI2,
DDP_COMPONENT_GAMMA,
DDP_COMPONENT_OD0,
DDP_COMPONENT_OD1,
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [PATCH v6 09/29] drm/mediatek: add component DSI3
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add the component DSI3
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 ++
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 071f9f5aefea..17b681686471 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -228,6 +228,7 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_DSI0] = { MTK_DSI, 0, NULL },
[DDP_COMPONENT_DSI1] = { MTK_DSI, 1, NULL },
[DDP_COMPONENT_DSI2] = { MTK_DSI, 2, NULL },
+ [DDP_COMPONENT_DSI3] = { MTK_DSI, 3, NULL },
[DDP_COMPONENT_GAMMA] = { MTK_DISP_GAMMA, 0, &ddp_gamma },
[DDP_COMPONENT_OD0] = { MTK_DISP_OD, 0, &ddp_od },
[DDP_COMPONENT_OD1] = { MTK_DISP_OD, 1, &ddp_od },
@@ -280,6 +281,7 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
comp_id == DDP_COMPONENT_DPI1 ||
comp_id == DDP_COMPONENT_DSI0 ||
comp_id == DDP_COMPONENT_DSI2 ||
+ comp_id == DDP_COMPONENT_DSI3 ||
comp_id == DDP_COMPONENT_PWM0) {
comp->regs = NULL;
comp->clk = NULL;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 8d152b337f15..7413ffeb3c9d 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -51,6 +51,7 @@ enum mtk_ddp_comp_id {
DDP_COMPONENT_DSI0,
DDP_COMPONENT_DSI1,
DDP_COMPONENT_DSI2,
+ DDP_COMPONENT_DSI3,
DDP_COMPONENT_GAMMA,
DDP_COMPONENT_OD0,
DDP_COMPONENT_OD1,
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [PATCH v6 10/29] drm/mediatek: add the DSI1 for component init condition
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add the DSI1 for component init condition
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 17b681686471..ff974d82a4a6 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -280,6 +280,7 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
comp_id == DDP_COMPONENT_DPI0 ||
comp_id == DDP_COMPONENT_DPI1 ||
comp_id == DDP_COMPONENT_DSI0 ||
+ comp_id == DDP_COMPONENT_DSI1 ||
comp_id == DDP_COMPONENT_DSI2 ||
comp_id == DDP_COMPONENT_DSI3 ||
comp_id == DDP_COMPONENT_PWM0) {
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [PATCH v6 11/29] drm/mediatek: add connection from OD1 to RDMA1
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add the connection from OD1 to RDMA1 for ext path.
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 58e44349e315..8bfc0debd2c2 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -75,6 +75,7 @@
#define OVL0_MOUT_EN_COLOR0 0x1
#define OD_MOUT_EN_RDMA0 0x1
+#define OD1_MOUT_EN_RDMA1 BIT(16)
#define UFOE_MOUT_EN_DSI0 0x1
#define COLOR0_SEL_IN_OVL0 0x1
#define OVL1_MOUT_EN_COLOR1 0x1
@@ -151,6 +152,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
} else if (cur == DDP_COMPONENT_GAMMA && next == DDP_COMPONENT_RDMA1) {
*addr = DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN;
value = GAMMA_MOUT_EN_RDMA1;
+ } else if (cur == DDP_COMPONENT_OD1 && next == DDP_COMPONENT_RDMA1) {
+ *addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
+ value = OD1_MOUT_EN_RDMA1;
} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
*addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
value = RDMA1_MOUT_DPI0;
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [PATCH v6 12/29] drm/mediatek: Update the definition of connection from RDMA1 to DPI0
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: David Airlie, Rob Herring, Mark Rutland, Matthias Brugger,
dri-devel, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, srv_heupstream, Stu Hsieh
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch update the definition of connection from RDMA1 to DPI0.
Change the term MOUT to SOUT.
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 8bfc0debd2c2..977df8facb79 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -29,7 +29,7 @@
#define DISP_REG_CONFIG_DISP_COLOR0_SEL_IN 0x084
#define DISP_REG_CONFIG_DISP_COLOR1_SEL_IN 0x088
#define DISP_REG_CONFIG_DPI_SEL_IN 0x0ac
-#define DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN 0x0c8
+#define DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN 0x0c8
#define DISP_REG_CONFIG_MMSYS_CG_CON0 0x100
#define DISP_REG_CONFIG_DISP_OVL_MOUT_EN 0x030
@@ -80,7 +80,7 @@
#define COLOR0_SEL_IN_OVL0 0x1
#define OVL1_MOUT_EN_COLOR1 0x1
#define GAMMA_MOUT_EN_RDMA1 0x1
-#define RDMA1_MOUT_DPI0 0x2
+#define RDMA1_SOUT_DPI0 0x2
#define DPI0_SEL_IN_RDMA1 0x1
#define COLOR1_SEL_IN_OVL1 0x1
@@ -156,8 +156,8 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
*addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
value = OD1_MOUT_EN_RDMA1;
} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
- *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
- value = RDMA1_MOUT_DPI0;
+ *addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
+ value = RDMA1_SOUT_DPI0;
} else {
value = 0;
}
--
2.12.5
^ permalink raw reply related
* [PATCH v6 13/29] drm/mediatek: add connection from RDMA0 to DPI0
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add the connection from RDMA0 to DPI0
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 977df8facb79..3a3f37f523f2 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -29,6 +29,7 @@
#define DISP_REG_CONFIG_DISP_COLOR0_SEL_IN 0x084
#define DISP_REG_CONFIG_DISP_COLOR1_SEL_IN 0x088
#define DISP_REG_CONFIG_DPI_SEL_IN 0x0ac
+#define DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN 0x0c4
#define DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN 0x0c8
#define DISP_REG_CONFIG_MMSYS_CG_CON0 0x100
@@ -80,6 +81,7 @@
#define COLOR0_SEL_IN_OVL0 0x1
#define OVL1_MOUT_EN_COLOR1 0x1
#define GAMMA_MOUT_EN_RDMA1 0x1
+#define RDMA0_SOUT_DPI0 0x2
#define RDMA1_SOUT_DPI0 0x2
#define DPI0_SEL_IN_RDMA1 0x1
#define COLOR1_SEL_IN_OVL1 0x1
@@ -155,6 +157,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
} else if (cur == DDP_COMPONENT_OD1 && next == DDP_COMPONENT_RDMA1) {
*addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
value = OD1_MOUT_EN_RDMA1;
+ } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DPI0) {
+ *addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
+ value = RDMA0_SOUT_DPI0;
} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
value = RDMA1_SOUT_DPI0;
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [PATCH v6 14/29] drm/mediatek: add connection from RDMA0 to DSI2
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add the connection from RDMA0 to DSI2
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 3a3f37f523f2..f985bad61d83 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -82,6 +82,7 @@
#define OVL1_MOUT_EN_COLOR1 0x1
#define GAMMA_MOUT_EN_RDMA1 0x1
#define RDMA0_SOUT_DPI0 0x2
+#define RDMA0_SOUT_DSI2 0x4
#define RDMA1_SOUT_DPI0 0x2
#define DPI0_SEL_IN_RDMA1 0x1
#define COLOR1_SEL_IN_OVL1 0x1
@@ -160,6 +161,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DPI0) {
*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
value = RDMA0_SOUT_DPI0;
+ } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI2) {
+ *addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
+ value = RDMA0_SOUT_DSI2;
} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
value = RDMA1_SOUT_DPI0;
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [PATCH v6 15/29] drm/mediatek: add connection from RDMA0 to DSI3
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: David Airlie, Rob Herring, Mark Rutland, Matthias Brugger,
dri-devel, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, srv_heupstream, Stu Hsieh
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add the connection from RDMA0 to DSI3
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index f985bad61d83..463ed7830d17 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -83,6 +83,7 @@
#define GAMMA_MOUT_EN_RDMA1 0x1
#define RDMA0_SOUT_DPI0 0x2
#define RDMA0_SOUT_DSI2 0x4
+#define RDMA0_SOUT_DSI3 0x5
#define RDMA1_SOUT_DPI0 0x2
#define DPI0_SEL_IN_RDMA1 0x1
#define COLOR1_SEL_IN_OVL1 0x1
@@ -164,6 +165,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI2) {
*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
value = RDMA0_SOUT_DSI2;
+ } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI3) {
+ *addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
+ value = RDMA0_SOUT_DSI3;
} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
value = RDMA1_SOUT_DPI0;
--
2.12.5
^ permalink raw reply related
* [PATCH v6 16/29] drm/mediatek: add connection from RDMA1 to DPI1
From: Stu Hsieh @ 2018-06-19 7:34 UTC (permalink / raw)
To: CK Hu, Philipp Zabel
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
linux-kernel, dri-devel, Rob Herring, linux-mediatek, Stu Hsieh,
Matthias Brugger, linux-arm-kernel
In-Reply-To: <1529393670-26862-1-git-send-email-stu.hsieh@mediatek.com>
This patch add the connection from RDMA1 to DPI1
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 463ed7830d17..13e91903f493 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -85,7 +85,9 @@
#define RDMA0_SOUT_DSI2 0x4
#define RDMA0_SOUT_DSI3 0x5
#define RDMA1_SOUT_DPI0 0x2
+#define RDMA1_SOUT_DPI1 0x3
#define DPI0_SEL_IN_RDMA1 0x1
+#define DPI1_SEL_IN_RDMA1 (0x1 << 8)
#define COLOR1_SEL_IN_OVL1 0x1
#define OVL_MOUT_EN_RDMA 0x1
@@ -171,6 +173,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
value = RDMA1_SOUT_DPI0;
+ } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
+ *addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
+ value = RDMA1_SOUT_DPI1;
} else {
value = 0;
}
@@ -190,6 +195,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
*addr = DISP_REG_CONFIG_DPI_SEL_IN;
value = DPI0_SEL_IN_RDMA1;
+ } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
+ *addr = DISP_REG_CONFIG_DPI_SEL_IN;
+ value = DPI1_SEL_IN_RDMA1;
} else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
*addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
value = COLOR1_SEL_IN_OVL1;
--
2.12.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox