Re: [PATCH v4 02/22] arm64: dts: mt8192: Add spmi node

[allen-kh.cheng <allen-kh.cheng@mediatek.com>]

Hi Matthias,

On Wed, 2022-03-30 at 15:21 +0800, allen-kh.cheng wrote:
> Hi Mathias,
> 
> On Wed, 2022-03-23 at 18:16 +0100, Matthias Brugger wrote:
> > 
> > On 18/03/2022 15:45, Allen-KH Cheng wrote:
> > > Add spmi node for mt8192 SoC.
> > > 
> > > Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
> > > Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > > Reviewed-by: AngeloGioacchino Del Regno <
> > > angelogioacchino.delregno@collabora.com>
> > > ---
> > >   arch/arm64/boot/dts/mediatek/mt8192.dtsi | 17 +++++++++++++++++
> > >   1 file changed, 17 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > > b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > > index 76428599444e..0f9f211ca986 100644
> > > --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > > +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > > @@ -535,6 +535,23 @@
> > >   			assigned-clock-parents = <&topckgen
> > > CLK_TOP_OSC_D10>;
> > >   		};
> > >   
> > > +		spmi: spmi@10027000 {
> > > +			compatible = "mediatek,mt6873-spmi";
> > > +			reg = <0 0x10027000 0 0x000e00>,
> > > +			      <0 0x10029000 0 0x000100>;
> > > +			reg-names = "pmif", "spmimst";
> > > +			clocks = <&infracfg CLK_INFRA_PMIC_AP>,
> > > +				 <&infracfg CLK_INFRA_PMIC_TMR>,
> > > +				 <&topckgen CLK_TOP_SPMI_MST_SEL>;
> > > +			clock-names = "pmif_sys_ck",
> > > +				      "pmif_tmr_ck",
> > > +				      "spmimst_clk_mux";
> > > +			assigned-clocks = <&topckgen
> > > CLK_TOP_PWRAP_ULPOSC_SEL>;
> > > +			assigned-clock-parents = <&topckgen
> > > CLK_TOP_OSC_D10>;
> > > +			#address-cells = <2>;
> > > +			#size-cells = <0>;
> > 
> > What do we need the address-cells and size-cells for?
> > 
> > Regards,
> > Matthias
> > 
> 
> We wiil add two regulators for board level (mt8192-asurada.dtsi).
> 
> Adress-cells and size-cells are used to dentify regulator.
> 
> &spmi {
>         grpid = <11>;
> 
>         mt6315_6: pmic@6 {
>                
> compatible = "mediatek,mt6315-regulator";
>                 reg = <0x6 0>;
> 
> 		....
>         };
> 
>         mt6315_7: pmic@7 {
>                
> compatible = "mediatek,mt6315-regulator";
>                 reg = <0x7 0>;
> 
> 		....
>         };
> };
> 
> Thanks,
> Allen
> 

I just wanto to confirm with you.

Is this way ok?

Best regards,
Allen

> > > +
> > >   		scp_adsp: clock-controller@10720000 {
> > >   			compatible = "mediatek,mt8192-
> > > scp_adsp";
> > >   			reg = <0 0x10720000 0 0x1000>;
> 
> 


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek