Re: [PATCH v2 4/9] mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC

["Xiangsheng Hou (侯祥胜)" <Xiangsheng.Hou@mediatek.com>]

On Tue, 2022-12-06 at 13:22 +0100, AngeloGioacchino Del Regno wrote:
> Il 06/12/22 10:04, Xiangsheng Hou (侯祥胜) ha scritto:
> > Hi Angelo,
> > 
> > On Mon, 2022-12-05 at 15:21 +0100, AngeloGioacchino Del Regno
> > wrote:
> > > Il 05/12/22 07:57, Xiangsheng Hou ha scritto:
> > > > Add ECC support fot MT7986 IC.
> > > > 
> > > > Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
> > > > ---
> > > >    drivers/mtd/nand/ecc-mtk.c | 18 ++++++++++++++++++
> > > >    1 file changed, 18 insertions(+)
> > > > 
> > > > diff --git a/drivers/mtd/nand/ecc-mtk.c b/drivers/mtd/nand/ecc-
> > > > mtk.c
> > > > index 9f9b201fe706..c2f6cfa76a04 100644
> > > > --- a/drivers/mtd/nand/ecc-mtk.c
> > > > +++ b/drivers/mtd/nand/ecc-mtk.c
> > > > @@ -79,6 +79,10 @@ static const u8 ecc_strength_mt7622[] = {
> > > >    	4, 6, 8, 10, 12
> > > >    };
> > > >    
> > > > +static const u8 ecc_strength_mt7986[] = {
> > > > +	4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
> > > > +};
> > > > +
> > > >    enum mtk_ecc_regs {
> > > >    	ECC_ENCPAR00,
> > > >    	ECC_ENCIRQ_EN,
> > > > @@ -483,6 +487,17 @@ static const struct mtk_ecc_caps
> > > > mtk_ecc_caps_mt7622 = {
> > > >    	.pg_irq_sel = 0,
> > > >    };
> > > >    
> > > > +static const struct mtk_ecc_caps mtk_ecc_caps_mt7986 = {
> > > > +	.err_mask = 0x1f,
> > > 
> > > Can't we use GENMASK() to define err_mask instead?
> > > 
> > > #define MT7986_ERRNUM	GENMASK(4, 0)
> > > 
> > > P.S.: Did I get that right? Is that referred to the ERRNUM(x)
> > > bits
> > 
> > Yes, you are right.
> > I will change like
> > #define ECC_ERRMASK(x) GENMASK(x, 0),
> > since other IC driver data will use 0x3f and 0x7f err_mask.
> > 
> 
> I would prefer, instead, something like
> 
> #define MT7986_ERRNUM	GENMASK(....)
> #define MT7622_ERRNUM	GENMASK(....)
> #define MT.... (etc)
> 
> instead of a macro calling another macro.

Will do.

Thanks
Xiangsheng Hou