Re: [PATCH 0/8] ipq5018: enable ethernet support

[Ziyang Huang <hzyitc@outlook.com>]

在 2024/1/21 23:51, Andrew Lunn 写道:
> On Sun, Jan 21, 2024 at 08:40:39PM +0800, Ziyang Huang wrote:
>> Enable ethernet support for IPQ5018.
>>
>> Praveenkumar I (1):
>>    clk: qcom: support for duplicate freq in RCG2 freq table
>>
>> Ziyang Huang (7):
>>    net: phy: Introduce Qualcomm IPQ5018 internal PHY driver
>>    phy: Introduce Qualcomm ethernet uniphy driver
>>    net: stmmac: Introduce Qualcomm IPQ50xx DWMAC driver
>>    clk: qcom: gcc-ipq5018: correct gcc_gmac0_sys_clk reg
>>    net: mdio: ipq4019: support reset control
>>    arm64: dts: qcom: ipq5018: enable ethernet support
>>    arm64: dts: qcom: ipq5018-rdp432-c2: enable ethernet support
> 
> Hi Ziyang
> 
> You failed to Cc: a number of Maintainers here. e.g for the PHY and
> MDIO patches i would of expected the PHY and maintainers to be Cc:ed.
> 
>       Andrew

Hi Andrew,

Sorrr for my mistake. For easily comparison, I added these patches to 
git index, which mess up ./scripts/checkpatch.pl and 
./scripts/get_maintainer.pl and led to wrong results. Will add correct 
Cc: in next patches.