> This small series includes two short and simple patches to improve RX performance
> on this driver.

Hi Elad,

What is the chip revision you are running?
If you are using a device that does not support HW-LRO (e.g. MT7986 or
MT7988), I guess we can try to use page_pool_dev_alloc_frag() APIs and
request a 2048B buffer. Doing so, we can use use a single page for two
rx buffers improving recycling with page_pool. What do you think?

Regards,
Lorenzo

> 
> iperf3 result without these patches:
> 	[ ID] Interval           Transfer     Bandwidth
> 	[  4]   0.00-1.00   sec   563 MBytes  4.72 Gbits/sec
> 	[  4]   1.00-2.00   sec   563 MBytes  4.73 Gbits/sec
> 	[  4]   2.00-3.00   sec   552 MBytes  4.63 Gbits/sec
> 	[  4]   3.00-4.00   sec   561 MBytes  4.70 Gbits/sec
> 	[  4]   4.00-5.00   sec   562 MBytes  4.71 Gbits/sec
> 	[  4]   5.00-6.00   sec   565 MBytes  4.74 Gbits/sec
> 	[  4]   6.00-7.00   sec   563 MBytes  4.72 Gbits/sec
> 	[  4]   7.00-8.00   sec   565 MBytes  4.74 Gbits/sec
> 	[  4]   8.00-9.00   sec   562 MBytes  4.71 Gbits/sec
> 	[  4]   9.00-10.00  sec   558 MBytes  4.68 Gbits/sec
> 	- - - - - - - - - - - - - - - - - - - - - - - - -
> 	[ ID] Interval           Transfer     Bandwidth
> 	[  4]   0.00-10.00  sec  5.48 GBytes  4.71 Gbits/sec                  sender
> 	[  4]   0.00-10.00  sec  5.48 GBytes  4.71 Gbits/sec                  receiver
> 
> iperf3 result with "use prefetch methods" patch:
> 	[ ID] Interval           Transfer     Bandwidth
> 	[  4]   0.00-1.00   sec   598 MBytes  5.02 Gbits/sec
> 	[  4]   1.00-2.00   sec   588 MBytes  4.94 Gbits/sec
> 	[  4]   2.00-3.00   sec   592 MBytes  4.97 Gbits/sec
> 	[  4]   3.00-4.00   sec   594 MBytes  4.98 Gbits/sec
> 	[  4]   4.00-5.00   sec   590 MBytes  4.95 Gbits/sec
> 	[  4]   5.00-6.00   sec   594 MBytes  4.98 Gbits/sec
> 	[  4]   6.00-7.00   sec   594 MBytes  4.98 Gbits/sec
> 	[  4]   7.00-8.00   sec   593 MBytes  4.98 Gbits/sec
> 	[  4]   8.00-9.00   sec   593 MBytes  4.98 Gbits/sec
> 	[  4]   9.00-10.00  sec   594 MBytes  4.98 Gbits/sec
> 	- - - - - - - - - - - - - - - - - - - - - - - - -
> 	[ ID] Interval           Transfer     Bandwidth
> 	[  4]   0.00-10.00  sec  5.79 GBytes  4.98 Gbits/sec                  sender
> 	[  4]   0.00-10.00  sec  5.79 GBytes  4.98 Gbits/sec                  receiver
> 
> iperf3 result with "use PP exclusively for XDP programs" patch:
> 	[ ID] Interval           Transfer     Bandwidth
> 	[  4]   0.00-1.00   sec   635 MBytes  5.33 Gbits/sec
> 	[  4]   1.00-2.00   sec   636 MBytes  5.33 Gbits/sec
> 	[  4]   2.00-3.00   sec   637 MBytes  5.34 Gbits/sec
> 	[  4]   3.00-4.00   sec   636 MBytes  5.34 Gbits/sec
> 	[  4]   4.00-5.00   sec   637 MBytes  5.34 Gbits/sec
> 	[  4]   5.00-6.00   sec   637 MBytes  5.35 Gbits/sec
> 	[  4]   6.00-7.00   sec   637 MBytes  5.34 Gbits/sec
> 	[  4]   7.00-8.00   sec   636 MBytes  5.33 Gbits/sec
> 	[  4]   8.00-9.00   sec   634 MBytes  5.32 Gbits/sec
> 	[  4]   9.00-10.00  sec   637 MBytes  5.34 Gbits/sec
> 	- - - - - - - - - - - - - - - - - - - - - - - - -
> 	[ ID] Interval           Transfer     Bandwidth
> 	[  4]   0.00-10.00  sec  6.21 GBytes  5.34 Gbits/sec                  sender
> 	[  4]   0.00-10.00  sec  6.21 GBytes  5.34 Gbits/sec                  receiver
> 
> iperf3 result with both patches:
> 	[ ID] Interval           Transfer     Bandwidth
> 	[  4]   0.00-1.00   sec   652 MBytes  5.47 Gbits/sec
> 	[  4]   1.00-2.00   sec   653 MBytes  5.47 Gbits/sec
> 	[  4]   2.00-3.00   sec   654 MBytes  5.48 Gbits/sec
> 	[  4]   3.00-4.00   sec   654 MBytes  5.49 Gbits/sec
> 	[  4]   4.00-5.00   sec   653 MBytes  5.48 Gbits/sec
> 	[  4]   5.00-6.00   sec   653 MBytes  5.48 Gbits/sec
> 	[  4]   6.00-7.00   sec   653 MBytes  5.48 Gbits/sec
> 	[  4]   7.00-8.00   sec   653 MBytes  5.48 Gbits/sec
> 	[  4]   8.00-9.00   sec   653 MBytes  5.48 Gbits/sec
> 	[  4]   9.00-10.00  sec   654 MBytes  5.48 Gbits/sec
> 	- - - - - - - - - - - - - - - - - - - - - - - - -
> 	[ ID] Interval           Transfer     Bandwidth
> 	[  4]   0.00-10.00  sec  6.38 GBytes  5.48 Gbits/sec                  sender
> 	[  4]   0.00-10.00  sec  6.38 GBytes  5.48 Gbits/sec                  receiver
> 
> About 16% more packets/sec without XDP program loaded,
> and about 5% more packets/sec when using PP.
> Tested on Banana Pi BPI-R4 (MT7988A)
> 
> ---
> Technically, this is version 2 of the “use prefetch methods” patch.
> Initially, I submitted it as a single patch for review (RFC),
> but later I decided to include a second patch, resulting in this series
> Changes in v2:
> 	- Add "use PP exclusively for XDP programs" patch and create this series
> ---
> Elad Yifee (2):
>   net: ethernet: mtk_eth_soc: use prefetch methods
>   net: ethernet: mtk_eth_soc: use PP exclusively for XDP programs
> 
>  drivers/net/ethernet/mediatek/mtk_eth_soc.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> -- 
> 2.45.2
>