Re: [PATCH v8] phy: mediatek: tphy: add debugfs files

["Chunfeng Yun (云春峰)" <Chunfeng.Yun@mediatek.com>]

On Mon, 2023-02-13 at 16:21 +0800, chunfeng yun wrote:
> On Fri, 2023-02-10 at 21:01 +0530, Vinod Koul wrote:
> > On 10-02-23, 16:58, Chunfeng Yun wrote:
> > > These debugfs files are mainly used to make eye diagram test
> > > easier,
> > > especially helpful to do HQA test for a new IC without efuse
> > > enabled.
> > > 
> > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > > ---
> > > v8: abandon patch to create phy debug root file
> > >     /sys/kernel/debug/phy/ suggested by Vinod
> > 
> > Sorry that was not my suggestion
> 
> Sorry, I misunderstood you means
> > 
> > > 
> > > v6~v7: no changes
> > > 
> > > v5: using common debugfs config CONFIG_DEBUG_FS
> > > 
> > > v4: fix build warning of sometimes uninitialized variable
> > > 
> > > v3: fix typo of "debugfs" suggested by AngeloGioacchino
> > > 
> > > v2: add CONFIG_PHY_MTK_TPHY_DEBUGFS suggested by AngeloGioacchino
> > > ---
> > >  drivers/phy/mediatek/phy-mtk-tphy.c | 405
> > > +++++++++++++++++++++++++++-
> > >  1 file changed, 404 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c
> > > b/drivers/phy/mediatek/phy-mtk-tphy.c
> > > index e906a82791bd..65a95c3726bf 100644
> > > --- a/drivers/phy/mediatek/phy-mtk-tphy.c
> > > +++ b/drivers/phy/mediatek/phy-mtk-tphy.c
> > > @@ -7,6 +7,7 @@
> > >  
> > >  #include <dt-bindings/phy/phy.h>
> > >  #include <linux/clk.h>
> > > +#include <linux/debugfs.h>
> > >  #include <linux/delay.h>
> > >  #include <linux/iopoll.h>
> > >  #include <linux/mfd/syscon.h>
> > > @@ -264,6 +265,8 @@
> > >  
> > >  #define TPHY_CLKS_CNT	2
> > >  
> > > +#define USER_BUF_LEN(count) min_t(size_t, 8, (count))
> > > +
> > >  enum mtk_phy_version {
> > >  	MTK_PHY_V1 = 1,
> > >  	MTK_PHY_V2,
> > > @@ -310,6 +313,7 @@ struct mtk_phy_instance {
> > >  	struct clk_bulk_data clks[TPHY_CLKS_CNT];
> > >  	u32 index;
> > >  	u32 type;
> > > +	struct dentry *dbgfs;
> > >  	struct regmap *type_sw;
> > >  	u32 type_sw_reg;
> > >  	u32 type_sw_index;
> > > @@ -332,10 +336,391 @@ struct mtk_tphy {
> > >  	const struct mtk_phy_pdata *pdata;
> > >  	struct mtk_phy_instance **phys;
> > >  	int nphys;
> > > +	struct dentry *dbgfs_root;
> > >  	int src_ref_clk; /* MHZ, reference clock for slew rate
> > > calibrate */
> > >  	int src_coef; /* coefficient for slew rate calibrate */
> > >  };
> > 
> > I asked the struct dentry *debugfs be part of struct phy. Debugfs
> > would
> > be created by core but rather than exported, it should be populated
> > in
> > phy and you can use it here in the driver
> > 
> > >  
> 
> Ok, I'll do the following steps:
> 
> 0. put a struct dentry *debugfs in struct phy;
> 1. define a static struct dentry *phy_debugfs_root in phy-core.c,
> then
>    create a root directory (/sys/kernel/debug/phy/) for phy
> subsystem 
> in phy_core_init();
> 2. create directory for each phy under the root directory
> (/sys/kernel/debug/phy/);
>    this step has two ways:
>    A: create the directory @debugfs of struct phy in phy_create() by
> default;
>    B: provide some api for user to create/destory the directory
> @debugfs or others when need;
> 3. add private debugfs files in @debugfs of struct phy;
> 
> For the case in tphy driver, it provides some struct phy, the driver
> may want to create debugfs files which not belongs to any struct phy
> in
> the root directory (/sys/kernel/debug/phy/), then need provide a api.
> 
>    Do you have any suggestions?
>    Which way do you prefer to use in step 2?
> 
>    Thanks a lot;
> 
> > <skip>
> > > +
> > >  static struct platform_driver mtk_tphy_driver = {
> > >  	.probe		= mtk_tphy_probe,
> > > +	.remove		= mtk_tphy_remove,
> > >  	.driver		= {
> > >  		.name	= "mtk-tphy",
> > >  		.of_match_table = mtk_tphy_id_table,
> > > -- 
> > > 2.18.0
> > 
> >