From: Matthias Brugger <matthias.bgg@gmail.com>
To: Seiya Wang <seiya.wang@mediatek.com>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, srv_heupstream@mediatek.com
Subject: Re: [PATCH v5 1/1] arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile
Date: Fri, 30 Oct 2020 10:04:11 +0100 [thread overview]
Message-ID: <c51090c5-46ce-7779-fd6b-df38dc7ba7c1@gmail.com> (raw)
In-Reply-To: <5695b5cb-c57d-f6de-27b7-e9c2de6a088d@gmail.com>
On 29/10/2020 16:50, Matthias Brugger wrote:
>
>
> On 27/10/2020 11:26, Seiya Wang wrote:
>> Add basic chip support for Mediatek MT8192
>>
>> Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
>
> Pushed to v5.10-next/dts64
>
> Thanks!
>
>> ---
>> arch/arm64/boot/dts/mediatek/Makefile | 1 +
>> arch/arm64/boot/dts/mediatek/mt8192-evb.dts | 29 ++
>> arch/arm64/boot/dts/mediatek/mt8192.dtsi | 513 ++++++++++++++++++++++++++++
>> 3 files changed, 543 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8192-evb.dts
>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8192.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile
>> b/arch/arm64/boot/dts/mediatek/Makefile
>> index 3ee682c266cc..b431ee2d6cac 100644
>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>> @@ -12,4 +12,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
>> b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
>> new file mode 100644
>> index 000000000000..0205837fa698
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
>> @@ -0,0 +1,29 @@
>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>> +/*
>> + * Copyright (C) 2020 MediaTek Inc.
>> + * Author: Seiya Wang <seiya.wang@mediatek.com>
>> + */
>> +/dts-v1/;
>> +#include "mt8192.dtsi"
>> +
>> +/ {
>> + model = "MediaTek MT8192 evaluation board";
>> + compatible = "mediatek,mt8192-evb", "mediatek,mt8192";
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:921600n8";
>> + };
>> +
>> + memory@40000000 {
>> + device_type = "memory";
>> + reg = <0 0x40000000 0 0x80000000>;
>> + };
>> +};
>> +
>> +&uart0 {
>> + status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
>> b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
>> new file mode 100644
>> index 000000000000..648f0f269b8b
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
>> @@ -0,0 +1,513 @@
>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>> +/*
>> + * Copyright (C) 2020 MediaTek Inc.
>> + * Author: Seiya Wang <seiya.wang@mediatek.com>
>> + */
>> +
>> +/dts-v1/;
>> +#include <dt-bindings/clock/mt8192-clk.h>
AFAIK the clock driver is not upstream.
Did you tried to compile this at least?
I dropped it for now. If you want to get that in without the clock driver bein
accepted first, you will need to fix this patch. And please make sure it
compiles against v5.10-rc1
Regards,
Matthias
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
>> +
>> +/ {
>> + compatible = "mediatek,mt8192";
>> + interrupt-parent = <&gic>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + clk26m: oscillator0 {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <26000000>;
>> + clock-output-names = "clk26m";
>> + };
>> +
>> + clk32k: oscillator1 {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <32768>;
>> + clock-output-names = "clk32k";
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + cpu0: cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a55";
>> + reg = <0x000>;
>> + enable-method = "psci";
>> + clock-frequency = <1701000000>;
>> + next-level-cache = <&l2_0>;
>> + capacity-dmips-mhz = <530>;
>> + };
>> +
>> + cpu1: cpu@100 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a55";
>> + reg = <0x100>;
>> + enable-method = "psci";
>> + clock-frequency = <1701000000>;
>> + next-level-cache = <&l2_0>;
>> + capacity-dmips-mhz = <530>;
>> + };
>> +
>> + cpu2: cpu@200 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a55";
>> + reg = <0x200>;
>> + enable-method = "psci";
>> + clock-frequency = <1701000000>;
>> + next-level-cache = <&l2_0>;
>> + capacity-dmips-mhz = <530>;
>> + };
>> +
>> + cpu3: cpu@300 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a55";
>> + reg = <0x300>;
>> + enable-method = "psci";
>> + clock-frequency = <1701000000>;
>> + next-level-cache = <&l2_0>;
>> + capacity-dmips-mhz = <530>;
>> + };
>> +
>> + cpu4: cpu@400 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a76";
>> + reg = <0x400>;
>> + enable-method = "psci";
>> + clock-frequency = <2171000000>;
>> + next-level-cache = <&l2_1>;
>> + capacity-dmips-mhz = <1024>;
>> + };
>> +
>> + cpu5: cpu@500 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a76";
>> + reg = <0x500>;
>> + enable-method = "psci";
>> + clock-frequency = <2171000000>;
>> + next-level-cache = <&l2_1>;
>> + capacity-dmips-mhz = <1024>;
>> + };
>> +
>> + cpu6: cpu@600 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a76";
>> + reg = <0x600>;
>> + enable-method = "psci";
>> + clock-frequency = <2171000000>;
>> + next-level-cache = <&l2_1>;
>> + capacity-dmips-mhz = <1024>;
>> + };
>> +
>> + cpu7: cpu@700 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a76";
>> + reg = <0x700>;
>> + enable-method = "psci";
>> + clock-frequency = <2171000000>;
>> + next-level-cache = <&l2_1>;
>> + capacity-dmips-mhz = <1024>;
>> + };
>> +
>> + cpu-map {
>> + cluster0 {
>> + core0 {
>> + cpu = <&cpu0>;
>> + };
>> + core1 {
>> + cpu = <&cpu1>;
>> + };
>> + core2 {
>> + cpu = <&cpu2>;
>> + };
>> + core3 {
>> + cpu = <&cpu3>;
>> + };
>> + };
>> +
>> + cluster1 {
>> + core0 {
>> + cpu = <&cpu4>;
>> + };
>> + core1 {
>> + cpu = <&cpu5>;
>> + };
>> + core2 {
>> + cpu = <&cpu6>;
>> + };
>> + core3 {
>> + cpu = <&cpu7>;
>> + };
>> + };
>> + };
>> +
>> + l2_0: l2-cache0 {
>> + compatible = "cache";
>> + next-level-cache = <&l3_0>;
>> + };
>> +
>> + l2_1: l2-cache1 {
>> + compatible = "cache";
>> + next-level-cache = <&l3_0>;
>> + };
>> +
>> + l3_0: l3-cache {
>> + compatible = "cache";
>> + };
>> + };
>> +
>> + pmu-a55 {
>> + compatible = "arm,cortex-a55-pmu";
>> + interrupt-parent = <&gic>;
>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
>> + };
>> +
>> + pmu-a76 {
>> + compatible = "arm,cortex-a76-pmu";
>> + interrupt-parent = <&gic>;
>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-1.0";
>> + method = "smc";
>> + };
>> +
>> + timer: timer {
>> + compatible = "arm,armv8-timer";
>> + interrupt-parent = <&gic>;
>> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
>> + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
>> + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
>> + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clock-frequency = <13000000>;
>> + };
>> +
>> + soc {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + compatible = "simple-bus";
>> + ranges;
>> +
>> + gic: interrupt-controller@c000000 {
>> + compatible = "arm,gic-v3";
>> + #interrupt-cells = <4>;
>> + #redistributor-regions = <1>;
>> + interrupt-parent = <&gic>;
>> + interrupt-controller;
>> + reg = <0 0x0c000000 0 0x40000>,
>> + <0 0x0c040000 0 0x200000>;
>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
>> +
>> + ppi-partitions {
>> + ppi_cluster0: interrupt-partition-0 {
>> + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
>> + };
>> + ppi_cluster1: interrupt-partition-1 {
>> + affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
>> + };
>> + };
>> + };
>> +
>> + pio: pinctrl@10005000 {
>> + compatible = "mediatek,mt8192-pinctrl";
>> + reg = <0 0x10005000 0 0x1000>,
>> + <0 0x11c20000 0 0x1000>,
>> + <0 0x11d10000 0 0x1000>,
>> + <0 0x11d30000 0 0x1000>,
>> + <0 0x11d40000 0 0x1000>,
>> + <0 0x11e20000 0 0x1000>,
>> + <0 0x11e70000 0 0x1000>,
>> + <0 0x11ea0000 0 0x1000>,
>> + <0 0x11f20000 0 0x1000>,
>> + <0 0x11f30000 0 0x1000>,
>> + <0 0x1000b000 0 0x1000>;
>> + reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
>> + "iocfg_bl", "iocfg_br", "iocfg_lm",
>> + "iocfg_lb", "iocfg_rt", "iocfg_lt",
>> + "iocfg_tl", "eint";
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&pio 0 0 220>;
>> + interrupt-controller;
>> + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + systimer: timer@10017000 {
>> + compatible = "mediatek,mt8192-timer",
>> + "mediatek,mt6765-timer";
>> + reg = <0 0x10017000 0 0x1000>;
>> + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&topckgen CLK_TOP_CSW_F26M_D2>;
>> + clock-names = "clk13m";
>> + };
>> +
>> + uart0: serial@11002000 {
>> + compatible = "mediatek,mt8192-uart",
>> + "mediatek,mt6577-uart";
>> + reg = <0 0x11002000 0 0x1000>;
>> + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&clk26m>, <&clk26m>;
>> + clock-names = "baud", "bus";
>> + status = "disabled";
>> + };
>> +
>> + uart1: serial@11003000 {
>> + compatible = "mediatek,mt8192-uart",
>> + "mediatek,mt6577-uart";
>> + reg = <0 0x11003000 0 0x1000>;
>> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&clk26m>, <&clk26m>;
>> + clock-names = "baud", "bus";
>> + status = "disabled";
>> + };
>> +
>> + spi0: spi@1100a000 {
>> + compatible = "mediatek,mt8192-spi",
>> + "mediatek,mt6765-spi";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0 0x1100a000 0 0x1000>;
>> + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
>> + <&topckgen CLK_TOP_SPI_SEL>,
>> + <&infracfg CLK_INFRA_SPI0>;
>> + clock-names = "parent-clk", "sel-clk", "spi-clk";
>> + status = "disabled";
>> + };
>> +
>> + spi1: spi@11010000 {
>> + compatible = "mediatek,mt8192-spi",
>> + "mediatek,mt6765-spi";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0 0x11010000 0 0x1000>;
>> + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
>> + <&topckgen CLK_TOP_SPI_SEL>,
>> + <&infracfg CLK_INFRA_SPI1>;
>> + clock-names = "parent-clk", "sel-clk", "spi-clk";
>> + status = "disabled";
>> + };
>> +
>> + spi2: spi@11012000 {
>> + compatible = "mediatek,mt8192-spi",
>> + "mediatek,mt6765-spi";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0 0x11012000 0 0x1000>;
>> + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
>> + <&topckgen CLK_TOP_SPI_SEL>,
>> + <&infracfg CLK_INFRA_SPI2>;
>> + clock-names = "parent-clk", "sel-clk", "spi-clk";
>> + status = "disabled";
>> + };
>> +
>> + spi3: spi@11013000 {
>> + compatible = "mediatek,mt8192-spi",
>> + "mediatek,mt6765-spi";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0 0x11013000 0 0x1000>;
>> + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
>> + <&topckgen CLK_TOP_SPI_SEL>,
>> + <&infracfg CLK_INFRA_SPI3>;
>> + clock-names = "parent-clk", "sel-clk", "spi-clk";
>> + status = "disabled";
>> + };
>> +
>> + spi4: spi@11018000 {
>> + compatible = "mediatek,mt8192-spi",
>> + "mediatek,mt6765-spi";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0 0x11018000 0 0x1000>;
>> + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
>> + <&topckgen CLK_TOP_SPI_SEL>,
>> + <&infracfg CLK_INFRA_SPI4>;
>> + clock-names = "parent-clk", "sel-clk", "spi-clk";
>> + status = "disabled";
>> + };
>> +
>> + spi5: spi@11019000 {
>> + compatible = "mediatek,mt8192-spi",
>> + "mediatek,mt6765-spi";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0 0x11019000 0 0x1000>;
>> + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
>> + <&topckgen CLK_TOP_SPI_SEL>,
>> + <&infracfg CLK_INFRA_SPI5>;
>> + clock-names = "parent-clk", "sel-clk", "spi-clk";
>> + status = "disabled";
>> + };
>> +
>> + spi6: spi@1101d000 {
>> + compatible = "mediatek,mt8192-spi",
>> + "mediatek,mt6765-spi";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0 0x1101d000 0 0x1000>;
>> + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
>> + <&topckgen CLK_TOP_SPI_SEL>,
>> + <&infracfg CLK_INFRA_SPI6>;
>> + clock-names = "parent-clk", "sel-clk", "spi-clk";
>> + status = "disabled";
>> + };
>> +
>> + spi7: spi@1101e000 {
>> + compatible = "mediatek,mt8192-spi",
>> + "mediatek,mt6765-spi";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0 0x1101e000 0 0x1000>;
>> + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
>> + <&topckgen CLK_TOP_SPI_SEL>,
>> + <&infracfg CLK_INFRA_SPI7>;
>> + clock-names = "parent-clk", "sel-clk", "spi-clk";
>> + status = "disabled";
>> + };
>> +
>> + i2c3: i2c3@11cb0000 {
>> + compatible = "mediatek,mt8192-i2c";
>> + reg = <0 0x11cb0000 0 0x1000>,
>> + <0 0x10217300 0 0x80>;
>> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&clk26m>, <&clk26m>;
>> + clock-names = "main", "dma";
>> + clock-div = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c7: i2c7@11d00000 {
>> + compatible = "mediatek,mt8192-i2c";
>> + reg = <0 0x11d00000 0 0x1000>,
>> + <0 0x10217600 0 0x180>;
>> + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&clk26m>, <&clk26m>;
>> + clock-names = "main", "dma";
>> + clock-div = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c8: i2c8@11d01000 {
>> + compatible = "mediatek,mt8192-i2c";
>> + reg = <0 0x11d01000 0 0x1000>,
>> + <0 0x10217780 0 0x180>;
>> + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&clk26m>, <&clk26m>;
>> + clock-names = "main", "dma";
>> + clock-div = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c9: i2c9@11d02000 {
>> + compatible = "mediatek,mt8192-i2c";
>> + reg = <0 0x11d02000 0 0x1000>,
>> + <0 0x10217900 0 0x180>;
>> + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&clk26m>, <&clk26m>;
>> + clock-names = "main", "dma";
>> + clock-div = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c1@11d20000 {
>> + compatible = "mediatek,mt8192-i2c";
>> + reg = <0 0x11d20000 0 0x1000>,
>> + <0 0x10217100 0 0x80>;
>> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&clk26m>, <&clk26m>;
>> + clock-names = "main", "dma";
>> + clock-div = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c2@11d21000 {
>> + compatible = "mediatek,mt8192-i2c";
>> + reg = <0 0x11d21000 0 0x1000>,
>> + <0 0x10217180 0 0x180>;
>> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&clk26m>, <&clk26m>;
>> + clock-names = "main", "dma";
>> + clock-div = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c4: i2c4@11d22000 {
>> + compatible = "mediatek,mt8192-i2c";
>> + reg = <0 0x11d22000 0 0x1000>,
>> + <0 0x10217380 0 0x180>;
>> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&clk26m>, <&clk26m>;
>> + clock-names = "main", "dma";
>> + clock-div = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c5: i2c5@11e00000 {
>> + compatible = "mediatek,mt8192-i2c";
>> + reg = <0 0x11e00000 0 0x1000>,
>> + <0 0x10217500 0 0x80>;
>> + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&clk26m>, <&clk26m>;
>> + clock-names = "main", "dma";
>> + clock-div = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c0: i2c0@11f00000 {
>> + compatible = "mediatek,mt8192-i2c";
>> + reg = <0 0x11f00000 0 0x1000>,
>> + <0 0x10217080 0 0x80>;
>> + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&clk26m>, <&clk26m>;
>> + clock-names = "main", "dma";
>> + clock-div = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c6: i2c6@11f01000 {
>> + compatible = "mediatek,mt8192-i2c";
>> + reg = <0 0x11f01000 0 0x1000>,
>> + <0 0x10217580 0 0x80>;
>> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&clk26m>, <&clk26m>;
>> + clock-names = "main", "dma";
>> + clock-div = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> + };
>> +};
>>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2020-10-30 9:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-27 10:26 [PATCH v5 0/1] Add basic node support for Mediatek MT8192 SoC Seiya Wang
2020-10-27 10:26 ` [PATCH v5 1/1] arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile Seiya Wang
2020-10-29 15:50 ` Matthias Brugger
2020-10-30 9:04 ` Matthias Brugger [this message]
2020-10-30 9:32 ` Seiya Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c51090c5-46ce-7779-fd6b-df38dc7ba7c1@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=seiya.wang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox