Linux-mediatek Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Pan Chuang <panchuang@vivo.com>
Cc: Bjorn Andersson <andersson@kernel.org>,
	Paul Cercueil <paul@crapouillou.net>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	"open list:REMOTE PROCESSOR (REMOTEPROC) SUBSYSTEM"
	<linux-remoteproc@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>,
	"open list:INGENIC JZ47xx SoCs" <linux-mips@vger.kernel.org>,
	"moderated list:ARM/Mediatek SoC support"
	<linux-arm-kernel@lists.infradead.org>,
	"moderated list:ARM/Mediatek SoC support"
	<linux-mediatek@lists.infradead.org>,
	"open list:ARM/QUALCOMM MAILING LIST"
	<linux-arm-msm@vger.kernel.org>,
	"moderated list:ARM/STM32 ARCHITECTURE"
	<linux-stm32@st-md-mailman.stormreply.com>
Subject: Re: [PATCH] remoteproc: Remove redundant dev_err()/dev_err_probe()
Date: Mon, 20 Jul 2026 11:33:56 -0600	[thread overview]
Message-ID: <al5cBMO91BeFghCz@p14s> (raw)
In-Reply-To: <20260717065224.600593-1-panchuang@vivo.com>

On Fri, Jul 17, 2026 at 02:52:23PM +0800, Pan Chuang wrote:
> Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
> devm_request_*_irq()"), devm_request_irq() and devm_request_threaded_irq()
> automatically log detailed error messages on failure. Remove the
> now-redundant driver-specific dev_err() and dev_err_probe() calls.
> 
> Signed-off-by: Pan Chuang <panchuang@vivo.com>
> ---
>  drivers/remoteproc/da8xx_remoteproc.c    |  2 +-
>  drivers/remoteproc/ingenic_rproc.c       |  4 +---
>  drivers/remoteproc/keystone_remoteproc.c |  4 ++--
>  drivers/remoteproc/mtk_scp.c             |  4 +---
>  drivers/remoteproc/qcom_q6v5.c           | 20 +++++---------------
>  drivers/remoteproc/qcom_sysmon.c         |  2 --
>  drivers/remoteproc/qcom_wcnss.c          |  4 +---
>  drivers/remoteproc/stm32_rproc.c         |  3 +--
>  8 files changed, 12 insertions(+), 31 deletions(-)
>

Applied.

Thanks,
Mathieu
 
> diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
> index 23fca7176539..006fa7b56727 100644
> --- a/drivers/remoteproc/da8xx_remoteproc.c
> +++ b/drivers/remoteproc/da8xx_remoteproc.c
> @@ -298,7 +298,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
>  					handle_event, 0, "da8xx-remoteproc",
>  					rproc);
>  	if (ret)
> -		return dev_err_probe(dev, ret, "devm_request_threaded_irq error\n");
> +		return ret;
>  
>  	/*
>  	 * rproc_add() can end up enabling the DSP's clk with the DSP
> diff --git a/drivers/remoteproc/ingenic_rproc.c b/drivers/remoteproc/ingenic_rproc.c
> index 1b78d8ddeacf..252519f48964 100644
> --- a/drivers/remoteproc/ingenic_rproc.c
> +++ b/drivers/remoteproc/ingenic_rproc.c
> @@ -219,10 +219,8 @@ static int ingenic_rproc_probe(struct platform_device *pdev)
>  
>  	ret = devm_request_irq(dev, vpu->irq, vpu_interrupt, IRQF_NO_AUTOEN,
>  			       "VPU", rproc);
> -	if (ret < 0) {
> -		dev_err(dev, "Failed to request IRQ\n");
> +	if (ret < 0)
>  		return ret;
> -	}
>  
>  	ret = devm_rproc_add(dev, rproc);
>  	if (ret) {
> diff --git a/drivers/remoteproc/keystone_remoteproc.c b/drivers/remoteproc/keystone_remoteproc.c
> index 83763d640c4e..407d6034f748 100644
> --- a/drivers/remoteproc/keystone_remoteproc.c
> +++ b/drivers/remoteproc/keystone_remoteproc.c
> @@ -411,7 +411,7 @@ static int keystone_rproc_probe(struct platform_device *pdev)
>  	ret = devm_request_irq(dev, ksproc->irq_ring, keystone_rproc_vring_interrupt,
>  			       IRQF_NO_AUTOEN, dev_name(dev), ksproc);
>  	if (ret)
> -		return dev_err_probe(dev, ret, "failed to request vring interrupt\n");
> +		return ret;
>  
>  	ksproc->irq_fault = platform_get_irq_byname(pdev, "exception");
>  	if (ksproc->irq_fault < 0)
> @@ -419,7 +419,7 @@ static int keystone_rproc_probe(struct platform_device *pdev)
>  	ret = devm_request_irq(dev, ksproc->irq_fault, keystone_rproc_exception_interrupt,
>  			       IRQF_NO_AUTOEN, dev_name(dev), ksproc);
>  	if (ret)
> -		return dev_err_probe(dev, ret, "failed to enable exception interrupt\n");
> +		return ret;
>  
>  	ksproc->kick_gpio = devm_gpiod_get(dev, "kick", GPIOD_ASIS);
>  	ret = PTR_ERR_OR_ZERO(ksproc->kick_gpio);
> diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
> index 436656bdfa8b..9751acc2bf83 100644
> --- a/drivers/remoteproc/mtk_scp.c
> +++ b/drivers/remoteproc/mtk_scp.c
> @@ -1246,10 +1246,8 @@ static struct mtk_scp *scp_rproc_init(struct platform_device *pdev,
>  					scp_irq_handler, IRQF_ONESHOT,
>  					pdev->name, scp);
>  
> -	if (ret) {
> -		dev_err(dev, "failed to request irq\n");
> +	if (ret)
>  		goto remove_subdev;
> -	}
>  
>  	return scp;
>  
> diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
> index 0206a4a19254..1075ef4027b7 100644
> --- a/drivers/remoteproc/qcom_q6v5.c
> +++ b/drivers/remoteproc/qcom_q6v5.c
> @@ -302,10 +302,8 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
>  					NULL, q6v5_wdog_interrupt,
>  					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
>  					"q6v5 wdog", q6v5);
> -	if (ret) {
> -		dev_err(&pdev->dev, "failed to acquire wdog IRQ\n");
> +	if (ret)
>  		return ret;
> -	}
>  
>  	q6v5->fatal_irq = platform_get_irq_byname(pdev, "fatal");
>  	if (q6v5->fatal_irq < 0)
> @@ -315,10 +313,8 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
>  					NULL, q6v5_fatal_interrupt,
>  					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
>  					"q6v5 fatal", q6v5);
> -	if (ret) {
> -		dev_err(&pdev->dev, "failed to acquire fatal IRQ\n");
> +	if (ret)
>  		return ret;
> -	}
>  
>  	q6v5->ready_irq = platform_get_irq_byname(pdev, "ready");
>  	if (q6v5->ready_irq < 0)
> @@ -328,10 +324,8 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
>  					NULL, q6v5_ready_interrupt,
>  					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
>  					"q6v5 ready", q6v5);
> -	if (ret) {
> -		dev_err(&pdev->dev, "failed to acquire ready IRQ\n");
> +	if (ret)
>  		return ret;
> -	}
>  
>  	q6v5->handover_irq = platform_get_irq_byname(pdev, "handover");
>  	if (q6v5->handover_irq < 0)
> @@ -342,10 +336,8 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
>  					IRQF_TRIGGER_RISING | IRQF_ONESHOT |
>  					IRQF_NO_AUTOEN,
>  					"q6v5 handover", q6v5);
> -	if (ret) {
> -		dev_err(&pdev->dev, "failed to acquire handover IRQ\n");
> +	if (ret)
>  		return ret;
> -	}
>  
>  	q6v5->stop_irq = platform_get_irq_byname(pdev, "stop-ack");
>  	if (q6v5->stop_irq < 0)
> @@ -355,10 +347,8 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
>  					NULL, q6v5_stop_interrupt,
>  					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
>  					"q6v5 stop", q6v5);
> -	if (ret) {
> -		dev_err(&pdev->dev, "failed to acquire stop-ack IRQ\n");
> +	if (ret)
>  		return ret;
> -	}
>  
>  	q6v5->state = devm_qcom_smem_state_get(&pdev->dev, "stop", &q6v5->stop_bit);
>  	if (IS_ERR(q6v5->state)) {
> diff --git a/drivers/remoteproc/qcom_sysmon.c b/drivers/remoteproc/qcom_sysmon.c
> index a0830a48b1f4..61e1038328e8 100644
> --- a/drivers/remoteproc/qcom_sysmon.c
> +++ b/drivers/remoteproc/qcom_sysmon.c
> @@ -662,8 +662,6 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
>  						IRQF_TRIGGER_RISING | IRQF_ONESHOT,
>  						"q6v5 shutdown-ack", sysmon);
>  		if (ret) {
> -			dev_err(sysmon->dev,
> -				"failed to acquire shutdown-ack IRQ\n");
>  			kfree(sysmon);
>  			return ERR_PTR(ret);
>  		}
> diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
> index 3392c9380202..e9a00efe97f6 100644
> --- a/drivers/remoteproc/qcom_wcnss.c
> +++ b/drivers/remoteproc/qcom_wcnss.c
> @@ -521,10 +521,8 @@ static int wcnss_request_irq(struct qcom_wcnss *wcnss,
>  					NULL, thread_fn,
>  					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
>  					"wcnss", wcnss);
> -	if (ret) {
> -		dev_err(&pdev->dev, "request %s IRQ failed\n", name);
> +	if (ret)
>  		return ret;
> -	}
>  
>  	/* Return the IRQ number if the IRQ was successfully acquired */
>  	return irq_number;
> diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
> index 0e5d64fbe52c..1fe4cdc0a13a 100644
> --- a/drivers/remoteproc/stm32_rproc.c
> +++ b/drivers/remoteproc/stm32_rproc.c
> @@ -682,8 +682,7 @@ static int stm32_rproc_parse_dt(struct platform_device *pdev,
>  		err = devm_request_irq(dev, irq, stm32_rproc_wdg, 0,
>  				       dev_name(dev), pdev);
>  		if (err)
> -			return dev_err_probe(dev, err,
> -					     "failed to request wdg irq\n");
> +			return err;
>  
>  		ddata->wdg_irq = irq;
>  
> -- 
> 2.34.1
> 


  parent reply	other threads:[~2026-07-20 17:34 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-17  6:52 [PATCH] remoteproc: Remove redundant dev_err()/dev_err_probe() Pan Chuang
2026-07-19 12:55 ` Paul Cercueil
2026-07-20 17:33 ` Mathieu Poirier [this message]
2026-07-21 14:45 ` Philippe Mathieu-Daudé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=al5cBMO91BeFghCz@p14s \
    --to=mathieu.poirier@linaro.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andersson@kernel.org \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=matthias.bgg@gmail.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=panchuang@vivo.com \
    --cc=paul@crapouillou.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox