* Re: [PATCH 2/2] drm/rockchip: mark symbols static where possible
From: Sean Paul @ 2016-09-27 16:34 UTC (permalink / raw)
To: Baoyou Xie
Cc: Arnd Bergmann, linux-rockchip, tang.qiang007, Baoyou Xie,
Linux Kernel Mailing List, dri-devel, Matthias Brugger,
linux-mediatek, han.fei, Linux ARM Kernel
In-Reply-To: <1474789388-3284-1-git-send-email-baoyou.xie@linaro.org>
On Sun, Sep 25, 2016 at 3:43 AM, Baoyou Xie <baoyou.xie@linaro.org> wrote:
> We get 2 warnings when building kernel with W=1:
> drivers/gpu/drm/rockchip/rockchip_drm_drv.c:309:6: warning: no previous prototype for 'rockchip_drm_fb_suspend' [-Wmissing-prototypes]
> drivers/gpu/drm/rockchip/rockchip_drm_drv.c:318:6: warning: no previous prototype for 'rockchip_drm_fb_resume' [-Wmissing-prototypes]
>
> In fact, these functions are only used in the file in which they are
> declared and don't need a declaration, but can be made static.
> So this patch marks these functions with 'static'.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Applied to -misc, thanks.
Sean
> ---
> drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
> index 76eaf1d..38c3be5 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
> @@ -309,7 +309,7 @@ static struct drm_driver rockchip_drm_driver = {
> };
>
> #ifdef CONFIG_PM_SLEEP
> -void rockchip_drm_fb_suspend(struct drm_device *drm)
> +static void rockchip_drm_fb_suspend(struct drm_device *drm)
> {
> struct rockchip_drm_private *priv = drm->dev_private;
>
> @@ -318,7 +318,7 @@ void rockchip_drm_fb_suspend(struct drm_device *drm)
> console_unlock();
> }
>
> -void rockchip_drm_fb_resume(struct drm_device *drm)
> +static void rockchip_drm_fb_resume(struct drm_device *drm)
> {
> struct rockchip_drm_private *priv = drm->dev_private;
>
> --
> 2.7.4
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [PATCH] drm/mediatek: mark symbols static where possible
From: Sean Paul @ 2016-09-27 16:34 UTC (permalink / raw)
To: Baoyou Xie
Cc: Arnd Bergmann, linux-rockchip, tang.qiang007, Baoyou Xie,
Linux Kernel Mailing List, dri-devel, Matthias Brugger,
linux-mediatek, han.fei, Linux ARM Kernel
In-Reply-To: <1474789265-30142-1-git-send-email-baoyou.xie@linaro.org>
On Sun, Sep 25, 2016 at 3:41 AM, Baoyou Xie <baoyou.xie@linaro.org> wrote:
> We get 4 warnings when building kernel with W=1:
> drivers/gpu/drm/mediatek/mtk_hdmi.c:1089:6: warning: no previous prototype for 'mtk_hdmi_audio_enable' [-Wmissing-prototypes]
> drivers/gpu/drm/mediatek/mtk_hdmi.c:1095:6: warning: no previous prototype for 'mtk_hdmi_audio_disable' [-Wmissing-prototypes]
> drivers/gpu/drm/mediatek/mtk_hdmi.c:1101:5: warning: no previous prototype for 'mtk_hdmi_audio_set_param' [-Wmissing-prototypes]
> drivers/gpu/drm/mediatek/mtk_hdmi.c:1627:5: warning: no previous prototype for 'mtk_hdmi_audio_digital_mute' [-Wmissing-prototypes]
>
> In fact, both functions are only used in the file in which they are
> declared and don't need a declaration, but can be made static.
> So this patch marks both functions with 'static'.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Applied to -misc, thanks.
Sean
> ---
> drivers/gpu/drm/mediatek/mtk_hdmi.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> index 334562d..be4e19c 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> @@ -1086,19 +1086,19 @@ static int mtk_hdmi_output_init(struct mtk_hdmi *hdmi)
> return 0;
> }
>
> -void mtk_hdmi_audio_enable(struct mtk_hdmi *hdmi)
> +static void mtk_hdmi_audio_enable(struct mtk_hdmi *hdmi)
> {
> mtk_hdmi_aud_enable_packet(hdmi, true);
> hdmi->audio_enable = true;
> }
>
> -void mtk_hdmi_audio_disable(struct mtk_hdmi *hdmi)
> +static void mtk_hdmi_audio_disable(struct mtk_hdmi *hdmi)
> {
> mtk_hdmi_aud_enable_packet(hdmi, false);
> hdmi->audio_enable = false;
> }
>
> -int mtk_hdmi_audio_set_param(struct mtk_hdmi *hdmi,
> +static int mtk_hdmi_audio_set_param(struct mtk_hdmi *hdmi,
> struct hdmi_audio_param *param)
> {
> if (!hdmi->audio_enable) {
> @@ -1624,7 +1624,8 @@ static void mtk_hdmi_audio_shutdown(struct device *dev, void *data)
> mtk_hdmi_audio_disable(hdmi);
> }
>
> -int mtk_hdmi_audio_digital_mute(struct device *dev, void *data, bool enable)
> +static int
> +mtk_hdmi_audio_digital_mute(struct device *dev, void *data, bool enable)
> {
> struct mtk_hdmi *hdmi = dev_get_drvdata(dev);
>
> --
> 2.7.4
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [PATCH 1/2] drm/rockchip: add missing header dependencies
From: Sean Paul @ 2016-09-27 16:34 UTC (permalink / raw)
To: Baoyou Xie
Cc: CK HU, p.zabel, Dave Airlie, Matthias Brugger,
姚智情, Heiko Stübner, dri-devel,
Linux ARM Kernel, linux-mediatek, Linux Kernel Mailing List,
linux-rockchip, Arnd Bergmann, Baoyou Xie, han.fei, tang.qiang007
In-Reply-To: <1474789109-22010-1-git-send-email-baoyou.xie@linaro.org>
On Sun, Sep 25, 2016 at 3:38 AM, Baoyou Xie <baoyou.xie@linaro.org> wrote:
> We get 2 warnings when building kernel with W=1:
> drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:130:5: warning: no previous prototype for 'rockchip_drm_fbdev_init' [-Wmissing-prototypes]
> drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:173:6: warning: no previous prototype for 'rockchip_drm_fbdev_fini' [-Wmissing-prototypes]
>
> In fact, these functions are declared
> in drivers/gpu/drm/rockchip/rockchip_drm_fbdev.h,
> so this patch adds missing header dependencies.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Applied to -misc, thanks.
Sean
> ---
> drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c b/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c
> index 207e01d..a16c69f 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c
> @@ -20,6 +20,7 @@
> #include "rockchip_drm_drv.h"
> #include "rockchip_drm_gem.h"
> #include "rockchip_drm_fb.h"
> +#include "rockchip_drm_fbdev.h"
>
> #define PREFERRED_BPP 32
> #define to_drm_private(x) \
> --
> 2.7.4
>
^ permalink raw reply
* Re: [PATCH net-next 0/2] net: ethernet: mediatek: some bug fixes for PDAM and HW LRO
From: David Miller @ 2016-09-27 13:42 UTC (permalink / raw)
To: nelson.chang; +Cc: john, nbd, netdev, linux-mediatek, nelsonch.tw
In-Reply-To: <1474871630-4134-1-git-send-email-nelson.chang@mediatek.com>
From: Nelson Chang <nelson.chang@mediatek.com>
Date: Mon, 26 Sep 2016 14:33:48 +0800
> 1) Add to stop PDMA while stopping the frame engine
> 2) Modify the register settings for LRO relinquishments
> 3) Jump out from the waiting loop while LRO relinquishments are done
Series applied, but like Sergei I think you should have split patch
#2 into two separate patches.
You even list the changes individually here in your header
posting.
^ permalink raw reply
* RE: [PATCH net-next 2/2] net: ethernet: mediatek: bug fix to disable HW LRO
From: Nelson Chang @ 2016-09-26 11:43 UTC (permalink / raw)
To: sergei.shtylyov, john, davem; +Cc: nbd, netdev, linux-mediatek, nelsonch.tw
Hi Sergei,
Because these modifications are both related to LRO relinquishments, I
put them in a single patch.
Nelson
-----Original Message-----
From: Sergei Shtylyov [mailto:sergei.shtylyov@cogentembedded.com]
Sent: Monday, September 26, 2016 7:21 PM
To: Nelson Chang (張家祥); john@phrozen.org; davem@davemloft.net
Cc: nbd@openwrt.org; netdev@vger.kernel.org;
linux-mediatek@lists.infradead.org; nelsonch.tw@gmail.com
Subject: Re: [PATCH net-next 2/2] net: ethernet: mediatek: bug fix to
disable HW LRO
Hello.
On 9/26/2016 9:33 AM, Nelson Chang wrote:
> (1) Modify the register settings for LRO relinquishments
> (2) Jump out from the waiting loop while LRO relinquishments are done
Why this is done in a single patch?
> Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
[...]
MBR, Sergei
^ permalink raw reply
* Re: [PATCH net-next 2/2] net: ethernet: mediatek: bug fix to disable HW LRO
From: Sergei Shtylyov @ 2016-09-26 11:21 UTC (permalink / raw)
To: Nelson Chang, john, davem; +Cc: nbd, netdev, linux-mediatek, nelsonch.tw
In-Reply-To: <1474871630-4134-3-git-send-email-nelson.chang@mediatek.com>
Hello.
On 9/26/2016 9:33 AM, Nelson Chang wrote:
> (1) Modify the register settings for LRO relinquishments
> (2) Jump out from the waiting loop while LRO relinquishments are done
Why this is done in a single patch?
> Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
[...]
MBR, Sergei
^ permalink raw reply
* Re: [PATCH v8 1/4] soc: mediatek: Refine scpsys to support multiple platform
From: James Liao @ 2016-09-26 9:33 UTC (permalink / raw)
To: Matthias Brugger
Cc: Sascha Hauer, Rob Herring, Kevin Hilman, Daniel Kurtz,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In-Reply-To: <92a5bc68-0c4c-b9e1-17d7-34c83020aa37-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On Wed, 2016-09-21 at 12:25 +0200, Matthias Brugger wrote:
>
> On 19/07/16 09:04, James Liao wrote:
> > Refine scpsys driver common code to support multiple SoC / platform.
> >
> > Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > Reviewed-by: Kevin Hilman <khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> > ---
> > drivers/soc/mediatek/mtk-scpsys.c | 363 +++++++++++++++++++++++---------------
> > 1 file changed, 220 insertions(+), 143 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > index 837effe..1f3555a 100644
> > --- a/drivers/soc/mediatek/mtk-scpsys.c
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > @@ -11,17 +11,15 @@
> > * GNU General Public License for more details.
> > */
> > #include <linux/clk.h>
> > -#include <linux/delay.h>
> > +#include <linux/init.h>
> > #include <linux/io.h>
> > -#include <linux/kernel.h>
> > #include <linux/mfd/syscon.h>
> > -#include <linux/init.h>
> > #include <linux/of_device.h>
> > #include <linux/platform_device.h>
> > #include <linux/pm_domain.h>
> > -#include <linux/regmap.h>
> > -#include <linux/soc/mediatek/infracfg.h>
> > #include <linux/regulator/consumer.h>
> > +#include <linux/soc/mediatek/infracfg.h>
> > +
> > #include <dt-bindings/power/mt8173-power.h>
> >
> > #define SPM_VDE_PWR_CON 0x0210
> > @@ -34,6 +32,7 @@
> > #define SPM_MFG_2D_PWR_CON 0x02c0
> > #define SPM_MFG_ASYNC_PWR_CON 0x02c4
> > #define SPM_USB_PWR_CON 0x02cc
> > +
> > #define SPM_PWR_STATUS 0x060c
> > #define SPM_PWR_STATUS_2ND 0x0610
> >
> > @@ -55,12 +54,12 @@
> > #define PWR_STATUS_USB BIT(25)
> >
> > enum clk_id {
> > - MT8173_CLK_NONE,
> > - MT8173_CLK_MM,
> > - MT8173_CLK_MFG,
> > - MT8173_CLK_VENC,
> > - MT8173_CLK_VENC_LT,
> > - MT8173_CLK_MAX,
> > + CLK_NONE,
> > + CLK_MM,
> > + CLK_MFG,
> > + CLK_VENC,
> > + CLK_VENC_LT,
> > + CLK_MAX,
> > };
> >
> > #define MAX_CLKS 2
> > @@ -76,98 +75,6 @@ struct scp_domain_data {
> > bool active_wakeup;
> > };
> >
> > -static const struct scp_domain_data scp_domain_data[] = {
> > - [MT8173_POWER_DOMAIN_VDEC] = {
> > - .name = "vdec",
> > - .sta_mask = PWR_STATUS_VDEC,
> > - .ctl_offs = SPM_VDE_PWR_CON,
> > - .sram_pdn_bits = GENMASK(11, 8),
> > - .sram_pdn_ack_bits = GENMASK(12, 12),
> > - .clk_id = {MT8173_CLK_MM},
> > - },
> > - [MT8173_POWER_DOMAIN_VENC] = {
> > - .name = "venc",
> > - .sta_mask = PWR_STATUS_VENC,
> > - .ctl_offs = SPM_VEN_PWR_CON,
> > - .sram_pdn_bits = GENMASK(11, 8),
> > - .sram_pdn_ack_bits = GENMASK(15, 12),
> > - .clk_id = {MT8173_CLK_MM, MT8173_CLK_VENC},
> > - },
> > - [MT8173_POWER_DOMAIN_ISP] = {
> > - .name = "isp",
> > - .sta_mask = PWR_STATUS_ISP,
> > - .ctl_offs = SPM_ISP_PWR_CON,
> > - .sram_pdn_bits = GENMASK(11, 8),
> > - .sram_pdn_ack_bits = GENMASK(13, 12),
> > - .clk_id = {MT8173_CLK_MM},
> > - },
> > - [MT8173_POWER_DOMAIN_MM] = {
> > - .name = "mm",
> > - .sta_mask = PWR_STATUS_DISP,
> > - .ctl_offs = SPM_DIS_PWR_CON,
> > - .sram_pdn_bits = GENMASK(11, 8),
> > - .sram_pdn_ack_bits = GENMASK(12, 12),
> > - .clk_id = {MT8173_CLK_MM},
> > - .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MM_M0 |
> > - MT8173_TOP_AXI_PROT_EN_MM_M1,
> > - },
> > - [MT8173_POWER_DOMAIN_VENC_LT] = {
> > - .name = "venc_lt",
> > - .sta_mask = PWR_STATUS_VENC_LT,
> > - .ctl_offs = SPM_VEN2_PWR_CON,
> > - .sram_pdn_bits = GENMASK(11, 8),
> > - .sram_pdn_ack_bits = GENMASK(15, 12),
> > - .clk_id = {MT8173_CLK_MM, MT8173_CLK_VENC_LT},
> > - },
> > - [MT8173_POWER_DOMAIN_AUDIO] = {
> > - .name = "audio",
> > - .sta_mask = PWR_STATUS_AUDIO,
> > - .ctl_offs = SPM_AUDIO_PWR_CON,
> > - .sram_pdn_bits = GENMASK(11, 8),
> > - .sram_pdn_ack_bits = GENMASK(15, 12),
> > - .clk_id = {MT8173_CLK_NONE},
> > - },
> > - [MT8173_POWER_DOMAIN_USB] = {
> > - .name = "usb",
> > - .sta_mask = PWR_STATUS_USB,
> > - .ctl_offs = SPM_USB_PWR_CON,
> > - .sram_pdn_bits = GENMASK(11, 8),
> > - .sram_pdn_ack_bits = GENMASK(15, 12),
> > - .clk_id = {MT8173_CLK_NONE},
> > - .active_wakeup = true,
> > - },
> > - [MT8173_POWER_DOMAIN_MFG_ASYNC] = {
> > - .name = "mfg_async",
> > - .sta_mask = PWR_STATUS_MFG_ASYNC,
> > - .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
> > - .sram_pdn_bits = GENMASK(11, 8),
> > - .sram_pdn_ack_bits = 0,
> > - .clk_id = {MT8173_CLK_MFG},
> > - },
> > - [MT8173_POWER_DOMAIN_MFG_2D] = {
> > - .name = "mfg_2d",
> > - .sta_mask = PWR_STATUS_MFG_2D,
> > - .ctl_offs = SPM_MFG_2D_PWR_CON,
> > - .sram_pdn_bits = GENMASK(11, 8),
> > - .sram_pdn_ack_bits = GENMASK(13, 12),
> > - .clk_id = {MT8173_CLK_NONE},
> > - },
> > - [MT8173_POWER_DOMAIN_MFG] = {
> > - .name = "mfg",
> > - .sta_mask = PWR_STATUS_MFG,
> > - .ctl_offs = SPM_MFG_PWR_CON,
> > - .sram_pdn_bits = GENMASK(13, 8),
> > - .sram_pdn_ack_bits = GENMASK(21, 16),
> > - .clk_id = {MT8173_CLK_NONE},
> > - .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MFG_S |
> > - MT8173_TOP_AXI_PROT_EN_MFG_M0 |
> > - MT8173_TOP_AXI_PROT_EN_MFG_M1 |
> > - MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT,
> > - },
> > -};
> > -
> > -#define NUM_DOMAINS ARRAY_SIZE(scp_domain_data)
> > -
> > struct scp;
> >
> > struct scp_domain {
> > @@ -179,7 +86,7 @@ struct scp_domain {
> > };
> >
> > struct scp {
> > - struct scp_domain domains[NUM_DOMAINS];
> > + struct scp_domain *domains;
> > struct genpd_onecell_data pd_data;
> > struct device *dev;
> > void __iomem *base;
> > @@ -408,57 +315,69 @@ static bool scpsys_active_wakeup(struct device *dev)
> > return scpd->data->active_wakeup;
> > }
> >
> > -static int scpsys_probe(struct platform_device *pdev)
> > +static void init_clks(struct platform_device *pdev, struct clk *clk[CLK_MAX])
> > +{
> > + enum clk_id clk_ids[] = {
> > + CLK_MM,
> > + CLK_MFG,
> > + CLK_VENC,
> > + CLK_VENC_LT
> > + };
> > +
> > + static const char * const clk_names[] = {
> > + "mm",
> > + "mfg",
> > + "venc",
> > + "venc_lt",
> > + };
> > +
> > + int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(clk_ids); i++)
> > + clk[clk_ids[i]] = devm_clk_get(&pdev->dev, clk_names[i]);
>
> Should be:
> for (i = CLK_NONE + 1; i < CLK_MAX; i++)
>
> then we can get rid of clk_ids[].
I'll change it in next patch.
> > +}
> > +
> > +static struct scp *init_scp(struct platform_device *pdev,
> > + const struct scp_domain_data *scp_domain_data, int num)
> > {
> > struct genpd_onecell_data *pd_data;
> > struct resource *res;
> > - int i, j, ret;
> > + int i, j;
> > struct scp *scp;
> > - struct clk *clk[MT8173_CLK_MAX];
> > + struct clk *clk[CLK_MAX];
> >
> > scp = devm_kzalloc(&pdev->dev, sizeof(*scp), GFP_KERNEL);
> > if (!scp)
> > - return -ENOMEM;
> > + return ERR_PTR(-ENOMEM);
> >
> > scp->dev = &pdev->dev;
> >
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > scp->base = devm_ioremap_resource(&pdev->dev, res);
> > if (IS_ERR(scp->base))
> > - return PTR_ERR(scp->base);
> > -
> > - pd_data = &scp->pd_data;
> > -
> > - pd_data->domains = devm_kzalloc(&pdev->dev,
> > - sizeof(*pd_data->domains) * NUM_DOMAINS, GFP_KERNEL);
> > - if (!pd_data->domains)
> > - return -ENOMEM;
> > -
> > - clk[MT8173_CLK_MM] = devm_clk_get(&pdev->dev, "mm");
> > - if (IS_ERR(clk[MT8173_CLK_MM]))
> > - return PTR_ERR(clk[MT8173_CLK_MM]);
> > -
> > - clk[MT8173_CLK_MFG] = devm_clk_get(&pdev->dev, "mfg");
> > - if (IS_ERR(clk[MT8173_CLK_MFG]))
> > - return PTR_ERR(clk[MT8173_CLK_MFG]);
> > -
> > - clk[MT8173_CLK_VENC] = devm_clk_get(&pdev->dev, "venc");
> > - if (IS_ERR(clk[MT8173_CLK_VENC]))
> > - return PTR_ERR(clk[MT8173_CLK_VENC]);
> > -
> > - clk[MT8173_CLK_VENC_LT] = devm_clk_get(&pdev->dev, "venc_lt");
> > - if (IS_ERR(clk[MT8173_CLK_VENC_LT]))
> > - return PTR_ERR(clk[MT8173_CLK_VENC_LT]);
> > + return ERR_CAST(scp->base);
> >
> > scp->infracfg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
> > "infracfg");
> > if (IS_ERR(scp->infracfg)) {
> > dev_err(&pdev->dev, "Cannot find infracfg controller: %ld\n",
> > PTR_ERR(scp->infracfg));
> > - return PTR_ERR(scp->infracfg);
> > + return ERR_CAST(scp->infracfg);
> > }
> >
> > - for (i = 0; i < NUM_DOMAINS; i++) {
> > + scp->domains = devm_kzalloc(&pdev->dev,
> > + sizeof(*scp->domains) * num, GFP_KERNEL);
> > + if (!scp->domains)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + pd_data = &scp->pd_data;
> > +
> > + pd_data->domains = devm_kzalloc(&pdev->dev,
> > + sizeof(*pd_data->domains) * num, GFP_KERNEL);
> > + if (!pd_data->domains)
> > + return ERR_PTR(-ENOMEM);
> > +
>
> While at it, please leave this block of code between
> devm_ioremap_resource(...) and syscon_regmap_lookup_by_phandle(...)
OK, I'll change it in next patch.
Best regards,
James
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v13 4/4] arm: dts: mt2701: Use real clock for UARTs
From: Erin Lo @ 2016-09-26 9:26 UTC (permalink / raw)
To: Matthias Brugger, Mike Turquette, Stephen Boyd, Rob Herring
Cc: Arnd Bergmann, Sascha Hauer, Daniel Kurtz, Philipp Zabel,
devicetree, linux-arm-kernel, linux-kernel, linux-mediatek,
linux-clk, srv_heupstream, ms.chen, robert.chou, Erin Lo
In-Reply-To: <1474881991-17429-1-git-send-email-erin.lo@mediatek.com>
We used to use a fixed rate clock for the UARTs. Now that we have clock
support we can associate the correct clocks to the UARTs and drop the
26MHz fixed rate UART clock.
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
arch/arm/boot/dts/mt2701.dtsi | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index c9a8dbf..7eab6f4 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -73,12 +73,6 @@
#clock-cells = <0>;
};
- uart_clk: dummy26m {
- compatible = "fixed-clock";
- clock-frequency = <26000000>;
- #clock-cells = <0>;
- };
-
clk26m: oscillator@0 {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -186,7 +180,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -195,7 +190,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -204,7 +200,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -213,7 +210,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+ clock-names = "baud", "bus";
status = "disabled";
};
};
--
1.9.1
^ permalink raw reply related
* [PATCH v13 3/4] arm: dts: mt2701: Add clock controller device nodes
From: Erin Lo @ 2016-09-26 9:26 UTC (permalink / raw)
To: Matthias Brugger, Mike Turquette, Stephen Boyd, Rob Herring
Cc: Arnd Bergmann, Sascha Hauer, Daniel Kurtz, Philipp Zabel,
devicetree, linux-arm-kernel, linux-kernel, linux-mediatek,
linux-clk, srv_heupstream, ms.chen, robert.chou, James Liao,
Erin Lo
In-Reply-To: <1474881991-17429-1-git-send-email-erin.lo@mediatek.com>
From: James Liao <jamesjj.liao@mediatek.com>
Add clock controller nodes for MT2701, include topckgen, infracfg,
pericfg, apmixedsys, mmsys, imgsys, vdecsys, hifsys, ethsys and
bdpsys. This patch also add two oscillators that provide clocks for
MT2701.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
arch/arm/boot/dts/mt2701.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 18596a2..c9a8dbf 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -12,8 +12,10 @@
* GNU General Public License for more details.
*/
+#include <dt-bindings/clock/mt2701-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mt2701-resets.h>
#include "skeleton64.dtsi"
#include "mt2701-pinfunc.h"
@@ -77,6 +79,20 @@
#clock-cells = <0>;
};
+ clk26m: oscillator@0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ rtc32k: oscillator@1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ clock-output-names = "rtc32k";
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&gic>;
@@ -104,6 +120,26 @@
reg = <0 0x10005000 0 0x1000>;
};
+ topckgen: syscon@10000000 {
+ compatible = "mediatek,mt2701-topckgen", "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infracfg: syscon@10001000 {
+ compatible = "mediatek,mt2701-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pericfg: syscon@10003000 {
+ compatible = "mediatek,mt2701-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
watchdog: watchdog@10007000 {
compatible = "mediatek,mt2701-wdt",
"mediatek,mt6589-wdt";
@@ -128,6 +164,12 @@
reg = <0 0x10200100 0 0x1c>;
};
+ apmixedsys: syscon@10209000 {
+ compatible = "mediatek,mt2701-apmixedsys", "syscon";
+ reg = <0 0x10209000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic: interrupt-controller@10211000 {
compatible = "arm,cortex-a7-gic";
interrupt-controller;
--
1.9.1
^ permalink raw reply related
* [PATCH v13 2/4] reset: mediatek: Add MT2701 reset driver
From: Erin Lo @ 2016-09-26 9:26 UTC (permalink / raw)
To: Matthias Brugger, Mike Turquette, Stephen Boyd, Rob Herring
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Sascha Hauer, Arnd Bergmann,
James Liao, Erin Lo, ms.chen-NuS5LvNUpcJWk0Htik3J/w,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Shunli Wang,
Philipp Zabel, robert.chou-NuS5LvNUpcJWk0Htik3J/w,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In-Reply-To: <1474881991-17429-1-git-send-email-erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
In infrasys and perifsys, there are many reset
control bits for kinds of modules. These bits are
used as actual reset controllers to be registered
into kernel's generic reset controller framework.
Signed-off-by: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Erin Lo <erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Tested-by: John Crispin <blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Acked-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
drivers/clk/mediatek/clk-mt2701-hif.c | 6 +++++-
drivers/clk/mediatek/clk-mt2701.c | 12 ++++++++++--
2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/mediatek/clk-mt2701-hif.c b/drivers/clk/mediatek/clk-mt2701-hif.c
index e2b0039..4c0688f 100644
--- a/drivers/clk/mediatek/clk-mt2701-hif.c
+++ b/drivers/clk/mediatek/clk-mt2701-hif.c
@@ -53,8 +53,12 @@ static int mtk_hifsys_init(struct platform_device *pdev)
clk_data);
r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ return r;
- return r;
+ mtk_register_reset_controller(node, 1, 0x34);
+
+ return 0;
}
static const struct of_device_id of_match_clk_mt2701_hif[] = {
diff --git a/drivers/clk/mediatek/clk-mt2701.c b/drivers/clk/mediatek/clk-mt2701.c
index c225256..b2148b6 100644
--- a/drivers/clk/mediatek/clk-mt2701.c
+++ b/drivers/clk/mediatek/clk-mt2701.c
@@ -802,8 +802,12 @@ static int mtk_infrasys_init(struct platform_device *pdev)
infra_clk_data);
r = of_clk_add_provider(node, of_clk_src_onecell_get, infra_clk_data);
+ if (r)
+ return r;
- return r;
+ mtk_register_reset_controller(node, 2, 0x30);
+
+ return 0;
}
static const struct mtk_gate_regs peri0_cg_regs = {
@@ -920,8 +924,12 @@ static int mtk_pericfg_init(struct platform_device *pdev)
&lock, clk_data);
r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ return r;
- return r;
+ mtk_register_reset_controller(node, 2, 0x0);
+
+ return 0;
}
#define MT8590_PLL_FMAX (2000 * MHZ)
--
1.9.1
^ permalink raw reply related
* [PATCH v13 1/4] clk: mediatek: Add MT2701 clock support
From: Erin Lo @ 2016-09-26 9:26 UTC (permalink / raw)
To: Matthias Brugger, Mike Turquette, Stephen Boyd, Rob Herring
Cc: Arnd Bergmann, Sascha Hauer, Daniel Kurtz, Philipp Zabel,
devicetree, linux-arm-kernel, linux-kernel, linux-mediatek,
linux-clk, srv_heupstream, ms.chen, robert.chou, Shunli Wang,
James Liao, Erin Lo
In-Reply-To: <1474881991-17429-1-git-send-email-erin.lo@mediatek.com>
From: Shunli Wang <shunli.wang@mediatek.com>
Add MT2701 clock support, include topckgen, apmixedsys,
infracfg, pericfg and subsystem clocks.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
---
drivers/clk/mediatek/Kconfig | 43 ++
drivers/clk/mediatek/Makefile | 7 +
drivers/clk/mediatek/clk-gate.c | 52 ++
drivers/clk/mediatek/clk-gate.h | 2 +
drivers/clk/mediatek/clk-mt2701-bdp.c | 148 +++++
drivers/clk/mediatek/clk-mt2701-eth.c | 90 +++
drivers/clk/mediatek/clk-mt2701-hif.c | 87 +++
drivers/clk/mediatek/clk-mt2701-img.c | 90 +++
drivers/clk/mediatek/clk-mt2701-mm.c | 133 ++++
drivers/clk/mediatek/clk-mt2701-vdec.c | 101 +++
drivers/clk/mediatek/clk-mt2701.c | 1046 ++++++++++++++++++++++++++++++++
drivers/clk/mediatek/clk-mtk.c | 40 ++
drivers/clk/mediatek/clk-mtk.h | 41 +-
drivers/clk/mediatek/clk-pll.c | 1 +
14 files changed, 1876 insertions(+), 5 deletions(-)
create mode 100644 drivers/clk/mediatek/clk-mt2701-bdp.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-eth.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-hif.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-img.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-mm.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-vdec.c
create mode 100644 drivers/clk/mediatek/clk-mt2701.c
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 380c372..7202db5 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -6,6 +6,49 @@ config COMMON_CLK_MEDIATEK
---help---
Mediatek SoCs' clock support.
+config COMMON_CLK_MT2701
+ bool "Clock driver for Mediatek MT2701"
+ select COMMON_CLK_MEDIATEK
+ default ARCH_MEDIATEK
+ ---help---
+ This driver supports Mediatek MT2701 basic clocks.
+
+config COMMON_CLK_MT2701_MMSYS
+ bool "Clock driver for Mediatek MT2701 mmsys"
+ select COMMON_CLK_MT2701
+ ---help---
+ This driver supports Mediatek MT2701 mmsys clocks.
+
+config COMMON_CLK_MT2701_IMGSYS
+ bool "Clock driver for Mediatek MT2701 imgsys"
+ select COMMON_CLK_MT2701
+ ---help---
+ This driver supports Mediatek MT2701 imgsys clocks.
+
+config COMMON_CLK_MT2701_VDECSYS
+ bool "Clock driver for Mediatek MT2701 vdecsys"
+ select COMMON_CLK_MT2701
+ ---help---
+ This driver supports Mediatek MT2701 vdecsys clocks.
+
+config COMMON_CLK_MT2701_HIFSYS
+ bool "Clock driver for Mediatek MT2701 hifsys"
+ select COMMON_CLK_MT2701
+ ---help---
+ This driver supports Mediatek MT2701 hifsys clocks.
+
+config COMMON_CLK_MT2701_ETHSYS
+ bool "Clock driver for Mediatek MT2701 ethsys"
+ select COMMON_CLK_MT2701
+ ---help---
+ This driver supports Mediatek MT2701 ethsys clocks.
+
+config COMMON_CLK_MT2701_BDPSYS
+ bool "Clock driver for Mediatek MT2701 bdpsys"
+ select COMMON_CLK_MT2701
+ ---help---
+ This driver supports Mediatek MT2701 bdpsys clocks.
+
config COMMON_CLK_MT8135
bool "Clock driver for Mediatek MT8135"
select COMMON_CLK_MEDIATEK
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 32e7222..19ae7ef 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -1,4 +1,11 @@
obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
+obj-$(CONFIG_COMMON_CLK_MT2701) += clk-mt2701.o
+obj-$(CONFIG_COMMON_CLK_MT2701_BDPSYS) += clk-mt2701-bdp.o
+obj-$(CONFIG_COMMON_CLK_MT2701_ETHSYS) += clk-mt2701-eth.o
+obj-$(CONFIG_COMMON_CLK_MT2701_HIFSYS) += clk-mt2701-hif.o
+obj-$(CONFIG_COMMON_CLK_MT2701_IMGSYS) += clk-mt2701-img.o
+obj-$(CONFIG_COMMON_CLK_MT2701_MMSYS) += clk-mt2701-mm.o
+obj-$(CONFIG_COMMON_CLK_MT2701_VDECSYS) += clk-mt2701-vdec.o
obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o
obj-$(CONFIG_COMMON_CLK_MT8173) += clk-mt8173.o
diff --git a/drivers/clk/mediatek/clk-gate.c b/drivers/clk/mediatek/clk-gate.c
index d8787bf..934bf0e 100644
--- a/drivers/clk/mediatek/clk-gate.c
+++ b/drivers/clk/mediatek/clk-gate.c
@@ -61,6 +61,22 @@ static void mtk_cg_clr_bit(struct clk_hw *hw)
regmap_write(cg->regmap, cg->clr_ofs, BIT(cg->bit));
}
+static void mtk_cg_set_bit_no_setclr(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_mtk_clk_gate(hw);
+ u32 cgbit = BIT(cg->bit);
+
+ regmap_update_bits(cg->regmap, cg->sta_ofs, cgbit, cgbit);
+}
+
+static void mtk_cg_clr_bit_no_setclr(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_mtk_clk_gate(hw);
+ u32 cgbit = BIT(cg->bit);
+
+ regmap_update_bits(cg->regmap, cg->sta_ofs, cgbit, 0);
+}
+
static int mtk_cg_enable(struct clk_hw *hw)
{
mtk_cg_clr_bit(hw);
@@ -85,6 +101,30 @@ static void mtk_cg_disable_inv(struct clk_hw *hw)
mtk_cg_clr_bit(hw);
}
+static int mtk_cg_enable_no_setclr(struct clk_hw *hw)
+{
+ mtk_cg_clr_bit_no_setclr(hw);
+
+ return 0;
+}
+
+static void mtk_cg_disable_no_setclr(struct clk_hw *hw)
+{
+ mtk_cg_set_bit_no_setclr(hw);
+}
+
+static int mtk_cg_enable_inv_no_setclr(struct clk_hw *hw)
+{
+ mtk_cg_set_bit_no_setclr(hw);
+
+ return 0;
+}
+
+static void mtk_cg_disable_inv_no_setclr(struct clk_hw *hw)
+{
+ mtk_cg_clr_bit_no_setclr(hw);
+}
+
const struct clk_ops mtk_clk_gate_ops_setclr = {
.is_enabled = mtk_cg_bit_is_cleared,
.enable = mtk_cg_enable,
@@ -97,6 +137,18 @@ const struct clk_ops mtk_clk_gate_ops_setclr_inv = {
.disable = mtk_cg_disable_inv,
};
+const struct clk_ops mtk_clk_gate_ops_no_setclr = {
+ .is_enabled = mtk_cg_bit_is_cleared,
+ .enable = mtk_cg_enable_no_setclr,
+ .disable = mtk_cg_disable_no_setclr,
+};
+
+const struct clk_ops mtk_clk_gate_ops_no_setclr_inv = {
+ .is_enabled = mtk_cg_bit_is_set,
+ .enable = mtk_cg_enable_inv_no_setclr,
+ .disable = mtk_cg_disable_inv_no_setclr,
+};
+
struct clk *mtk_clk_register_gate(
const char *name,
const char *parent_name,
diff --git a/drivers/clk/mediatek/clk-gate.h b/drivers/clk/mediatek/clk-gate.h
index b182160..72ef89b 100644
--- a/drivers/clk/mediatek/clk-gate.h
+++ b/drivers/clk/mediatek/clk-gate.h
@@ -36,6 +36,8 @@ static inline struct mtk_clk_gate *to_mtk_clk_gate(struct clk_hw *hw)
extern const struct clk_ops mtk_clk_gate_ops_setclr;
extern const struct clk_ops mtk_clk_gate_ops_setclr_inv;
+extern const struct clk_ops mtk_clk_gate_ops_no_setclr;
+extern const struct clk_ops mtk_clk_gate_ops_no_setclr_inv;
struct clk *mtk_clk_register_gate(
const char *name,
diff --git a/drivers/clk/mediatek/clk-mt2701-bdp.c b/drivers/clk/mediatek/clk-mt2701-bdp.c
new file mode 100644
index 0000000..dbf6ab2
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-bdp.c
@@ -0,0 +1,148 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+static const struct mtk_gate_regs bdp0_cg_regs = {
+ .set_ofs = 0x0104,
+ .clr_ofs = 0x0108,
+ .sta_ofs = 0x0100,
+};
+
+static const struct mtk_gate_regs bdp1_cg_regs = {
+ .set_ofs = 0x0114,
+ .clr_ofs = 0x0118,
+ .sta_ofs = 0x0110,
+};
+
+#define GATE_BDP0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &bdp0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+#define GATE_BDP1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &bdp1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+static const struct mtk_gate bdp_clks[] = {
+ GATE_BDP0(CLK_BDP_BRG_BA, "brg_baclk", "mm_sel", 0),
+ GATE_BDP0(CLK_BDP_BRG_DRAM, "brg_dram", "mm_sel", 1),
+ GATE_BDP0(CLK_BDP_LARB_DRAM, "larb_dram", "mm_sel", 2),
+ GATE_BDP0(CLK_BDP_WR_VDI_PXL, "wr_vdi_pxl", "hdmi_0_deep340m", 3),
+ GATE_BDP0(CLK_BDP_WR_VDI_DRAM, "wr_vdi_dram", "mm_sel", 4),
+ GATE_BDP0(CLK_BDP_WR_B, "wr_bclk", "mm_sel", 5),
+ GATE_BDP0(CLK_BDP_DGI_IN, "dgi_in", "dpi1_sel", 6),
+ GATE_BDP0(CLK_BDP_DGI_OUT, "dgi_out", "dpi1_sel", 7),
+ GATE_BDP0(CLK_BDP_FMT_MAST_27, "fmt_mast_27", "dpi1_sel", 8),
+ GATE_BDP0(CLK_BDP_FMT_B, "fmt_bclk", "mm_sel", 9),
+ GATE_BDP0(CLK_BDP_OSD_B, "osd_bclk", "mm_sel", 10),
+ GATE_BDP0(CLK_BDP_OSD_DRAM, "osd_dram", "mm_sel", 11),
+ GATE_BDP0(CLK_BDP_OSD_AGENT, "osd_agent", "osd_sel", 12),
+ GATE_BDP0(CLK_BDP_OSD_PXL, "osd_pxl", "dpi1_sel", 13),
+ GATE_BDP0(CLK_BDP_RLE_B, "rle_bclk", "mm_sel", 14),
+ GATE_BDP0(CLK_BDP_RLE_AGENT, "rle_agent", "mm_sel", 15),
+ GATE_BDP0(CLK_BDP_RLE_DRAM, "rle_dram", "mm_sel", 16),
+ GATE_BDP0(CLK_BDP_F27M, "f27m", "di_sel", 17),
+ GATE_BDP0(CLK_BDP_F27M_VDOUT, "f27m_vdout", "di_sel", 18),
+ GATE_BDP0(CLK_BDP_F27_74_74, "f27_74_74", "di_sel", 19),
+ GATE_BDP0(CLK_BDP_F2FS, "f2fs", "di_sel", 20),
+ GATE_BDP0(CLK_BDP_F2FS74_148, "f2fs74_148", "di_sel", 21),
+ GATE_BDP0(CLK_BDP_FB, "fbclk", "mm_sel", 22),
+ GATE_BDP0(CLK_BDP_VDO_DRAM, "vdo_dram", "mm_sel", 23),
+ GATE_BDP0(CLK_BDP_VDO_2FS, "vdo_2fs", "di_sel", 24),
+ GATE_BDP0(CLK_BDP_VDO_B, "vdo_bclk", "mm_sel", 25),
+ GATE_BDP0(CLK_BDP_WR_DI_PXL, "wr_di_pxl", "di_sel", 26),
+ GATE_BDP0(CLK_BDP_WR_DI_DRAM, "wr_di_dram", "mm_sel", 27),
+ GATE_BDP0(CLK_BDP_WR_DI_B, "wr_di_bclk", "mm_sel", 28),
+ GATE_BDP0(CLK_BDP_NR_PXL, "nr_pxl", "nr_sel", 29),
+ GATE_BDP0(CLK_BDP_NR_DRAM, "nr_dram", "mm_sel", 30),
+ GATE_BDP0(CLK_BDP_NR_B, "nr_bclk", "mm_sel", 31),
+ GATE_BDP1(CLK_BDP_RX_F, "rx_fclk", "hadds2_fbclk", 0),
+ GATE_BDP1(CLK_BDP_RX_X, "rx_xclk", "clk26m", 1),
+ GATE_BDP1(CLK_BDP_RXPDT, "rxpdtclk", "hdmi_0_pix340m", 2),
+ GATE_BDP1(CLK_BDP_RX_CSCL_N, "rx_cscl_n", "clk26m", 3),
+ GATE_BDP1(CLK_BDP_RX_CSCL, "rx_cscl", "clk26m", 4),
+ GATE_BDP1(CLK_BDP_RX_DDCSCL_N, "rx_ddcscl_n", "hdmi_scl_rx", 5),
+ GATE_BDP1(CLK_BDP_RX_DDCSCL, "rx_ddcscl", "hdmi_scl_rx", 6),
+ GATE_BDP1(CLK_BDP_RX_VCO, "rx_vcoclk", "hadds2pll_294m", 7),
+ GATE_BDP1(CLK_BDP_RX_DP, "rx_dpclk", "hdmi_0_pll340m", 8),
+ GATE_BDP1(CLK_BDP_RX_P, "rx_pclk", "hdmi_0_pll340m", 9),
+ GATE_BDP1(CLK_BDP_RX_M, "rx_mclk", "hadds2pll_294m", 10),
+ GATE_BDP1(CLK_BDP_RX_PLL, "rx_pllclk", "hdmi_0_pix340m", 11),
+ GATE_BDP1(CLK_BDP_BRG_RT_B, "brg_rt_bclk", "mm_sel", 12),
+ GATE_BDP1(CLK_BDP_BRG_RT_DRAM, "brg_rt_dram", "mm_sel", 13),
+ GATE_BDP1(CLK_BDP_LARBRT_DRAM, "larbrt_dram", "mm_sel", 14),
+ GATE_BDP1(CLK_BDP_TMDS_SYN, "tmds_syn", "hdmi_0_pll340m", 15),
+ GATE_BDP1(CLK_BDP_HDMI_MON, "hdmi_mon", "hdmi_0_pll340m", 16),
+};
+
+static int mtk_bdpsys_init(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_BDP_NR);
+
+ mtk_clk_register_gates(node, bdp_clks, ARRAY_SIZE(bdp_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt2701_bdp[] = {
+ { .compatible = "mediatek,mt2701-bdpsys", },
+ {}
+};
+
+static int clk_mt2701_bdp_probe(struct platform_device *pdev)
+{
+ int r;
+
+ r = mtk_bdpsys_init(pdev);
+ if (r) {
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+ }
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_bdp_drv = {
+ .probe = clk_mt2701_bdp_probe,
+ .driver = {
+ .name = "clk-mt2701-bdp",
+ .of_match_table = of_match_clk_mt2701_bdp,
+ },
+};
+
+builtin_platform_driver(clk_mt2701_bdp_drv);
diff --git a/drivers/clk/mediatek/clk-mt2701-eth.c b/drivers/clk/mediatek/clk-mt2701-eth.c
new file mode 100644
index 0000000..b2a71a4
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-eth.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+static const struct mtk_gate_regs eth_cg_regs = {
+ .sta_ofs = 0x0030,
+};
+
+#define GATE_ETH(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = ð_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
+ }
+
+static const struct mtk_gate eth_clks[] = {
+ GATE_ETH(CLK_ETHSYS_HSDMA, "hsdma_clk", "ethif_sel", 5),
+ GATE_ETH(CLK_ETHSYS_ESW, "esw_clk", "ethpll_500m_ck", 6),
+ GATE_ETH(CLK_ETHSYS_GP2, "gp2_clk", "trgpll", 7),
+ GATE_ETH(CLK_ETHSYS_GP1, "gp1_clk", "ethpll_500m_ck", 8),
+ GATE_ETH(CLK_ETHSYS_PCM, "pcm_clk", "ethif_sel", 11),
+ GATE_ETH(CLK_ETHSYS_GDMA, "gdma_clk", "ethif_sel", 14),
+ GATE_ETH(CLK_ETHSYS_I2S, "i2s_clk", "ethif_sel", 17),
+ GATE_ETH(CLK_ETHSYS_CRYPTO, "crypto_clk", "ethif_sel", 29),
+};
+
+static int mtk_ethsys_init(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_ETHSYS_NR);
+
+ mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt2701_eth[] = {
+ { .compatible = "mediatek,mt2701-ethsys", },
+ {}
+};
+
+static int clk_mt2701_eth_probe(struct platform_device *pdev)
+{
+ int r;
+
+ r = mtk_ethsys_init(pdev);
+ if (r) {
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+ }
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_eth_drv = {
+ .probe = clk_mt2701_eth_probe,
+ .driver = {
+ .name = "clk-mt2701-eth",
+ .of_match_table = of_match_clk_mt2701_eth,
+ },
+};
+
+builtin_platform_driver(clk_mt2701_eth_drv);
diff --git a/drivers/clk/mediatek/clk-mt2701-hif.c b/drivers/clk/mediatek/clk-mt2701-hif.c
new file mode 100644
index 0000000..e2b0039
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-hif.c
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+static const struct mtk_gate_regs hif_cg_regs = {
+ .sta_ofs = 0x0030,
+};
+
+#define GATE_HIF(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &hif_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
+ }
+
+static const struct mtk_gate hif_clks[] = {
+ GATE_HIF(CLK_HIFSYS_USB0PHY, "usb0_phy_clk", "ethpll_500m_ck", 21),
+ GATE_HIF(CLK_HIFSYS_USB1PHY, "usb1_phy_clk", "ethpll_500m_ck", 22),
+ GATE_HIF(CLK_HIFSYS_PCIE0, "pcie0_clk", "ethpll_500m_ck", 24),
+ GATE_HIF(CLK_HIFSYS_PCIE1, "pcie1_clk", "ethpll_500m_ck", 25),
+ GATE_HIF(CLK_HIFSYS_PCIE2, "pcie2_clk", "ethpll_500m_ck", 26),
+};
+
+static int mtk_hifsys_init(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_HIFSYS_NR);
+
+ mtk_clk_register_gates(node, hif_clks, ARRAY_SIZE(hif_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt2701_hif[] = {
+ { .compatible = "mediatek,mt2701-hifsys", },
+ {}
+};
+
+static int clk_mt2701_hif_probe(struct platform_device *pdev)
+{
+ int r;
+
+ r = mtk_hifsys_init(pdev);
+ if (r) {
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+ }
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_hif_drv = {
+ .probe = clk_mt2701_hif_probe,
+ .driver = {
+ .name = "clk-mt2701-hif",
+ .of_match_table = of_match_clk_mt2701_hif,
+ },
+};
+
+builtin_platform_driver(clk_mt2701_hif_drv);
diff --git a/drivers/clk/mediatek/clk-mt2701-img.c b/drivers/clk/mediatek/clk-mt2701-img.c
new file mode 100644
index 0000000..c8a7a73
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-img.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+static const struct mtk_gate_regs img_cg_regs = {
+ .set_ofs = 0x0004,
+ .clr_ofs = 0x0008,
+ .sta_ofs = 0x0000,
+};
+
+#define GATE_IMG(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &img_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate img_clks[] = {
+ GATE_IMG(CLK_IMG_SMI_COMM, "img_smi_comm", "mm_sel", 0),
+ GATE_IMG(CLK_IMG_RESZ, "img_resz", "mm_sel", 1),
+ GATE_IMG(CLK_IMG_JPGDEC_SMI, "img_jpgdec_smi", "mm_sel", 5),
+ GATE_IMG(CLK_IMG_JPGDEC, "img_jpgdec", "mm_sel", 6),
+ GATE_IMG(CLK_IMG_VENC_LT, "img_venc_lt", "mm_sel", 8),
+ GATE_IMG(CLK_IMG_VENC, "img_venc", "mm_sel", 9),
+};
+
+static int mtk_imgsys_init(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_IMG_NR);
+
+ mtk_clk_register_gates(node, img_clks, ARRAY_SIZE(img_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt2701_img[] = {
+ { .compatible = "mediatek,mt2701-imgsys", },
+ {}
+};
+
+static int clk_mt2701_img_probe(struct platform_device *pdev)
+{
+ int r;
+
+ r = mtk_imgsys_init(pdev);
+ if (r) {
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+ }
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_img_drv = {
+ .probe = clk_mt2701_img_probe,
+ .driver = {
+ .name = "clk-mt2701-img",
+ .of_match_table = of_match_clk_mt2701_img,
+ },
+};
+
+builtin_platform_driver(clk_mt2701_img_drv);
diff --git a/drivers/clk/mediatek/clk-mt2701-mm.c b/drivers/clk/mediatek/clk-mt2701-mm.c
new file mode 100644
index 0000000..a63ea2f
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-mm.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+static const struct mtk_gate_regs disp0_cg_regs = {
+ .set_ofs = 0x0104,
+ .clr_ofs = 0x0108,
+ .sta_ofs = 0x0100,
+};
+
+static const struct mtk_gate_regs disp1_cg_regs = {
+ .set_ofs = 0x0114,
+ .clr_ofs = 0x0118,
+ .sta_ofs = 0x0110,
+};
+
+#define GATE_DISP0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &disp0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_DISP1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &disp1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate mm_clks[] = {
+ GATE_DISP0(CLK_MM_SMI_COMMON, "mm_smi_comm", "mm_sel", 0),
+ GATE_DISP0(CLK_MM_SMI_LARB0, "mm_smi_larb0", "mm_sel", 1),
+ GATE_DISP0(CLK_MM_CMDQ, "mm_cmdq", "mm_sel", 2),
+ GATE_DISP0(CLK_MM_MUTEX, "mm_mutex", "mm_sel", 3),
+ GATE_DISP0(CLK_MM_DISP_COLOR, "mm_disp_color", "mm_sel", 4),
+ GATE_DISP0(CLK_MM_DISP_BLS, "mm_disp_bls", "mm_sel", 5),
+ GATE_DISP0(CLK_MM_DISP_WDMA, "mm_disp_wdma", "mm_sel", 6),
+ GATE_DISP0(CLK_MM_DISP_RDMA, "mm_disp_rdma", "mm_sel", 7),
+ GATE_DISP0(CLK_MM_DISP_OVL, "mm_disp_ovl", "mm_sel", 8),
+ GATE_DISP0(CLK_MM_MDP_TDSHP, "mm_mdp_tdshp", "mm_sel", 9),
+ GATE_DISP0(CLK_MM_MDP_WROT, "mm_mdp_wrot", "mm_sel", 10),
+ GATE_DISP0(CLK_MM_MDP_WDMA, "mm_mdp_wdma", "mm_sel", 11),
+ GATE_DISP0(CLK_MM_MDP_RSZ1, "mm_mdp_rsz1", "mm_sel", 12),
+ GATE_DISP0(CLK_MM_MDP_RSZ0, "mm_mdp_rsz0", "mm_sel", 13),
+ GATE_DISP0(CLK_MM_MDP_RDMA, "mm_mdp_rdma", "mm_sel", 14),
+ GATE_DISP0(CLK_MM_MDP_BLS_26M, "mm_mdp_bls_26m", "pwm_sel", 15),
+ GATE_DISP0(CLK_MM_CAM_MDP, "mm_cam_mdp", "mm_sel", 16),
+ GATE_DISP0(CLK_MM_FAKE_ENG, "mm_fake_eng", "mm_sel", 17),
+ GATE_DISP0(CLK_MM_MUTEX_32K, "mm_mutex_32k", "rtc_sel", 18),
+ GATE_DISP0(CLK_MM_DISP_RDMA1, "mm_disp_rdma1", "mm_sel", 19),
+ GATE_DISP0(CLK_MM_DISP_UFOE, "mm_disp_ufoe", "mm_sel", 20),
+ GATE_DISP1(CLK_MM_DSI_ENGINE, "mm_dsi_eng", "mm_sel", 0),
+ GATE_DISP1(CLK_MM_DSI_DIG, "mm_dsi_dig", "dsi0_lntc_dsi", 1),
+ GATE_DISP1(CLK_MM_DPI_DIGL, "mm_dpi_digl", "dpi0_sel", 2),
+ GATE_DISP1(CLK_MM_DPI_ENGINE, "mm_dpi_eng", "mm_sel", 3),
+ GATE_DISP1(CLK_MM_DPI1_DIGL, "mm_dpi1_digl", "dpi1_sel", 4),
+ GATE_DISP1(CLK_MM_DPI1_ENGINE, "mm_dpi1_eng", "mm_sel", 5),
+ GATE_DISP1(CLK_MM_TVE_OUTPUT, "mm_tve_output", "tve_sel", 6),
+ GATE_DISP1(CLK_MM_TVE_INPUT, "mm_tve_input", "dpi0_sel", 7),
+ GATE_DISP1(CLK_MM_HDMI_PIXEL, "mm_hdmi_pixel", "dpi1_sel", 8),
+ GATE_DISP1(CLK_MM_HDMI_PLL, "mm_hdmi_pll", "hdmi_sel", 9),
+ GATE_DISP1(CLK_MM_HDMI_AUDIO, "mm_hdmi_audio", "apll_sel", 10),
+ GATE_DISP1(CLK_MM_HDMI_SPDIF, "mm_hdmi_spdif", "apll_sel", 11),
+ GATE_DISP1(CLK_MM_TVE_FMM, "mm_tve_fmm", "mm_sel", 14),
+};
+
+static int mtk_mmsys_init(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_MM_NR);
+
+ mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt2701_mm[] = {
+ { .compatible = "mediatek,mt2701-mmsys", },
+ {}
+};
+
+static int clk_mt2701_mm_probe(struct platform_device *pdev)
+{
+ int r;
+
+ r = mtk_mmsys_init(pdev);
+ if (r) {
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+ }
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_mm_drv = {
+ .probe = clk_mt2701_mm_probe,
+ .driver = {
+ .name = "clk-mt2701-mm",
+ .of_match_table = of_match_clk_mt2701_mm,
+ },
+};
+
+builtin_platform_driver(clk_mt2701_mm_drv);
diff --git a/drivers/clk/mediatek/clk-mt2701-vdec.c b/drivers/clk/mediatek/clk-mt2701-vdec.c
new file mode 100644
index 0000000..405e25d
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-vdec.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+static const struct mtk_gate_regs vdec0_cg_regs = {
+ .set_ofs = 0x0000,
+ .clr_ofs = 0x0004,
+ .sta_ofs = 0x0000,
+};
+
+static const struct mtk_gate_regs vdec1_cg_regs = {
+ .set_ofs = 0x0008,
+ .clr_ofs = 0x000c,
+ .sta_ofs = 0x0008,
+};
+
+#define GATE_VDEC0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &vdec0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+#define GATE_VDEC1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &vdec1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+static const struct mtk_gate vdec_clks[] = {
+ GATE_VDEC0(CLK_VDEC_CKGEN, "vdec_cken", "vdec_sel", 0),
+ GATE_VDEC1(CLK_VDEC_LARB, "vdec_larb_cken", "mm_sel", 0),
+};
+
+static int mtk_vdecsys_init(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_VDEC_NR);
+
+ mtk_clk_register_gates(node, vdec_clks, ARRAY_SIZE(vdec_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt2701_vdec[] = {
+ { .compatible = "mediatek,mt2701-vdecsys", },
+ {}
+};
+
+static int clk_mt2701_vdec_probe(struct platform_device *pdev)
+{
+ int r;
+
+ r = mtk_vdecsys_init(pdev);
+ if (r) {
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+ }
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_vdec_drv = {
+ .probe = clk_mt2701_vdec_probe,
+ .driver = {
+ .name = "clk-mt2701-vdec",
+ .of_match_table = of_match_clk_mt2701_vdec,
+ },
+};
+
+builtin_platform_driver(clk_mt2701_vdec_drv);
diff --git a/drivers/clk/mediatek/clk-mt2701.c b/drivers/clk/mediatek/clk-mt2701.c
new file mode 100644
index 0000000..c225256
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701.c
@@ -0,0 +1,1046 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+/*
+ * For some clocks, we don't care what their actual rates are. And these
+ * clocks may change their rate on different products or different scenarios.
+ * So we model these clocks' rate as 0, to denote it's not an actual rate.
+ */
+#define DUMMY_RATE 0
+
+static DEFINE_SPINLOCK(lock);
+
+static const struct mtk_fixed_clk top_fixed_clks[] = {
+ FIXED_CLK(CLK_TOP_DPI, "dpi_ck", "clk26m",
+ 108 * MHZ),
+ FIXED_CLK(CLK_TOP_DMPLL, "dmpll_ck", "clk26m",
+ 400 * MHZ),
+ FIXED_CLK(CLK_TOP_VENCPLL, "vencpll_ck", "clk26m",
+ 295750000),
+ FIXED_CLK(CLK_TOP_HDMI_0_PIX340M, "hdmi_0_pix340m", "clk26m",
+ 340 * MHZ),
+ FIXED_CLK(CLK_TOP_HDMI_0_DEEP340M, "hdmi_0_deep340m", "clk26m",
+ 340 * MHZ),
+ FIXED_CLK(CLK_TOP_HDMI_0_PLL340M, "hdmi_0_pll340m", "clk26m",
+ 340 * MHZ),
+ FIXED_CLK(CLK_TOP_HDMITX_CLKDIG_CTS, "hdmitx_dig_cts", "clk26m",
+ 300 * MHZ),
+ FIXED_CLK(CLK_TOP_HADDS2_FB, "hadds2_fbclk", "clk26m",
+ 27 * MHZ),
+ FIXED_CLK(CLK_TOP_WBG_DIG_416M, "wbg_dig_ck_416m", "clk26m",
+ 416 * MHZ),
+ FIXED_CLK(CLK_TOP_DSI0_LNTC_DSI, "dsi0_lntc_dsi", "clk26m",
+ 143 * MHZ),
+ FIXED_CLK(CLK_TOP_HDMI_SCL_RX, "hdmi_scl_rx", "clk26m",
+ 27 * MHZ),
+ FIXED_CLK(CLK_TOP_AUD_EXT1, "aud_ext1", "clk26m",
+ DUMMY_RATE),
+ FIXED_CLK(CLK_TOP_AUD_EXT2, "aud_ext2", "clk26m",
+ DUMMY_RATE),
+ FIXED_CLK(CLK_TOP_NFI1X_PAD, "nfi1x_pad", "clk26m",
+ DUMMY_RATE),
+};
+
+static const struct mtk_fixed_factor top_fixed_divs[] = {
+ FACTOR(CLK_TOP_SYSPLL, "syspll_ck", "mainpll", 1, 1),
+ FACTOR(CLK_TOP_SYSPLL_D2, "syspll_d2", "mainpll", 1, 2),
+ FACTOR(CLK_TOP_SYSPLL_D3, "syspll_d3", "mainpll", 1, 3),
+ FACTOR(CLK_TOP_SYSPLL_D5, "syspll_d5", "mainpll", 1, 5),
+ FACTOR(CLK_TOP_SYSPLL_D7, "syspll_d7", "mainpll", 1, 7),
+ FACTOR(CLK_TOP_SYSPLL1_D2, "syspll1_d2", "syspll_d2", 1, 2),
+ FACTOR(CLK_TOP_SYSPLL1_D4, "syspll1_d4", "syspll_d2", 1, 4),
+ FACTOR(CLK_TOP_SYSPLL1_D8, "syspll1_d8", "syspll_d2", 1, 8),
+ FACTOR(CLK_TOP_SYSPLL1_D16, "syspll1_d16", "syspll_d2", 1, 16),
+ FACTOR(CLK_TOP_SYSPLL2_D2, "syspll2_d2", "syspll_d3", 1, 2),
+ FACTOR(CLK_TOP_SYSPLL2_D4, "syspll2_d4", "syspll_d3", 1, 4),
+ FACTOR(CLK_TOP_SYSPLL2_D8, "syspll2_d8", "syspll_d3", 1, 8),
+ FACTOR(CLK_TOP_SYSPLL3_D2, "syspll3_d2", "syspll_d5", 1, 2),
+ FACTOR(CLK_TOP_SYSPLL3_D4, "syspll3_d4", "syspll_d5", 1, 4),
+ FACTOR(CLK_TOP_SYSPLL4_D2, "syspll4_d2", "syspll_d7", 1, 2),
+ FACTOR(CLK_TOP_SYSPLL4_D4, "syspll4_d4", "syspll_d7", 1, 4),
+
+ FACTOR(CLK_TOP_UNIVPLL, "univpll_ck", "univpll", 1, 1),
+ FACTOR(CLK_TOP_UNIVPLL_D2, "univpll_d2", "univpll", 1, 2),
+ FACTOR(CLK_TOP_UNIVPLL_D3, "univpll_d3", "univpll", 1, 3),
+ FACTOR(CLK_TOP_UNIVPLL_D5, "univpll_d5", "univpll", 1, 5),
+ FACTOR(CLK_TOP_UNIVPLL_D7, "univpll_d7", "univpll", 1, 7),
+ FACTOR(CLK_TOP_UNIVPLL_D26, "univpll_d26", "univpll", 1, 26),
+ FACTOR(CLK_TOP_UNIVPLL_D52, "univpll_d52", "univpll", 1, 52),
+ FACTOR(CLK_TOP_UNIVPLL_D108, "univpll_d108", "univpll", 1, 108),
+ FACTOR(CLK_TOP_USB_PHY48M, "usb_phy48m_ck", "univpll", 1, 26),
+ FACTOR(CLK_TOP_UNIVPLL1_D2, "univpll1_d2", "univpll_d2", 1, 2),
+ FACTOR(CLK_TOP_UNIVPLL1_D4, "univpll1_d4", "univpll_d2", 1, 4),
+ FACTOR(CLK_TOP_UNIVPLL1_D8, "univpll1_d8", "univpll_d2", 1, 8),
+ FACTOR(CLK_TOP_8BDAC, "8bdac_ck", "univpll_d2", 1, 1),
+ FACTOR(CLK_TOP_UNIVPLL2_D2, "univpll2_d2", "univpll_d3", 1, 2),
+ FACTOR(CLK_TOP_UNIVPLL2_D4, "univpll2_d4", "univpll_d3", 1, 4),
+ FACTOR(CLK_TOP_UNIVPLL2_D8, "univpll2_d8", "univpll_d3", 1, 8),
+ FACTOR(CLK_TOP_UNIVPLL2_D16, "univpll2_d16", "univpll_d3", 1, 16),
+ FACTOR(CLK_TOP_UNIVPLL2_D32, "univpll2_d32", "univpll_d3", 1, 32),
+ FACTOR(CLK_TOP_UNIVPLL3_D2, "univpll3_d2", "univpll_d5", 1, 2),
+ FACTOR(CLK_TOP_UNIVPLL3_D4, "univpll3_d4", "univpll_d5", 1, 4),
+ FACTOR(CLK_TOP_UNIVPLL3_D8, "univpll3_d8", "univpll_d5", 1, 8),
+
+ FACTOR(CLK_TOP_MSDCPLL, "msdcpll_ck", "msdcpll", 1, 1),
+ FACTOR(CLK_TOP_MSDCPLL_D2, "msdcpll_d2", "msdcpll", 1, 2),
+ FACTOR(CLK_TOP_MSDCPLL_D4, "msdcpll_d4", "msdcpll", 1, 4),
+ FACTOR(CLK_TOP_MSDCPLL_D8, "msdcpll_d8", "msdcpll", 1, 8),
+
+ FACTOR(CLK_TOP_MMPLL, "mmpll_ck", "mmpll", 1, 1),
+ FACTOR(CLK_TOP_MMPLL_D2, "mmpll_d2", "mmpll", 1, 2),
+
+ FACTOR(CLK_TOP_DMPLL_D2, "dmpll_d2", "dmpll_ck", 1, 2),
+ FACTOR(CLK_TOP_DMPLL_D4, "dmpll_d4", "dmpll_ck", 1, 4),
+ FACTOR(CLK_TOP_DMPLL_X2, "dmpll_x2", "dmpll_ck", 1, 1),
+
+ FACTOR(CLK_TOP_TVDPLL, "tvdpll_ck", "tvdpll", 1, 1),
+ FACTOR(CLK_TOP_TVDPLL_D2, "tvdpll_d2", "tvdpll", 1, 2),
+ FACTOR(CLK_TOP_TVDPLL_D4, "tvdpll_d4", "tvdpll", 1, 4),
+
+ FACTOR(CLK_TOP_VDECPLL, "vdecpll_ck", "vdecpll", 1, 1),
+ FACTOR(CLK_TOP_TVD2PLL, "tvd2pll_ck", "tvd2pll", 1, 1),
+ FACTOR(CLK_TOP_TVD2PLL_D2, "tvd2pll_d2", "tvd2pll", 1, 2),
+
+ FACTOR(CLK_TOP_MIPIPLL, "mipipll", "dpi_ck", 1, 1),
+ FACTOR(CLK_TOP_MIPIPLL_D2, "mipipll_d2", "dpi_ck", 1, 2),
+ FACTOR(CLK_TOP_MIPIPLL_D4, "mipipll_d4", "dpi_ck", 1, 4),
+
+ FACTOR(CLK_TOP_HDMIPLL, "hdmipll_ck", "hdmitx_dig_cts", 1, 1),
+ FACTOR(CLK_TOP_HDMIPLL_D2, "hdmipll_d2", "hdmitx_dig_cts", 1, 2),
+ FACTOR(CLK_TOP_HDMIPLL_D3, "hdmipll_d3", "hdmitx_dig_cts", 1, 3),
+
+ FACTOR(CLK_TOP_ARMPLL_1P3G, "armpll_1p3g_ck", "armpll", 1, 1),
+
+ FACTOR(CLK_TOP_AUDPLL, "audpll", "audpll_sel", 1, 1),
+ FACTOR(CLK_TOP_AUDPLL_D4, "audpll_d4", "audpll_sel", 1, 4),
+ FACTOR(CLK_TOP_AUDPLL_D8, "audpll_d8", "audpll_sel", 1, 8),
+ FACTOR(CLK_TOP_AUDPLL_D16, "audpll_d16", "audpll_sel", 1, 16),
+ FACTOR(CLK_TOP_AUDPLL_D24, "audpll_d24", "audpll_sel", 1, 24),
+
+ FACTOR(CLK_TOP_AUD1PLL_98M, "aud1pll_98m_ck", "aud1pll", 1, 3),
+ FACTOR(CLK_TOP_AUD2PLL_90M, "aud2pll_90m_ck", "aud2pll", 1, 3),
+ FACTOR(CLK_TOP_HADDS2PLL_98M, "hadds2pll_98m", "hadds2pll", 1, 3),
+ FACTOR(CLK_TOP_HADDS2PLL_294M, "hadds2pll_294m", "hadds2pll", 1, 1),
+ FACTOR(CLK_TOP_ETHPLL_500M, "ethpll_500m_ck", "ethpll", 1, 1),
+ FACTOR(CLK_TOP_CLK26M_D8, "clk26m_d8", "clk26m", 1, 8),
+ FACTOR(CLK_TOP_32K_INTERNAL, "32k_internal", "clk26m", 1, 793),
+ FACTOR(CLK_TOP_32K_EXTERNAL, "32k_external", "rtc32k", 1, 1),
+};
+
+static const char * const axi_parents[] = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll_d5",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll2_d2",
+ "mmpll_d2",
+ "dmpll_d2"
+};
+
+static const char * const mem_parents[] = {
+ "clk26m",
+ "dmpll_ck"
+};
+
+static const char * const ddrphycfg_parents[] = {
+ "clk26m",
+ "syspll1_d8"
+};
+
+static const char * const mm_parents[] = {
+ "clk26m",
+ "vencpll_ck",
+ "syspll1_d2",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll1_d2",
+ "univpll2_d2",
+ "dmpll_ck"
+};
+
+static const char * const pwm_parents[] = {
+ "clk26m",
+ "univpll2_d4",
+ "univpll3_d2",
+ "univpll1_d4",
+};
+
+static const char * const vdec_parents[] = {
+ "clk26m",
+ "vdecpll_ck",
+ "syspll_d5",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll2_d2",
+ "vencpll_ck",
+ "msdcpll_d2",
+ "mmpll_d2"
+};
+
+static const char * const mfg_parents[] = {
+ "clk26m",
+ "mmpll_ck",
+ "dmpll_x2_ck",
+ "msdcpll_ck",
+ "clk26m",
+ "syspll_d3",
+ "univpll_d3",
+ "univpll1_d2"
+};
+
+static const char * const camtg_parents[] = {
+ "clk26m",
+ "univpll_d26",
+ "univpll2_d2",
+ "syspll3_d2",
+ "syspll3_d4",
+ "msdcpll_d2",
+ "mmpll_d2"
+};
+
+static const char * const uart_parents[] = {
+ "clk26m",
+ "univpll2_d8"
+};
+
+static const char * const spi_parents[] = {
+ "clk26m",
+ "syspll3_d2",
+ "syspll4_d2",
+ "univpll2_d4",
+ "univpll1_d8"
+};
+
+static const char * const usb20_parents[] = {
+ "clk26m",
+ "univpll1_d8",
+ "univpll3_d4"
+};
+
+static const char * const msdc30_parents[] = {
+ "clk26m",
+ "msdcpll_d2",
+ "syspll2_d2",
+ "syspll1_d4",
+ "univpll1_d4",
+ "univpll2_d4"
+};
+
+static const char * const audio_parents[] = {
+ "clk26m",
+ "syspll1_d16"
+};
+
+static const char * const aud_intbus_parents[] = {
+ "clk26m",
+ "syspll1_d4",
+ "syspll3_d2",
+ "syspll4_d2",
+ "univpll3_d2",
+ "univpll2_d4"
+};
+
+static const char * const pmicspi_parents[] = {
+ "clk26m",
+ "syspll1_d8",
+ "syspll2_d4",
+ "syspll4_d2",
+ "syspll3_d4",
+ "syspll2_d8",
+ "syspll1_d16",
+ "univpll3_d4",
+ "univpll_d26",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const scp_parents[] = {
+ "clk26m",
+ "syspll1_d8",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const dpi0_parents[] = {
+ "clk26m",
+ "mipipll",
+ "mipipll_d2",
+ "mipipll_d4",
+ "clk26m",
+ "tvdpll_ck",
+ "tvdpll_d2",
+ "tvdpll_d4"
+};
+
+static const char * const dpi1_parents[] = {
+ "clk26m",
+ "tvdpll_ck",
+ "tvdpll_d2",
+ "tvdpll_d4"
+};
+
+static const char * const tve_parents[] = {
+ "clk26m",
+ "mipipll",
+ "mipipll_d2",
+ "mipipll_d4",
+ "clk26m",
+ "tvdpll_ck",
+ "tvdpll_d2",
+ "tvdpll_d4"
+};
+
+static const char * const hdmi_parents[] = {
+ "clk26m",
+ "hdmipll_ck",
+ "hdmipll_d2",
+ "hdmipll_d3"
+};
+
+static const char * const apll_parents[] = {
+ "clk26m",
+ "audpll",
+ "audpll_d4",
+ "audpll_d8",
+ "audpll_d16",
+ "audpll_d24",
+ "clk26m",
+ "clk26m"
+};
+
+static const char * const rtc_parents[] = {
+ "32k_internal",
+ "32k_external",
+ "clk26m",
+ "univpll3_d8"
+};
+
+static const char * const nfi2x_parents[] = {
+ "clk26m",
+ "syspll2_d2",
+ "syspll_d7",
+ "univpll3_d2",
+ "syspll2_d4",
+ "univpll3_d4",
+ "syspll4_d4",
+ "clk26m"
+};
+
+static const char * const emmc_hclk_parents[] = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll1_d4",
+ "syspll2_d2"
+};
+
+static const char * const flash_parents[] = {
+ "clk26m_d8",
+ "clk26m",
+ "syspll2_d8",
+ "syspll3_d4",
+ "univpll3_d4",
+ "syspll4_d2",
+ "syspll2_d4",
+ "univpll2_d4"
+};
+
+static const char * const di_parents[] = {
+ "clk26m",
+ "tvd2pll_ck",
+ "tvd2pll_d2",
+ "clk26m"
+};
+
+static const char * const nr_osd_parents[] = {
+ "clk26m",
+ "vencpll_ck",
+ "syspll1_d2",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll1_d2",
+ "univpll2_d2",
+ "dmpll_ck"
+};
+
+static const char * const hdmirx_bist_parents[] = {
+ "clk26m",
+ "syspll_d3",
+ "clk26m",
+ "syspll1_d16",
+ "syspll4_d2",
+ "syspll1_d4",
+ "vencpll_ck",
+ "clk26m"
+};
+
+static const char * const intdir_parents[] = {
+ "clk26m",
+ "mmpll_ck",
+ "syspll_d2",
+ "univpll_d2"
+};
+
+static const char * const asm_parents[] = {
+ "clk26m",
+ "univpll2_d4",
+ "univpll2_d2",
+ "syspll_d5"
+};
+
+static const char * const ms_card_parents[] = {
+ "clk26m",
+ "univpll3_d8",
+ "syspll4_d4"
+};
+
+static const char * const ethif_parents[] = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll_d5",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll1_d2",
+ "dmpll_ck",
+ "dmpll_d2"
+};
+
+static const char * const hdmirx_parents[] = {
+ "clk26m",
+ "univpll_d52"
+};
+
+static const char * const cmsys_parents[] = {
+ "clk26m",
+ "syspll1_d2",
+ "univpll1_d2",
+ "univpll_d5",
+ "syspll_d5",
+ "syspll2_d2",
+ "syspll1_d4",
+ "syspll3_d2",
+ "syspll2_d4",
+ "syspll1_d8",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m"
+};
+
+static const char * const clk_8bdac_parents[] = {
+ "32k_internal",
+ "8bdac_ck",
+ "clk26m",
+ "clk26m"
+};
+
+static const char * const aud2dvd_parents[] = {
+ "a1sys_hp_ck",
+ "a2sys_hp_ck"
+};
+
+static const char * const padmclk_parents[] = {
+ "clk26m",
+ "univpll_d26",
+ "univpll_d52",
+ "univpll_d108",
+ "univpll2_d8",
+ "univpll2_d16",
+ "univpll2_d32"
+};
+
+static const char * const aud_mux_parents[] = {
+ "clk26m",
+ "aud1pll_98m_ck",
+ "aud2pll_90m_ck",
+ "hadds2pll_98m",
+ "audio_ext1_ck",
+ "audio_ext2_ck"
+};
+
+static const char * const aud_src_parents[] = {
+ "aud_mux1_sel",
+ "aud_mux2_sel"
+};
+
+static const char * const cpu_parents[] = {
+ "clk26m",
+ "armpll",
+ "mainpll",
+ "mmpll"
+};
+
+static const struct mtk_composite top_muxes[] = {
+ MUX_GATE_FLAGS(CLK_TOP_AXI_SEL, "axi_sel", axi_parents,
+ 0x0040, 0, 3, 7, CLK_IS_CRITICAL),
+ MUX_GATE_FLAGS(CLK_TOP_MEM_SEL, "mem_sel", mem_parents,
+ 0x0040, 8, 1, 15, CLK_IS_CRITICAL),
+ MUX_GATE_FLAGS(CLK_TOP_DDRPHYCFG_SEL, "ddrphycfg_sel",
+ ddrphycfg_parents, 0x0040, 16, 1, 23, CLK_IS_CRITICAL),
+ MUX_GATE(CLK_TOP_MM_SEL, "mm_sel", mm_parents,
+ 0x0040, 24, 3, 31),
+
+ MUX_GATE(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents,
+ 0x0050, 0, 2, 7),
+ MUX_GATE(CLK_TOP_VDEC_SEL, "vdec_sel", vdec_parents,
+ 0x0050, 8, 4, 15),
+ MUX_GATE(CLK_TOP_MFG_SEL, "mfg_sel", mfg_parents,
+ 0x0050, 16, 3, 23),
+ MUX_GATE(CLK_TOP_CAMTG_SEL, "camtg_sel", camtg_parents,
+ 0x0050, 24, 3, 31),
+ MUX_GATE(CLK_TOP_UART_SEL, "uart_sel", uart_parents,
+ 0x0060, 0, 1, 7),
+
+ MUX_GATE(CLK_TOP_SPI0_SEL, "spi0_sel", spi_parents,
+ 0x0060, 8, 3, 15),
+ MUX_GATE(CLK_TOP_USB20_SEL, "usb20_sel", usb20_parents,
+ 0x0060, 16, 2, 23),
+ MUX_GATE(CLK_TOP_MSDC30_0_SEL, "msdc30_0_sel", msdc30_parents,
+ 0x0060, 24, 3, 31),
+
+ MUX_GATE(CLK_TOP_MSDC30_1_SEL, "msdc30_1_sel", msdc30_parents,
+ 0x0070, 0, 3, 7),
+ MUX_GATE(CLK_TOP_MSDC30_2_SEL, "msdc30_2_sel", msdc30_parents,
+ 0x0070, 8, 3, 15),
+ MUX_GATE(CLK_TOP_AUDIO_SEL, "audio_sel", msdc30_parents,
+ 0x0070, 16, 1, 23),
+ MUX_GATE(CLK_TOP_AUDINTBUS_SEL, "aud_intbus_sel", aud_intbus_parents,
+ 0x0070, 24, 3, 31),
+
+ MUX_GATE(CLK_TOP_PMICSPI_SEL, "pmicspi_sel", pmicspi_parents,
+ 0x0080, 0, 4, 7),
+ MUX_GATE(CLK_TOP_SCP_SEL, "scp_sel", scp_parents,
+ 0x0080, 8, 2, 15),
+ MUX_GATE(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents,
+ 0x0080, 16, 3, 23),
+ MUX_GATE(CLK_TOP_DPI1_SEL, "dpi1_sel", dpi1_parents,
+ 0x0080, 24, 2, 31),
+
+ MUX_GATE(CLK_TOP_TVE_SEL, "tve_sel", tve_parents,
+ 0x0090, 0, 3, 7),
+ MUX_GATE(CLK_TOP_HDMI_SEL, "hdmi_sel", hdmi_parents,
+ 0x0090, 8, 2, 15),
+ MUX_GATE(CLK_TOP_APLL_SEL, "apll_sel", apll_parents,
+ 0x0090, 16, 3, 23),
+
+ MUX_GATE_FLAGS(CLK_TOP_RTC_SEL, "rtc_sel", rtc_parents,
+ 0x00A0, 0, 2, 7, CLK_IS_CRITICAL),
+ MUX_GATE(CLK_TOP_NFI2X_SEL, "nfi2x_sel", nfi2x_parents,
+ 0x00A0, 8, 3, 15),
+ MUX_GATE(CLK_TOP_EMMC_HCLK_SEL, "emmc_hclk_sel", emmc_hclk_parents,
+ 0x00A0, 24, 2, 31),
+
+ MUX_GATE(CLK_TOP_FLASH_SEL, "flash_sel", flash_parents,
+ 0x00B0, 0, 3, 7),
+ MUX_GATE(CLK_TOP_DI_SEL, "di_sel", di_parents,
+ 0x00B0, 8, 2, 15),
+ MUX_GATE(CLK_TOP_NR_SEL, "nr_sel", nr_osd_parents,
+ 0x00B0, 16, 3, 23),
+ MUX_GATE(CLK_TOP_OSD_SEL, "osd_sel", nr_osd_parents,
+ 0x00B0, 24, 3, 31),
+
+ MUX_GATE(CLK_TOP_HDMIRX_BIST_SEL, "hdmirx_bist_sel",
+ hdmirx_bist_parents, 0x00C0, 0, 3, 7),
+ MUX_GATE(CLK_TOP_INTDIR_SEL, "intdir_sel", intdir_parents,
+ 0x00C0, 8, 2, 15),
+ MUX_GATE(CLK_TOP_ASM_I_SEL, "asm_i_sel", asm_parents,
+ 0x00C0, 16, 2, 23),
+ MUX_GATE(CLK_TOP_ASM_M_SEL, "asm_m_sel", asm_parents,
+ 0x00C0, 24, 3, 31),
+
+ MUX_GATE(CLK_TOP_ASM_H_SEL, "asm_h_sel", asm_parents,
+ 0x00D0, 0, 2, 7),
+ MUX_GATE(CLK_TOP_MS_CARD_SEL, "ms_card_sel", ms_card_parents,
+ 0x00D0, 16, 2, 23),
+ MUX_GATE(CLK_TOP_ETHIF_SEL, "ethif_sel", ethif_parents,
+ 0x00D0, 24, 3, 31),
+
+ MUX_GATE(CLK_TOP_HDMIRX26_24_SEL, "hdmirx26_24_sel", hdmirx_parents,
+ 0x00E0, 0, 1, 7),
+ MUX_GATE(CLK_TOP_MSDC30_3_SEL, "msdc30_3_sel", msdc30_parents,
+ 0x00E0, 8, 3, 15),
+ MUX_GATE(CLK_TOP_CMSYS_SEL, "cmsys_sel", cmsys_parents,
+ 0x00E0, 16, 4, 23),
+
+ MUX_GATE(CLK_TOP_SPI1_SEL, "spi2_sel", spi_parents,
+ 0x00E0, 24, 3, 31),
+ MUX_GATE(CLK_TOP_SPI2_SEL, "spi1_sel", spi_parents,
+ 0x00F0, 0, 3, 7),
+ MUX_GATE(CLK_TOP_8BDAC_SEL, "8bdac_sel", clk_8bdac_parents,
+ 0x00F0, 8, 2, 15),
+ MUX_GATE(CLK_TOP_AUD2DVD_SEL, "aud2dvd_sel", aud2dvd_parents,
+ 0x00F0, 16, 1, 23),
+
+ MUX(CLK_TOP_PADMCLK_SEL, "padmclk_sel", padmclk_parents,
+ 0x0100, 0, 3),
+
+ MUX(CLK_TOP_AUD_MUX1_SEL, "aud_mux1_sel", aud_mux_parents,
+ 0x012c, 0, 3),
+ MUX(CLK_TOP_AUD_MUX2_SEL, "aud_mux2_sel", aud_mux_parents,
+ 0x012c, 3, 3),
+ MUX(CLK_TOP_AUDPLL_MUX_SEL, "audpll_sel", aud_mux_parents,
+ 0x012c, 6, 3),
+ MUX_GATE(CLK_TOP_AUD_K1_SRC_SEL, "aud_k1_src_sel", aud_src_parents,
+ 0x012c, 15, 1, 23),
+ MUX_GATE(CLK_TOP_AUD_K2_SRC_SEL, "aud_k2_src_sel", aud_src_parents,
+ 0x012c, 16, 1, 24),
+ MUX_GATE(CLK_TOP_AUD_K3_SRC_SEL, "aud_k3_src_sel", aud_src_parents,
+ 0x012c, 17, 1, 25),
+ MUX_GATE(CLK_TOP_AUD_K4_SRC_SEL, "aud_k4_src_sel", aud_src_parents,
+ 0x012c, 18, 1, 26),
+ MUX_GATE(CLK_TOP_AUD_K5_SRC_SEL, "aud_k5_src_sel", aud_src_parents,
+ 0x012c, 19, 1, 27),
+ MUX_GATE(CLK_TOP_AUD_K6_SRC_SEL, "aud_k6_src_sel", aud_src_parents,
+ 0x012c, 20, 1, 28),
+};
+
+static const struct mtk_clk_divider top_adj_divs[] = {
+ DIV_ADJ(CLK_TOP_AUD_EXTCK1_DIV, "audio_ext1_ck", "aud_ext1",
+ 0x0120, 0, 8),
+ DIV_ADJ(CLK_TOP_AUD_EXTCK2_DIV, "audio_ext2_ck", "aud_ext2",
+ 0x0120, 8, 8),
+ DIV_ADJ(CLK_TOP_AUD_MUX1_DIV, "aud_mux1_div", "aud_mux1_sel",
+ 0x0120, 16, 8),
+ DIV_ADJ(CLK_TOP_AUD_MUX2_DIV, "aud_mux2_div", "aud_mux2_sel",
+ 0x0120, 24, 8),
+ DIV_ADJ(CLK_TOP_AUD_K1_SRC_DIV, "aud_k1_src_div", "aud_k1_src_sel",
+ 0x0124, 0, 8),
+ DIV_ADJ(CLK_TOP_AUD_K2_SRC_DIV, "aud_k2_src_div", "aud_k2_src_sel",
+ 0x0124, 8, 8),
+ DIV_ADJ(CLK_TOP_AUD_K3_SRC_DIV, "aud_k3_src_div", "aud_k3_src_sel",
+ 0x0124, 16, 8),
+ DIV_ADJ(CLK_TOP_AUD_K4_SRC_DIV, "aud_k4_src_div", "aud_k4_src_sel",
+ 0x0124, 24, 8),
+ DIV_ADJ(CLK_TOP_AUD_K5_SRC_DIV, "aud_k5_src_div", "aud_k5_src_sel",
+ 0x0128, 0, 8),
+ DIV_ADJ(CLK_TOP_AUD_K6_SRC_DIV, "aud_k6_src_div", "aud_k6_src_sel",
+ 0x0128, 8, 8),
+};
+
+static const struct mtk_gate_regs top_aud_cg_regs = {
+ .sta_ofs = 0x012C,
+};
+
+#define GATE_TOP_AUD(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &top_aud_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr, \
+ }
+
+static const struct mtk_gate top_clks[] = {
+ GATE_TOP_AUD(CLK_TOP_AUD_48K_TIMING, "a1sys_hp_ck", "aud_mux1_div",
+ 21),
+ GATE_TOP_AUD(CLK_TOP_AUD_44K_TIMING, "a2sys_hp_ck", "aud_mux2_div",
+ 22),
+ GATE_TOP_AUD(CLK_TOP_AUD_I2S1_MCLK, "aud_i2s1_mclk", "aud_k1_src_div",
+ 23),
+ GATE_TOP_AUD(CLK_TOP_AUD_I2S2_MCLK, "aud_i2s2_mclk", "aud_k2_src_div",
+ 24),
+ GATE_TOP_AUD(CLK_TOP_AUD_I2S3_MCLK, "aud_i2s3_mclk", "aud_k3_src_div",
+ 25),
+ GATE_TOP_AUD(CLK_TOP_AUD_I2S4_MCLK, "aud_i2s4_mclk", "aud_k4_src_div",
+ 26),
+ GATE_TOP_AUD(CLK_TOP_AUD_I2S5_MCLK, "aud_i2s5_mclk", "aud_k5_src_div",
+ 27),
+ GATE_TOP_AUD(CLK_TOP_AUD_I2S6_MCLK, "aud_i2s6_mclk", "aud_k6_src_div",
+ 28),
+};
+
+void __iomem *devm_of_iomap(struct device *dev, int index)
+{
+ struct resource res;
+
+ if (!dev)
+ return NULL;
+
+ if (of_address_to_resource(dev->of_node, index, &res))
+ return NULL;
+
+ return devm_ioremap(dev, res.start, resource_size(&res));
+}
+
+static int mtk_topckgen_init(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ void __iomem *base;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ base = devm_of_iomap(&pdev->dev, 0);
+ if (!base)
+ return -ENOMEM;
+
+ clk_data = mtk_alloc_clk_data(CLK_TOP_NR);
+
+ mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
+ clk_data);
+
+ mtk_clk_register_factors(top_fixed_divs, ARRAY_SIZE(top_fixed_divs),
+ clk_data);
+
+ mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes),
+ base, &lock, clk_data);
+
+ mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs),
+ base, &lock, clk_data);
+
+ mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return r;
+}
+
+static const struct mtk_gate_regs infra_cg_regs = {
+ .set_ofs = 0x0040,
+ .clr_ofs = 0x0044,
+ .sta_ofs = 0x0048,
+};
+
+#define GATE_ICG(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &infra_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate infra_clks[] = {
+ GATE_ICG(CLK_INFRA_DBG, "dbgclk", "axi_sel", 0),
+ GATE_ICG(CLK_INFRA_SMI, "smi_ck", "mm_sel", 1),
+ GATE_ICG(CLK_INFRA_QAXI_CM4, "cm4_ck", "axi_sel", 2),
+ GATE_ICG(CLK_INFRA_AUD_SPLIN_B, "audio_splin_bck", "hadds2pll_294m", 4),
+ GATE_ICG(CLK_INFRA_AUDIO, "audio_ck", "clk26m", 5),
+ GATE_ICG(CLK_INFRA_EFUSE, "efuse_ck", "clk26m", 6),
+ GATE_ICG(CLK_INFRA_L2C_SRAM, "l2c_sram_ck", "mm_sel", 7),
+ GATE_ICG(CLK_INFRA_M4U, "m4u_ck", "mem_sel", 8),
+ GATE_ICG(CLK_INFRA_CONNMCU, "connsys_bus", "wbg_dig_ck_416m", 12),
+ GATE_ICG(CLK_INFRA_TRNG, "trng_ck", "axi_sel", 13),
+ GATE_ICG(CLK_INFRA_RAMBUFIF, "rambufif_ck", "mem_sel", 14),
+ GATE_ICG(CLK_INFRA_CPUM, "cpum_ck", "mem_sel", 15),
+ GATE_ICG(CLK_INFRA_KP, "kp_ck", "axi_sel", 16),
+ GATE_ICG(CLK_INFRA_CEC, "cec_ck", "rtc_sel", 18),
+ GATE_ICG(CLK_INFRA_IRRX, "irrx_ck", "axi_sel", 19),
+ GATE_ICG(CLK_INFRA_PMICSPI, "pmicspi_ck", "pmicspi_sel", 22),
+ GATE_ICG(CLK_INFRA_PMICWRAP, "pmicwrap_ck", "axi_sel", 23),
+ GATE_ICG(CLK_INFRA_DDCCI, "ddcci_ck", "axi_sel", 24),
+};
+
+static const struct mtk_fixed_factor infra_fixed_divs[] = {
+ FACTOR(CLK_INFRA_CLK_13M, "clk13m", "clk26m", 1, 2),
+};
+
+static struct clk_onecell_data *infra_clk_data;
+
+static void mtk_infrasys_init_early(struct device_node *node)
+{
+ int r, i;
+
+ if (!infra_clk_data) {
+ infra_clk_data = mtk_alloc_clk_data(CLK_INFRA_NR);
+
+ for (i = 0; i < CLK_INFRA_NR; i++)
+ infra_clk_data->clks[i] = ERR_PTR(-EPROBE_DEFER);
+ }
+
+ mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
+ infra_clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, infra_clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
+CLK_OF_DECLARE_DRIVER(mtk_infra, "mediatek,mt2701-infracfg",
+ mtk_infrasys_init_early);
+
+static int mtk_infrasys_init(struct platform_device *pdev)
+{
+ int r, i;
+ struct device_node *node = pdev->dev.of_node;
+
+ if (!infra_clk_data) {
+ infra_clk_data = mtk_alloc_clk_data(CLK_INFRA_NR);
+ } else {
+ for (i = 0; i < CLK_INFRA_NR; i++) {
+ if (infra_clk_data->clks[i] == ERR_PTR(-EPROBE_DEFER))
+ infra_clk_data->clks[i] = ERR_PTR(-ENOENT);
+ }
+ }
+
+ mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
+ infra_clk_data);
+ mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
+ infra_clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, infra_clk_data);
+
+ return r;
+}
+
+static const struct mtk_gate_regs peri0_cg_regs = {
+ .set_ofs = 0x0008,
+ .clr_ofs = 0x0010,
+ .sta_ofs = 0x0018,
+};
+
+static const struct mtk_gate_regs peri1_cg_regs = {
+ .set_ofs = 0x000c,
+ .clr_ofs = 0x0014,
+ .sta_ofs = 0x001c,
+};
+
+#define GATE_PERI0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_PERI1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate peri_clks[] = {
+ GATE_PERI0(CLK_PERI_USB0_MCU, "usb0_mcu_ck", "axi_sel", 31),
+ GATE_PERI0(CLK_PERI_ETH, "eth_ck", "clk26m", 30),
+ GATE_PERI0(CLK_PERI_SPI0, "spi0_ck", "spi0_sel", 29),
+ GATE_PERI0(CLK_PERI_AUXADC, "auxadc_ck", "clk26m", 28),
+ GATE_PERI0(CLK_PERI_I2C3, "i2c3_ck", "clk26m", 27),
+ GATE_PERI0(CLK_PERI_I2C2, "i2c2_ck", "axi_sel", 26),
+ GATE_PERI0(CLK_PERI_I2C1, "i2c1_ck", "axi_sel", 25),
+ GATE_PERI0(CLK_PERI_I2C0, "i2c0_ck", "axi_sel", 24),
+ GATE_PERI0(CLK_PERI_BTIF, "bitif_ck", "axi_sel", 23),
+ GATE_PERI0(CLK_PERI_UART3, "uart3_ck", "axi_sel", 22),
+ GATE_PERI0(CLK_PERI_UART2, "uart2_ck", "axi_sel", 21),
+ GATE_PERI0(CLK_PERI_UART1, "uart1_ck", "axi_sel", 20),
+ GATE_PERI0(CLK_PERI_UART0, "uart0_ck", "axi_sel", 19),
+ GATE_PERI0(CLK_PERI_NLI, "nli_ck", "axi_sel", 18),
+ GATE_PERI0(CLK_PERI_MSDC50_3, "msdc50_3_ck", "emmc_hclk_sel", 17),
+ GATE_PERI0(CLK_PERI_MSDC30_3, "msdc30_3_ck", "msdc30_3_sel", 16),
+ GATE_PERI0(CLK_PERI_MSDC30_2, "msdc30_2_ck", "msdc30_2_sel", 15),
+ GATE_PERI0(CLK_PERI_MSDC30_1, "msdc30_1_ck", "msdc30_1_sel", 14),
+ GATE_PERI0(CLK_PERI_MSDC30_0, "msdc30_0_ck", "msdc30_0_sel", 13),
+ GATE_PERI0(CLK_PERI_AP_DMA, "ap_dma_ck", "axi_sel", 12),
+ GATE_PERI0(CLK_PERI_USB1, "usb1_ck", "usb20_sel", 11),
+ GATE_PERI0(CLK_PERI_USB0, "usb0_ck", "usb20_sel", 10),
+ GATE_PERI0(CLK_PERI_PWM, "pwm_ck", "axi_sel", 9),
+ GATE_PERI0(CLK_PERI_PWM7, "pwm7_ck", "axi_sel", 8),
+ GATE_PERI0(CLK_PERI_PWM6, "pwm6_ck", "axi_sel", 7),
+ GATE_PERI0(CLK_PERI_PWM5, "pwm5_ck", "axi_sel", 6),
+ GATE_PERI0(CLK_PERI_PWM4, "pwm4_ck", "axi_sel", 5),
+ GATE_PERI0(CLK_PERI_PWM3, "pwm3_ck", "axi_sel", 4),
+ GATE_PERI0(CLK_PERI_PWM2, "pwm2_ck", "axi_sel", 3),
+ GATE_PERI0(CLK_PERI_PWM1, "pwm1_ck", "axi_sel", 2),
+ GATE_PERI0(CLK_PERI_THERM, "therm_ck", "axi_sel", 1),
+ GATE_PERI0(CLK_PERI_NFI, "nfi_ck", "nfi2x_sel", 0),
+
+ GATE_PERI1(CLK_PERI_FCI, "fci_ck", "ms_card_sel", 11),
+ GATE_PERI1(CLK_PERI_SPI2, "spi2_ck", "spi2_sel", 10),
+ GATE_PERI1(CLK_PERI_SPI1, "spi1_ck", "spi1_sel", 9),
+ GATE_PERI1(CLK_PERI_HOST89_DVD, "host89_dvd_ck", "aud2dvd_sel", 8),
+ GATE_PERI1(CLK_PERI_HOST89_SPI, "host89_spi_ck", "spi0_sel", 7),
+ GATE_PERI1(CLK_PERI_HOST89_INT, "host89_int_ck", "axi_sel", 6),
+ GATE_PERI1(CLK_PERI_FLASH, "flash_ck", "nfi2x_sel", 5),
+ GATE_PERI1(CLK_PERI_NFI_PAD, "nfi_pad_ck", "nfi1x_pad", 4),
+ GATE_PERI1(CLK_PERI_NFI_ECC, "nfi_ecc_ck", "nfi1x_pad", 3),
+ GATE_PERI1(CLK_PERI_GCPU, "gcpu_ck", "axi_sel", 2),
+ GATE_PERI1(CLK_PERI_USB_SLV, "usbslv_ck", "axi_sel", 1),
+ GATE_PERI1(CLK_PERI_USB1_MCU, "usb1_mcu_ck", "axi_sel", 0),
+};
+
+static const char * const uart_ck_sel_parents[] = {
+ "clk26m",
+ "uart_sel",
+};
+
+static const struct mtk_composite peri_muxs[] = {
+ MUX(CLK_PERI_UART0_SEL, "uart0_ck_sel", uart_ck_sel_parents,
+ 0x40c, 0, 1),
+ MUX(CLK_PERI_UART1_SEL, "uart1_ck_sel", uart_ck_sel_parents,
+ 0x40c, 1, 1),
+ MUX(CLK_PERI_UART2_SEL, "uart2_ck_sel", uart_ck_sel_parents,
+ 0x40c, 2, 1),
+ MUX(CLK_PERI_UART3_SEL, "uart3_ck_sel", uart_ck_sel_parents,
+ 0x40c, 3, 1),
+};
+
+static int mtk_pericfg_init(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ void __iomem *base;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ base = devm_of_iomap(&pdev->dev, 0);
+ if (!base)
+ return -ENOMEM;
+
+ clk_data = mtk_alloc_clk_data(CLK_PERI_NR);
+
+ mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
+ clk_data);
+
+ mtk_clk_register_composites(peri_muxs, ARRAY_SIZE(peri_muxs), base,
+ &lock, clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return r;
+}
+
+#define MT8590_PLL_FMAX (2000 * MHZ)
+#define CON0_MT8590_RST_BAR BIT(27)
+
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, \
+ _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift) { \
+ .id = _id, \
+ .name = _name, \
+ .reg = _reg, \
+ .pwr_reg = _pwr_reg, \
+ .en_mask = _en_mask, \
+ .flags = _flags, \
+ .rst_bar_mask = CON0_MT8590_RST_BAR, \
+ .fmax = MT8590_PLL_FMAX, \
+ .pcwbits = _pcwbits, \
+ .pd_reg = _pd_reg, \
+ .pd_shift = _pd_shift, \
+ .tuner_reg = _tuner_reg, \
+ .pcw_reg = _pcw_reg, \
+ .pcw_shift = _pcw_shift, \
+ }
+
+static const struct mtk_pll_data apmixed_plls[] = {
+ PLL(CLK_APMIXED_ARMPLL, "armpll", 0x200, 0x20c, 0x80000001,
+ PLL_AO, 21, 0x204, 24, 0x0, 0x204, 0),
+ PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x210, 0x21c, 0xf0000001,
+ HAVE_RST_BAR, 21, 0x210, 4, 0x0, 0x214, 0),
+ PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x220, 0x22c, 0xf3000001,
+ HAVE_RST_BAR, 7, 0x220, 4, 0x0, 0x224, 14),
+ PLL(CLK_APMIXED_MMPLL, "mmpll", 0x230, 0x23c, 0x00000001, 0,
+ 21, 0x230, 4, 0x0, 0x234, 0),
+ PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x240, 0x24c, 0x00000001, 0,
+ 21, 0x240, 4, 0x0, 0x244, 0),
+ PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x250, 0x25c, 0x00000001, 0,
+ 21, 0x250, 4, 0x0, 0x254, 0),
+ PLL(CLK_APMIXED_AUD1PLL, "aud1pll", 0x270, 0x27c, 0x00000001, 0,
+ 31, 0x270, 4, 0x0, 0x274, 0),
+ PLL(CLK_APMIXED_TRGPLL, "trgpll", 0x280, 0x28c, 0x00000001, 0,
+ 31, 0x280, 4, 0x0, 0x284, 0),
+ PLL(CLK_APMIXED_ETHPLL, "ethpll", 0x290, 0x29c, 0x00000001, 0,
+ 31, 0x290, 4, 0x0, 0x294, 0),
+ PLL(CLK_APMIXED_VDECPLL, "vdecpll", 0x2a0, 0x2ac, 0x00000001, 0,
+ 31, 0x2a0, 4, 0x0, 0x2a4, 0),
+ PLL(CLK_APMIXED_HADDS2PLL, "hadds2pll", 0x2b0, 0x2bc, 0x00000001, 0,
+ 31, 0x2b0, 4, 0x0, 0x2b4, 0),
+ PLL(CLK_APMIXED_AUD2PLL, "aud2pll", 0x2c0, 0x2cc, 0x00000001, 0,
+ 31, 0x2c0, 4, 0x0, 0x2c4, 0),
+ PLL(CLK_APMIXED_TVD2PLL, "tvd2pll", 0x2d0, 0x2dc, 0x00000001, 0,
+ 21, 0x2d0, 4, 0x0, 0x2d4, 0),
+};
+
+static int mtk_apmixedsys_init(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR);
+ if (!clk_data)
+ return -ENOMEM;
+
+ mtk_clk_register_plls(node, apmixed_plls, ARRAY_SIZE(apmixed_plls),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt2701[] = {
+ {
+ .compatible = "mediatek,mt2701-topckgen",
+ .data = mtk_topckgen_init,
+ }, {
+ .compatible = "mediatek,mt2701-infracfg",
+ .data = mtk_infrasys_init,
+ }, {
+ .compatible = "mediatek,mt2701-pericfg",
+ .data = mtk_pericfg_init,
+ }, {
+ .compatible = "mediatek,mt2701-apmixedsys",
+ .data = mtk_apmixedsys_init,
+ }, {
+ /* sentinel */
+ }
+};
+
+static int clk_mt2701_probe(struct platform_device *pdev)
+{
+ int (*clk_init)(struct platform_device *);
+ int r;
+
+ clk_init = of_device_get_match_data(&pdev->dev);
+ if (!clk_init)
+ return -EINVAL;
+
+ r = clk_init(pdev);
+ if (r) {
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+ }
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_drv = {
+ .probe = clk_mt2701_probe,
+ .driver = {
+ .name = "clk-mt2701",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_clk_mt2701,
+ },
+};
+
+static int __init clk_mt2701_init(void)
+{
+ return platform_driver_register(&clk_mt2701_drv);
+}
+
+arch_initcall(clk_mt2701_init);
diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c
index bb30f70..0541df7 100644
--- a/drivers/clk/mediatek/clk-mtk.c
+++ b/drivers/clk/mediatek/clk-mtk.c
@@ -58,6 +58,9 @@ void mtk_clk_register_fixed_clks(const struct mtk_fixed_clk *clks,
for (i = 0; i < num; i++) {
const struct mtk_fixed_clk *rc = &clks[i];
+ if (clk_data && !IS_ERR_OR_NULL(clk_data->clks[rc->id]))
+ continue;
+
clk = clk_register_fixed_rate(NULL, rc->name, rc->parent, 0,
rc->rate);
@@ -81,6 +84,9 @@ void mtk_clk_register_factors(const struct mtk_fixed_factor *clks,
for (i = 0; i < num; i++) {
const struct mtk_fixed_factor *ff = &clks[i];
+ if (clk_data && !IS_ERR_OR_NULL(clk_data->clks[ff->id]))
+ continue;
+
clk = clk_register_fixed_factor(NULL, ff->name, ff->parent_name,
CLK_SET_RATE_PARENT, ff->mult, ff->div);
@@ -116,6 +122,9 @@ int mtk_clk_register_gates(struct device_node *node,
for (i = 0; i < num; i++) {
const struct mtk_gate *gate = &clks[i];
+ if (!IS_ERR_OR_NULL(clk_data->clks[gate->id]))
+ continue;
+
clk = mtk_clk_register_gate(gate->name, gate->parent_name,
regmap,
gate->regs->set_ofs,
@@ -232,6 +241,9 @@ void mtk_clk_register_composites(const struct mtk_composite *mcs,
for (i = 0; i < num; i++) {
const struct mtk_composite *mc = &mcs[i];
+ if (clk_data && !IS_ERR_OR_NULL(clk_data->clks[mc->id]))
+ continue;
+
clk = mtk_clk_register_composite(mc, base, lock);
if (IS_ERR(clk)) {
@@ -244,3 +256,31 @@ void mtk_clk_register_composites(const struct mtk_composite *mcs,
clk_data->clks[mc->id] = clk;
}
}
+
+void mtk_clk_register_dividers(const struct mtk_clk_divider *mcds,
+ int num, void __iomem *base, spinlock_t *lock,
+ struct clk_onecell_data *clk_data)
+{
+ struct clk *clk;
+ int i;
+
+ for (i = 0; i < num; i++) {
+ const struct mtk_clk_divider *mcd = &mcds[i];
+
+ if (clk_data && !IS_ERR_OR_NULL(clk_data->clks[mcd->id]))
+ continue;
+
+ clk = clk_register_divider(NULL, mcd->name, mcd->parent_name,
+ mcd->flags, base + mcd->div_reg, mcd->div_shift,
+ mcd->div_width, mcd->clk_divider_flags, lock);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ mcd->name, PTR_ERR(clk));
+ continue;
+ }
+
+ if (clk_data)
+ clk_data->clks[mcd->id] = clk;
+ }
+}
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index 9f24fcf..f5d6b70 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -87,7 +87,8 @@ struct mtk_composite {
* In case the rate change propagation to parent clocks is undesirable,
* this macro allows to specify the clock flags manually.
*/
-#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, _flags) { \
+#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, \
+ _gate, _flags) { \
.id = _id, \
.name = _name, \
.mux_reg = _reg, \
@@ -106,7 +107,8 @@ struct mtk_composite {
* parent clock by default.
*/
#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) \
- MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, CLK_SET_RATE_PARENT)
+ MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, \
+ _gate, CLK_SET_RATE_PARENT)
#define MUX(_id, _name, _parents, _reg, _shift, _width) { \
.id = _id, \
@@ -121,7 +123,8 @@ struct mtk_composite {
.flags = CLK_SET_RATE_PARENT, \
}
-#define DIV_GATE(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, _div_width, _div_shift) { \
+#define DIV_GATE(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, \
+ _div_width, _div_shift) { \
.id = _id, \
.parent = _parent, \
.name = _name, \
@@ -156,12 +159,40 @@ struct mtk_gate {
const struct clk_ops *ops;
};
-int mtk_clk_register_gates(struct device_node *node, const struct mtk_gate *clks,
- int num, struct clk_onecell_data *clk_data);
+int mtk_clk_register_gates(struct device_node *node,
+ const struct mtk_gate *clks, int num,
+ struct clk_onecell_data *clk_data);
+
+struct mtk_clk_divider {
+ int id;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+
+ u32 div_reg;
+ unsigned char div_shift;
+ unsigned char div_width;
+ unsigned char clk_divider_flags;
+ const struct clk_div_table *clk_div_table;
+};
+
+#define DIV_ADJ(_id, _name, _parent, _reg, _shift, _width) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .div_reg = _reg, \
+ .div_shift = _shift, \
+ .div_width = _width, \
+}
+
+void mtk_clk_register_dividers(const struct mtk_clk_divider *mcds,
+ int num, void __iomem *base, spinlock_t *lock,
+ struct clk_onecell_data *clk_data);
struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num);
#define HAVE_RST_BAR BIT(0)
+#define PLL_AO BIT(1)
struct mtk_pll_div_table {
u32 div;
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index 0c2deac..a409142 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -301,6 +301,7 @@ static struct clk *mtk_clk_register_pll(const struct mtk_pll_data *data,
pll->data = data;
init.name = data->name;
+ init.flags = (data->flags & PLL_AO) ? CLK_IS_CRITICAL : 0;
init.ops = &mtk_pll_ops;
init.parent_names = &parent_name;
init.num_parents = 1;
--
1.9.1
^ permalink raw reply related
* [PATCH v13 0/4] Add clock support for Mediatek MT2701
From: Erin Lo @ 2016-09-26 9:26 UTC (permalink / raw)
To: Matthias Brugger, Mike Turquette, Stephen Boyd, Rob Herring
Cc: Arnd Bergmann, Sascha Hauer, Daniel Kurtz, Philipp Zabel,
devicetree, linux-arm-kernel, linux-kernel, linux-mediatek,
linux-clk, srv_heupstream, ms.chen, robert.chou
This series is based on clk-next, add clock and reset controller support
for Mediatek MT2701.
Since some patches in v11 had been applied into clk-next, they were not
included in v13 series.
changes since v12:
- Rebase to clk-next.
- Use CLK_OF_DECLARE_DRIVER() instead of CLK_OF_DECLARE().
- Use dev_* and devm_* APIs instead of pr_* and ioremap().
- Refine init functions. Share error messages in common probe().
- Fix null pointer checking for clk_data.
changes since v11:
- Rebase to clk-next.
- Return error code from probe() if clock registration fail.
changes since v10:
- Remove COMMON_CLK dependency from clk/mediatek/Kconfig.
changes since v9:
- Rebase to v4.8-rc1.
- Drop a fix patch of parent clock initial state. It will be replaced by a new
patch from Mike/Stephen.
- Replace clk.h with clk-provider.h.
- Correct register settings of clocks.
changes since v8:
- Rebase to v4.7-rc1.
- Include mt2701-resets.h in mt2701.dtsi.
- Remove an unused property from apmixedsys DT node.
changes since v7:
- Rebase to clk-next.
- Implement subsystem clocks in seperated files.
- Replace critical clock enabling with CLK_IS_CRITICAL flag.
- Reduce most clock registrations in CLK_OF_DECLARE().
- Remove __init and __initconst from most init fucntions and data,
and replace driver registration with platform_driver_register().
- Replace some common function or variable names with unique names.
- Use real clock for UARTs.
changes since v6:
- Rebase to v4.6-rc1.
- Register subsystem clocks in probe() instead of CLK_OF_DECLARE().
- Add clocks that referred by subsystem clocks.
- Fix clk_data size of apmixedsys.
- Add config options for each subsystem clock provider.
changes since v5:
- Rebase to v4.5-rc1 and [1].
- Enable critical clocks for MT2701
- Refine dt-binding documents, add reset controller support for hifsys.
changes since v4:
- Rebase to v4.5-rc1.
- Remove CLK_SET_RATE_PARENT from divider flags.
- Add img_jpgdec_smi clock.
- Move clk/mediatek/Kconfig into menu section in clk/Kconfig.
changes since v3:
- Change the parent of mm_mdp_bls_26m from clk26m to pwm_sel.
changes since v2:
- Fix ethsys definition.
- Replace read-modify-write with regmap_update_bits() in clock operations.
- Move mt2701-resets.h to include/dt-bindings/reset/.
- Add hifsys reset patch from John Crispin.
changes since v1:
- Document MT2701 compatible strings.
[1] https://patchwork.kernel.org/patch/8147901/
Erin Lo (1):
arm: dts: mt2701: Use real clock for UARTs
James Liao (1):
arm: dts: mt2701: Add clock controller device nodes
Shunli Wang (2):
clk: mediatek: Add MT2701 clock support
reset: mediatek: Add MT2701 reset driver
arch/arm/boot/dts/mt2701.dtsi | 50 +-
drivers/clk/mediatek/Kconfig | 43 ++
drivers/clk/mediatek/Makefile | 7 +
drivers/clk/mediatek/clk-gate.c | 52 ++
drivers/clk/mediatek/clk-gate.h | 2 +
drivers/clk/mediatek/clk-mt2701-bdp.c | 148 +++++
drivers/clk/mediatek/clk-mt2701-eth.c | 90 +++
drivers/clk/mediatek/clk-mt2701-hif.c | 91 +++
drivers/clk/mediatek/clk-mt2701-img.c | 90 +++
drivers/clk/mediatek/clk-mt2701-mm.c | 133 ++++
drivers/clk/mediatek/clk-mt2701-vdec.c | 101 +++
drivers/clk/mediatek/clk-mt2701.c | 1054 ++++++++++++++++++++++++++++++++
drivers/clk/mediatek/clk-mtk.c | 40 ++
drivers/clk/mediatek/clk-mtk.h | 41 +-
drivers/clk/mediatek/clk-pll.c | 1 +
15 files changed, 1933 insertions(+), 10 deletions(-)
create mode 100644 drivers/clk/mediatek/clk-mt2701-bdp.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-eth.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-hif.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-img.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-mm.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-vdec.c
create mode 100644 drivers/clk/mediatek/clk-mt2701.c
--
1.9.1
^ permalink raw reply
* [PATCH net-next 2/2] net: ethernet: mediatek: bug fix to disable HW LRO
From: Nelson Chang @ 2016-09-26 6:33 UTC (permalink / raw)
To: john-Pj+rj9U5foFAfugRpC6u6w, davem-fT/PcQaiUtIeIZ0/mPfg9Q
Cc: netdev-u79uwXL29TY76Z2rM5mHXA, nbd-p3rKhJxN3npAfugRpC6u6w,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
nelsonch.tw-Re5JQEeQqe8AvxtiuMwx3w, Nelson Chang
In-Reply-To: <1474871630-4134-1-git-send-email-nelson.chang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
(1) Modify the register settings for LRO relinquishments
(2) Jump out from the waiting loop while LRO relinquishments are done
Signed-off-by: Nelson Chang <nelson.chang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 +
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++--
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 62de68d..ddf20a0 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1374,6 +1374,7 @@ static void mtk_hwlro_rx_uninit(struct mtk_eth *eth)
msleep(20);
continue;
}
+ break;
}
/* invalidate lro rings */
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 7e194f7..3003195 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -102,8 +102,8 @@
#define MTK_LRO_EN BIT(0)
#define MTK_L3_CKS_UPD_EN BIT(7)
#define MTK_LRO_ALT_PKT_CNT_MODE BIT(21)
-#define MTK_LRO_RING_RELINQUISH_REQ (0x3 << 26)
-#define MTK_LRO_RING_RELINQUISH_DONE (0x3 << 29)
+#define MTK_LRO_RING_RELINQUISH_REQ (0x7 << 26)
+#define MTK_LRO_RING_RELINQUISH_DONE (0x7 << 29)
#define MTK_PDMA_LRO_CTRL_DW1 0x984
#define MTK_PDMA_LRO_CTRL_DW2 0x988
--
1.9.1
^ permalink raw reply related
* [PATCH net-next 1/2] net: ethernet: mediatek: add to stop PDMA while stopping the frame engine
From: Nelson Chang @ 2016-09-26 6:33 UTC (permalink / raw)
To: john, davem; +Cc: nbd, netdev, linux-mediatek, nelsonch.tw, Nelson Chang
In-Reply-To: <1474871630-4134-1-git-send-email-nelson.chang@mediatek.com>
Stop PDMA while the frame engine is going to stop.
Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 4cc50c0..62de68d 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1784,6 +1784,7 @@ static int mtk_stop(struct net_device *dev)
napi_disable(ð->rx_napi);
mtk_stop_dma(eth, MTK_QDMA_GLO_CFG);
+ mtk_stop_dma(eth, MTK_PDMA_GLO_CFG);
mtk_dma_free(eth);
--
1.9.1
^ permalink raw reply related
* [PATCH net-next 0/2] net: ethernet: mediatek: some bug fixes for PDAM and HW LRO
From: Nelson Chang @ 2016-09-26 6:33 UTC (permalink / raw)
To: john, davem; +Cc: nbd, netdev, linux-mediatek, nelsonch.tw, Nelson Chang
1) Add to stop PDMA while stopping the frame engine
2) Modify the register settings for LRO relinquishments
3) Jump out from the waiting loop while LRO relinquishments are done
Nelson Chang (2):
net: ethernet: mediatek: add to stop PDMA while stopping the frame
engine
net: ethernet: mediatek: bug fix to disable HW LRO
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 ++
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++--
2 files changed, 4 insertions(+), 2 deletions(-)
mode change 100644 => 100755 drivers/net/ethernet/mediatek/mtk_eth_soc.c
mode change 100644 => 100755 drivers/net/ethernet/mediatek/mtk_eth_soc.h
--
1.9.1
^ permalink raw reply
* [PATCH 2/2] drm/rockchip: mark symbols static where possible
From: Baoyou Xie @ 2016-09-25 7:43 UTC (permalink / raw)
To: ck.hu, p.zabel, airlied, matthias.bgg, mark.yao, heiko
Cc: dri-devel, linux-arm-kernel, linux-mediatek, linux-kernel,
linux-rockchip, arnd, baoyou.xie, xie.baoyou, han.fei,
tang.qiang007
We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/rockchip/rockchip_drm_drv.c:309:6: warning: no previous prototype for 'rockchip_drm_fb_suspend' [-Wmissing-prototypes]
drivers/gpu/drm/rockchip/rockchip_drm_drv.c:318:6: warning: no previous prototype for 'rockchip_drm_fb_resume' [-Wmissing-prototypes]
In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
---
drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index 76eaf1d..38c3be5 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -309,7 +309,7 @@ static struct drm_driver rockchip_drm_driver = {
};
#ifdef CONFIG_PM_SLEEP
-void rockchip_drm_fb_suspend(struct drm_device *drm)
+static void rockchip_drm_fb_suspend(struct drm_device *drm)
{
struct rockchip_drm_private *priv = drm->dev_private;
@@ -318,7 +318,7 @@ void rockchip_drm_fb_suspend(struct drm_device *drm)
console_unlock();
}
-void rockchip_drm_fb_resume(struct drm_device *drm)
+static void rockchip_drm_fb_resume(struct drm_device *drm)
{
struct rockchip_drm_private *priv = drm->dev_private;
--
2.7.4
^ permalink raw reply related
* [PATCH] drm/mediatek: mark symbols static where possible
From: Baoyou Xie @ 2016-09-25 7:41 UTC (permalink / raw)
To: ck.hu, p.zabel, airlied, matthias.bgg, mark.yao, heiko
Cc: dri-devel, linux-arm-kernel, linux-mediatek, linux-kernel,
linux-rockchip, arnd, baoyou.xie, xie.baoyou, han.fei,
tang.qiang007
We get 4 warnings when building kernel with W=1:
drivers/gpu/drm/mediatek/mtk_hdmi.c:1089:6: warning: no previous prototype for 'mtk_hdmi_audio_enable' [-Wmissing-prototypes]
drivers/gpu/drm/mediatek/mtk_hdmi.c:1095:6: warning: no previous prototype for 'mtk_hdmi_audio_disable' [-Wmissing-prototypes]
drivers/gpu/drm/mediatek/mtk_hdmi.c:1101:5: warning: no previous prototype for 'mtk_hdmi_audio_set_param' [-Wmissing-prototypes]
drivers/gpu/drm/mediatek/mtk_hdmi.c:1627:5: warning: no previous prototype for 'mtk_hdmi_audio_digital_mute' [-Wmissing-prototypes]
In fact, both functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks both functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
---
drivers/gpu/drm/mediatek/mtk_hdmi.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 334562d..be4e19c 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -1086,19 +1086,19 @@ static int mtk_hdmi_output_init(struct mtk_hdmi *hdmi)
return 0;
}
-void mtk_hdmi_audio_enable(struct mtk_hdmi *hdmi)
+static void mtk_hdmi_audio_enable(struct mtk_hdmi *hdmi)
{
mtk_hdmi_aud_enable_packet(hdmi, true);
hdmi->audio_enable = true;
}
-void mtk_hdmi_audio_disable(struct mtk_hdmi *hdmi)
+static void mtk_hdmi_audio_disable(struct mtk_hdmi *hdmi)
{
mtk_hdmi_aud_enable_packet(hdmi, false);
hdmi->audio_enable = false;
}
-int mtk_hdmi_audio_set_param(struct mtk_hdmi *hdmi,
+static int mtk_hdmi_audio_set_param(struct mtk_hdmi *hdmi,
struct hdmi_audio_param *param)
{
if (!hdmi->audio_enable) {
@@ -1624,7 +1624,8 @@ static void mtk_hdmi_audio_shutdown(struct device *dev, void *data)
mtk_hdmi_audio_disable(hdmi);
}
-int mtk_hdmi_audio_digital_mute(struct device *dev, void *data, bool enable)
+static int
+mtk_hdmi_audio_digital_mute(struct device *dev, void *data, bool enable)
{
struct mtk_hdmi *hdmi = dev_get_drvdata(dev);
--
2.7.4
^ permalink raw reply related
* [PATCH] drm/mediatek: mark symbols static where possible
From: Baoyou Xie @ 2016-09-25 7:38 UTC (permalink / raw)
To: ck.hu, p.zabel, airlied, matthias.bgg, mark.yao, heiko
Cc: dri-devel, linux-arm-kernel, linux-mediatek, linux-kernel,
linux-rockchip, arnd, baoyou.xie, xie.baoyou, han.fei,
tang.qiang007
In-Reply-To: <1474789109-22010-1-git-send-email-baoyou.xie@linaro.org>
We get 4 warnings when building kernel with W=1:
drivers/gpu/drm/mediatek/mtk_hdmi.c:1089:6: warning: no previous prototype for 'mtk_hdmi_audio_enable' [-Wmissing-prototypes]
drivers/gpu/drm/mediatek/mtk_hdmi.c:1095:6: warning: no previous prototype for 'mtk_hdmi_audio_disable' [-Wmissing-prototypes]
drivers/gpu/drm/mediatek/mtk_hdmi.c:1101:5: warning: no previous prototype for 'mtk_hdmi_audio_set_param' [-Wmissing-prototypes]
drivers/gpu/drm/mediatek/mtk_hdmi.c:1627:5: warning: no previous prototype for 'mtk_hdmi_audio_digital_mute' [-Wmissing-prototypes]
In fact, both functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks both functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
---
drivers/gpu/drm/mediatek/mtk_hdmi.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 334562d..be4e19c 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -1086,19 +1086,19 @@ static int mtk_hdmi_output_init(struct mtk_hdmi *hdmi)
return 0;
}
-void mtk_hdmi_audio_enable(struct mtk_hdmi *hdmi)
+static void mtk_hdmi_audio_enable(struct mtk_hdmi *hdmi)
{
mtk_hdmi_aud_enable_packet(hdmi, true);
hdmi->audio_enable = true;
}
-void mtk_hdmi_audio_disable(struct mtk_hdmi *hdmi)
+static void mtk_hdmi_audio_disable(struct mtk_hdmi *hdmi)
{
mtk_hdmi_aud_enable_packet(hdmi, false);
hdmi->audio_enable = false;
}
-int mtk_hdmi_audio_set_param(struct mtk_hdmi *hdmi,
+static int mtk_hdmi_audio_set_param(struct mtk_hdmi *hdmi,
struct hdmi_audio_param *param)
{
if (!hdmi->audio_enable) {
@@ -1624,7 +1624,8 @@ static void mtk_hdmi_audio_shutdown(struct device *dev, void *data)
mtk_hdmi_audio_disable(hdmi);
}
-int mtk_hdmi_audio_digital_mute(struct device *dev, void *data, bool enable)
+static int
+mtk_hdmi_audio_digital_mute(struct device *dev, void *data, bool enable)
{
struct mtk_hdmi *hdmi = dev_get_drvdata(dev);
--
2.7.4
^ permalink raw reply related
* [PATCH 1/2] drm/rockchip: add missing header dependencies
From: Baoyou Xie @ 2016-09-25 7:38 UTC (permalink / raw)
To: ck.hu, p.zabel, airlied, matthias.bgg, mark.yao, heiko
Cc: dri-devel, linux-arm-kernel, linux-mediatek, linux-kernel,
linux-rockchip, arnd, baoyou.xie, xie.baoyou, han.fei,
tang.qiang007
We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:130:5: warning: no previous prototype for 'rockchip_drm_fbdev_init' [-Wmissing-prototypes]
drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:173:6: warning: no previous prototype for 'rockchip_drm_fbdev_fini' [-Wmissing-prototypes]
In fact, these functions are declared
in drivers/gpu/drm/rockchip/rockchip_drm_fbdev.h,
so this patch adds missing header dependencies.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
---
drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c b/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c
index 207e01d..a16c69f 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c
@@ -20,6 +20,7 @@
#include "rockchip_drm_drv.h"
#include "rockchip_drm_gem.h"
#include "rockchip_drm_fb.h"
+#include "rockchip_drm_fbdev.h"
#define PREFERRED_BPP 32
#define to_drm_private(x) \
--
2.7.4
^ permalink raw reply related
* Re: [PATCH net-next] Documentation: devicetree: fix typo in MediaTek ethernet device-tree binding
From: David Miller @ 2016-09-24 12:26 UTC (permalink / raw)
To: sean.wang-NuS5LvNUpcJWk0Htik3J/w
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, nbd-p3rKhJxN3npAfugRpC6u6w,
keyhaede-Re5JQEeQqe8AvxtiuMwx3w,
sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
objelf-Re5JQEeQqe8AvxtiuMwx3w,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
john-Pj+rj9U5foFAfugRpC6u6w
In-Reply-To: <1474610972-14974-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Date: Fri, 23 Sep 2016 14:09:32 +0800
> From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>
> fix typo in
> Documentation/devicetree/bindings/net/mediatek-net.txt
>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Reported-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Applied.
^ permalink raw reply
* Re: [PATCH net-next v2] Documentation: devicetree: revise ethernet device-tree binding about TRGMII
From: David Miller @ 2016-09-24 12:26 UTC (permalink / raw)
To: sean.wang
Cc: sergei.shtylyov, nbd, netdev, linux-kernel, devicetree,
linux-mediatek, john, keyhaede, objelf
In-Reply-To: <1474610649-18582-1-git-send-email-sean.wang@mediatek.com>
From: <sean.wang@mediatek.com>
Date: Fri, 23 Sep 2016 14:04:09 +0800
> From: Sean Wang <sean.wang@mediatek.com>
>
> add phy-mode "trgmii" to
> Documentation/devicetree/bindings/net/ethernet.txt
>
> Cc: devicetree@vger.kernel.org
> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Applied.
^ permalink raw reply
* Re: [PATCH net-next] Documentation: devicetree: fix typo in MediaTek ethernet device-tree binding
From: Rob Herring @ 2016-09-23 21:48 UTC (permalink / raw)
To: sean.wang
Cc: davem, sergei.shtylyov, nbd, netdev, linux-kernel, devicetree,
linux-mediatek, john, keyhaede, objelf
In-Reply-To: <1474610972-14974-1-git-send-email-sean.wang@mediatek.com>
On Fri, Sep 23, 2016 at 02:09:32PM +0800, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> fix typo in
> Documentation/devicetree/bindings/net/mediatek-net.txt
>
> Cc: devicetree@vger.kernel.org
> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
> Documentation/devicetree/bindings/net/mediatek-net.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply
* Re: [PATCH net-next v2] Documentation: devicetree: revise ethernet device-tree binding about TRGMII
From: Rob Herring @ 2016-09-23 21:48 UTC (permalink / raw)
To: sean.wang-NuS5LvNUpcJWk0Htik3J/w
Cc: davem-fT/PcQaiUtIeIZ0/mPfg9Q,
sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8,
nbd-p3rKhJxN3npAfugRpC6u6w, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
john-Pj+rj9U5foFAfugRpC6u6w, keyhaede-Re5JQEeQqe8AvxtiuMwx3w,
objelf-Re5JQEeQqe8AvxtiuMwx3w
In-Reply-To: <1474610649-18582-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
On Fri, Sep 23, 2016 at 02:04:09PM +0800, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>
> add phy-mode "trgmii" to
> Documentation/devicetree/bindings/net/ethernet.txt
>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Reported-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
> Documentation/devicetree/bindings/net/ethernet.txt | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH] [media] VPU: mediatek: Fix return value in case of error
From: Christophe JAILLET @ 2016-09-23 21:19 UTC (permalink / raw)
To: mchehab, matthias.bgg
Cc: linux-media, linux-arm-kernel, linux-mediatek, linux-kernel,
kernel-janitors, Christophe JAILLET
If 'dma_alloc_coherent()' returns NULL, 'vpu_alloc_ext_mem()' will
return 0 which means success.
Return -ENOMEM instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
drivers/media/platform/mtk-vpu/mtk_vpu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/mtk-vpu/mtk_vpu.c b/drivers/media/platform/mtk-vpu/mtk_vpu.c
index c9bf58c97878..3edb5ed852e6 100644
--- a/drivers/media/platform/mtk-vpu/mtk_vpu.c
+++ b/drivers/media/platform/mtk-vpu/mtk_vpu.c
@@ -674,7 +674,7 @@ static int vpu_alloc_ext_mem(struct mtk_vpu *vpu, u32 fw_type)
GFP_KERNEL);
if (!vpu->extmem[fw_type].va) {
dev_err(dev, "Failed to allocate the extended program memory\n");
- return PTR_ERR(vpu->extmem[fw_type].va);
+ return -ENOMEM;
}
/* Disable extend0. Enable extend1 */
--
2.7.4
^ permalink raw reply related
* Re: [DTSpec PATCH] Document additional "phy-connection-type" values
From: Grant Likely @ 2016-09-23 10:34 UTC (permalink / raw)
To: sean.wang-NuS5LvNUpcJWk0Htik3J/w
Cc: Florian Fainelli, devicetree-spec-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In-Reply-To: <1474613260-15457-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
On Fri, Sep 23, 2016 at 7:47 AM, <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
> From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>
> Add the following values to the "phy-connection-type" property:
>
> * Turbo Reduced Gigabit Media Independent Interface ``trgmii``
>
> Suggested-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Applied, thanks.
g.
> ---
> source/device-bindings.rst | 39 ++++++++++++++++++++-------------------
> 1 file changed, 20 insertions(+), 19 deletions(-)
>
> diff --git a/source/device-bindings.rst b/source/device-bindings.rst
> index 7020267..9de6f3c 100644
> --- a/source/device-bindings.rst
> +++ b/source/device-bindings.rst
> @@ -332,25 +332,26 @@ the network device class.
> .. tabularcolumns:: | l J |
> .. table:: Defined values for the ``phy-connection-type`` Property
>
> - =============================================== ============
> - Connection type Value
> - =============================================== ============
> - Media Independent Interface ``mii``
> - Reduced Media Independent Interface ``rmii``
> - Gigabit Media Independent Interface ``gmii``
> - Reduced Gigabit Media Independent ``rgmii``
> - rgmii with internal delay ``rgmii-id``
> - rgmii with internal delay on TX only ``rgmii-txid``
> - rgmii with internal delay on RX only ``rgmii-rxid``
> - Ten Bit Interface ``tbi``
> - Reduced Ten Bit Interface ``rtbi``
> - Serial Media Independent Interface ``smii``
> - Serial Gigabit Media Independent Interface ``sgmii``
> - Reverse Media Independent Interface ``rev-mii``
> - 10 Gigabits Media Independent Interface ``xgmii``
> - Multimedia over Coaxial ``moca``
> - Quad Serial Gigabit Media Independent Interface ``qsgmii``
> - =============================================== ============
> + ================================================= ============
> + Connection type Value
> + ================================================= ============
> + Media Independent Interface ``mii``
> + Reduced Media Independent Interface ``rmii``
> + Gigabit Media Independent Interface ``gmii``
> + Reduced Gigabit Media Independent ``rgmii``
> + rgmii with internal delay ``rgmii-id``
> + rgmii with internal delay on TX only ``rgmii-txid``
> + rgmii with internal delay on RX only ``rgmii-rxid``
> + Ten Bit Interface ``tbi``
> + Reduced Ten Bit Interface ``rtbi``
> + Serial Media Independent Interface ``smii``
> + Serial Gigabit Media Independent Interface ``sgmii``
> + Reverse Media Independent Interface ``rev-mii``
> + 10 Gigabits Media Independent Interface ``xgmii``
> + Multimedia over Coaxial ``moca``
> + Quad Serial Gigabit Media Independent Interface ``qsgmii``
> + Turbo Reduced Gigabit Media Independent Interface ``trgmii``
> + ================================================= ============
>
> ``phy-handle`` Property
> ^^^^^^^^^^^^^^^^^^^^^^^
> --
> 1.7.9.5
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox