From: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
To: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Cc: daniel.lezcano@linaro.org, tglx@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, matthias.bgg@gmail.com,
angelogioacchino.delregno@collabora.com,
linux-kernel@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, chun-hung.wu@mediatek.com,
walter.chang@mediatek.com, jstultz@google.com,
amergnat@baylibre.com, aisheng.dong@nxp.com, jindong.yue@nxp.com,
xuegang.liu@nxp.com
Subject: Re: [PATCH v4 3/4] clocksource/drivers/timer-mediatek: Convert timer-mediatek to a loadable module
Date: Wed, 4 Mar 2026 20:02:34 +0100 [thread overview]
Message-ID: <aaiByowtXrTxPsd7@mai.linaro.org> (raw)
In-Reply-To: <20260304081207.4030882-4-zhipeng.wang_1@nxp.com>
On Wed, Mar 04, 2026 at 05:12:06PM +0900, Zhipeng Wang wrote:
> From: Chun-Hung Wu <chun-hung.wu@mediatek.com>
>
> Convert the timer-mediatek driver into a loadable module so that it
> can register an always-on timer as the tick_broadcast_device on
> MediaTek SoCs. This helps support GKI(Generic Kernel Image) modular
> configurations.
>
> Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
> Signed-off-by: Walter Chang <walter.chang@mediatek.com>
> Tested-by: Walter Chang <walter.chang@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
> Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
> ---
> drivers/clocksource/Kconfig | 2 +-
> drivers/clocksource/timer-mediatek.c | 33 ++++++++++++++++++++++++++++
> 2 files changed, 34 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index fd9112706545..2112efb85029 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -488,7 +488,7 @@ config SYS_SUPPORTS_SH_CMT
> bool
>
> config MTK_TIMER
> - bool "Mediatek timer driver" if COMPILE_TEST
> + tristate "MediaTek timer driver"
> depends on HAS_IOMEM
> select TIMER_OF
> select CLKSRC_MMIO
> diff --git a/drivers/clocksource/timer-mediatek.c b/drivers/clocksource/timer-mediatek.c
> index 7bcb4a3f26fb..4ad4bac6f34b 100644
> --- a/drivers/clocksource/timer-mediatek.c
> +++ b/drivers/clocksource/timer-mediatek.c
> @@ -13,6 +13,9 @@
> #include <linux/clocksource.h>
> #include <linux/interrupt.h>
> #include <linux/irqreturn.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> #include <linux/sched_clock.h>
> #include <linux/slab.h>
> #include "timer-of.h"
> @@ -337,5 +340,35 @@ static int __init mtk_gpt_init(struct device_node *node)
>
> return 0;
> }
> +
> +#ifndef MODULE
> TIMER_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_gpt_init);
> TIMER_OF_DECLARE(mtk_mt6765, "mediatek,mt6765-timer", mtk_syst_init);
> +#else
> +static int mtk_timer_probe(struct platform_device *pdev)
> +{
> + int (*timer_init)(struct device_node *node);
> + struct device_node *np = pdev->dev.of_node;
> +
> + timer_init = of_device_get_match_data(&pdev->dev);
> + return timer_init(np);
> +}
> +
> +static const struct of_device_id mtk_timer_match_table[] = {
> + { .compatible = "mediatek,mt6577-timer", .data = mtk_gpt_init },
> + { .compatible = "mediatek,mt6765-timer", .data = mtk_syst_init },
> + { /* sentinel */ }
> +};
> +
> +static struct platform_driver mtk_timer_driver = {
> + .probe = mtk_timer_probe,
> + .driver = {
> + .name = "mediatek-timer",
> + .of_match_table = mtk_timer_match_table,
> + },
> +};
> +module_platform_driver(mtk_timer_driver);
> +
> +MODULE_DESCRIPTION("MediaTek Timer driver");
> +MODULE_LICENSE("GPL");
> +#endif
What do you think about the approach found here:
https://lore.kernel.org/all/20250625085715.889837-1-daniel.lezcano@linaro.org/
> --
> 2.34.1
>
--
next prev parent reply other threads:[~2026-03-04 19:02 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-04 8:12 [PATCH v4 0/4] clocksource: Add module support for timer drivers Zhipeng Wang
2026-03-04 8:12 ` [PATCH v4 1/4] clocksource/drivers/mmio: Export clocksource_mmio_init() Zhipeng Wang
2026-03-04 8:12 ` [PATCH v4 2/4] clocksource/drivers/timer-of: Remove __init markings Zhipeng Wang
2026-03-04 8:12 ` [PATCH v4 3/4] clocksource/drivers/timer-mediatek: Convert timer-mediatek to a loadable module Zhipeng Wang
2026-03-04 19:02 ` Daniel Lezcano [this message]
2026-03-06 5:46 ` [EXT] " Zhipeng Wang
2026-03-08 19:51 ` Daniel Lezcano
2026-03-09 5:31 ` Zhipeng Wang
2026-03-09 6:14 ` Trilok Soni
2026-03-09 9:38 ` Daniel Lezcano
2026-03-10 8:41 ` Zhipeng Wang
2026-03-25 14:42 ` Daniel Lezcano
2026-03-26 10:34 ` Zhipeng Wang
2026-03-04 8:12 ` [PATCH v4 4/4] clocksource/drivers/imx-tpm: Support building imx-tpm driver as module Zhipeng Wang
2026-03-05 13:44 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aaiByowtXrTxPsd7@mai.linaro.org \
--to=daniel.lezcano@oss.qualcomm.com \
--cc=aisheng.dong@nxp.com \
--cc=amergnat@baylibre.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=chun-hung.wu@mediatek.com \
--cc=daniel.lezcano@linaro.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=jindong.yue@nxp.com \
--cc=jstultz@google.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tglx@kernel.org \
--cc=walter.chang@mediatek.com \
--cc=xuegang.liu@nxp.com \
--cc=zhipeng.wang_1@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox