Linux-mediatek Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Quan Zhou <quan.zhou@mediatek.com>
Cc: Felix Fietkau <nbd@nbd.name>, Sean Wang <sean.wang@mediatek.com>,
	Deren Wu <Deren.Wu@mediatek.com>,
	Ryder Lee <ryder.lee@mediatek.com>,
	Shayne Chen <shayne.chen@mediatek.com>,
	linux-wireless <linux-wireless@vger.kernel.org>,
	linux-mediatek <linux-mediatek@lists.infradead.org>,
	Shengxi Xu <shengxi.xu@mediatek.com>,
	Hao Zhang <hao.zhang@mediatek.com>
Subject: Re: [PATCH] wifi: mt76: mt7921e: add LED control support
Date: Wed, 10 Apr 2024 12:33:39 +0200	[thread overview]
Message-ID: <ZhZrAyc84-VCdrdw@lore-desk> (raw)
In-Reply-To: <b376f88ab9fd69a5e4ba4bbd2c9fff3ef53b8968.1712735769.git.quan.zhou@mediatek.com>

[-- Attachment #1: Type: text/plain, Size: 3874 bytes --]

[...]

> +static void mt7921_stop(struct ieee80211_hw *hw)
> +{
> +	struct mt792x_dev *dev = mt792x_hw_dev(hw);
> +	int err = 0;
> +
> +	mt792x_mutex_acquire(dev);
> +	if (mt76_is_mmio(&dev->mt76))
> +		err = mt7921_mcu_radio_led_ctrl(dev, EXT_CMD_RADIO_OFF_LED);
> +	mt792x_mutex_release(dev);

you can avoid waking the device up here if it is not a pci one, right?

Regards,
Lorenzo

> +	if (err)
> +		return;
> +
> +	mt792x_stop(hw);
> +}
> +
>  static int
>  mt7921_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
>  {
> @@ -1372,7 +1396,7 @@ static void mt7921_mgd_complete_tx(struct ieee80211_hw *hw,
>  const struct ieee80211_ops mt7921_ops = {
>  	.tx = mt792x_tx,
>  	.start = mt7921_start,
> -	.stop = mt792x_stop,
> +	.stop = mt7921_stop,
>  	.add_interface = mt7921_add_interface,
>  	.remove_interface = mt792x_remove_interface,
>  	.config = mt7921_config,
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> index 8b4ce32a2cd1..2ebf0ffe78d5 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> @@ -606,6 +606,20 @@ int mt7921_run_firmware(struct mt792x_dev *dev)
>  }
>  EXPORT_SYMBOL_GPL(mt7921_run_firmware);
>  
> +int mt7921_mcu_radio_led_ctrl(struct mt792x_dev *dev, u8 value)
> +{
> +	struct {
> +		u8 ctrlid;
> +		u8 rsv[3];
> +	} __packed req = {
> +		.ctrlid = value,
> +	};
> +
> +	return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(ID_RADIO_ON_OFF_CTRL),
> +				&req, sizeof(req), false);
> +}
> +EXPORT_SYMBOL_GPL(mt7921_mcu_radio_led_ctrl);
> +
>  int mt7921_mcu_set_tx(struct mt792x_dev *dev, struct ieee80211_vif *vif)
>  {
>  	struct mt792x_vif *mvif = (struct mt792x_vif *)vif->drv_priv;
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> index 3016636d18c6..07023eb9e5b5 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> @@ -27,6 +27,10 @@
>  #define MCU_UNI_EVENT_ROC  0x27
>  #define MCU_UNI_EVENT_CLC  0x80
>  
> +#define EXT_CMD_RADIO_LED_CTRL_ENABLE   0x1
> +#define EXT_CMD_RADIO_ON_LED            0x2
> +#define EXT_CMD_RADIO_OFF_LED           0x3
> +
>  enum {
>  	UNI_ROC_ACQUIRE,
>  	UNI_ROC_ABORT,
> @@ -196,6 +200,7 @@ int mt7921_mcu_fw_log_2_host(struct mt792x_dev *dev, u8 ctrl);
>  void mt7921_mcu_rx_event(struct mt792x_dev *dev, struct sk_buff *skb);
>  int mt7921_mcu_set_rxfilter(struct mt792x_dev *dev, u32 fif,
>  			    u8 bit_op, u32 bit_map);
> +int mt7921_mcu_radio_led_ctrl(struct mt792x_dev *dev, u8 value);
>  
>  static inline u32
>  mt7921_reg_map_l1(struct mt792x_dev *dev, u32 addr)
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
> index 0b69b225bc16..f768e9389ac6 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
> @@ -427,6 +427,10 @@ static int mt7921_pci_suspend(struct device *device)
>  	wait_event_timeout(dev->wait,
>  			   !dev->regd_in_progress, 5 * HZ);
>  
> +	err = mt7921_mcu_radio_led_ctrl(dev, EXT_CMD_RADIO_OFF_LED);
> +	if (err < 0)
> +		goto restore_suspend;
> +
>  	err = mt76_connac_mcu_set_hif_suspend(mdev, true);
>  	if (err)
>  		goto restore_suspend;
> @@ -525,9 +529,11 @@ static int mt7921_pci_resume(struct device *device)
>  		mt76_connac_mcu_set_deep_sleep(&dev->mt76, false);
>  
>  	err = mt76_connac_mcu_set_hif_suspend(mdev, false);
> +	if (err < 0)
> +		goto failed;
>  
>  	mt7921_regd_update(dev);
> -
> +	err = mt7921_mcu_radio_led_ctrl(dev, EXT_CMD_RADIO_ON_LED);
>  failed:
>  	pm->suspended = false;
>  
> -- 
> 2.18.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2024-04-10 10:33 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-10  8:58 [PATCH] wifi: mt76: mt7921e: add LED control support Quan Zhou
2024-04-10 10:33 ` Lorenzo Bianconi [this message]
2024-04-10 12:20   ` Quan Zhou (周全)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZhZrAyc84-VCdrdw@lore-desk \
    --to=lorenzo@kernel.org \
    --cc=Deren.Wu@mediatek.com \
    --cc=hao.zhang@mediatek.com \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=nbd@nbd.name \
    --cc=quan.zhou@mediatek.com \
    --cc=ryder.lee@mediatek.com \
    --cc=sean.wang@mediatek.com \
    --cc=shayne.chen@mediatek.com \
    --cc=shengxi.xu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox