* [PATCH 1/2] Add crypto driver support for some MediaTek chips
From: Ryder Lee @ 2016-12-02 3:26 UTC (permalink / raw)
To: Herbert Xu, David S. Miller, Matthias Brugger
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-crypto-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Sean Wang,
Ryder Lee
In-Reply-To: <1480649205-52695-1-git-send-email-ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
This adds support for the MediaTek hardware accelerator on
mt7623/mt2701/mt8521p SoC.
This driver currently implement:
- SHA1 and SHA2 family(HMAC) hash alogrithms.
- AES block cipher in CBC/ECB mode with 128/196/256 bits keys.
Signed-off-by: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
drivers/crypto/Kconfig | 17 +
drivers/crypto/Makefile | 1 +
drivers/crypto/mediatek/Makefile | 2 +
drivers/crypto/mediatek/mtk-aes.c | 734 +++++++++++++++++
drivers/crypto/mediatek/mtk-platform.c | 575 +++++++++++++
drivers/crypto/mediatek/mtk-platform.h | 230 ++++++
drivers/crypto/mediatek/mtk-regs.h | 194 +++++
drivers/crypto/mediatek/mtk-sha.c | 1384 ++++++++++++++++++++++++++++++++
8 files changed, 3137 insertions(+)
create mode 100644 drivers/crypto/mediatek/Makefile
create mode 100644 drivers/crypto/mediatek/mtk-aes.c
create mode 100644 drivers/crypto/mediatek/mtk-platform.c
create mode 100644 drivers/crypto/mediatek/mtk-platform.h
create mode 100644 drivers/crypto/mediatek/mtk-regs.h
create mode 100644 drivers/crypto/mediatek/mtk-sha.c
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 4d2b81f..5d9c803 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -553,6 +553,23 @@ config CRYPTO_DEV_ROCKCHIP
This driver interfaces with the hardware crypto accelerator.
Supporting cbc/ecb chainmode, and aes/des/des3_ede cipher mode.
+config CRYPTO_DEV_MEDIATEK
+ tristate "MediaTek's Cryptographic Engine driver"
+ depends on ARM && ARCH_MEDIATEK
+ select NEON
+ select KERNEL_MODE_NEON
+ select ARM_CRYPTO
+ select CRYPTO_AES
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_SHA1_ARM_NEON
+ select CRYPTO_SHA256_ARM
+ select CRYPTO_SHA512_ARM
+ select CRYPTO_HMAC
+ help
+ This driver allows you to utilize the hardware crypto accelerator
+ which can be found on the MT7623 MT2701, MT8521p, etc ....
+ Select this if you want to use it for AES/SHA1/SHA2 algorithms.
+
source "drivers/crypto/chelsio/Kconfig"
endif # CRYPTO_HW
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index ad7250f..272b51a 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_CRYPTO_DEV_IMGTEC_HASH) += img-hash.o
obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
obj-$(CONFIG_CRYPTO_DEV_MV_CESA) += mv_cesa.o
obj-$(CONFIG_CRYPTO_DEV_MARVELL_CESA) += marvell/
+obj-$(CONFIG_CRYPTO_DEV_MEDIATEK) += mediatek/
obj-$(CONFIG_CRYPTO_DEV_MXS_DCP) += mxs-dcp.o
obj-$(CONFIG_CRYPTO_DEV_NIAGARA2) += n2_crypto.o
n2_crypto-y := n2_core.o n2_asm.o
diff --git a/drivers/crypto/mediatek/Makefile b/drivers/crypto/mediatek/Makefile
new file mode 100644
index 0000000..187be79
--- /dev/null
+++ b/drivers/crypto/mediatek/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_CRYPTO_DEV_MEDIATEK) += mtk-crypto.o
+mtk-crypto-objs:= mtk-platform.o mtk-aes.o mtk-sha.o
diff --git a/drivers/crypto/mediatek/mtk-aes.c b/drivers/crypto/mediatek/mtk-aes.c
new file mode 100644
index 0000000..feb0e57
--- /dev/null
+++ b/drivers/crypto/mediatek/mtk-aes.c
@@ -0,0 +1,734 @@
+/*
+ * Cryptographic API.
+ *
+ * Support for MediaTek AES hardware accelerator.
+ *
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Some ideas are from atmel-aes.c drivers.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/algapi.h>
+#include <crypto/aes.h>
+#include "mtk-platform.h"
+#include "mtk-regs.h"
+
+#define AES_QUEUE_LENGTH 512
+#define AES_BUFFER_ORDER 2
+#define AES_BUFFER_SIZE ((PAGE_SIZE << AES_BUFFER_ORDER) \
+ & ~(AES_BLOCK_SIZE - 1))
+
+/* AES command token */
+#define AES_CT_SIZE_ECB 2
+#define AES_CT_SIZE_CBC 3
+#define AES_CT_CTRL_HDR 0x00220000
+#define AES_COMMAND0 0x05000000
+#define AES_COMMAND1 0x2d060000
+#define AES_COMMAND2 0xe4a63806
+
+/* AES transform information */
+#define AES_TFM_ECB (0x0 << 0)
+#define AES_TFM_CBC (0x1 << 0)
+#define AES_TFM_DECRYPT (0x5 << 0)
+#define AES_TFM_ENCRYPT (0x4 << 0)
+#define AES_TFM_SIZE(x) ((x) << 8)
+#define AES_TFM_128BITS (0xb << 16)
+#define AES_TFM_192BITS (0xd << 16)
+#define AES_TFM_256BITS (0xf << 16)
+#define AES_TFM_FULL_IV (0xf << 5)
+
+/* AES flags */
+#define AES_FLAGS_MODE_MSK GENMASK(2, 0)
+#define AES_FLAGS_ECB BIT(0)
+#define AES_FLAGS_CBC BIT(1)
+#define AES_FLAGS_ENCRYPT BIT(2)
+#define AES_FLAGS_BUSY BIT(3)
+
+/* AES command token */
+struct mtk_aes_ct {
+ u32 ct_ctrl0;
+ u32 ct_ctrl1;
+ u32 ct_ctrl2;
+};
+
+/* AES transform info */
+struct mtk_aes_tfm {
+ u32 tfm_ctrl0;
+ u32 tfm_ctrl1;
+
+ /* keys and IVs */
+ u8 state[AES_KEYSIZE_256 + AES_BLOCK_SIZE] __aligned(sizeof(u32));
+};
+
+struct mtk_aes_info {
+ struct mtk_aes_ct ct;
+ struct mtk_aes_tfm tfm;
+};
+
+struct mtk_aes_reqctx {
+ u64 mode;
+};
+
+struct mtk_aes_ctx {
+ struct mtk_cryp *cryp;
+ struct mtk_aes_info info;
+ u32 keylen;
+
+ unsigned long flags;
+};
+
+struct mtk_aes_drv {
+ struct list_head dev_list;
+ /* device list lock */
+ spinlock_t lock;
+};
+
+static struct mtk_aes_drv mtk_aes = {
+ .dev_list = LIST_HEAD_INIT(mtk_aes.dev_list),
+ .lock = __SPIN_LOCK_UNLOCKED(mtk_aes.lock),
+};
+
+static inline u32 mtk_aes_read(struct mtk_cryp *cryp, u32 offset)
+{
+ return readl_relaxed(cryp->base + offset);
+}
+
+static inline void mtk_aes_write(struct mtk_cryp *cryp,
+ u32 offset, u32 value)
+{
+ writel_relaxed(value, cryp->base + offset);
+}
+
+static struct mtk_cryp *mtk_aes_find_dev(struct mtk_aes_ctx *ctx)
+{
+ struct mtk_cryp *cryp = NULL;
+ struct mtk_cryp *tmp;
+
+ spin_lock_bh(&mtk_aes.lock);
+ if (!ctx->cryp) {
+ list_for_each_entry(tmp, &mtk_aes.dev_list, aes_list) {
+ cryp = tmp;
+ break;
+ }
+ ctx->cryp = cryp;
+ } else {
+ cryp = ctx->cryp;
+ }
+ spin_unlock_bh(&mtk_aes.lock);
+
+ return cryp;
+}
+
+static inline size_t mtk_aes_padlen(size_t len)
+{
+ len &= AES_BLOCK_SIZE - 1;
+ return len ? AES_BLOCK_SIZE - len : 0;
+}
+
+static bool mtk_aes_check_aligned(struct scatterlist *sg,
+ size_t len, struct mtk_aes_dma *dma)
+{
+ int nents;
+
+ if (!IS_ALIGNED(len, AES_BLOCK_SIZE))
+ return false;
+
+ for (nents = 0; sg; sg = sg_next(sg), ++nents) {
+ if (!IS_ALIGNED(sg->offset, sizeof(u32)))
+ return false;
+
+ if (len <= sg->length) {
+ if (!IS_ALIGNED(len, AES_BLOCK_SIZE))
+ return false;
+
+ dma->nents = nents + 1;
+ dma->remainder = sg->length - len;
+ sg->length = len;
+ return true;
+ }
+
+ if (!IS_ALIGNED(sg->length, AES_BLOCK_SIZE))
+ return false;
+
+ len -= sg->length;
+ }
+
+ return false;
+}
+
+static int mtk_aes_info_map(struct mtk_cryp *cryp,
+ struct mtk_aes *aes, size_t len)
+{
+ struct mtk_aes_ctx *ctx = crypto_ablkcipher_ctx(
+ crypto_ablkcipher_reqtfm(aes->req));
+ struct mtk_aes_info *info = aes->info;
+ struct mtk_aes_ct *ct = &info->ct;
+ struct mtk_aes_tfm *tfm = &info->tfm;
+ u32 keylen = ctx->keylen;
+
+ aes->ct_hdr = AES_CT_CTRL_HDR | len;
+ ct->ct_ctrl0 = AES_COMMAND0 | len;
+ ct->ct_ctrl1 = AES_COMMAND1;
+
+ if (aes->flags & AES_FLAGS_ENCRYPT)
+ tfm->tfm_ctrl0 = AES_TFM_ENCRYPT;
+ else
+ tfm->tfm_ctrl0 = AES_TFM_DECRYPT;
+
+ if (aes->flags & AES_FLAGS_CBC) {
+ aes->ct_size = AES_CT_SIZE_CBC;
+ ct->ct_ctrl2 = AES_COMMAND2;
+
+ tfm->tfm_ctrl0 |= AES_TFM_SIZE(WORD(keylen + AES_BLOCK_SIZE));
+ tfm->tfm_ctrl1 = AES_TFM_CBC;
+ tfm->tfm_ctrl1 |= AES_TFM_FULL_IV;
+
+ memcpy(tfm->state + keylen, aes->req->info, AES_BLOCK_SIZE);
+ } else if (aes->flags & AES_FLAGS_ECB) {
+ aes->ct_size = AES_CT_SIZE_ECB;
+ tfm->tfm_ctrl0 |= AES_TFM_SIZE(WORD(keylen));
+ tfm->tfm_ctrl1 = AES_TFM_ECB;
+ }
+
+ if (keylen == AES_KEYSIZE_128)
+ tfm->tfm_ctrl0 |= AES_TFM_128BITS;
+ else if (keylen == AES_KEYSIZE_256)
+ tfm->tfm_ctrl0 |= AES_TFM_256BITS;
+ else if (keylen == AES_KEYSIZE_192)
+ tfm->tfm_ctrl0 |= AES_TFM_192BITS;
+
+ aes->ct_dma = dma_map_single(cryp->dev, info, sizeof(*info),
+ DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(cryp->dev, aes->ct_dma))) {
+ dev_err(cryp->dev, "dma %d bytes error\n", sizeof(*info));
+ return -EINVAL;
+ }
+ aes->tfm_dma = aes->ct_dma + sizeof(*ct);
+
+ return 0;
+}
+
+static int mtk_aes_xmit(struct mtk_cryp *cryp, struct mtk_aes *aes)
+{
+ struct mtk_ring *ring = cryp->ring[aes->id];
+ struct mtk_desc *cmd = NULL, *res = NULL;
+ struct scatterlist *ssg, *dsg;
+ u32 len = aes->src.sg_len;
+ int nents;
+
+ for (nents = 0; nents < len; ++nents) {
+ ssg = &aes->src.sg[nents];
+ dsg = &aes->dst.sg[nents];
+
+ cmd = ring->cmd_base + ring->pos;
+ res = ring->res_base + ring->pos;
+
+ res->hdr = MTK_DESC_BUF_LEN(dsg->length);
+ res->buf = sg_dma_address(dsg);
+
+ cmd->hdr = MTK_DESC_BUF_LEN(ssg->length);
+ cmd->buf = sg_dma_address(ssg);
+
+ if (nents == 0) {
+ res->hdr |= MTK_DESC_FIRST;
+ cmd->hdr |= MTK_DESC_FIRST;
+ cmd->hdr |= MTK_DESC_CT_LEN(aes->ct_size);
+ cmd->ct = aes->ct_dma;
+ cmd->ct_hdr = aes->ct_hdr;
+ cmd->tfm = aes->tfm_dma;
+ }
+
+ if (++ring->pos == MTK_MAX_DESC_NUM)
+ ring->pos = 0;
+ }
+
+ cmd->hdr |= MTK_DESC_LAST;
+ res->hdr |= MTK_DESC_LAST;
+
+ /* make sure all descriptor are filled done */
+ wmb();
+ mtk_aes_write(cryp, RDR_PREP_COUNT(aes->id), MTK_DESC_CNT(len));
+ mtk_aes_write(cryp, CDR_PREP_COUNT(aes->id), MTK_DESC_CNT(len));
+
+ return -EINPROGRESS;
+}
+
+static inline void mtk_aes_restore_sg(const struct mtk_aes_dma *dma)
+{
+ struct scatterlist *sg = dma->sg;
+ int nents = dma->nents;
+
+ if (!dma->remainder)
+ return;
+
+ while (--nents > 0 && sg)
+ sg = sg_next(sg);
+
+ if (!sg)
+ return;
+
+ sg->length += dma->remainder;
+}
+
+static int mtk_aes_map(struct mtk_cryp *cryp, struct mtk_aes *aes)
+{
+ struct scatterlist *src = aes->req->src;
+ struct scatterlist *dst = aes->req->dst;
+ size_t len = aes->req->nbytes;
+ size_t padlen = 0;
+ bool src_aligned, dst_aligned;
+
+ aes->total = len;
+ aes->src.sg = src;
+ aes->dst.sg = dst;
+ aes->real_dst = dst;
+
+ src_aligned = mtk_aes_check_aligned(src, len, &aes->src);
+ if (src == dst)
+ dst_aligned = src_aligned;
+ else
+ dst_aligned = mtk_aes_check_aligned(dst, len, &aes->dst);
+
+ if (!src_aligned || !dst_aligned) {
+ padlen = mtk_aes_padlen(len);
+
+ if (len + padlen > AES_BUFFER_SIZE)
+ return -ENOMEM;
+
+ if (!src_aligned) {
+ sg_copy_to_buffer(src, sg_nents(src), aes->buf, len);
+ aes->src.sg = &aes->aligned_sg;
+ aes->src.nents = 1;
+ aes->src.remainder = 0;
+ }
+
+ if (!dst_aligned) {
+ aes->dst.sg = &aes->aligned_sg;
+ aes->dst.nents = 1;
+ aes->dst.remainder = 0;
+ }
+
+ sg_init_table(&aes->aligned_sg, 1);
+ sg_set_buf(&aes->aligned_sg, aes->buf, len + padlen);
+ }
+
+ if (aes->src.sg == aes->dst.sg) {
+ aes->src.sg_len = dma_map_sg(cryp->dev, aes->src.sg,
+ aes->src.nents, DMA_BIDIRECTIONAL);
+ aes->dst.sg_len = aes->src.sg_len;
+ if (unlikely(!aes->src.sg_len))
+ return -EFAULT;
+ } else {
+ aes->src.sg_len = dma_map_sg(cryp->dev, aes->src.sg,
+ aes->src.nents, DMA_TO_DEVICE);
+ if (unlikely(!aes->src.sg_len))
+ return -EFAULT;
+
+ aes->dst.sg_len = dma_map_sg(cryp->dev, aes->dst.sg,
+ aes->dst.nents, DMA_FROM_DEVICE);
+ if (unlikely(!aes->dst.sg_len)) {
+ dma_unmap_sg(cryp->dev, aes->src.sg,
+ aes->src.nents, DMA_TO_DEVICE);
+ return -EFAULT;
+ }
+ }
+
+ return mtk_aes_info_map(cryp, aes, len + padlen);
+}
+
+static int mtk_aes_handle_queue(struct mtk_cryp *cryp, u8 id,
+ struct ablkcipher_request *req)
+{
+ struct mtk_aes *aes = cryp->aes[id];
+ struct crypto_async_request *areq, *backlog;
+ struct mtk_aes_reqctx *rctx;
+ struct mtk_aes_ctx *ctx;
+ unsigned long flags;
+ int err, ret = 0;
+
+ spin_lock_irqsave(&aes->lock, flags);
+ if (req)
+ ret = ablkcipher_enqueue_request(&aes->queue, req);
+ if (aes->flags & AES_FLAGS_BUSY) {
+ spin_unlock_irqrestore(&aes->lock, flags);
+ return ret;
+ }
+ backlog = crypto_get_backlog(&aes->queue);
+ areq = crypto_dequeue_request(&aes->queue);
+ if (areq)
+ aes->flags |= AES_FLAGS_BUSY;
+ spin_unlock_irqrestore(&aes->lock, flags);
+
+ if (!areq)
+ return ret;
+
+ if (backlog)
+ backlog->complete(backlog, -EINPROGRESS);
+
+ req = ablkcipher_request_cast(areq);
+ ctx = crypto_ablkcipher_ctx(crypto_ablkcipher_reqtfm(req));
+ rctx = ablkcipher_request_ctx(req);
+ rctx->mode &= AES_FLAGS_MODE_MSK;
+ /* assign new request to device */
+ aes->req = req;
+ aes->info = &ctx->info;
+ aes->flags = (aes->flags & ~AES_FLAGS_MODE_MSK) | rctx->mode;
+
+ err = mtk_aes_map(cryp, aes);
+ if (err)
+ return err;
+
+ return mtk_aes_xmit(cryp, aes);
+}
+
+static void mtk_aes_unmap(struct mtk_cryp *cryp, struct mtk_aes *aes)
+{
+ dma_unmap_single(cryp->dev, aes->ct_dma,
+ sizeof(struct mtk_aes_info), DMA_TO_DEVICE);
+
+ if (aes->src.sg == aes->dst.sg) {
+ dma_unmap_sg(cryp->dev, aes->src.sg,
+ aes->src.nents, DMA_BIDIRECTIONAL);
+
+ if (aes->src.sg != &aes->aligned_sg)
+ mtk_aes_restore_sg(&aes->src);
+ } else {
+ dma_unmap_sg(cryp->dev, aes->dst.sg,
+ aes->dst.nents, DMA_FROM_DEVICE);
+
+ if (aes->dst.sg != &aes->aligned_sg)
+ mtk_aes_restore_sg(&aes->dst);
+
+ dma_unmap_sg(cryp->dev, aes->src.sg,
+ aes->src.nents, DMA_TO_DEVICE);
+
+ if (aes->src.sg != &aes->aligned_sg)
+ mtk_aes_restore_sg(&aes->src);
+ }
+
+ if (aes->dst.sg == &aes->aligned_sg)
+ sg_copy_from_buffer(aes->real_dst,
+ sg_nents(aes->real_dst),
+ aes->buf, aes->total);
+}
+
+static inline void mtk_aes_complete(struct mtk_cryp *cryp,
+ struct mtk_aes *aes)
+{
+ aes->flags &= ~AES_FLAGS_BUSY;
+
+ aes->req->base.complete(&aes->req->base, 0);
+
+ mtk_aes_handle_queue(cryp, aes->id, NULL);
+}
+
+static int mtk_aes_setkey(struct crypto_ablkcipher *tfm,
+ const u8 *key, u32 keylen)
+{
+ struct mtk_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+ u8 *state = ctx->info.tfm.state;
+
+ if (keylen != AES_KEYSIZE_128 &&
+ keylen != AES_KEYSIZE_192 &&
+ keylen != AES_KEYSIZE_256) {
+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+
+ ctx->keylen = keylen;
+ memcpy(state, key, keylen);
+
+ return 0;
+}
+
+static int mtk_aes_crypt(struct ablkcipher_request *req, u64 mode)
+{
+ struct mtk_aes_ctx *ctx = crypto_ablkcipher_ctx(
+ crypto_ablkcipher_reqtfm(req));
+ struct mtk_aes_reqctx *rctx = ablkcipher_request_ctx(req);
+
+ rctx->mode = mode;
+
+ return mtk_aes_handle_queue(ctx->cryp,
+ !(mode & AES_FLAGS_ENCRYPT), req);
+}
+
+static int mtk_ecb_encrypt(struct ablkcipher_request *req)
+{
+ return mtk_aes_crypt(req, AES_FLAGS_ENCRYPT | AES_FLAGS_ECB);
+}
+
+static int mtk_ecb_decrypt(struct ablkcipher_request *req)
+{
+ return mtk_aes_crypt(req, AES_FLAGS_ECB);
+}
+
+static int mtk_cbc_encrypt(struct ablkcipher_request *req)
+{
+ return mtk_aes_crypt(req, AES_FLAGS_ENCRYPT | AES_FLAGS_CBC);
+}
+
+static int mtk_cbc_decrypt(struct ablkcipher_request *req)
+{
+ return mtk_aes_crypt(req, AES_FLAGS_CBC);
+}
+
+static int mtk_aes_cra_init(struct crypto_tfm *tfm)
+{
+ struct mtk_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+ struct mtk_cryp *cryp = NULL;
+
+ tfm->crt_ablkcipher.reqsize = sizeof(struct mtk_aes_reqctx);
+
+ cryp = mtk_aes_find_dev(ctx);
+ if (!cryp) {
+ pr_err("can't find crypto device\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static struct crypto_alg aes_algs[] = {
+{
+ .cra_name = "cbc(aes)",
+ .cra_driver_name = "cbc-aes-mtk",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_ASYNC,
+ .cra_init = mtk_aes_cra_init,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mtk_aes_ctx),
+ .cra_alignmask = 15,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_u.ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .setkey = mtk_aes_setkey,
+ .encrypt = mtk_cbc_encrypt,
+ .decrypt = mtk_cbc_decrypt,
+ .ivsize = AES_BLOCK_SIZE,
+ }
+},
+{
+ .cra_name = "ecb(aes)",
+ .cra_driver_name = "ecb-aes-mtk",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_ASYNC,
+ .cra_init = mtk_aes_cra_init,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mtk_aes_ctx),
+ .cra_alignmask = 15,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_u.ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .setkey = mtk_aes_setkey,
+ .encrypt = mtk_ecb_encrypt,
+ .decrypt = mtk_ecb_decrypt,
+ }
+},
+};
+
+static void mtk_aes_enc_task(unsigned long data)
+{
+ struct mtk_cryp *cryp = (struct mtk_cryp *)data;
+ struct mtk_aes *aes = cryp->aes[0];
+
+ mtk_aes_unmap(cryp, aes);
+ mtk_aes_complete(cryp, aes);
+}
+
+static void mtk_aes_dec_task(unsigned long data)
+{
+ struct mtk_cryp *cryp = (struct mtk_cryp *)data;
+ struct mtk_aes *aes = cryp->aes[1];
+
+ mtk_aes_unmap(cryp, aes);
+ mtk_aes_complete(cryp, aes);
+}
+
+static irqreturn_t mtk_aes_enc_irq(int irq, void *dev_id)
+{
+ struct mtk_cryp *cryp = (struct mtk_cryp *)dev_id;
+ struct mtk_aes *aes = cryp->aes[0];
+ u32 val = mtk_aes_read(cryp, RDR_STAT(RING0));
+
+ mtk_aes_write(cryp, RDR_STAT(RING0), val);
+
+ if (likely(AES_FLAGS_BUSY & aes->flags)) {
+ mtk_aes_write(cryp, RDR_PROC_COUNT(RING0), MTK_DESC_CNT_CLR);
+ mtk_aes_write(cryp, RDR_THRESH(RING0), MTK_RDR_THRESH_DEF);
+
+ tasklet_schedule(&aes->task);
+ } else {
+ dev_warn(cryp->dev, "AES interrupt when no active requests.\n");
+ }
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mtk_aes_dec_irq(int irq, void *dev_id)
+{
+ struct mtk_cryp *cryp = (struct mtk_cryp *)dev_id;
+ struct mtk_aes *aes = cryp->aes[1];
+ u32 val = mtk_aes_read(cryp, RDR_STAT(RING1));
+
+ mtk_aes_write(cryp, RDR_STAT(RING1), val);
+
+ if (likely(AES_FLAGS_BUSY & aes->flags)) {
+ mtk_aes_write(cryp, RDR_PROC_COUNT(RING1), MTK_DESC_CNT_CLR);
+ mtk_aes_write(cryp, RDR_THRESH(RING1), MTK_RDR_THRESH_DEF);
+
+ tasklet_schedule(&aes->task);
+ } else {
+ dev_warn(cryp->dev, "AES interrupt when no active requests.\n");
+ }
+ return IRQ_HANDLED;
+}
+
+/* AES encryption record and decryption record */
+static int mtk_aes_record_init(struct mtk_cryp *cryp)
+{
+ struct mtk_aes **aes = cryp->aes;
+ int i, err = -ENOMEM;
+
+ for (i = 0; i < RECORD_NUM; i++) {
+ aes[i] = kzalloc(sizeof(**aes), GFP_KERNEL);
+ if (!aes[i])
+ goto err_cleanup;
+
+ aes[i]->buf = (void *)__get_free_pages(GFP_KERNEL,
+ AES_BUFFER_ORDER);
+ if (!aes[i]->buf)
+ goto err_cleanup;
+
+ aes[i]->id = i;
+
+ spin_lock_init(&aes[i]->lock);
+ crypto_init_queue(&aes[i]->queue, AES_QUEUE_LENGTH);
+ }
+
+ tasklet_init(&aes[0]->task, mtk_aes_enc_task, (unsigned long)cryp);
+ tasklet_init(&aes[1]->task, mtk_aes_dec_task, (unsigned long)cryp);
+
+ return 0;
+
+err_cleanup:
+ for (; i--; ) {
+ free_page((unsigned long)aes[i]->buf);
+ kfree(aes[i]);
+ }
+
+ return err;
+}
+
+static void mtk_aes_record_free(struct mtk_cryp *cryp)
+{
+ int i;
+
+ for (i = 0; i < RECORD_NUM; i++) {
+ tasklet_kill(&cryp->aes[i]->task);
+ free_page((unsigned long)cryp->aes[i]->buf);
+ kfree(cryp->aes[i]);
+ }
+}
+
+static void mtk_aes_unregister_algs(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(aes_algs); i++)
+ crypto_unregister_alg(&aes_algs[i]);
+}
+
+static int mtk_aes_register_algs(void)
+{
+ int err, i, j;
+
+ for (i = 0; i < ARRAY_SIZE(aes_algs); i++) {
+ err = crypto_register_alg(&aes_algs[i]);
+ if (err)
+ goto err_aes_algs;
+ }
+
+ return 0;
+
+err_aes_algs:
+ for (j = 0; j < i; j++)
+ crypto_unregister_alg(&aes_algs[j]);
+
+ return err;
+}
+
+int mtk_cipher_alg_register(struct mtk_cryp *cryp)
+{
+ int ret;
+
+ INIT_LIST_HEAD(&cryp->aes_list);
+
+ ret = mtk_aes_record_init(cryp);
+ if (ret)
+ goto err_record;
+
+ ret = devm_request_irq(cryp->dev, cryp->irq[RING0], mtk_aes_enc_irq,
+ IRQF_TRIGGER_LOW, "mtk-aes", cryp);
+ if (ret) {
+ dev_err(cryp->dev, "unable to request AES encryption irq.\n");
+ goto err_res;
+ }
+
+ ret = devm_request_irq(cryp->dev, cryp->irq[RING1], mtk_aes_dec_irq,
+ IRQF_TRIGGER_LOW, "mtk-aes", cryp);
+ if (ret) {
+ dev_err(cryp->dev, "unable to request AES decryption irq.\n");
+ goto err_res;
+ }
+
+ /* enable ring0 and ring1 interrupt for cipher */
+ mtk_aes_write(cryp, AIC_ENABLE_SET(RING0), MTK_IRQ_RDR0);
+ mtk_aes_write(cryp, AIC_ENABLE_SET(RING1), MTK_IRQ_RDR1);
+
+ spin_lock(&mtk_aes.lock);
+ list_add_tail(&cryp->aes_list, &mtk_aes.dev_list);
+ spin_unlock(&mtk_aes.lock);
+
+ ret = mtk_aes_register_algs();
+ if (ret)
+ goto err_algs;
+
+ return 0;
+
+err_algs:
+ spin_lock(&mtk_aes.lock);
+ list_del(&cryp->aes_list);
+ spin_unlock(&mtk_aes.lock);
+err_res:
+ mtk_aes_record_free(cryp);
+err_record:
+
+ dev_err(cryp->dev, "mtk-aes initialization failed.\n");
+ return ret;
+}
+EXPORT_SYMBOL(mtk_cipher_alg_register);
+
+void mtk_cipher_alg_release(struct mtk_cryp *cryp)
+{
+ spin_lock(&mtk_aes.lock);
+ list_del(&cryp->aes_list);
+ spin_unlock(&mtk_aes.lock);
+
+ mtk_aes_unregister_algs();
+ mtk_aes_record_free(cryp);
+}
+EXPORT_SYMBOL(mtk_cipher_alg_release);
diff --git a/drivers/crypto/mediatek/mtk-platform.c b/drivers/crypto/mediatek/mtk-platform.c
new file mode 100644
index 0000000..d3a465f
--- /dev/null
+++ b/drivers/crypto/mediatek/mtk-platform.c
@@ -0,0 +1,575 @@
+/*
+ * Support for MediaTek cryptographic accelerator.
+ *
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include "mtk-platform.h"
+#include "mtk-regs.h"
+
+#define MTK_BURST_SIZE(x, y) (((x) & ~0xf0) | ((y) << 4))
+#define MTK_DESC_SIZE_SET(x) ((x) << 0)
+#define MTK_DESC_OFFSET_SET(x) ((x) << 16)
+#define MTK_DFSE_RING_ID(x) (((x) >> 12) & 0xf)
+#define MTK_DSE_MIN_DATA(x) ((x) << 0)
+#define MTK_DSE_MAX_DATA(x) ((x) << 8)
+#define MTK_DFE_MIN_DATA(x) ((x) << 0)
+#define MTK_DFE_MAX_DATA(x) ((x) << 8)
+#define MTK_DFE_MIN_CTRL(x) ((x) << 16)
+#define MTK_DFE_MAX_CTRL(x) ((x) << 24)
+#define MTK_FETCH_SIZE_SET(x) ((x) << 0)
+#define MTK_FETCH_THRESH_SET(x) ((x) << 16)
+#define MTK_IN_BUF_MIN_THRESH(x) ((x) << 8)
+#define MTK_IN_BUF_MAX_THRESH(x) ((x) << 12)
+#define MTK_OUT_BUF_MIN_THRESH(x) ((x) << 0)
+#define MTK_OUT_BUF_MAX_THRESH(x) ((x) << 4)
+#define MTK_CMD_FIFO_SIZE(x) (((x) >> 8) & 0xf)
+#define MTK_RES_FIFO_SIZE(x) (((x) >> 12) & 0xf)
+#define MTK_HIA_DATA_WIDTH(x) (((x) >> 25) & 0x3)
+#define MTK_HIA_DMA_LENGTH(x) (((x) >> 20) & 0x1f)
+#define MTK_IN_TBUF_SIZE(x) (((x) >> 4) & 0xf)
+#define MTK_IN_DBUF_SIZE(x) (((x) >> 8) & 0xf)
+#define MTK_OUT_DBUF_SIZE(x) (((x) >> 16) & 0xf)
+#define MTK_AIC_INT_NUM(x) ((x) & 0x3f)
+#define MTK_AIC_VER_GET(x) ((x) & 0x0ff0ffff)
+#define MTK_PE_TOKEN_CTRL_DEF 0x00014004
+#define MTK_PE_INT_CTRL_DEF 0xc00f400f
+#define MTK_PRNG_CTRL_EN BIT(0)
+#define MTK_PRNG_CTRL_AUTO BIT(1)
+#define MTK_TOKEN_TIMEOUT_EN BIT(22)
+#define MTK_OVL_IRQ_EN BIT(25)
+#define MTK_ATP_PRESENT BIT(30)
+#define MTK_DFSE_THR_CTRL_EN BIT(30)
+#define MTK_DFSE_THR_CTRL_RESET BIT(31)
+#define MTK_HIA_SIGNATURE ((u16)0x35ca)
+#define MTK_CDR_STAT_CLR 0x1f
+#define MTK_RDR_STAT_CLR 0xff
+#define MTK_AIC_VER11 0x011036C9
+#define MTK_AIC_VER12 0x012036C9
+#define MTK_AIC_GLOBAL_CLR 0x7FF00000
+#define MTK_DFSE_IDLE 0xf
+
+/* Cryptographic engine capabilities */
+struct mtk_sys_cap {
+ /* Host interface adapter */
+ u32 hia_ver;
+ u32 hia_opt;
+
+ /* Packet engine */
+ u32 pkt_eng_opt;
+
+ /* Global hardware */
+ u32 hw_opt;
+};
+
+static void mtk_prng_reseed(struct mtk_cryp *cryp)
+{
+ /* 8 words to seed the PRNG to provide IVs */
+ void __iomem *base = cryp->base;
+ const u32 prng_key[8] = {0x48c24cfd, 0x6c07f742,
+ 0xaee75681, 0x0f27c239,
+ 0x79947198, 0xe2991275,
+ 0x21ac3c7c, 0xd008c4b4};
+
+ /* Disable PRNG and set PRNG manual mode */
+ writel(0, base + PE_PRNG_CTRL);
+
+ /* Write new seed data */
+ writel(prng_key[0], base + PE_PRNG_SEED_L);
+ writel(prng_key[1], base + PE_PRNG_SEED_H);
+
+ /* Write new key data */
+ writel(prng_key[2], base + PE_PRNG_KEY_0_L);
+ writel(prng_key[3], base + PE_PRNG_KEY_0_H);
+ writel(prng_key[4], base + PE_PRNG_KEY_1_L);
+ writel(prng_key[5], base + PE_PRNG_KEY_1_H);
+
+ /* Write new LFSR data */
+ writel(prng_key[6], base + PE_PRNG_LFSR_L);
+ writel(prng_key[7], base + PE_PRNG_LFSR_H);
+
+ /* Enable PRNG and set PRNG auto mode */
+ writel(MTK_PRNG_CTRL_EN | MTK_PRNG_CTRL_AUTO, base + PE_PRNG_CTRL);
+}
+
+static void mtk_desc_ring_link(struct mtk_cryp *cryp, u32 mask)
+{
+ /* Assign rings to DFE DSE thread and enable it */
+ writel(MTK_DFSE_THR_CTRL_EN | mask, cryp->base + DFE_THR_CTRL);
+ writel(MTK_DFSE_THR_CTRL_EN | mask, cryp->base + DSE_THR_CTRL);
+}
+
+static void mtk_dfe_dse_buf_setup(struct mtk_cryp *cryp,
+ struct mtk_sys_cap *cap)
+{
+ u32 width = MTK_HIA_DATA_WIDTH(cap->hia_opt) + 2;
+ u32 len = MTK_HIA_DMA_LENGTH(cap->hia_opt) - 1;
+ u32 ipbuf = min(MTK_IN_DBUF_SIZE(cap->hw_opt) + width, len);
+ u32 opbuf = min(MTK_OUT_DBUF_SIZE(cap->hw_opt) + width, len);
+ u32 itbuf = min(MTK_IN_TBUF_SIZE(cap->hw_opt) + width, len);
+ u32 val;
+
+ val = MTK_DFE_MIN_DATA(ipbuf - 1) | MTK_DFE_MAX_DATA(ipbuf) |
+ MTK_DFE_MIN_CTRL(itbuf - 1) | MTK_DFE_MAX_CTRL(itbuf);
+ writel(val, cryp->base + DFE_CFG);
+
+ val = MTK_DFE_MIN_DATA(opbuf - 1) | MTK_DFE_MAX_DATA(opbuf);
+ writel(val, cryp->base + DSE_CFG);
+
+ val = MTK_IN_BUF_MIN_THRESH(ipbuf - 1) | MTK_IN_BUF_MAX_THRESH(ipbuf);
+ writel(val, cryp->base + PE_IN_DBUF_THRESH);
+
+ val = MTK_IN_BUF_MIN_THRESH(itbuf - 1) | MTK_IN_BUF_MAX_THRESH(itbuf);
+ writel(val, cryp->base + PE_IN_TBUF_THRESH);
+
+ val = MTK_OUT_BUF_MIN_THRESH(opbuf - 1) | MTK_OUT_BUF_MAX_THRESH(opbuf);
+ writel(val, cryp->base + PE_OUT_DBUF_THRESH);
+
+ writel(0, cryp->base + PE_OUT_TBUF_THRESH);
+ writel(0, cryp->base + PE_OUT_BUF_CTRL);
+}
+
+static int mtk_dfe_dse_state_check(struct mtk_cryp *cryp)
+{
+ int ret = -EINVAL;
+ u32 val;
+
+ /* Check for completion of all DMA transfers */
+ val = readl(cryp->base + DFE_THR_STAT);
+ if (MTK_DFSE_RING_ID(val) == MTK_DFSE_IDLE) {
+ val = readl(cryp->base + DSE_THR_STAT);
+ if (MTK_DFSE_RING_ID(val) == MTK_DFSE_IDLE)
+ ret = 0;
+ }
+
+ if (!ret) {
+ /* Take DFE and DSE thread out of reset */
+ writel(0, cryp->base + DFE_THR_CTRL);
+ writel(0, cryp->base + DSE_THR_CTRL);
+ } else {
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int mtk_dfe_dse_reset(struct mtk_cryp *cryp)
+{
+ int err;
+
+ /* Reset DSE DFE and correct system priorities for all rings. */
+ writel(MTK_DFSE_THR_CTRL_RESET, cryp->base + DFE_THR_CTRL);
+ writel(0, cryp->base + DFE_PRIO_0);
+ writel(0, cryp->base + DFE_PRIO_1);
+ writel(0, cryp->base + DFE_PRIO_2);
+ writel(0, cryp->base + DFE_PRIO_3);
+
+ writel(MTK_DFSE_THR_CTRL_RESET, cryp->base + DSE_THR_CTRL);
+ writel(0, cryp->base + DSE_PRIO_0);
+ writel(0, cryp->base + DSE_PRIO_1);
+ writel(0, cryp->base + DSE_PRIO_2);
+ writel(0, cryp->base + DSE_PRIO_3);
+
+ err = mtk_dfe_dse_state_check(cryp);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static void mtk_cmd_desc_ring_setup(struct mtk_cryp *cryp,
+ int i, struct mtk_sys_cap *cap)
+{
+ /* Full descriptor that fits FIFO minus one */
+ u32 count =
+ ((1 << MTK_CMD_FIFO_SIZE(cap->hia_opt)) / MTK_DESC_SIZE) - 1;
+ u32 size = count * MTK_DESC_OFFSET;
+ u32 thresh = count * MTK_DESC_SIZE;
+ u32 val;
+
+ /* Temporarily disable external triggering */
+ writel(0, cryp->base + CDR_CFG(i));
+
+ /* Clear CDR count */
+ writel(MTK_DESC_CNT_CLR, cryp->base + CDR_PREP_COUNT(i));
+ writel(MTK_DESC_CNT_CLR, cryp->base + CDR_PROC_COUNT(i));
+
+ writel(0, cryp->base + CDR_PREP_PNTR(i));
+ writel(0, cryp->base + CDR_PROC_PNTR(i));
+ writel(0, cryp->base + CDR_DMA_CFG(i));
+
+ /* Configure command ring host address space */
+ writel(0, cryp->base + CDR_BASE_ADDR_HI(i));
+ writel(cryp->ring[i]->cmd_dma, cryp->base + CDR_BASE_ADDR_LO(i));
+
+ writel(MTK_MAX_RING_SIZE, cryp->base + CDR_RING_SIZE(i));
+
+ /* Clear and disable all CDR interrupts */
+ writel(MTK_CDR_STAT_CLR, cryp->base + CDR_STAT(i));
+
+ /*
+ * Set command descriptor offset and enable additional
+ * token present in descriptor.
+ */
+ val = MTK_DESC_SIZE_SET(MTK_DESC_SIZE) |
+ MTK_DESC_OFFSET_SET(MTK_DESC_OFFSET) |
+ MTK_ATP_PRESENT;
+ writel(val, cryp->base + CDR_DESC_SIZE(i));
+
+ val = MTK_FETCH_SIZE_SET(size) | MTK_FETCH_THRESH_SET(thresh);
+ writel(val, cryp->base + CDR_CFG(i));
+}
+
+static void mtk_res_desc_ring_setup(struct mtk_cryp *cryp,
+ int i, struct mtk_sys_cap *cap)
+{
+ u32 rndup = 2;
+ u32 count = ((1 << MTK_RES_FIFO_SIZE(cap->hia_opt)) / rndup) - 1;
+ u32 size = count * MTK_DESC_OFFSET;
+ u32 thresh = count * rndup;
+ u32 val;
+
+ writel(0, cryp->base + RDR_CFG(i));
+
+ writel(MTK_DESC_CNT_CLR, cryp->base + RDR_PREP_COUNT(i));
+ writel(MTK_DESC_CNT_CLR, cryp->base + RDR_PROC_COUNT(i));
+
+ writel(0, cryp->base + RDR_PREP_PNTR(i));
+ writel(0, cryp->base + RDR_PROC_PNTR(i));
+ writel(0, cryp->base + RDR_DMA_CFG(i));
+
+ writel(0, cryp->base + RDR_BASE_ADDR_HI(i));
+ writel(cryp->ring[i]->res_dma, cryp->base + RDR_BASE_ADDR_LO(i));
+
+ writel(MTK_MAX_RING_SIZE, cryp->base + RDR_RING_SIZE(i));
+ writel(MTK_RDR_STAT_CLR, cryp->base + RDR_STAT(i));
+
+ /*
+ * RDR manager generates update interrupts on a per-completed-packet,
+ * and the rd_proc_thresh_irq interrupt is fired when proc_pkt_count
+ * for the RDR exceeds the number of packets.
+ */
+ writel(MTK_RDR_THRESH_DEF, cryp->base + RDR_THRESH(i));
+
+ /*
+ * Configure a threshold and time-out value for the processed
+ * result descriptors (or complete packets) that are written to
+ * the RDR.
+ */
+ val = MTK_DESC_SIZE_SET(MTK_DESC_SIZE) |
+ MTK_DESC_OFFSET_SET(MTK_DESC_OFFSET);
+ writel(val, cryp->base + RDR_DESC_SIZE(i));
+
+ /*
+ * Configure HIA fetch size and fetch threshold that are used to
+ * fetch blocks of multiple descriptors.
+ */
+ val = MTK_FETCH_SIZE_SET(size) |
+ MTK_FETCH_THRESH_SET(thresh) |
+ MTK_OVL_IRQ_EN;
+ writel(val, cryp->base + RDR_CFG(i));
+}
+
+static int mtk_packet_engine_setup(struct mtk_cryp *cryp)
+{
+ struct mtk_sys_cap cap;
+ int i, err;
+ u32 val;
+
+ cap.hia_ver = readl(cryp->base + HIA_VERSION);
+ cap.hia_opt = readl(cryp->base + HIA_OPTIONS);
+ cap.hw_opt = readl(cryp->base + EIP97_OPTIONS);
+
+ if (!(((u16)cap.hia_ver) == MTK_HIA_SIGNATURE))
+ return -EINVAL;
+
+ /* Configure endianness conversion method for master (DMA) interface */
+ writel(0, cryp->base + EIP97_MST_CTRL);
+
+ /* Set HIA burst size */
+ val = readl(cryp->base + HIA_MST_CTRL);
+ writel(MTK_BURST_SIZE(val, 5), cryp->base + HIA_MST_CTRL);
+
+ err = mtk_dfe_dse_reset(cryp);
+ if (err) {
+ dev_err(cryp->dev, "Failed to reset DFE and DSE.\n");
+ return err;
+ }
+
+ mtk_dfe_dse_buf_setup(cryp, &cap);
+
+ /* Enable the 4 rings for the packet engines. */
+ mtk_desc_ring_link(cryp, 0xf);
+
+ for (i = 0; i < RING_MAX; i++) {
+ mtk_cmd_desc_ring_setup(cryp, i, &cap);
+ mtk_res_desc_ring_setup(cryp, i, &cap);
+ }
+
+ val = MTK_PE_TOKEN_CTRL_DEF | MTK_TOKEN_TIMEOUT_EN;
+ writel(val, cryp->base + PE_TOKEN_CTRL_STAT);
+
+ /* Clear all pending interrupts */
+ writel(MTK_AIC_GLOBAL_CLR, cryp->base + AIC_G_ACK);
+ writel(MTK_PE_INT_CTRL_DEF, cryp->base + PE_INTERRUPT_CTRL_STAT);
+
+ return 0;
+}
+
+static int mtk_aic_cap_check(struct mtk_cryp *cryp, int hw)
+{
+ u32 val;
+
+ if (hw == RING_MAX)
+ val = readl(cryp->base + AIC_G_VERSION);
+ else
+ val = readl(cryp->base + AIC_VERSION(hw));
+
+ val = MTK_AIC_VER_GET(val);
+ if (val != MTK_AIC_VER11 && val != MTK_AIC_VER12)
+ return -ENXIO;
+
+ if (hw == RING_MAX)
+ val = readl(cryp->base + AIC_G_OPTIONS);
+ else
+ val = readl(cryp->base + AIC_OPTIONS(hw));
+
+ val = MTK_AIC_INT_NUM(val);
+ if (!val || val > 32)
+ return -ENXIO;
+
+ return 0;
+}
+
+static int mtk_aic_init(struct mtk_cryp *cryp, int hw)
+{
+ int err;
+
+ err = mtk_aic_cap_check(cryp, hw);
+ if (err)
+ return err;
+
+ /* Disable all interrupts and set initial configuration */
+ if (hw == RING_MAX) {
+ writel(0, cryp->base + AIC_G_ENABLE_CTRL);
+ writel(0, cryp->base + AIC_G_POL_CTRL);
+ writel(0, cryp->base + AIC_G_TYPE_CTRL);
+ writel(0, cryp->base + AIC_G_ENABLE_SET);
+ } else {
+ writel(0, cryp->base + AIC_ENABLE_CTRL(hw));
+ writel(0, cryp->base + AIC_POL_CTRL(hw));
+ writel(0, cryp->base + AIC_TYPE_CTRL(hw));
+ writel(0, cryp->base + AIC_ENABLE_SET(hw));
+ }
+
+ return 0;
+}
+
+static int mtk_accelerator_init(struct mtk_cryp *cryp)
+{
+ int i, err;
+
+ /* Initialize advanced interrupt controller(AIC) */
+ for (i = 0; i < 5; i++) {
+ err = mtk_aic_init(cryp, i);
+ if (err) {
+ dev_err(cryp->dev, "Failed to initialize AIC.\n");
+ return err;
+ }
+ }
+
+ /* Initialize packet engine */
+ err = mtk_packet_engine_setup(cryp);
+ if (err) {
+ dev_err(cryp->dev, "Failed to configure packet engine.\n");
+ return err;
+ }
+
+ mtk_prng_reseed(cryp);
+ return 0;
+}
+
+static void mtk_desc_dma_free(struct mtk_cryp *cryp)
+{
+ int i;
+
+ for (i = 0; i < RING_MAX; i++) {
+ dma_free_coherent(cryp->dev, MTK_MAX_RING_SIZE,
+ cryp->ring[i]->res_base,
+ cryp->ring[i]->res_dma);
+ dma_free_coherent(cryp->dev, MTK_MAX_RING_SIZE,
+ cryp->ring[i]->cmd_base,
+ cryp->ring[i]->cmd_dma);
+ kfree(cryp->ring[i]);
+ }
+}
+
+static int mtk_desc_ring_alloc(struct mtk_cryp *cryp)
+{
+ struct mtk_ring **ring = cryp->ring;
+ int i, err = ENOMEM;
+
+ for (i = 0; i < RING_MAX; i++) {
+ ring[i] = kzalloc(sizeof(**ring), GFP_KERNEL);
+ if (!ring[i])
+ goto err_cleanup;
+
+ ring[i]->cmd_base = dma_zalloc_coherent(cryp->dev,
+ MTK_MAX_RING_SIZE, &ring[i]->cmd_dma,
+ GFP_KERNEL);
+ if (!ring[i]->cmd_base)
+ goto err_cleanup;
+
+ ring[i]->res_base = dma_zalloc_coherent(cryp->dev,
+ MTK_MAX_RING_SIZE, &ring[i]->res_dma,
+ GFP_KERNEL);
+ if (!ring[i]->res_base)
+ goto err_cleanup;
+ }
+ return 0;
+
+err_cleanup:
+ for (; i--; ) {
+ dma_free_coherent(cryp->dev, MTK_MAX_RING_SIZE,
+ ring[i]->res_base, ring[i]->res_dma);
+ dma_free_coherent(cryp->dev, MTK_MAX_RING_SIZE,
+ ring[i]->cmd_base, ring[i]->cmd_dma);
+ kfree(ring[i]);
+ }
+ return err;
+}
+
+static int mtk_crypto_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct mtk_cryp *cryp;
+ int i, err;
+
+ cryp = devm_kzalloc(&pdev->dev, sizeof(*cryp), GFP_KERNEL);
+ if (!cryp)
+ return -ENOMEM;
+
+ cryp->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(cryp->base))
+ return PTR_ERR(cryp->base);
+
+ for (i = 0; i < 5; i++) {
+ cryp->irq[i] = platform_get_irq(pdev, i);
+ if (cryp->irq[i] < 0) {
+ dev_err(cryp->dev, "no IRQ:%d resource info\n", i);
+ return -ENXIO;
+ }
+ }
+
+ cryp->clk_ethif = devm_clk_get(&pdev->dev, "ethif");
+ cryp->clk_cryp = devm_clk_get(&pdev->dev, "cryp");
+ if (IS_ERR(cryp->clk_ethif) || IS_ERR(cryp->clk_cryp))
+ return -EPROBE_DEFER;
+
+ cryp->dev = &pdev->dev;
+ pm_runtime_enable(cryp->dev);
+ pm_runtime_get_sync(cryp->dev);
+
+ err = clk_prepare_enable(cryp->clk_ethif);
+ if (err)
+ goto err_clk_ethif;
+
+ err = clk_prepare_enable(cryp->clk_cryp);
+ if (err)
+ goto err_clk_cryp;
+
+ err = mtk_desc_ring_alloc(cryp);
+ if (err) {
+ dev_err(cryp->dev, "Unable to allocate descriptor rings.\n");
+ goto err_resource;
+ }
+
+ err = mtk_accelerator_init(cryp);
+ if (err) {
+ dev_err(cryp->dev, "Failed to initialize cryptographic engine.\n");
+ goto err_engine;
+ }
+
+ err = mtk_cipher_alg_register(cryp);
+ if (err) {
+ dev_err(cryp->dev, "Unable to register MTK-AES.\n");
+ goto err_cipher;
+ }
+
+ err = mtk_hash_alg_register(cryp);
+ if (err) {
+ dev_err(cryp->dev, "Unable to register MTK-SHA.\n");
+ goto err_hash;
+ }
+
+ platform_set_drvdata(pdev, cryp);
+ return 0;
+
+err_hash:
+ mtk_cipher_alg_release(cryp);
+err_cipher:
+ mtk_dfe_dse_reset(cryp);
+err_engine:
+ mtk_desc_dma_free(cryp);
+err_resource:
+ clk_disable_unprepare(cryp->clk_cryp);
+err_clk_cryp:
+ clk_disable_unprepare(cryp->clk_ethif);
+err_clk_ethif:
+ pm_runtime_put_sync(cryp->dev);
+ pm_runtime_disable(cryp->dev);
+
+ return err;
+}
+
+static int mtk_crypto_remove(struct platform_device *pdev)
+{
+ struct mtk_cryp *cryp = platform_get_drvdata(pdev);
+
+ mtk_hash_alg_release(cryp);
+ mtk_cipher_alg_release(cryp);
+ mtk_desc_dma_free(cryp);
+
+ clk_disable_unprepare(cryp->clk_cryp);
+ clk_disable_unprepare(cryp->clk_ethif);
+
+ pm_runtime_put_sync(cryp->dev);
+ pm_runtime_disable(cryp->dev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+const struct of_device_id of_crypto_id[] = {
+ { .compatible = "mediatek,mt7623-crypto" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_crypto_id);
+
+static struct platform_driver mtk_crypto_driver = {
+ .probe = mtk_crypto_probe,
+ .remove = mtk_crypto_remove,
+ .driver = {
+ .name = "mtk-crypto",
+ .owner = THIS_MODULE,
+ .of_match_table = of_crypto_id,
+ },
+};
+module_platform_driver(mtk_crypto_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>");
+MODULE_DESCRIPTION("Cryptographic accelerator driver for MediaTek SoC");
diff --git a/drivers/crypto/mediatek/mtk-platform.h b/drivers/crypto/mediatek/mtk-platform.h
new file mode 100644
index 0000000..5390ef4
--- /dev/null
+++ b/drivers/crypto/mediatek/mtk-platform.h
@@ -0,0 +1,230 @@
+/*
+ * Support for MediaTek cryptographic accelerator.
+ *
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ */
+
+#ifndef __MTK_PLATFORM_H_
+#define __MTK_PLATFORM_H_
+
+#include <linux/crypto.h>
+#include <crypto/internal/hash.h>
+#include <linux/interrupt.h>
+
+#define MTK_RDR_THRESH_DEF 0x800001
+
+#define MTK_IRQ_RDR0 BIT(1)
+#define MTK_IRQ_RDR1 BIT(3)
+#define MTK_IRQ_RDR2 BIT(5)
+#define MTK_IRQ_RDR3 BIT(7)
+
+#define MTK_DESC_CNT_CLR BIT(31)
+#define MTK_DESC_LAST BIT(22)
+#define MTK_DESC_FIRST BIT(23)
+#define MTK_DESC_BUF_LEN(x) ((x) & 0x1ffff)
+#define MTK_DESC_CT_LEN(x) (((x) & 0xff) << 24)
+
+#define WORD(x) ((x) >> 2)
+
+/**
+ * Ring 0/1 are used by AES encrypt and decrypt.
+ * Ring 2/3 are used by SHA.
+ */
+enum {
+ RING0 = 0,
+ RING1,
+ RING2,
+ RING3,
+ RING_MAX,
+};
+
+#define RECORD_NUM (RING_MAX / 2)
+
+/**
+ * struct mtk_desc - DMA descriptor
+ * @hdr: the descriptor control header
+ * @buf: DMA address of input buffer
+ * @ct: the command token that control operation flow
+ * @ct_hdr: the command token control header
+ * @tag: the user-defined field
+ * @tfm: DMA address of transform state
+ * @bound: align descriptors offset boundary
+ *
+ * Structure passed to the crypto engine to describe the crypto
+ * operation to be executed.
+ */
+struct mtk_desc {
+ u32 hdr;
+ u32 buf;
+ u32 ct;
+ u32 ct_hdr;
+ u32 tag;
+ u32 tfm;
+ u32 bound[2];
+};
+
+/**
+ * struct mtk_ring - Descriptor ring
+ * @cmd_base: pointer to command descriptor ring base
+ * @cmd_dma: DMA address of command descriptor ring
+ * @res_base: pointer to result descriptor ring base
+ * @res_dma: DMA address of result descriptor ring
+ * @pos: current position in the ring
+ */
+struct mtk_ring {
+ struct mtk_desc *cmd_base;
+ dma_addr_t cmd_dma;
+ struct mtk_desc *res_base;
+ dma_addr_t res_dma;
+ u32 pos;
+};
+
+#define MTK_MAX_DESC_NUM 512
+#define MTK_DESC_OFFSET WORD(sizeof(struct mtk_desc))
+#define MTK_DESC_SIZE (MTK_DESC_OFFSET - 2)
+#define MTK_MAX_RING_SIZE ((sizeof(struct mtk_desc) * MTK_MAX_DESC_NUM))
+#define MTK_DESC_CNT(x) ((MTK_DESC_OFFSET * (x)) << 2)
+
+/**
+ * struct mtk_aes_dma - Structure that holds sg list info
+ * @sg: pointer to scatter-gather list
+ * @nents: number of entries in the sg list
+ * @remainder: remainder of sg list
+ * @sg_len: number of entries in the sg mapped list
+ */
+struct mtk_aes_dma {
+ struct scatterlist *sg;
+ int nents;
+ u32 remainder;
+ u32 sg_len;
+};
+
+/**
+ * struct mtk_aes - AES operation record
+ * @queue: crypto request queue
+ * @req: pointer to ablkcipher request
+ * @task: the tasklet is use in AES interrupt
+ * @src: the structure that holds source sg list info
+ * @dst: the structure that holds destination sg list info
+ * @aligned_sg: the scatter list is use to alignment
+ * @real_dst: pointer to the destination sg list
+ * @total: request buffer length
+ * @buf: pointer to page buffer
+ * @info: pointer to AES transform state and command token
+ * @ct_hdr: AES command token control field
+ * @ct_size: size of AES command token
+ * @ct_dma: DMA address of AES command token
+ * @tfm_dma: DMA address of AES transform state
+ * @id: record identification
+ * @flags: it's describing AES operation state
+ * @lock: the ablkcipher queue lock
+ *
+ * Structure used to record AES execution state
+ */
+struct mtk_aes {
+ struct crypto_queue queue;
+ struct ablkcipher_request *req;
+ struct tasklet_struct task;
+ struct mtk_aes_dma src;
+ struct mtk_aes_dma dst;
+
+ struct scatterlist aligned_sg;
+ struct scatterlist *real_dst;
+
+ size_t total;
+ void *buf;
+
+ void *info;
+ u32 ct_hdr;
+ u32 ct_size;
+ dma_addr_t ct_dma;
+ dma_addr_t tfm_dma;
+
+ u8 id;
+ unsigned long flags;
+ /* queue lock */
+ spinlock_t lock;
+};
+
+/**
+ * struct mtk_sha - SHA operation record
+ * @queue: crypto request queue
+ * @req: pointer to ahash request
+ * @task: the tasklet is use in SHA interrupt
+ * @info: pointer to SHA transform state and command token
+ * @ct_hdr: SHA command token control field
+ * @ct_size: size of SHA command token
+ * @ct_dma: DMA address of SHA command token
+ * @tfm_dma: DMA address of SHA transform state
+ * @id: record identification
+ * @flags: it's describing SHA operation state
+ * @lock: the ablkcipher queue lock
+ *
+ * Structure used to record SHA execution state.
+ */
+struct mtk_sha {
+ struct crypto_queue queue;
+ struct ahash_request *req;
+ struct tasklet_struct task;
+
+ void *info;
+ u32 ct_hdr;
+ u32 ct_size;
+ dma_addr_t ct_dma;
+ dma_addr_t tfm_dma;
+
+ u8 id;
+ unsigned long flags;
+ /* queue lock */
+ spinlock_t lock;
+};
+
+/**
+ * struct mtk_cryp - Cryptographic device
+ * @base: pointer to mapped register I/O base
+ * @dev: pointer to device
+ * @clk_ethif: pointer to ethif clock
+ * @clk_cryp: pointer to crypto clock
+ * @irq: global system and rings IRQ
+ * @ring: pointer to execution state of AES
+ * @aes: pointer to execution state of SHA
+ * @sha: each execution record map to a ring
+ * @aes_list: device list of AES
+ * @sha_list: device list of SHA
+ * @tmp: pointer to temporary buffer for internal use
+ * @tmp_dma: DMA address of temporary buffer
+ * @rec: it's used to select SHA record for tfm
+ *
+ * Structure storing cryptographic device information.
+ */
+struct mtk_cryp {
+ void __iomem *base;
+ struct device *dev;
+ struct clk *clk_ethif;
+ struct clk *clk_cryp;
+ int irq[5];
+
+ struct mtk_ring *ring[RING_MAX];
+ struct mtk_aes *aes[RECORD_NUM];
+ struct mtk_sha *sha[RECORD_NUM];
+
+ struct list_head aes_list;
+ struct list_head sha_list;
+
+ void *tmp;
+ dma_addr_t tmp_dma;
+ bool rec;
+};
+
+int mtk_cipher_alg_register(struct mtk_cryp *cryp);
+void mtk_cipher_alg_release(struct mtk_cryp *cryp);
+int mtk_hash_alg_register(struct mtk_cryp *cryp);
+void mtk_hash_alg_release(struct mtk_cryp *cryp);
+
+#endif /* __MTK_PLATFORM_H_ */
diff --git a/drivers/crypto/mediatek/mtk-regs.h b/drivers/crypto/mediatek/mtk-regs.h
new file mode 100644
index 0000000..94f4eb8
--- /dev/null
+++ b/drivers/crypto/mediatek/mtk-regs.h
@@ -0,0 +1,194 @@
+/*
+ * Support for MediaTek cryptographic accelerator.
+ *
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ */
+
+#ifndef __MTK_REGS_H__
+#define __MTK_REGS_H__
+
+/* HIA, Command Descriptor Ring Manager */
+#define CDR_BASE_ADDR_LO(x) (0x0 + ((x) << 12))
+#define CDR_BASE_ADDR_HI(x) (0x4 + ((x) << 12))
+#define CDR_DATA_BASE_ADDR_LO(x) (0x8 + ((x) << 12))
+#define CDR_DATA_BASE_ADDR_HI(x) (0xC + ((x) << 12))
+#define CDR_ACD_BASE_ADDR_LO(x) (0x10 + ((x) << 12))
+#define CDR_ACD_BASE_ADDR_HI(x) (0x14 + ((x) << 12))
+#define CDR_RING_SIZE(x) (0x18 + ((x) << 12))
+#define CDR_DESC_SIZE(x) (0x1C + ((x) << 12))
+#define CDR_CFG(x) (0x20 + ((x) << 12))
+#define CDR_DMA_CFG(x) (0x24 + ((x) << 12))
+#define CDR_THRESH(x) (0x28 + ((x) << 12))
+#define CDR_PREP_COUNT(x) (0x2C + ((x) << 12))
+#define CDR_PROC_COUNT(x) (0x30 + ((x) << 12))
+#define CDR_PREP_PNTR(x) (0x34 + ((x) << 12))
+#define CDR_PROC_PNTR(x) (0x38 + ((x) << 12))
+#define CDR_STAT(x) (0x3C + ((x) << 12))
+
+/* HIA, Result Descriptor Ring Manager */
+#define RDR_BASE_ADDR_LO(x) (0x800 + ((x) << 12))
+#define RDR_BASE_ADDR_HI(x) (0x804 + ((x) << 12))
+#define RDR_DATA_BASE_ADDR_LO(x) (0x808 + ((x) << 12))
+#define RDR_DATA_BASE_ADDR_HI(x) (0x80C + ((x) << 12))
+#define RDR_ACD_BASE_ADDR_LO(x) (0x810 + ((x) << 12))
+#define RDR_ACD_BASE_ADDR_HI(x) (0x814 + ((x) << 12))
+#define RDR_RING_SIZE(x) (0x818 + ((x) << 12))
+#define RDR_DESC_SIZE(x) (0x81C + ((x) << 12))
+#define RDR_CFG(x) (0x820 + ((x) << 12))
+#define RDR_DMA_CFG(x) (0x824 + ((x) << 12))
+#define RDR_THRESH(x) (0x828 + ((x) << 12))
+#define RDR_PREP_COUNT(x) (0x82C + ((x) << 12))
+#define RDR_PROC_COUNT(x) (0x830 + ((x) << 12))
+#define RDR_PREP_PNTR(x) (0x834 + ((x) << 12))
+#define RDR_PROC_PNTR(x) (0x838 + ((x) << 12))
+#define RDR_STAT(x) (0x83C + ((x) << 12))
+
+/* HIA, Ring AIC */
+#define AIC_POL_CTRL(x) (0xE000 - ((x) << 12))
+#define AIC_TYPE_CTRL(x) (0xE004 - ((x) << 12))
+#define AIC_ENABLE_CTRL(x) (0xE008 - ((x) << 12))
+#define AIC_RAW_STAL(x) (0xE00C - ((x) << 12))
+#define AIC_ENABLE_SET(x) (0xE00C - ((x) << 12))
+#define AIC_ENABLED_STAT(x) (0xE010 - ((x) << 12))
+#define AIC_ACK(x) (0xE010 - ((x) << 12))
+#define AIC_ENABLE_CLR(x) (0xE014 - ((x) << 12))
+#define AIC_OPTIONS(x) (0xE018 - ((x) << 12))
+#define AIC_VERSION(x) (0xE01C - ((x) << 12))
+
+/* HIA, Global AIC */
+#define AIC_G_POL_CTRL 0xF800
+#define AIC_G_TYPE_CTRL 0xF804
+#define AIC_G_ENABLE_CTRL 0xF808
+#define AIC_G_RAW_STAT 0xF80C
+#define AIC_G_ENABLE_SET 0xF80C
+#define AIC_G_ENABLED_STAT 0xF810
+#define AIC_G_ACK 0xF810
+#define AIC_G_ENABLE_CLR 0xF814
+#define AIC_G_OPTIONS 0xF818
+#define AIC_G_VERSION 0xF81C
+
+/* HIA, Data Fetch Engine */
+#define DFE_CFG 0xF000
+#define DFE_PRIO_0 0xF010
+#define DFE_PRIO_1 0xF014
+#define DFE_PRIO_2 0xF018
+#define DFE_PRIO_3 0xF01C
+
+/* HIA, Data Fetch Engine access monitoring for CDR */
+#define DFE_RING_REGION_LO(x) (0xF080 + ((x) << 3))
+#define DFE_RING_REGION_HI(x) (0xF084 + ((x) << 3))
+
+/* HIA, Data Fetch Engine thread control and status for thread */
+#define DFE_THR_CTRL 0xF200
+#define DFE_THR_STAT 0xF204
+#define DFE_THR_DESC_CTRL 0xF208
+#define DFE_THR_DESC_DPTR_LO 0xF210
+#define DFE_THR_DESC_DPTR_HI 0xF214
+#define DFE_THR_DESC_ACDPTR_LO 0xF218
+#define DFE_THR_DESC_ACDPTR_HI 0xF21C
+
+/* HIA, Data Store Engine */
+#define DSE_CFG 0xF400
+#define DSE_PRIO_0 0xF410
+#define DSE_PRIO_1 0xF414
+#define DSE_PRIO_2 0xF418
+#define DSE_PRIO_3 0xF41C
+
+/* HIA, Data Store Engine access monitoring for RDR */
+#define DSE_RING_REGION_LO(x) (0xF480 + ((x) << 3))
+#define DSE_RING_REGION_HI(x) (0xF484 + ((x) << 3))
+
+/* HIA, Data Store Engine thread control and status for thread */
+#define DSE_THR_CTRL 0xF600
+#define DSE_THR_STAT 0xF604
+#define DSE_THR_DESC_CTRL 0xF608
+#define DSE_THR_DESC_DPTR_LO 0xF610
+#define DSE_THR_DESC_DPTR_HI 0xF614
+#define DSE_THR_DESC_S_DPTR_LO 0xF618
+#define DSE_THR_DESC_S_DPTR_HI 0xF61C
+#define DSE_THR_ERROR_STAT 0xF620
+
+/* HIA Global */
+#define HIA_MST_CTRL 0xFFF4
+#define HIA_OPTIONS 0xFFF8
+#define HIA_VERSION 0xFFFC
+
+/* Processing Engine Input Side, Processing Engine */
+#define PE_IN_DBUF_THRESH 0x10000
+#define PE_IN_TBUF_THRESH 0x10100
+
+/* Packet Engine Configuration / Status Registers */
+#define PE_TOKEN_CTRL_STAT 0x11000
+#define PE_FUNCTION_EN 0x11004
+#define PE_CONTEXT_CTRL 0x11008
+#define PE_INTERRUPT_CTRL_STAT 0x11010
+#define PE_CONTEXT_STAT 0x1100C
+#define PE_OUT_TRANS_CTRL_STAT 0x11018
+#define PE_OUT_BUF_CTRL 0x1101C
+
+/* Packet Engine PRNG Registers */
+#define PE_PRNG_STAT 0x11040
+#define PE_PRNG_CTRL 0x11044
+#define PE_PRNG_SEED_L 0x11048
+#define PE_PRNG_SEED_H 0x1104C
+#define PE_PRNG_KEY_0_L 0x11050
+#define PE_PRNG_KEY_0_H 0x11054
+#define PE_PRNG_KEY_1_L 0x11058
+#define PE_PRNG_KEY_1_H 0x1105C
+#define PE_PRNG_RES_0 0x11060
+#define PE_PRNG_RES_1 0x11064
+#define PE_PRNG_RES_2 0x11068
+#define PE_PRNG_RES_3 0x1106C
+#define PE_PRNG_LFSR_L 0x11070
+#define PE_PRNG_LFSR_H 0x11074
+
+/* Packet Engine AIC */
+#define PE_EIP96_AIC_POL_CTRL 0x113C0
+#define PE_EIP96_AIC_TYPE_CTRL 0x113C4
+#define PE_EIP96_AIC_ENABLE_CTRL 0x113C8
+#define PE_EIP96_AIC_RAW_STAT 0x113CC
+#define PE_EIP96_AIC_ENABLE_SET 0x113CC
+#define PE_EIP96_AIC_ENABLED_STAT 0x113D0
+#define PE_EIP96_AIC_ACK 0x113D0
+#define PE_EIP96_AIC_ENABLE_CLR 0x113D4
+#define PE_EIP96_AIC_OPTIONS 0x113D8
+#define PE_EIP96_AIC_VERSION 0x113DC
+
+/* Packet Engine Options & Version Registers */
+#define PE_EIP96_OPTIONS 0x113F8
+#define PE_EIP96_VERSION 0x113FC
+
+/* Processing Engine Output Side */
+#define PE_OUT_DBUF_THRESH 0x11C00
+#define PE_OUT_TBUF_THRESH 0x11D00
+
+/* Processing Engine Local AIC */
+#define PE_AIC_POL_CTRL 0x11F00
+#define PE_AIC_TYPE_CTRL 0x11F04
+#define PE_AIC_ENABLE_CTRL 0x11F08
+#define PE_AIC_RAW_STAT 0x11F0C
+#define PE_AIC_ENABLE_SET 0x11F0C
+#define PE_AIC_ENABLED_STAT 0x11F10
+#define PE_AIC_ENABLE_CLR 0x11F14
+#define PE_AIC_OPTIONS 0x11F18
+#define PE_AIC_VERSION 0x11F1C
+
+/* Processing Engine General Configuration and Version */
+#define PE_IN_FLIGHT 0x11FF0
+#define PE_OPTIONS 0x11FF8
+#define PE_VERSION 0x11FFC
+
+/* EIP-97 - Global */
+#define EIP97_CLOCK_STATE 0x1FFE4
+#define EIP97_FORCE_CLOCK_ON 0x1FFE8
+#define EIP97_FORCE_CLOCK_OFF 0x1FFEC
+#define EIP97_MST_CTRL 0x1FFF4
+#define EIP97_OPTIONS 0x1FFF8
+#define EIP97_VERSION 0x1FFFC
+#endif /* __MTK_REGS_H__ */
diff --git a/drivers/crypto/mediatek/mtk-sha.c b/drivers/crypto/mediatek/mtk-sha.c
new file mode 100644
index 0000000..45479bb
--- /dev/null
+++ b/drivers/crypto/mediatek/mtk-sha.c
@@ -0,0 +1,1384 @@
+/*
+ * Cryptographic API.
+ *
+ * Support for MediaTek SHA1/SHA2 hardware accelerator.
+ *
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Some ideas are from atmel-sha.c and omap-sham.c drivers.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/crypto.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/algapi.h>
+#include <crypto/sha.h>
+#include <crypto/internal/hash.h>
+#include "mtk-platform.h"
+#include "mtk-regs.h"
+
+#define SHA_ALIGN_MSK (sizeof(u32) - 1)
+#define SHA_QUEUE_SIZE 512
+#define SHA_TMP_STATE_SIZE 512
+
+#define SHA_DATA_LEN_MSK GENMASK(16, 0)
+#define SHA_BUFFER_LEN ((u32)PAGE_SIZE)
+
+#define SHA_OP_UPDATE 1
+#define SHA_OP_FINAL 2
+
+/* SHA command token */
+#define SHA_CT_SIZE 5
+#define SHA_CT_CTRL_HDR 0x02220000
+#define SHA_COMMAND0 0x03020000
+#define SHA_COMMAND1 0x21060000
+#define SHA_COMMAND2 0xe0e63802
+
+/* SHA transform information */
+#define SHA_TFM_HASH (0x2 << 0)
+#define SHA_TFM_DIG_TYPE (0x1 << 21)
+#define SHA_TFM_SIZE(x) ((x) << 8)
+#define SHA_TFM_START (0x1 << 4)
+#define SHA_TFM_CONTINUE (0x1 << 5)
+#define SHA_TFM_HASH_STORE (0x1 << 19)
+#define SHA_TFM_SHA1 (0x2 << 23)
+#define SHA_TFM_SHA256 (0x3 << 23)
+#define SHA_TFM_SHA224 (0x4 << 23)
+#define SHA_TFM_SHA512 (0x5 << 23)
+#define SHA_TFM_SHA384 (0x6 << 23)
+#define SHA_TFM_DIGEST(x) (((x) & 0xf) << 24)
+
+/* SHA flags */
+#define SHA_FLAGS_BUSY BIT(0)
+#define SHA_FLAGS_FINAL BIT(1)
+#define SHA_FLAGS_FINUP BIT(2)
+#define SHA_FLAGS_SG BIT(3)
+#define SHA_FLAGS_ALGO_MASK GENMASK(8, 4)
+#define SHA_FLAGS_SHA1 BIT(4)
+#define SHA_FLAGS_SHA224 BIT(5)
+#define SHA_FLAGS_SHA256 BIT(6)
+#define SHA_FLAGS_SHA384 BIT(7)
+#define SHA_FLAGS_SHA512 BIT(8)
+#define SHA_FLAGS_HMAC BIT(9)
+#define SHA_FLAGS_PAD BIT(10)
+
+/* SHA command token */
+struct mtk_sha_ct {
+ u32 tfm_ctrl0;
+ u32 tfm_ctrl1;
+ u32 ct_ctrl0;
+ u32 ct_ctrl1;
+ u32 ct_ctrl2;
+};
+
+/* SHA transform state */
+struct mtk_sha_tfm {
+ u32 tfm_ctrl0;
+ u32 tfm_ctrl1;
+ u8 digest[SHA512_DIGEST_SIZE] __aligned(sizeof(u32));
+};
+
+struct mtk_sha_info {
+ struct mtk_sha_ct ct;
+ struct mtk_sha_tfm tfm;
+};
+
+struct mtk_sha_reqctx {
+ struct mtk_sha_info info;
+ unsigned long flags;
+ unsigned long op;
+
+ u64 digcnt;
+ bool start;
+ size_t bufcnt;
+ dma_addr_t dma_addr;
+
+ /* walk state */
+ struct scatterlist *sg;
+ u32 offset; /* offset in current sg */
+ u32 total; /* total request */
+ size_t ds;
+ size_t bs;
+
+ u8 *buffer;
+};
+
+struct mtk_sha_hmac_ctx {
+ struct crypto_shash *shash;
+ u8 ipad[SHA512_BLOCK_SIZE] __aligned(sizeof(u32));
+ u8 opad[SHA512_BLOCK_SIZE] __aligned(sizeof(u32));
+};
+
+struct mtk_sha_ctx {
+ struct mtk_cryp *cryp;
+ unsigned long flags;
+ u8 id;
+ u8 buf[SHA_BUFFER_LEN] __aligned(sizeof(u32));
+
+ struct mtk_sha_hmac_ctx base[0];
+};
+
+struct mtk_sha_drv {
+ struct list_head dev_list;
+ /* device list lock */
+ spinlock_t lock;
+};
+
+static struct mtk_sha_drv mtk_sha = {
+ .dev_list = LIST_HEAD_INIT(mtk_sha.dev_list),
+ .lock = __SPIN_LOCK_UNLOCKED(mtk_sha.lock),
+};
+
+static int mtk_sha_handle_queue(struct mtk_cryp *cryp, u8 id,
+ struct ahash_request *req);
+
+static inline u32 mtk_sha_read(struct mtk_cryp *cryp, u32 offset)
+{
+ return readl_relaxed(cryp->base + offset);
+}
+
+static inline void mtk_sha_write(struct mtk_cryp *cryp,
+ u32 offset, u32 value)
+{
+ writel_relaxed(value, cryp->base + offset);
+}
+
+static struct mtk_cryp *mtk_sha_find_dev(struct mtk_sha_ctx *tctx)
+{
+ struct mtk_cryp *cryp = NULL;
+ struct mtk_cryp *tmp;
+
+ spin_lock_bh(&mtk_sha.lock);
+ if (!tctx->cryp) {
+ list_for_each_entry(tmp, &mtk_sha.dev_list, sha_list) {
+ cryp = tmp;
+ break;
+ }
+ tctx->cryp = cryp;
+ } else {
+ cryp = tctx->cryp;
+ }
+
+ /*
+ * Assign record id to tfm in round-robin fashion, and this
+ * help us to link to descriptor ring and record.
+ */
+ tctx->id = cryp->rec;
+ cryp->rec = !cryp->rec;
+
+ spin_unlock_bh(&mtk_sha.lock);
+
+ return cryp;
+}
+
+static int mtk_sha_append_sg(struct mtk_sha_reqctx *ctx)
+{
+ size_t count;
+
+ while ((ctx->bufcnt < SHA_BUFFER_LEN) && ctx->total) {
+ count = min(ctx->sg->length - ctx->offset, ctx->total);
+ count = min(count, SHA_BUFFER_LEN - ctx->bufcnt);
+
+ if (count <= 0) {
+ /*
+ * Check if count <= 0 because the buffer is full or
+ * because the sg length is 0. In the latest case,
+ * check if there is another sg in the list, a 0 length
+ * sg doesn't necessarily mean the end of the sg list.
+ */
+ if ((ctx->sg->length == 0) && !sg_is_last(ctx->sg)) {
+ ctx->sg = sg_next(ctx->sg);
+ continue;
+ } else {
+ break;
+ }
+ }
+
+ scatterwalk_map_and_copy(ctx->buffer + ctx->bufcnt, ctx->sg,
+ ctx->offset, count, 0);
+
+ ctx->bufcnt += count;
+ ctx->offset += count;
+ ctx->total -= count;
+
+ if (ctx->offset == ctx->sg->length) {
+ ctx->sg = sg_next(ctx->sg);
+ if (ctx->sg)
+ ctx->offset = 0;
+ else
+ ctx->total = 0;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * The purpose of this padding is to ensure that the padded message is a
+ * multiple of 512 bits (SHA1/SHA224/SHA256) or 1024 bits (SHA384/SHA512).
+ * The bit "1" is appended at the end of the message followed by
+ * "padlen-1" zero bits. Then a 64 bits block (SHA1/SHA224/SHA256) or
+ * 128 bits block (SHA384/SHA512) equals to the message length in bits
+ * is appended.
+ *
+ * For SHA1/SHA224/SHA256, padlen is calculated as followed:
+ * - if message length < 56 bytes then padlen = 56 - message length
+ * - else padlen = 64 + 56 - message length
+ *
+ * For SHA384/SHA512, padlen is calculated as followed:
+ * - if message length < 112 bytes then padlen = 112 - message length
+ * - else padlen = 128 + 112 - message length
+ */
+static void mtk_sha_fill_padding(struct mtk_sha_reqctx *ctx, u32 len)
+{
+ u32 index, padlen;
+ u64 bits[2];
+ u64 size = ctx->digcnt;
+
+ size += ctx->bufcnt;
+ size += len;
+
+ bits[1] = cpu_to_be64(size << 3);
+ bits[0] = cpu_to_be64(size >> 61);
+
+ if (ctx->flags & (SHA_FLAGS_SHA384 | SHA_FLAGS_SHA512)) {
+ index = ctx->bufcnt & 0x7f;
+ padlen = (index < 112) ? (112 - index) : ((128 + 112) - index);
+ *(ctx->buffer + ctx->bufcnt) = 0x80;
+ memset(ctx->buffer + ctx->bufcnt + 1, 0, padlen - 1);
+ memcpy(ctx->buffer + ctx->bufcnt + padlen, bits, 16);
+ ctx->bufcnt += padlen + 16;
+ ctx->flags |= SHA_FLAGS_PAD;
+ } else {
+ index = ctx->bufcnt & 0x3f;
+ padlen = (index < 56) ? (56 - index) : ((64 + 56) - index);
+ *(ctx->buffer + ctx->bufcnt) = 0x80;
+ memset(ctx->buffer + ctx->bufcnt + 1, 0, padlen - 1);
+ memcpy(ctx->buffer + ctx->bufcnt + padlen, &bits[1], 8);
+ ctx->bufcnt += padlen + 8;
+ ctx->flags |= SHA_FLAGS_PAD;
+ }
+}
+
+static void mtk_sha_info_init(struct mtk_sha *sha,
+ struct mtk_sha_reqctx *ctx)
+{
+ struct mtk_sha_info *info = sha->info;
+ struct mtk_sha_ct *ct = &info->ct;
+ struct mtk_sha_tfm *tfm = &info->tfm;
+
+ sha->ct_hdr = SHA_CT_CTRL_HDR;
+ sha->ct_size = SHA_CT_SIZE;
+
+ tfm->tfm_ctrl0 = SHA_TFM_HASH | SHA_TFM_DIG_TYPE |
+ SHA_TFM_SIZE(WORD(ctx->ds));
+
+ switch (ctx->flags & SHA_FLAGS_ALGO_MASK) {
+ case SHA_FLAGS_SHA1:
+ tfm->tfm_ctrl0 |= SHA_TFM_SHA1;
+ break;
+ case SHA_FLAGS_SHA224:
+ tfm->tfm_ctrl0 |= SHA_TFM_SHA224;
+ break;
+ case SHA_FLAGS_SHA256:
+ tfm->tfm_ctrl0 |= SHA_TFM_SHA256;
+ break;
+ case SHA_FLAGS_SHA384:
+ tfm->tfm_ctrl0 |= SHA_TFM_SHA384;
+ break;
+ case SHA_FLAGS_SHA512:
+ tfm->tfm_ctrl0 |= SHA_TFM_SHA512;
+ break;
+
+ default:
+ /* Should not happen... */
+ return;
+ }
+
+ tfm->tfm_ctrl1 = SHA_TFM_HASH_STORE;
+ ct->tfm_ctrl0 = tfm->tfm_ctrl0 | SHA_TFM_CONTINUE | SHA_TFM_START;
+ ct->tfm_ctrl1 = tfm->tfm_ctrl1;
+
+ ct->ct_ctrl0 = SHA_COMMAND0;
+ ct->ct_ctrl1 = SHA_COMMAND1;
+ ct->ct_ctrl2 = SHA_COMMAND2 | SHA_TFM_DIGEST(WORD(ctx->ds));
+}
+
+static int mtk_sha_info_map(struct mtk_cryp *cryp,
+ struct mtk_sha *sha, size_t len)
+{
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(sha->req);
+ struct mtk_sha_info *info = sha->info;
+ struct mtk_sha_ct *ct = &info->ct;
+
+ if (ctx->start)
+ ctx->start = false;
+ else
+ ct->tfm_ctrl0 &= ~SHA_TFM_START;
+
+ sha->ct_hdr = (sha->ct_hdr & ~SHA_DATA_LEN_MSK) | len;
+ ct->ct_ctrl0 = (ct->ct_ctrl0 & ~SHA_DATA_LEN_MSK) | len;
+
+ ctx->digcnt += len;
+
+ sha->ct_dma = dma_map_single(cryp->dev, info, sizeof(*info),
+ DMA_BIDIRECTIONAL);
+ if (unlikely(dma_mapping_error(cryp->dev, sha->ct_dma))) {
+ dev_err(cryp->dev, "dma %d bytes error\n", sizeof(*info));
+ return -EINVAL;
+ }
+ sha->tfm_dma = sha->ct_dma + sizeof(*ct);
+
+ return 0;
+}
+
+static int mtk_sha_finish_hmac(struct ahash_request *req)
+{
+ struct mtk_sha_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
+ struct mtk_sha_hmac_ctx *bctx = tctx->base;
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(req);
+
+ SHASH_DESC_ON_STACK(shash, bctx->shash);
+
+ shash->tfm = bctx->shash;
+ shash->flags = 0; /* not CRYPTO_TFM_REQ_MAY_SLEEP */
+
+ return crypto_shash_init(shash) ?:
+ crypto_shash_update(shash, bctx->opad, ctx->bs) ?:
+ crypto_shash_finup(shash, req->result, ctx->ds, req->result);
+}
+
+static int mtk_sha_init(struct ahash_request *req)
+{
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+ struct mtk_sha_ctx *tctx = crypto_ahash_ctx(tfm);
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(req);
+
+ ctx->flags = 0;
+ ctx->ds = crypto_ahash_digestsize(tfm);
+
+ switch (ctx->ds) {
+ case SHA1_DIGEST_SIZE:
+ ctx->flags |= SHA_FLAGS_SHA1;
+ ctx->bs = SHA1_BLOCK_SIZE;
+ break;
+ case SHA224_DIGEST_SIZE:
+ ctx->flags |= SHA_FLAGS_SHA224;
+ ctx->bs = SHA224_BLOCK_SIZE;
+ break;
+ case SHA256_DIGEST_SIZE:
+ ctx->flags |= SHA_FLAGS_SHA256;
+ ctx->bs = SHA256_BLOCK_SIZE;
+ break;
+ case SHA384_DIGEST_SIZE:
+ ctx->flags |= SHA_FLAGS_SHA384;
+ ctx->bs = SHA384_BLOCK_SIZE;
+ break;
+ case SHA512_DIGEST_SIZE:
+ ctx->flags |= SHA_FLAGS_SHA512;
+ ctx->bs = SHA512_BLOCK_SIZE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ctx->bufcnt = 0;
+ ctx->digcnt = 0;
+ ctx->buffer = tctx->buf;
+ ctx->start = true;
+
+ if (tctx->flags & SHA_FLAGS_HMAC) {
+ struct mtk_sha_hmac_ctx *bctx = tctx->base;
+
+ memcpy(ctx->buffer, bctx->ipad, ctx->bs);
+ ctx->bufcnt = ctx->bs;
+ ctx->flags |= SHA_FLAGS_HMAC;
+ }
+
+ return 0;
+}
+
+static int mtk_sha_xmit(struct mtk_cryp *cryp, struct mtk_sha *sha,
+ dma_addr_t addr, size_t len)
+{
+ struct mtk_ring *ring = cryp->ring[sha->id];
+ struct mtk_desc *cmd = ring->cmd_base + ring->pos;
+ struct mtk_desc *res = ring->res_base + ring->pos;
+ int err;
+
+ err = mtk_sha_info_map(cryp, sha, len);
+ if (err)
+ return err;
+
+ res->hdr = MTK_DESC_FIRST | MTK_DESC_LAST |
+ MTK_DESC_BUF_LEN(len);
+
+ res->buf = cryp->tmp_dma;
+
+ cmd->hdr = MTK_DESC_FIRST | MTK_DESC_LAST |
+ MTK_DESC_BUF_LEN(len) |
+ MTK_DESC_CT_LEN(sha->ct_size);
+
+ cmd->buf = addr;
+ cmd->ct = sha->ct_dma;
+ cmd->ct_hdr = sha->ct_hdr;
+ cmd->tfm = sha->tfm_dma;
+
+ if (++ring->pos == MTK_MAX_DESC_NUM)
+ ring->pos = 0;
+
+ /* make sure all descriptor are filled done */
+ wmb();
+ mtk_sha_write(cryp, RDR_PREP_COUNT(sha->id), MTK_DESC_CNT(1));
+ mtk_sha_write(cryp, CDR_PREP_COUNT(sha->id), MTK_DESC_CNT(1));
+
+ return -EINPROGRESS;
+}
+
+static int mtk_sha_xmit2(struct mtk_cryp *cryp, struct mtk_sha *sha,
+ struct mtk_sha_reqctx *ctx, size_t len1, size_t len2)
+{
+ struct mtk_ring *ring = cryp->ring[sha->id];
+ struct mtk_desc *cmd = ring->cmd_base + ring->pos;
+ struct mtk_desc *res = ring->res_base + ring->pos;
+ int err;
+
+ err = mtk_sha_info_map(cryp, sha, len1 + len2);
+ if (err)
+ return err;
+
+ res->hdr = MTK_DESC_BUF_LEN(len1) | MTK_DESC_FIRST;
+ res->buf = cryp->tmp_dma;
+
+ cmd->hdr = MTK_DESC_BUF_LEN(len1) | MTK_DESC_FIRST |
+ MTK_DESC_CT_LEN(sha->ct_size);
+ cmd->buf = sg_dma_address(ctx->sg);
+ cmd->ct = sha->ct_dma;
+ cmd->ct_hdr = sha->ct_hdr;
+ cmd->tfm = sha->tfm_dma;
+
+ if (++ring->pos == MTK_MAX_DESC_NUM)
+ ring->pos = 0;
+
+ cmd = ring->cmd_base + ring->pos;
+ res = ring->res_base + ring->pos;
+
+ res->hdr = MTK_DESC_BUF_LEN(len2) | MTK_DESC_LAST;
+ res->buf = cryp->tmp_dma;
+
+ cmd->hdr = MTK_DESC_BUF_LEN(len2) | MTK_DESC_LAST;
+ cmd->buf = ctx->dma_addr;
+
+ if (++ring->pos == MTK_MAX_DESC_NUM)
+ ring->pos = 0;
+
+ /* make sure all descriptor are filled done */
+ wmb();
+ mtk_sha_write(cryp, RDR_PREP_COUNT(sha->id), MTK_DESC_CNT(2));
+ mtk_sha_write(cryp, CDR_PREP_COUNT(sha->id), MTK_DESC_CNT(2));
+
+ return -EINPROGRESS;
+}
+
+static int mtk_sha_dma_map(struct mtk_cryp *cryp, struct mtk_sha *sha,
+ struct mtk_sha_reqctx *ctx, size_t count)
+{
+ ctx->dma_addr = dma_map_single(cryp->dev, ctx->buffer,
+ SHA_BUFFER_LEN, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(cryp->dev, ctx->dma_addr))) {
+ dev_err(cryp->dev, "dma map error\n");
+ return -EINVAL;
+ }
+
+ ctx->flags &= ~SHA_FLAGS_SG;
+
+ return mtk_sha_xmit(cryp, sha, ctx->dma_addr, count);
+}
+
+static int mtk_sha_update_slow(struct mtk_cryp *cryp, struct mtk_sha *sha)
+{
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(sha->req);
+ size_t count;
+ u32 final;
+
+ mtk_sha_append_sg(ctx);
+
+ final = (ctx->flags & SHA_FLAGS_FINUP) && !ctx->total;
+
+ dev_dbg(cryp->dev, "slow: bufcnt: %u\n", ctx->bufcnt);
+
+ if (final) {
+ sha->flags |= SHA_FLAGS_FINAL;
+ mtk_sha_fill_padding(ctx, 0);
+ }
+
+ if (final || (ctx->bufcnt == SHA_BUFFER_LEN && ctx->total)) {
+ count = ctx->bufcnt;
+ ctx->bufcnt = 0;
+
+ return mtk_sha_dma_map(cryp, sha, ctx, count);
+ }
+ return 0;
+}
+
+static int mtk_sha_update_req(struct mtk_cryp *cryp, struct mtk_sha *sha)
+{
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(sha->req);
+ u32 len, final, tail;
+ struct scatterlist *sg;
+
+ if (!ctx->total)
+ return 0;
+
+ if (ctx->bufcnt || ctx->offset)
+ return mtk_sha_update_slow(cryp, sha);
+
+ sg = ctx->sg;
+
+ if (!IS_ALIGNED(sg->offset, sizeof(u32)))
+ return mtk_sha_update_slow(cryp, sha);
+
+ if (!sg_is_last(sg) && !IS_ALIGNED(sg->length, ctx->bs))
+ /* size is not bs aligned */
+ return mtk_sha_update_slow(cryp, sha);
+
+ len = min(ctx->total, sg->length);
+
+ if (sg_is_last(sg)) {
+ if (!(ctx->flags & SHA_FLAGS_FINUP)) {
+ /* not last sg must be bs aligned */
+ tail = len & (ctx->bs - 1);
+ len -= tail;
+ }
+ }
+
+ ctx->total -= len;
+ ctx->offset = len; /* offset where to start slow */
+
+ final = (ctx->flags & SHA_FLAGS_FINUP) && !ctx->total;
+
+ /* Add padding */
+ if (final) {
+ size_t count;
+
+ tail = len & (ctx->bs - 1);
+ len -= tail;
+ ctx->total += tail;
+ ctx->offset = len; /* offset where to start slow */
+
+ sg = ctx->sg;
+ mtk_sha_append_sg(ctx);
+ mtk_sha_fill_padding(ctx, len);
+
+ ctx->dma_addr = dma_map_single(cryp->dev, ctx->buffer,
+ SHA_BUFFER_LEN, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(cryp->dev, ctx->dma_addr))) {
+ dev_err(cryp->dev, "dma map bytes error\n");
+ return -EINVAL;
+ }
+
+ sha->flags |= SHA_FLAGS_FINAL;
+ count = ctx->bufcnt;
+ ctx->bufcnt = 0;
+
+ if (len == 0) {
+ ctx->flags &= ~SHA_FLAGS_SG;
+ return mtk_sha_xmit(cryp, sha, ctx->dma_addr, count);
+
+ } else {
+ ctx->sg = sg;
+ if (!dma_map_sg(cryp->dev, ctx->sg, 1, DMA_TO_DEVICE)) {
+ dev_err(cryp->dev, "dma_map_sg error\n");
+ return -EINVAL;
+ }
+
+ ctx->flags |= SHA_FLAGS_SG;
+ return mtk_sha_xmit2(cryp, sha, ctx, len, count);
+ }
+ }
+
+ if (!dma_map_sg(cryp->dev, ctx->sg, 1, DMA_TO_DEVICE)) {
+ dev_err(cryp->dev, "dma_map_sg error\n");
+ return -EINVAL;
+ }
+
+ ctx->flags |= SHA_FLAGS_SG;
+
+ return mtk_sha_xmit(cryp, sha, sg_dma_address(ctx->sg), len);
+}
+
+static int mtk_sha_final_req(struct mtk_cryp *cryp, struct mtk_sha *sha)
+{
+ struct ahash_request *req = sha->req;
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(req);
+ size_t count;
+
+ mtk_sha_fill_padding(ctx, 0);
+
+ sha->flags |= SHA_FLAGS_FINAL;
+ count = ctx->bufcnt;
+ ctx->bufcnt = 0;
+
+ return mtk_sha_dma_map(cryp, sha, ctx, count);
+}
+
+static int mtk_sha_finish(struct ahash_request *req)
+{
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(req);
+ u8 *digest = ctx->info.tfm.digest;
+
+ memcpy(req->result, digest, ctx->ds);
+
+ if (ctx->flags & SHA_FLAGS_HMAC)
+ return mtk_sha_finish_hmac(req);
+
+ return 0;
+}
+
+static void mtk_sha_finish_req(struct mtk_cryp *cryp,
+ struct mtk_sha *sha, int err)
+{
+ if (likely(!err && (SHA_FLAGS_FINAL & sha->flags)))
+ err = mtk_sha_finish(sha->req);
+
+ sha->flags &= ~(SHA_FLAGS_BUSY | SHA_FLAGS_FINAL);
+
+ sha->req->base.complete(&sha->req->base, err);
+ mtk_sha_handle_queue(cryp, sha->id - RING2, NULL);
+}
+
+static int mtk_sha_handle_queue(struct mtk_cryp *cryp, u8 id,
+ struct ahash_request *req)
+{
+ struct mtk_sha *sha = cryp->sha[id];
+ struct crypto_async_request *async_req, *backlog;
+ struct mtk_sha_reqctx *ctx;
+ unsigned long flags;
+ int err = 0, ret = 0;
+
+ spin_lock_irqsave(&sha->lock, flags);
+ if (req)
+ ret = ahash_enqueue_request(&sha->queue, req);
+
+ if (SHA_FLAGS_BUSY & sha->flags) {
+ spin_unlock_irqrestore(&sha->lock, flags);
+ return ret;
+ }
+
+ backlog = crypto_get_backlog(&sha->queue);
+ async_req = crypto_dequeue_request(&sha->queue);
+ if (async_req)
+ sha->flags |= SHA_FLAGS_BUSY;
+ spin_unlock_irqrestore(&sha->lock, flags);
+
+ if (!async_req)
+ return ret;
+
+ if (backlog)
+ backlog->complete(backlog, -EINPROGRESS);
+
+ req = ahash_request_cast(async_req);
+ ctx = ahash_request_ctx(req);
+
+ sha->req = req;
+ sha->info = &ctx->info;
+
+ mtk_sha_info_init(sha, ctx);
+
+ if (ctx->op == SHA_OP_UPDATE) {
+ err = mtk_sha_update_req(cryp, sha);
+ if (err != -EINPROGRESS && (ctx->flags & SHA_FLAGS_FINUP))
+ /* no final() after finup() */
+ err = mtk_sha_final_req(cryp, sha);
+ } else if (ctx->op == SHA_OP_FINAL) {
+ err = mtk_sha_final_req(cryp, sha);
+ }
+
+ if (unlikely(err != -EINPROGRESS))
+ /* task will not finish it, so do it here */
+ mtk_sha_finish_req(cryp, sha, err);
+
+ return ret;
+}
+
+static int mtk_sha_enqueue(struct ahash_request *req, u32 op)
+{
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(req);
+ struct mtk_sha_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
+
+ ctx->op = op;
+
+ return mtk_sha_handle_queue(tctx->cryp, tctx->id, req);
+}
+
+static void mtk_sha_unmap(struct mtk_cryp *cryp, struct mtk_sha *sha)
+{
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(sha->req);
+
+ dma_unmap_single(cryp->dev, sha->ct_dma,
+ sizeof(struct mtk_sha_info), DMA_BIDIRECTIONAL);
+
+ if (ctx->flags & SHA_FLAGS_SG) {
+ dma_unmap_sg(cryp->dev, ctx->sg, 1, DMA_TO_DEVICE);
+ if (ctx->sg->length == ctx->offset) {
+ ctx->sg = sg_next(ctx->sg);
+ if (ctx->sg)
+ ctx->offset = 0;
+ }
+ if (ctx->flags & SHA_FLAGS_PAD) {
+ dma_unmap_single(cryp->dev, ctx->dma_addr,
+ SHA_BUFFER_LEN, DMA_TO_DEVICE);
+ }
+ } else
+ dma_unmap_single(cryp->dev, ctx->dma_addr,
+ SHA_BUFFER_LEN, DMA_TO_DEVICE);
+}
+
+static void mtk_sha_complete(struct mtk_cryp *cryp, struct mtk_sha *sha)
+{
+ int err = 0;
+
+ err = mtk_sha_update_req(cryp, sha);
+ if (err != -EINPROGRESS)
+ mtk_sha_finish_req(cryp, sha, err);
+}
+
+static int mtk_sha_update(struct ahash_request *req)
+{
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(req);
+
+ ctx->total = req->nbytes;
+ ctx->sg = req->src;
+ ctx->offset = 0;
+
+ if ((ctx->bufcnt + ctx->total < SHA_BUFFER_LEN) &&
+ !(ctx->flags & SHA_FLAGS_FINUP))
+ return mtk_sha_append_sg(ctx);
+
+ return mtk_sha_enqueue(req, SHA_OP_UPDATE);
+}
+
+static int mtk_sha_final(struct ahash_request *req)
+{
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(req);
+
+ ctx->flags |= SHA_FLAGS_FINUP;
+
+ if (ctx->flags & SHA_FLAGS_PAD)
+ return mtk_sha_finish(req);
+
+ return mtk_sha_enqueue(req, SHA_OP_FINAL);
+}
+
+static int mtk_sha_finup(struct ahash_request *req)
+{
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(req);
+ int err1, err2;
+
+ ctx->flags |= SHA_FLAGS_FINUP;
+
+ err1 = mtk_sha_update(req);
+ if (err1 == -EINPROGRESS || err1 == -EBUSY)
+ return err1;
+ /*
+ * final() has to be always called to cleanup resources
+ * even if update() failed
+ */
+ err2 = mtk_sha_final(req);
+
+ return err1 ?: err2;
+}
+
+static int mtk_sha_digest(struct ahash_request *req)
+{
+ return mtk_sha_init(req) ?: mtk_sha_finup(req);
+}
+
+static int mtk_sha_setkey(struct crypto_ahash *tfm,
+ const unsigned char *key, u32 keylen)
+{
+ struct mtk_sha_ctx *tctx = crypto_ahash_ctx(tfm);
+ struct mtk_sha_hmac_ctx *bctx = tctx->base;
+ size_t bs = crypto_shash_blocksize(bctx->shash);
+ size_t ds = crypto_shash_digestsize(bctx->shash);
+ int err, i;
+
+ SHASH_DESC_ON_STACK(shash, bctx->shash);
+
+ shash->tfm = bctx->shash;
+ shash->flags = crypto_shash_get_flags(bctx->shash) &
+ CRYPTO_TFM_REQ_MAY_SLEEP;
+
+ if (keylen > bs) {
+ err = crypto_shash_digest(shash, key, keylen, bctx->ipad);
+ if (err)
+ return err;
+ keylen = ds;
+ } else {
+ memcpy(bctx->ipad, key, keylen);
+ }
+
+ memset(bctx->ipad + keylen, 0, bs - keylen);
+ memcpy(bctx->opad, bctx->ipad, bs);
+
+ for (i = 0; i < bs; i++) {
+ bctx->ipad[i] ^= 0x36;
+ bctx->opad[i] ^= 0x5c;
+ }
+
+ return err;
+}
+
+static int mtk_sha_export(struct ahash_request *req, void *out)
+{
+ const struct mtk_sha_reqctx *ctx = ahash_request_ctx(req);
+
+ memcpy(out, ctx, sizeof(*ctx));
+ return 0;
+}
+
+static int mtk_sha_import(struct ahash_request *req, const void *in)
+{
+ struct mtk_sha_reqctx *ctx = ahash_request_ctx(req);
+
+ memcpy(ctx, in, sizeof(*ctx));
+ return 0;
+}
+
+static int mtk_sha_cra_init_alg(struct crypto_tfm *tfm,
+ const char *alg_base)
+{
+ struct mtk_sha_ctx *tctx = crypto_tfm_ctx(tfm);
+ struct mtk_cryp *cryp = NULL;
+
+ cryp = mtk_sha_find_dev(tctx);
+ if (!cryp)
+ return -ENODEV;
+
+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+ sizeof(struct mtk_sha_reqctx));
+
+ if (alg_base) {
+ struct mtk_sha_hmac_ctx *bctx = tctx->base;
+
+ tctx->flags |= SHA_FLAGS_HMAC;
+ bctx->shash = crypto_alloc_shash(alg_base, 0,
+ CRYPTO_ALG_NEED_FALLBACK);
+ if (IS_ERR(bctx->shash)) {
+ pr_err("base driver %s could not be loaded.\n",
+ alg_base);
+
+ return PTR_ERR(bctx->shash);
+ }
+ }
+ return 0;
+}
+
+static int mtk_sha_cra_init(struct crypto_tfm *tfm)
+{
+ return mtk_sha_cra_init_alg(tfm, NULL);
+}
+
+static int mtk_sha_cra_sha1_init(struct crypto_tfm *tfm)
+{
+ return mtk_sha_cra_init_alg(tfm, "sha1");
+}
+
+static int mtk_sha_cra_sha224_init(struct crypto_tfm *tfm)
+{
+ return mtk_sha_cra_init_alg(tfm, "sha224");
+}
+
+static int mtk_sha_cra_sha256_init(struct crypto_tfm *tfm)
+{
+ return mtk_sha_cra_init_alg(tfm, "sha256");
+}
+
+static int mtk_sha_cra_sha384_init(struct crypto_tfm *tfm)
+{
+ return mtk_sha_cra_init_alg(tfm, "sha384");
+}
+
+static int mtk_sha_cra_sha512_init(struct crypto_tfm *tfm)
+{
+ return mtk_sha_cra_init_alg(tfm, "sha512");
+}
+
+static void mtk_sha_cra_exit(struct crypto_tfm *tfm)
+{
+ struct mtk_sha_ctx *tctx = crypto_tfm_ctx(tfm);
+
+ if (tctx->flags & SHA_FLAGS_HMAC) {
+ struct mtk_sha_hmac_ctx *bctx = tctx->base;
+
+ crypto_free_shash(bctx->shash);
+ }
+}
+
+static struct ahash_alg algs_sha1_sha224_sha256[] = {
+{
+ .init = mtk_sha_init,
+ .update = mtk_sha_update,
+ .final = mtk_sha_final,
+ .finup = mtk_sha_finup,
+ .digest = mtk_sha_digest,
+ .export = mtk_sha_export,
+ .import = mtk_sha_import,
+ .halg.digestsize = SHA1_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct mtk_sha_reqctx),
+ .halg.base = {
+ .cra_name = "sha1",
+ .cra_driver_name = "mtk-sha1",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_ASYNC,
+ .cra_blocksize = SHA1_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mtk_sha_ctx),
+ .cra_alignmask = SHA_ALIGN_MSK,
+ .cra_module = THIS_MODULE,
+ .cra_init = mtk_sha_cra_init,
+ .cra_exit = mtk_sha_cra_exit,
+ }
+},
+{
+ .init = mtk_sha_init,
+ .update = mtk_sha_update,
+ .final = mtk_sha_final,
+ .finup = mtk_sha_finup,
+ .digest = mtk_sha_digest,
+ .export = mtk_sha_export,
+ .import = mtk_sha_import,
+ .halg.digestsize = SHA224_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct mtk_sha_reqctx),
+ .halg.base = {
+ .cra_name = "sha224",
+ .cra_driver_name = "mtk-sha224",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_ASYNC,
+ .cra_blocksize = SHA224_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mtk_sha_ctx),
+ .cra_alignmask = SHA_ALIGN_MSK,
+ .cra_module = THIS_MODULE,
+ .cra_init = mtk_sha_cra_init,
+ .cra_exit = mtk_sha_cra_exit,
+ }
+},
+{
+ .init = mtk_sha_init,
+ .update = mtk_sha_update,
+ .final = mtk_sha_final,
+ .finup = mtk_sha_finup,
+ .digest = mtk_sha_digest,
+ .export = mtk_sha_export,
+ .import = mtk_sha_import,
+ .halg.digestsize = SHA256_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct mtk_sha_reqctx),
+ .halg.base = {
+ .cra_name = "sha256",
+ .cra_driver_name = "mtk-sha256",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_ASYNC,
+ .cra_blocksize = SHA256_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mtk_sha_ctx),
+ .cra_alignmask = SHA_ALIGN_MSK,
+ .cra_module = THIS_MODULE,
+ .cra_init = mtk_sha_cra_init,
+ .cra_exit = mtk_sha_cra_exit,
+ }
+},
+{
+ .init = mtk_sha_init,
+ .update = mtk_sha_update,
+ .final = mtk_sha_final,
+ .finup = mtk_sha_finup,
+ .digest = mtk_sha_digest,
+ .export = mtk_sha_export,
+ .import = mtk_sha_import,
+ .setkey = mtk_sha_setkey,
+ .halg.digestsize = SHA1_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct mtk_sha_reqctx),
+ .halg.base = {
+ .cra_name = "hmac(sha1)",
+ .cra_driver_name = "mtk-hmac-sha1",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = SHA1_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mtk_sha_ctx) +
+ sizeof(struct mtk_sha_hmac_ctx),
+ .cra_alignmask = SHA_ALIGN_MSK,
+ .cra_module = THIS_MODULE,
+ .cra_init = mtk_sha_cra_sha1_init,
+ .cra_exit = mtk_sha_cra_exit,
+ }
+},
+{
+ .init = mtk_sha_init,
+ .update = mtk_sha_update,
+ .final = mtk_sha_final,
+ .finup = mtk_sha_finup,
+ .digest = mtk_sha_digest,
+ .export = mtk_sha_export,
+ .import = mtk_sha_import,
+ .setkey = mtk_sha_setkey,
+ .halg.digestsize = SHA224_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct mtk_sha_reqctx),
+ .halg.base = {
+ .cra_name = "hmac(sha224)",
+ .cra_driver_name = "mtk-hmac-sha224",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = SHA224_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mtk_sha_ctx) +
+ sizeof(struct mtk_sha_hmac_ctx),
+ .cra_alignmask = SHA_ALIGN_MSK,
+ .cra_module = THIS_MODULE,
+ .cra_init = mtk_sha_cra_sha224_init,
+ .cra_exit = mtk_sha_cra_exit,
+ }
+},
+{
+ .init = mtk_sha_init,
+ .update = mtk_sha_update,
+ .final = mtk_sha_final,
+ .finup = mtk_sha_finup,
+ .digest = mtk_sha_digest,
+ .export = mtk_sha_export,
+ .import = mtk_sha_import,
+ .setkey = mtk_sha_setkey,
+ .halg.digestsize = SHA256_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct mtk_sha_reqctx),
+ .halg.base = {
+ .cra_name = "hmac(sha256)",
+ .cra_driver_name = "mtk-hmac-sha256",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = SHA256_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mtk_sha_ctx) +
+ sizeof(struct mtk_sha_hmac_ctx),
+ .cra_alignmask = SHA_ALIGN_MSK,
+ .cra_module = THIS_MODULE,
+ .cra_init = mtk_sha_cra_sha256_init,
+ .cra_exit = mtk_sha_cra_exit,
+ }
+},
+};
+
+static struct ahash_alg algs_sha384_sha512[] = {
+{
+ .init = mtk_sha_init,
+ .update = mtk_sha_update,
+ .final = mtk_sha_final,
+ .finup = mtk_sha_finup,
+ .digest = mtk_sha_digest,
+ .export = mtk_sha_export,
+ .import = mtk_sha_import,
+ .halg.digestsize = SHA384_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct mtk_sha_reqctx),
+ .halg.base = {
+ .cra_name = "sha384",
+ .cra_driver_name = "mtk-sha384",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_ASYNC,
+ .cra_blocksize = SHA384_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mtk_sha_ctx),
+ .cra_alignmask = SHA_ALIGN_MSK,
+ .cra_module = THIS_MODULE,
+ .cra_init = mtk_sha_cra_init,
+ .cra_exit = mtk_sha_cra_exit,
+ }
+},
+{
+ .init = mtk_sha_init,
+ .update = mtk_sha_update,
+ .final = mtk_sha_final,
+ .finup = mtk_sha_finup,
+ .digest = mtk_sha_digest,
+ .export = mtk_sha_export,
+ .import = mtk_sha_import,
+ .halg.digestsize = SHA512_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct mtk_sha_reqctx),
+ .halg.base = {
+ .cra_name = "sha512",
+ .cra_driver_name = "mtk-sha512",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_ASYNC,
+ .cra_blocksize = SHA512_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mtk_sha_ctx),
+ .cra_alignmask = SHA_ALIGN_MSK,
+ .cra_module = THIS_MODULE,
+ .cra_init = mtk_sha_cra_init,
+ .cra_exit = mtk_sha_cra_exit,
+ }
+},
+{
+ .init = mtk_sha_init,
+ .update = mtk_sha_update,
+ .final = mtk_sha_final,
+ .finup = mtk_sha_finup,
+ .digest = mtk_sha_digest,
+ .export = mtk_sha_export,
+ .import = mtk_sha_import,
+ .setkey = mtk_sha_setkey,
+ .halg.digestsize = SHA384_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct mtk_sha_reqctx),
+ .halg.base = {
+ .cra_name = "hmac(sha384)",
+ .cra_driver_name = "mtk-hmac-sha384",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = SHA384_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mtk_sha_ctx) +
+ sizeof(struct mtk_sha_hmac_ctx),
+ .cra_alignmask = SHA_ALIGN_MSK,
+ .cra_module = THIS_MODULE,
+ .cra_init = mtk_sha_cra_sha384_init,
+ .cra_exit = mtk_sha_cra_exit,
+ }
+},
+{
+ .init = mtk_sha_init,
+ .update = mtk_sha_update,
+ .final = mtk_sha_final,
+ .finup = mtk_sha_finup,
+ .digest = mtk_sha_digest,
+ .export = mtk_sha_export,
+ .import = mtk_sha_import,
+ .setkey = mtk_sha_setkey,
+ .halg.digestsize = SHA512_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct mtk_sha_reqctx),
+ .halg.base = {
+ .cra_name = "hmac(sha512)",
+ .cra_driver_name = "mtk-hmac-sha512",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = SHA512_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mtk_sha_ctx) +
+ sizeof(struct mtk_sha_hmac_ctx),
+ .cra_alignmask = SHA_ALIGN_MSK,
+ .cra_module = THIS_MODULE,
+ .cra_init = mtk_sha_cra_sha512_init,
+ .cra_exit = mtk_sha_cra_exit,
+ }
+},
+};
+
+static void mtk_sha_task0(unsigned long data)
+{
+ struct mtk_cryp *cryp = (struct mtk_cryp *)data;
+ struct mtk_sha *sha = cryp->sha[0];
+
+ mtk_sha_unmap(cryp, sha);
+ mtk_sha_complete(cryp, sha);
+}
+
+static void mtk_sha_task1(unsigned long data)
+{
+ struct mtk_cryp *cryp = (struct mtk_cryp *)data;
+ struct mtk_sha *sha = cryp->sha[1];
+
+ mtk_sha_unmap(cryp, sha);
+ mtk_sha_complete(cryp, sha);
+}
+
+static irqreturn_t mtk_sha_ring2_irq(int irq, void *dev_id)
+{
+ struct mtk_cryp *cryp = (struct mtk_cryp *)dev_id;
+ struct mtk_sha *sha = cryp->sha[0];
+ u32 val = mtk_sha_read(cryp, RDR_STAT(RING2));
+
+ mtk_sha_write(cryp, RDR_STAT(RING2), val);
+
+ if (likely((SHA_FLAGS_BUSY & sha->flags))) {
+ mtk_sha_write(cryp, RDR_PROC_COUNT(RING2), MTK_DESC_CNT_CLR);
+ mtk_sha_write(cryp, RDR_THRESH(RING2), MTK_RDR_THRESH_DEF);
+
+ tasklet_schedule(&sha->task);
+ } else {
+ dev_warn(cryp->dev, "AES interrupt when no active requests.\n");
+ }
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mtk_sha_ring3_irq(int irq, void *dev_id)
+{
+ struct mtk_cryp *cryp = (struct mtk_cryp *)dev_id;
+ struct mtk_sha *sha = cryp->sha[1];
+ u32 val = mtk_sha_read(cryp, RDR_STAT(RING3));
+
+ mtk_sha_write(cryp, RDR_STAT(RING3), val);
+
+ if (likely((SHA_FLAGS_BUSY & sha->flags))) {
+ mtk_sha_write(cryp, RDR_PROC_COUNT(RING3), MTK_DESC_CNT_CLR);
+ mtk_sha_write(cryp, RDR_THRESH(RING3), MTK_RDR_THRESH_DEF);
+
+ tasklet_schedule(&sha->task);
+ } else {
+ dev_warn(cryp->dev, "AES interrupt when no active requests.\n");
+ }
+ return IRQ_HANDLED;
+}
+
+static int mtk_sha_record_init(struct mtk_cryp *cryp)
+{
+ struct mtk_sha **sha = cryp->sha;
+ int i, err = -ENOMEM;
+
+ for (i = 0; i < RECORD_NUM; i++) {
+ sha[i] = kzalloc(sizeof(**sha), GFP_KERNEL);
+ if (!sha[i])
+ goto err_cleanup;
+
+ sha[i]->id = i + RING2;
+
+ spin_lock_init(&sha[i]->lock);
+ crypto_init_queue(&sha[i]->queue, SHA_QUEUE_SIZE);
+ }
+
+ tasklet_init(&sha[0]->task, mtk_sha_task0, (unsigned long)cryp);
+ tasklet_init(&sha[1]->task, mtk_sha_task1, (unsigned long)cryp);
+
+ cryp->rec = 1;
+
+ return 0;
+
+err_cleanup:
+ for (; i--; )
+ kfree(sha[i]);
+ return err;
+}
+
+static void mtk_sha_record_free(struct mtk_cryp *cryp)
+{
+ int i;
+
+ for (i = 0; i < RECORD_NUM; i++) {
+ tasklet_kill(&cryp->sha[i]->task);
+ kfree(cryp->sha[i]);
+ }
+}
+
+static void mtk_sha_unregister_algs(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(algs_sha1_sha224_sha256); i++)
+ crypto_unregister_ahash(&algs_sha1_sha224_sha256[i]);
+
+ for (i = 0; i < ARRAY_SIZE(algs_sha384_sha512); i++)
+ crypto_unregister_ahash(&algs_sha384_sha512[i]);
+}
+
+static int mtk_sha_register_algs(void)
+{
+ int err, i;
+
+ for (i = 0; i < ARRAY_SIZE(algs_sha1_sha224_sha256); i++) {
+ err = crypto_register_ahash(&algs_sha1_sha224_sha256[i]);
+ if (err)
+ goto err_sha_224_256_algs;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(algs_sha384_sha512); i++) {
+ err = crypto_register_ahash(&algs_sha384_sha512[i]);
+ if (err)
+ goto err_sha_384_512_algs;
+ }
+
+ return 0;
+
+err_sha_384_512_algs:
+ for (; i--; )
+ crypto_unregister_ahash(&algs_sha384_sha512[i]);
+ i = ARRAY_SIZE(algs_sha1_sha224_sha256);
+err_sha_224_256_algs:
+ for (; i--; )
+ crypto_unregister_ahash(&algs_sha1_sha224_sha256[i]);
+
+ return err;
+}
+
+int mtk_hash_alg_register(struct mtk_cryp *cryp)
+{
+ int err;
+
+ INIT_LIST_HEAD(&cryp->sha_list);
+
+ err = mtk_sha_record_init(cryp);
+ if (err)
+ goto err_record;
+
+ err = devm_request_irq(cryp->dev, cryp->irq[RING2],
+ mtk_sha_ring2_irq, IRQF_TRIGGER_LOW,
+ "mtk-sha", cryp);
+ if (err) {
+ dev_err(cryp->dev, "unable to request sha irq0.\n");
+ goto err_res;
+ }
+
+ err = devm_request_irq(cryp->dev, cryp->irq[RING3],
+ mtk_sha_ring3_irq, IRQF_TRIGGER_LOW,
+ "mtk-sha", cryp);
+ if (err) {
+ dev_err(cryp->dev, "unable to request sha irq1.\n");
+ goto err_res;
+ }
+
+ /* enable ring2 and ring3 interrupt for hash */
+ mtk_sha_write(cryp, AIC_ENABLE_SET(RING2), MTK_IRQ_RDR2);
+ mtk_sha_write(cryp, AIC_ENABLE_SET(RING3), MTK_IRQ_RDR3);
+
+ cryp->tmp = dma_alloc_coherent(cryp->dev, SHA_TMP_STATE_SIZE,
+ &cryp->tmp_dma, GFP_KERNEL);
+ if (!cryp->tmp) {
+ dev_err(cryp->dev, "unable to allocate tmp buffer.\n");
+ err = -EINVAL;
+ goto err_res;
+ }
+
+ spin_lock(&mtk_sha.lock);
+ list_add_tail(&cryp->sha_list, &mtk_sha.dev_list);
+ spin_unlock(&mtk_sha.lock);
+
+ err = mtk_sha_register_algs();
+ if (err)
+ goto err_algs;
+
+ return 0;
+
+err_algs:
+ spin_lock(&mtk_sha.lock);
+ list_del(&cryp->sha_list);
+ spin_unlock(&mtk_sha.lock);
+ dma_free_coherent(cryp->dev, SHA_TMP_STATE_SIZE,
+ cryp->tmp, cryp->tmp_dma);
+err_res:
+ mtk_sha_record_free(cryp);
+err_record:
+
+ dev_err(cryp->dev, "mtk-sha initialization failed.\n");
+ return err;
+}
+EXPORT_SYMBOL(mtk_hash_alg_register);
+
+void mtk_hash_alg_release(struct mtk_cryp *cryp)
+{
+ spin_lock(&mtk_sha.lock);
+ list_del(&cryp->sha_list);
+ spin_unlock(&mtk_sha.lock);
+
+ mtk_sha_unregister_algs();
+ dma_free_coherent(cryp->dev, SHA_TMP_STATE_SIZE,
+ cryp->tmp, cryp->tmp_dma);
+ mtk_sha_record_free(cryp);
+}
+EXPORT_SYMBOL(mtk_hash_alg_release);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 0/2] Add MediaTek crypto acclelrator driver
From: Ryder Lee @ 2016-12-02 3:26 UTC (permalink / raw)
To: Herbert Xu, David S. Miller, Matthias Brugger
Cc: devicetree, linux-mediatek, linux-kernel, linux-crypto,
linux-arm-kernel, Sean Wang, Ryder Lee
This adds support for the MediaTek hardware accelerator on
mt7623 SoC.
This driver currently implement:
- SHA1 and SHA2 family(HMAC) hash alogrithms.
- AES block cipher in CBC/ECB mode with 128/196/256 bits keys.
Ryder Lee (2):
Add crypto driver support for some MediaTek chips
crypto: mediatek - add DT bindings documentation
.../devicetree/bindings/crypto/mediatek-crypto.txt | 32 +
drivers/crypto/Kconfig | 17 +
drivers/crypto/Makefile | 1 +
drivers/crypto/mediatek/Makefile | 2 +
drivers/crypto/mediatek/mtk-aes.c | 734 +++++++++++
drivers/crypto/mediatek/mtk-platform.c | 575 ++++++++
drivers/crypto/mediatek/mtk-platform.h | 230 ++++
drivers/crypto/mediatek/mtk-regs.h | 194 +++
drivers/crypto/mediatek/mtk-sha.c | 1384 ++++++++++++++++++++
9 files changed, 3169 insertions(+)
create mode 100644 Documentation/devicetree/bindings/crypto/mediatek-crypto.txt
create mode 100644 drivers/crypto/mediatek/Makefile
create mode 100644 drivers/crypto/mediatek/mtk-aes.c
create mode 100644 drivers/crypto/mediatek/mtk-platform.c
create mode 100644 drivers/crypto/mediatek/mtk-platform.h
create mode 100644 drivers/crypto/mediatek/mtk-regs.h
create mode 100644 drivers/crypto/mediatek/mtk-sha.c
--
1.9.1
^ permalink raw reply
* [PATCH v1] mtk-vcodec: use V4L2_DEC_CMD_STOP to implement flush
From: Wu-Cheng Li @ 2016-12-02 2:38 UTC (permalink / raw)
To: tiffany.lin, andrew-ct.chen, mchehab, matthias.bgg
Cc: linux-media, linux-arm-kernel, linux-mediatek, linux-kernel,
djkurtz, pawel, Wu-Cheng Li
In-Reply-To: <1480646314-75478-1-git-send-email-wuchengli@chromium.org>
From: Tiffany Lin <tiffany.lin@mediatek.com>
Also remove the code using size-0 OUTPUT buffer to flush.
Singed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Wu-Cheng Li <wuchengli@chromium.org>
Reviewed-by: Kuang-che Wu <kcwu@chromium.org>
---
drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 151 ++++++++++++++-------
.../media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 14 ++
drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 2 +
3 files changed, 117 insertions(+), 50 deletions(-)
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
index 0746592..407c8ba 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
@@ -351,16 +351,6 @@ static void mtk_vdec_worker(struct work_struct *work)
dst_vb2_v4l2 = container_of(dst_buf, struct vb2_v4l2_buffer, vb2_buf);
dst_buf_info = container_of(dst_vb2_v4l2, struct mtk_video_dec_buf, vb);
- buf.va = vb2_plane_vaddr(src_buf, 0);
- buf.dma_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0);
- buf.size = (size_t)src_buf->planes[0].bytesused;
- if (!buf.va) {
- v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
- mtk_v4l2_err("[%d] id=%d src_addr is NULL!!",
- ctx->id, src_buf->index);
- return;
- }
-
pfb = &dst_buf_info->frame_buffer;
pfb->base_y.va = vb2_plane_vaddr(dst_buf, 0);
pfb->base_y.dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
@@ -371,8 +361,6 @@ static void mtk_vdec_worker(struct work_struct *work)
pfb->base_c.size = ctx->picinfo.c_bs_sz + ctx->picinfo.c_len_sz;
pfb->status = 0;
mtk_v4l2_debug(3, "===>[%d] vdec_if_decode() ===>", ctx->id);
- mtk_v4l2_debug(3, "[%d] Bitstream VA=%p DMA=%pad Size=%zx vb=%p",
- ctx->id, buf.va, &buf.dma_addr, buf.size, src_buf);
mtk_v4l2_debug(3,
"id=%d Framebuf pfb=%p VA=%p Y_DMA=%pad C_DMA=%pad Size=%zx",
@@ -381,24 +369,36 @@ static void mtk_vdec_worker(struct work_struct *work)
&pfb->base_c.dma_addr, pfb->base_y.size);
if (src_buf_info->lastframe) {
- /* update src buf status */
+ mtk_v4l2_debug(1, "Got empty flush input buffer.");
src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
- src_buf_info->lastframe = false;
- v4l2_m2m_buf_done(&src_buf_info->vb, VB2_BUF_STATE_DONE);
/* update dst buf status */
dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
+ mutex_lock(&ctx->lock);
dst_buf_info->used = false;
+ mutex_unlock(&ctx->lock);
vdec_if_decode(ctx, NULL, NULL, &res_chg);
clean_display_buffer(ctx);
vb2_set_plane_payload(&dst_buf_info->vb.vb2_buf, 0, 0);
vb2_set_plane_payload(&dst_buf_info->vb.vb2_buf, 1, 0);
+ dst_vb2_v4l2->flags |= V4L2_BUF_FLAG_LAST;
v4l2_m2m_buf_done(&dst_buf_info->vb, VB2_BUF_STATE_DONE);
clean_free_buffer(ctx);
v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
return;
}
+ buf.va = vb2_plane_vaddr(src_buf, 0);
+ buf.dma_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0);
+ buf.size = (size_t)src_buf->planes[0].bytesused;
+ if (!buf.va) {
+ v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
+ mtk_v4l2_err("[%d] id=%d src_addr is NULL!!",
+ ctx->id, src_buf->index);
+ return;
+ }
+ mtk_v4l2_debug(3, "[%d] Bitstream VA=%p DMA=%pad Size=%zx vb=%p",
+ ctx->id, buf.va, &buf.dma_addr, buf.size, src_buf);
dst_buf_info->vb.vb2_buf.timestamp
= src_buf_info->vb.vb2_buf.timestamp;
dst_buf_info->vb.timecode
@@ -412,10 +412,9 @@ static void mtk_vdec_worker(struct work_struct *work)
if (ret) {
mtk_v4l2_err(
- " <===[%d], src_buf[%d]%d sz=0x%zx pts=%llu dst_buf[%d] vdec_if_decode() ret=%d res_chg=%d===>",
+ " <===[%d], src_buf[%d] sz=0x%zx pts=%llu dst_buf[%d] vdec_if_decode() ret=%d res_chg=%d===>",
ctx->id,
src_buf->index,
- src_buf_info->lastframe,
buf.size,
src_buf_info->vb.vb2_buf.timestamp,
dst_buf->index,
@@ -456,6 +455,65 @@ static void mtk_vdec_worker(struct work_struct *work)
v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
}
+static int vidioc_try_decoder_cmd(struct file *file, void *priv,
+ struct v4l2_decoder_cmd *cmd)
+{
+ switch (cmd->cmd) {
+ case V4L2_DEC_CMD_STOP:
+ case V4L2_DEC_CMD_START:
+ if (cmd->flags != 0) {
+ mtk_v4l2_err("cmd->flags=%u", cmd->flags);
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+
+static int vidioc_decoder_cmd(struct file *file, void *priv,
+ struct v4l2_decoder_cmd *cmd)
+{
+ struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
+ struct vb2_queue *src_vq, *dst_vq;
+ int ret;
+
+ ret = vidioc_try_decoder_cmd(file, priv, cmd);
+ if (ret)
+ return ret;
+
+ mtk_v4l2_debug(1, "decoder cmd=%u", cmd->cmd);
+ dst_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
+ switch (cmd->cmd) {
+ case V4L2_DEC_CMD_STOP:
+ src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
+ V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
+ if (!vb2_is_streaming(src_vq)) {
+ mtk_v4l2_debug(1, "Output stream is off. No need to flush.");
+ return 0;
+ }
+ if (!vb2_is_streaming(dst_vq)) {
+ mtk_v4l2_debug(1, "Capture stream is off. No need to flush.");
+ return 0;
+ }
+ v4l2_m2m_buf_queue(ctx->m2m_ctx, &ctx->empty_flush_buf->vb);
+ v4l2_m2m_try_schedule(ctx->m2m_ctx);
+ break;
+
+ case V4L2_DEC_CMD_START:
+ vb2_clear_last_buffer_dequeued(dst_vq);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
void mtk_vdec_unlock(struct mtk_vcodec_ctx *ctx)
{
mutex_unlock(&ctx->dev->dec_mutex);
@@ -521,10 +579,6 @@ static int vidioc_vdec_qbuf(struct file *file, void *priv,
struct v4l2_buffer *buf)
{
struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
- struct vb2_queue *vq;
- struct vb2_buffer *vb;
- struct mtk_video_dec_buf *mtkbuf;
- struct vb2_v4l2_buffer *vb2_v4l2;
if (ctx->state == MTK_STATE_ABORT) {
mtk_v4l2_err("[%d] Call on QBUF after unrecoverable error",
@@ -532,25 +586,6 @@ static int vidioc_vdec_qbuf(struct file *file, void *priv,
return -EIO;
}
- vq = v4l2_m2m_get_vq(ctx->m2m_ctx, buf->type);
- if (buf->index >= vq->num_buffers) {
- mtk_v4l2_debug(1, "buffer index %d out of range", buf->index);
- return -EINVAL;
- }
- vb = vq->bufs[buf->index];
- vb2_v4l2 = container_of(vb, struct vb2_v4l2_buffer, vb2_buf);
- mtkbuf = container_of(vb2_v4l2, struct mtk_video_dec_buf, vb);
-
- if ((buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) &&
- (buf->m.planes[0].bytesused == 0)) {
- mtkbuf->lastframe = true;
- mtk_v4l2_debug(1, "[%d] (%d) id=%d lastframe=%d (%d,%d, %d) vb=%p",
- ctx->id, buf->type, buf->index,
- mtkbuf->lastframe, buf->bytesused,
- buf->m.planes[0].bytesused, buf->length,
- vb);
- }
-
return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf);
}
@@ -1067,10 +1102,8 @@ static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb)
int ret = 0;
unsigned int dpbsize = 1;
struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
- struct vb2_v4l2_buffer *vb2_v4l2 = container_of(vb,
- struct vb2_v4l2_buffer, vb2_buf);
- struct mtk_video_dec_buf *buf = container_of(vb2_v4l2,
- struct mtk_video_dec_buf, vb);
+ struct vb2_v4l2_buffer *vb2_v4l2 = NULL;
+ struct mtk_video_dec_buf *buf = NULL;
mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p",
ctx->id, vb->vb2_queue->type,
@@ -1079,10 +1112,11 @@ static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb)
* check if this buffer is ready to be used after decode
*/
if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+ vb2_v4l2 = to_vb2_v4l2_buffer(vb);
+ buf = container_of(vb2_v4l2, struct mtk_video_dec_buf, vb);
mutex_lock(&ctx->lock);
if (buf->used == false) {
- v4l2_m2m_buf_queue(ctx->m2m_ctx,
- to_vb2_v4l2_buffer(vb));
+ v4l2_m2m_buf_queue(ctx->m2m_ctx, vb2_v4l2);
buf->queued_in_vb2 = true;
buf->queued_in_v4l2 = true;
buf->ready_to_display = false;
@@ -1095,7 +1129,7 @@ static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb)
return;
}
- v4l2_m2m_buf_queue(ctx->m2m_ctx, vb2_v4l2);
+ v4l2_m2m_buf_queue(ctx->m2m_ctx, to_vb2_v4l2_buffer(vb));
if (ctx->state != MTK_STATE_INIT) {
mtk_v4l2_debug(3, "[%d] already init driver %d",
@@ -1108,6 +1142,14 @@ static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb)
mtk_v4l2_err("No src buffer");
return;
}
+ vb2_v4l2 = to_vb2_v4l2_buffer(src_buf);
+ buf = container_of(vb2_v4l2, struct mtk_video_dec_buf, vb);
+ if (buf->lastframe) {
+ /* This shouldn't happen. Just in case. */
+ mtk_v4l2_err("Invalid flush buffer.");
+ v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
+ return;
+ }
src_mem.va = vb2_plane_vaddr(src_buf, 0);
src_mem.dma_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0);
@@ -1224,9 +1266,15 @@ static void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
ctx->id, q->type, ctx->state, ctx->decoded_frame_cnt);
if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
- while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx)))
- v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf),
- VB2_BUF_STATE_ERROR);
+ while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
+ struct vb2_v4l2_buffer *vb2_v4l2 =
+ to_vb2_v4l2_buffer(src_buf);
+ struct mtk_video_dec_buf *buf_info = container_of(
+ vb2_v4l2, struct mtk_video_dec_buf, vb);
+ if (!buf_info->lastframe)
+ v4l2_m2m_buf_done(vb2_v4l2,
+ VB2_BUF_STATE_ERROR);
+ }
return;
}
@@ -1406,6 +1454,9 @@ const struct v4l2_ioctl_ops mtk_vdec_ioctl_ops = {
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
.vidioc_g_selection = vidioc_vdec_g_selection,
.vidioc_s_selection = vidioc_vdec_s_selection,
+
+ .vidioc_decoder_cmd = vidioc_decoder_cmd,
+ .vidioc_try_decoder_cmd = vidioc_try_decoder_cmd,
};
int mtk_vcodec_dec_queue_init(void *priv, struct vb2_queue *src_vq,
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
index d48287c..4334b73 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
@@ -105,13 +105,21 @@ static int fops_vcodec_open(struct file *file)
{
struct mtk_vcodec_dev *dev = video_drvdata(file);
struct mtk_vcodec_ctx *ctx = NULL;
+ struct mtk_video_dec_buf *mtk_buf = NULL;
int ret = 0;
+ struct vb2_queue *src_vq;
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
+ mtk_buf = kzalloc(sizeof(*mtk_buf), GFP_KERNEL);
+ if (!mtk_buf) {
+ kfree(ctx);
+ return -ENOMEM;
+ }
mutex_lock(&dev->dev_mutex);
+ ctx->empty_flush_buf = mtk_buf;
ctx->id = dev->id_counter++;
v4l2_fh_init(&ctx->fh, video_devdata(file));
file->private_data = &ctx->fh;
@@ -135,6 +143,10 @@ static int fops_vcodec_open(struct file *file)
ret);
goto err_m2m_ctx_init;
}
+ src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
+ V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
+ ctx->empty_flush_buf->vb.vb2_buf.vb2_queue = src_vq;
+ ctx->empty_flush_buf->lastframe = true;
mtk_vcodec_dec_set_default_params(ctx);
if (v4l2_fh_is_singular(&ctx->fh)) {
@@ -173,6 +185,7 @@ static int fops_vcodec_open(struct file *file)
err_ctrls_setup:
v4l2_fh_del(&ctx->fh);
v4l2_fh_exit(&ctx->fh);
+ kfree(ctx->empty_flush_buf);
kfree(ctx);
mutex_unlock(&dev->dev_mutex);
@@ -203,6 +216,7 @@ static int fops_vcodec_release(struct file *file)
v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
list_del_init(&ctx->list);
+ kfree(ctx->empty_flush_buf);
kfree(ctx);
mutex_unlock(&dev->dev_mutex);
return 0;
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index d7eb8ef..3cffb38 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -254,6 +254,7 @@ struct vdec_pic_info {
* @decode_work: worker for the decoding
* @encode_work: worker for the encoding
* @last_decoded_picinfo: pic information get from latest decode
+ * @empty_flush_buf: a fake size-0 capture buffer that indicates flush
*
* @colorspace: enum v4l2_colorspace; supplemental to pixelformat
* @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding
@@ -291,6 +292,7 @@ struct mtk_vcodec_ctx {
struct work_struct decode_work;
struct work_struct encode_work;
struct vdec_pic_info last_decoded_picinfo;
+ struct mtk_video_dec_buf *empty_flush_buf;
enum v4l2_colorspace colorspace;
enum v4l2_ycbcr_encoding ycbcr_enc;
--
2.8.0.rc3.226.g39d4020
^ permalink raw reply related
* [PATCH v1] mtk-vcodec: use V4L2_DEC_CMD_STOP to implement flush
From: Wu-Cheng Li @ 2016-12-02 2:38 UTC (permalink / raw)
To: tiffany.lin, andrew-ct.chen, mchehab, matthias.bgg
Cc: linux-media, linux-arm-kernel, linux-mediatek, linux-kernel,
djkurtz, pawel, Wu-Cheng Li
From: Wu-Cheng Li <wuchengli@google.com>
This patch uses V4L2_DEC_CMD_STOP to implement flush -- requesting
the remaining images to be returned to userspace. The old unofficial
way was to use a size-0 input buffer and the code is removed.
Tiffany Lin (1):
mtk-vcodec: use V4L2_DEC_CMD_STOP to implement flush
drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 151 ++++++++++++++-------
.../media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 14 ++
drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 2 +
3 files changed, 117 insertions(+), 50 deletions(-)
--
2.8.0.rc3.226.g39d4020
^ permalink raw reply
* [PATCH] arm: dts: mt2701: Sort DT nodes by register address
From: James Liao @ 2016-12-02 2:06 UTC (permalink / raw)
To: Matthias Brugger
Cc: Rob Herring, Russell King, Mark Rutland,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, James Liao
This patch rearrange MT2701 DT nodes to keep them in ascending order.
Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
This patch is based on latest v4.9-next/dts branch of [1], to fix MT2701
DT nodes ordering.
[1] https://github.com/mbgg/linux-mediatek/tree/v4.9-next/dts
arch/arm/boot/dts/mt2701.dtsi | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 7eab6f4..73f4b7c 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -96,24 +96,6 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
- pio: pinctrl@10005000 {
- compatible = "mediatek,mt2701-pinctrl";
- reg = <0 0x1000b000 0 0x1000>;
- mediatek,pctl-regmap = <&syscfg_pctl_a>;
- pins-are-numbered;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- syscfg_pctl_a: syscfg@10005000 {
- compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
- reg = <0 0x10005000 0 0x1000>;
- };
-
topckgen: syscon@10000000 {
compatible = "mediatek,mt2701-topckgen", "syscon";
reg = <0 0x10000000 0 0x1000>;
@@ -134,6 +116,24 @@
#reset-cells = <1>;
};
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt2701-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl_a>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ syscfg_pctl_a: syscfg@10005000 {
+ compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
+ reg = <0 0x10005000 0 0x1000>;
+ };
+
watchdog: watchdog@10007000 {
compatible = "mediatek,mt2701-wdt",
"mediatek,mt6589-wdt";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* Re: [PATCH 1/4] mmc: mediatek: Fix CMD6 timeout issue
From: Ulf Hansson @ 2016-12-01 9:51 UTC (permalink / raw)
To: Yong Mao
Cc: Mark Rutland, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
YH Huang, Nicolas Boichat, Mathias Nyman, srv_heupstream,
Catalin Marinas, Will Deacon, Douglas Anderson,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Chunfeng Yun, Rob Herring, Geert Uytterhoeven,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Philipp Zabel, Matthias Brugger,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Eddie Huang,
Chaotian Jing <chaot>
In-Reply-To: <1478585341-6749-2-git-send-email-yong.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
On 8 November 2016 at 07:08, Yong Mao <yong.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
> From: yong mao <yong.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>
> When initializing EMMC, after switch to HS400,
> it will issue CMD6 to change ext_csd, if first CMD6 got CRC
> error, the repeat CMD6 may get timeout, that's
> because SDCBSY was cleared by msdc_reset_hw()
Sorry for the delay!
We have recently been re-working the sequence for how to deal more
properly with CMD6 in the mmc core.
The changes done so far should mostly concern switches to HS and HS
DDR, but I think you should run a re-test to make sure you still hit
the same problems.
>
> Signed-off-by: Yong Mao <yong.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> Signed-off-by: Chaotian Jing <chaotian.jing-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
> drivers/mmc/host/mtk-sd.c | 77 ++++++++++++++++++++++++++++++---------------
> 1 file changed, 51 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 84e9afc..b29683b 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -826,6 +826,15 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
> return true;
> }
>
> +static int msdc_card_busy(struct mmc_host *mmc)
> +{
> + struct msdc_host *host = mmc_priv(mmc);
> + u32 status = readl(host->base + MSDC_PS);
> +
> + /* check if data0 is low */
> + return !(status & BIT(16));
> +}
> +
> /* It is the core layer's responsibility to ensure card status
> * is correct before issue a request. but host design do below
> * checks recommended.
Hmm. Why?
I think you should rely on the mmc core to invoke the ->card_busy()
ops instead. The core knows better when it's needed.
Perhaps that may also resolve some of these issues for you!?
> @@ -835,10 +844,20 @@ static inline bool msdc_cmd_is_ready(struct msdc_host *host,
> {
> /* The max busy time we can endure is 20ms */
> unsigned long tmo = jiffies + msecs_to_jiffies(20);
> + u32 count = 0;
> +
> + if (in_interrupt()) {
> + while ((readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) &&
> + (count < 1000)) {
> + udelay(1);
> + count++;
This seems like a bad idea, "busy-wait" in irq context is never a good idea.
> + }
> + } else {
> + while ((readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) &&
> + time_before(jiffies, tmo))
> + cpu_relax();
> + }
>
> - while ((readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) &&
> - time_before(jiffies, tmo))
> - cpu_relax();
> if (readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) {
> dev_err(host->dev, "CMD bus busy detected\n");
> host->error |= REQ_CMD_BUSY;
> @@ -846,17 +865,35 @@ static inline bool msdc_cmd_is_ready(struct msdc_host *host,
> return false;
> }
>
> - if (mmc_resp_type(cmd) == MMC_RSP_R1B || cmd->data) {
> - tmo = jiffies + msecs_to_jiffies(20);
> - /* R1B or with data, should check SDCBUSY */
> - while ((readl(host->base + SDC_STS) & SDC_STS_SDCBUSY) &&
> - time_before(jiffies, tmo))
> - cpu_relax();
> - if (readl(host->base + SDC_STS) & SDC_STS_SDCBUSY) {
> - dev_err(host->dev, "Controller busy detected\n");
> - host->error |= REQ_CMD_BUSY;
> - msdc_cmd_done(host, MSDC_INT_CMDTMO, mrq, cmd);
> - return false;
> + if (cmd->opcode != MMC_SEND_STATUS) {
> + count = 0;
> + /* Consider that CMD6 crc error before card was init done,
> + * mmc_retune() will return directly as host->card is null.
> + * and CMD6 will retry 3 times, must ensure card is in transfer
> + * state when retry.
> + */
> + tmo = jiffies + msecs_to_jiffies(60 * 1000);
> + while (1) {
> + if (msdc_card_busy(host->mmc)) {
> + if (in_interrupt()) {
> + udelay(1);
> + count++;
> + } else {
> + msleep_interruptible(10);
> + }
> + } else {
> + break;
> + }
> + /* Timeout if the device never
> + * leaves the program state.
> + */
> + if (count > 1000 || time_after(jiffies, tmo)) {
> + pr_err("%s: Card stuck in programming state! %s\n",
> + mmc_hostname(host->mmc), __func__);
> + host->error |= REQ_CMD_BUSY;
> + msdc_cmd_done(host, MSDC_INT_CMDTMO, mrq, cmd);
> + return false;
> + }
This hole new code is a hack, that shouldn't be needed in the host driver.
I think we need to investigate and fix the issue in the mmc core
layer, to make this work for your host driver. That instead of doing a
work around in the host.
> }
> }
> return true;
> @@ -1070,18 +1107,6 @@ static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
> return ret;
> }
>
> -static int msdc_card_busy(struct mmc_host *mmc)
> -{
> - struct msdc_host *host = mmc_priv(mmc);
> - u32 status = readl(host->base + MSDC_PS);
> -
> - /* check if any pin between dat[0:3] is low */
> - if (((status >> 16) & 0xf) != 0xf)
> - return 1;
> -
> - return 0;
> -}
> -
> static void msdc_request_timeout(struct work_struct *work)
> {
> struct msdc_host *host = container_of(work, struct msdc_host,
> --
> 1.7.9.5
>
Kind regards
Uffe
^ permalink raw reply
* Re: [PATCH v10 10/13] drm/mediatek: add dsi ulp mode control
From: CK Hu @ 2016-12-01 1:10 UTC (permalink / raw)
To: YT Shen
Cc: Daniel Vetter, Jie Qiu, Mao Huang, yingjoe.chen, Dan Carpenter,
Jitao Shi, Sascha Hauer, linux-mediatek, dri-devel,
Matthias Brugger, shaoming chen, linux-arm-kernel, srv_heupstream,
emil.l.velikov, linux-kernel, Maxime Ripard
In-Reply-To: <1480070076-6196-11-git-send-email-yt.shen@mediatek.com>
Hi, YT:
On Fri, 2016-11-25 at 18:34 +0800, YT Shen wrote:
> modify dsi enter ultra low power mode method
>
This looks like a power-saving patch. I think without this, MT2701 could
still work correctly. The commit message is too simple, please describe
why this patch is related to MT2701. If it is not related to MT2701,
move this patch out of MT2701 series and send it independently.
Regards,
CK
> Signed-off-by: shaoming chen <shaoming.chen@mediatek.com>
> Signed-off-by: YT Shen <yt.shen@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index d03a0f1..01df829 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -289,7 +289,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
> static void mtk_dsi_clk_ulp_mode_enter(struct mtk_dsi *dsi)
> {
> mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_HS_TX_EN, 0);
> - mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_ULPM_EN, 0);
> + mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_ULPM_EN, LC_ULPM_EN);
> }
>
> static void mtk_dsi_clk_ulp_mode_leave(struct mtk_dsi *dsi)
> @@ -302,7 +302,7 @@ static void mtk_dsi_clk_ulp_mode_leave(struct mtk_dsi *dsi)
> static void mtk_dsi_lane0_ulp_mode_enter(struct mtk_dsi *dsi)
> {
> mtk_dsi_mask(dsi, DSI_PHY_LD0CON, LD0_HS_TX_EN, 0);
> - mtk_dsi_mask(dsi, DSI_PHY_LD0CON, LD0_ULPM_EN, 0);
> + mtk_dsi_mask(dsi, DSI_PHY_LD0CON, LD0_ULPM_EN, LD0_ULPM_EN);
> }
>
> static void mtk_dsi_lane0_ulp_mode_leave(struct mtk_dsi *dsi)
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [RESEND PATCH] pinctrl: mt8173: set GPIO16 to usb iddig mode
From: Hongzhou Yang @ 2016-12-01 0:45 UTC (permalink / raw)
To: Chunfeng Yun
Cc: Linus Walleij, Matthias Brugger, Alexandre Courbot, Biao Huang,
linux-kernel, linux-arm-kernel, linux-mediatek, linux-gpio
In-Reply-To: <1480472491-4644-1-git-send-email-chunfeng.yun@mediatek.com>
On Wed, 2016-11-30 at 10:21 +0800, Chunfeng Yun wrote:
> the default mode of GPIO16 pin is gpio, when set EINT16 to
> IRQ_TYPE_LEVEL_HIGH, no interrupt is triggered, it can be
> fixed when set its default mode as usb iddig.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> drivers/pinctrl/mediatek/pinctrl-mtk-mt8173.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-mt8173.h b/drivers/pinctrl/mediatek/pinctrl-mtk-mt8173.h
> index 13e5b68..9b018fd 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-mt8173.h
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-mt8173.h
> @@ -201,7 +201,7 @@
> MTK_PIN(
> PINCTRL_PIN(16, "IDDIG"),
> NULL, "mt8173",
> - MTK_EINT_FUNCTION(0, 16),
> + MTK_EINT_FUNCTION(1, 16),
> MTK_FUNCTION(0, "GPIO16"),
> MTK_FUNCTION(1, "IDDIG"),
> MTK_FUNCTION(2, "CMFLASH"),
Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Thanks,
Hongzhou
^ permalink raw reply
* Re: [PATCH 6/6] pinctrl: mt8173: set GPIO16 to usb iddig mode
From: Hongzhou Yang @ 2016-12-01 0:43 UTC (permalink / raw)
To: Matthias Brugger
Cc: Mark Rutland, Maoguang Meng, Linus Walleij, Mathias Nyman,
Alan Stern, chunfeng yun, Yingjoe Chen, Felipe Balbi,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Pawel Moll,
Ian Campbell, Biao Huang, Sascha Hauer,
linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring,
moderated list:ARM/Mediatek SoC support,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Sergei Shtylyov, Greg Kroah-Hartman <gregkh>
In-Reply-To: <42f5df18-2edd-08f2-a833-9c92ac85e87c-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On Wed, 2016-11-23 at 19:32 +0100, Matthias Brugger wrote:
> Hi Hongzhou,
>
> On 12/05/16 04:55, Hongzhou Yang wrote:
> > On Wed, 2016-05-11 at 19:09 -0700, Hongzhou Yang wrote:
> >> On Thu, 2016-05-12 at 09:41 +0800, chunfeng yun wrote:
> >>> Hi,
> >>>
> >>> On Wed, 2016-05-11 at 11:32 -0700, Hongzhou Yang wrote:
> >>>> On Wed, 2016-05-11 at 13:56 +0200, Linus Walleij wrote:
> >>>>> On Tue, May 10, 2016 at 10:23 AM, Chunfeng Yun
> >>>>> <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
> >>>>>
> >>>>>> the default mode of GPIO16 pin is gpio, when set EINT16 to
> >>>>>> IRQ_TYPE_LEVEL_HIGH, no interrupt is triggered, it can be
> >>>>>> fixed when set its default mode as usb iddig.
> >>>>>>
> >>>>>> Signed-off-by: Chunfeng Yun <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> >>>>>
> >>>>
> >>>> Chunfeng, GPIO16 can be used as EINT16 mode, but the pinmux should be 0.
> >>>> If you want to set its default mode to iddig, you should set it in dts.
> >>>>
> >>> I set it in DTS, but it didn't work, because when usb driver requested
> >>> IRQ, pinmux was switched back to default mode set by
> >>> MTK_EINT_FUNCTION().
> >>>
> >>
> >> After confirmed, there are something wrong with data sheet and pinmux
> >> table, and GPIO16 can only receive interrupt by mode 1. So
> >>
> >> Acked-by: Hongzhou Yang <hongzhou.yang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> >>
> >
> > Linus,
> >
> > We find there are some other pins still have the same problem, so please
> > hold on it. Sorry for so much noise.
> >
>
> Did you made any progress on this? I didn't see any patch on the mailing
> list.
>
> Regards,
> Matthias
Hi Matthias,
Sorry for the late reply.
I have double confirmed with HW designer, other special EINTs are
built-in and they are using internal signal, they are not triggered
by GPIO, only GPIO16 should set to mode 1.
And, Chunfeng already re-sent this patch.
Thank you very much.
Yours,
Hongzhou
^ permalink raw reply
* Re: [PATCH 1/1] usb: return error code when platform_get_irq fails
From: Mathias Nyman @ 2016-11-30 14:05 UTC (permalink / raw)
To: Matthias Brugger, Pan Bian, linux-usb, Greg Kroah-Hartman,
Mathias Nyman, linux-arm-kernel@lists.infradead.org,
moderated list:ARM/Mediatek SoC..., Chunfeng Yun
Cc: linux-kernel
In-Reply-To: <52a774c0-9bca-6d1b-a470-f07caefa5d3a@gmail.com>
On 30.11.2016 15:41, Matthias Brugger wrote:
>
>
> On 29/11/16 13:57, Pan Bian wrote:
>> In function xhci_mtk_probe(), variable ret takes the return value. Its
>> value should be negative on failures. However, when the call to function
>> platform_get_irq() fails, it does not set the error code, and 0 will be
>> returned. 0 indicates no error. As a result, the callers of function
>> xhci_mtk_probe() will not be able to detect the error. This patch fixes
>> the bug by assigning the return value of platform_get_irq() to variable
>> ret if it fails.
>>
>> Signed-off-by: Pan Bian <bianpan2016@163.com>
>> ---
>> drivers/usb/host/xhci-mtk.c | 4 +++-
>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
>> index 79959f1..f2365a4 100644
>> --- a/drivers/usb/host/xhci-mtk.c
>> +++ b/drivers/usb/host/xhci-mtk.c
>> @@ -560,8 +560,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
>> goto disable_ldos;
>>
>> irq = platform_get_irq(pdev, 0);
>> - if (irq < 0)
>> + if (irq < 0) {
>> + ret = irq;
>> goto disable_clk;
>> + }
>>
>> /* Initialize dma_mask and coherent_dma_mask to 32-bits */
>> ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
>>
>
>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
>
Thanks, Added to queue
-Mathias
^ permalink raw reply
* Re: [PATCH v10 13/13] drm/mediatek: add support for Mediatek SoC MT2701
From: Matthias Brugger @ 2016-11-30 14:03 UTC (permalink / raw)
To: YT Shen, dri-devel, Philipp Zabel
Cc: David Airlie, Daniel Kurtz, Mao Huang, CK Hu, Bibby Hsieh,
Daniel Vetter, Thierry Reding, Jie Qiu, Maxime Ripard,
Chris Wilson, shaoming chen, Jitao Shi, Boris Brezillon,
Dan Carpenter, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream, Sascha Hauer, yingjoe.chen, emil.l.velikov
In-Reply-To: <1480070076-6196-14-git-send-email-yt.shen@mediatek.com>
On 25/11/16 11:34, YT Shen wrote:
> static const struct of_device_id mtk_disp_rdma_driver_dt_match[] = {
> + { .compatible = "mediatek,mt2701-disp-rdma",
> + .data = &mt2701_rdma_driver_data},
> { .compatible = "mediatek,mt8173-disp-rdma",
> .data = &mt8173_rdma_driver_data},
> {},
[...]
> static const struct of_device_id ddp_driver_dt_match[] = {
> + { .compatible = "mediatek,mt2701-disp-mutex", .data = mt2701_mutex_mod},
> { .compatible = "mediatek,mt8173-disp-mutex", .data = mt8173_mutex_mod},
> {},
> };
[...]
>
> static const struct of_device_id mtk_disp_color_driver_dt_match[] = {
> + { .compatible = "mediatek,mt2701-disp-color",
> + .data = &mt2701_color_driver_data},
> { .compatible = "mediatek,mt8173-disp-color",
> .data = &mt8173_color_driver_data},
> {},
[...]
> static const struct of_device_id mtk_drm_of_ids[] = {
> + { .compatible = "mediatek,mt2701-mmsys",
> + .data = &mt2701_mmsys_driver_data},
> { .compatible = "mediatek,mt8173-mmsys",
> .data = &mt8173_mmsys_driver_data},
> { }
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 0569f2e..f63cc91 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -1203,6 +1203,7 @@ static int mtk_dsi_remove(struct platform_device *pdev)
> }
>
> static const struct of_device_id mtk_dsi_of_match[] = {
> + { .compatible = "mediatek,mt2701-dsi" },
> { .compatible = "mediatek,mt8173-dsi" },
> { },
> };
[...]
>
> static const struct of_device_id mtk_mipi_tx_match[] = {
> + { .compatible = "mediatek,mt2701-mipi-tx",
> + .data = &mt2701_mipitx_data },
> { .compatible = "mediatek,mt8173-mipi-tx",
> .data = &mt8173_mipitx_data },
> {},
I'm not sure if I missed some, but you should update the binding
description for newly added bindings.
Thanks a lot,
Matthias
^ permalink raw reply
* Re: [PATCH 1/1] usb: return error code when platform_get_irq fails
From: Matthias Brugger @ 2016-11-30 13:41 UTC (permalink / raw)
To: Pan Bian, linux-usb-u79uwXL29TY76Z2rM5mHXA, Greg Kroah-Hartman,
Mathias Nyman,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
moderated list:ARM/Mediatek SoC..., Chunfeng Yun
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <1480424255-25059-1-git-send-email-bianpan2016-9Onoh4P/yGk@public.gmane.org>
On 29/11/16 13:57, Pan Bian wrote:
> In function xhci_mtk_probe(), variable ret takes the return value. Its
> value should be negative on failures. However, when the call to function
> platform_get_irq() fails, it does not set the error code, and 0 will be
> returned. 0 indicates no error. As a result, the callers of function
> xhci_mtk_probe() will not be able to detect the error. This patch fixes
> the bug by assigning the return value of platform_get_irq() to variable
> ret if it fails.
>
> Signed-off-by: Pan Bian <bianpan2016-9Onoh4P/yGk@public.gmane.org>
> ---
> drivers/usb/host/xhci-mtk.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
> index 79959f1..f2365a4 100644
> --- a/drivers/usb/host/xhci-mtk.c
> +++ b/drivers/usb/host/xhci-mtk.c
> @@ -560,8 +560,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> goto disable_ldos;
>
> irq = platform_get_irq(pdev, 0);
> - if (irq < 0)
> + if (irq < 0) {
> + ret = irq;
> goto disable_clk;
> + }
>
> /* Initialize dma_mask and coherent_dma_mask to 32-bits */
> ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
>
Reviewed-by: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Next time please make sure to send the patch to all relevant lists and
people (get_maintainer.pl).
Regards,
Matthias
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v10 09/13] drm/mediatek: add mipi_tx data rate check
From: CK Hu @ 2016-11-30 11:05 UTC (permalink / raw)
To: YT Shen
Cc: Daniel Vetter, Jie Qiu, Mao Huang, yingjoe.chen, Dan Carpenter,
Jitao Shi, Sascha Hauer, linux-mediatek, dri-devel,
Matthias Brugger, shaoming chen, linux-arm-kernel, srv_heupstream,
emil.l.velikov, linux-kernel, Maxime Ripard
In-Reply-To: <1480070076-6196-10-git-send-email-yt.shen@mediatek.com>
Hi, YT:
On Fri, 2016-11-25 at 18:34 +0800, YT Shen wrote:
> modify data rate limitation (>lGbps/lane) for mipitx
>
I think MT2701 DRM can work correctly without this patch.
Why do you put this patch in MT2701 series?
Maybe you can send this patch independently.
Regards,
CK
> Signed-off-by: shaoming chen <shaoming.chen@mediatek.com>
> Signed-off-by: YT Shen <yt.shen@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> index fd84914..1ef00ac 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> @@ -177,7 +177,9 @@ static int mtk_mipi_tx_pll_prepare(struct clk_hw *hw)
>
> dev_dbg(mipi_tx->dev, "prepare: %u Hz\n", mipi_tx->data_rate);
>
> - if (mipi_tx->data_rate >= 500000000) {
> + if (mipi_tx->data_rate > 1250000000) {
> + return -EINVAL;
> + } else if (mipi_tx->data_rate >= 500000000) {
> txdiv = 1;
> txdiv0 = 0;
> txdiv1 = 0;
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [PATCH v10 11/13] drm/mediatek: add dsi rxtx control
From: CK Hu @ 2016-11-30 10:47 UTC (permalink / raw)
To: YT Shen
Cc: Daniel Vetter, Jie Qiu, Mao Huang, yingjoe.chen, Dan Carpenter,
Jitao Shi, Sascha Hauer, linux-mediatek, dri-devel,
Matthias Brugger, shaoming chen, linux-arm-kernel, srv_heupstream,
emil.l.velikov, linux-kernel, Maxime Ripard
In-Reply-To: <1480070076-6196-12-git-send-email-yt.shen@mediatek.com>
Hi, YT:
On Fri, 2016-11-25 at 18:34 +0800, YT Shen wrote:
> add non-continuous clock mode and EOT packet control for dsi
>
I think commit title should be 'drm/mediatek: add non-continuous clock
mode and EOT packet control for dsi', and commit message should describe
more information about this modification. For example, what is the
difference between with and without this patch. Does it fix any problem?
Regards,
CK
> Signed-off-by: shaoming chen <shaoming.chen@mediatek.com>
> Signed-off-by: YT Shen <yt.shen@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 01df829..ded4202 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -399,6 +399,9 @@ static void mtk_dsi_rxtx_control(struct mtk_dsi *dsi)
> break;
> }
>
> + tmp_reg |= (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) << 6;
> + tmp_reg |= (dsi->mode_flags & MIPI_DSI_MODE_EOT_PACKET) >> 3;
> +
> writel(tmp_reg, dsi->regs + DSI_TXRX_CTRL);
> }
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [PATCH v10 00/13] MT2701 DRM support
From: CK Hu @ 2016-11-30 8:59 UTC (permalink / raw)
To: YT Shen
Cc: Daniel Vetter, Jie Qiu, Mao Huang, yingjoe.chen, Dan Carpenter,
Jitao Shi, Sascha Hauer, linux-mediatek, dri-devel,
Matthias Brugger, shaoming chen, linux-arm-kernel, srv_heupstream,
emil.l.velikov, linux-kernel, Maxime Ripard
In-Reply-To: <1480070076-6196-1-git-send-email-yt.shen@mediatek.com>
Hi, YT:
On Fri, 2016-11-25 at 18:34 +0800, YT Shen wrote:
> This is MT2701 DRM support PATCH v10, based on 4.9-rc1.
> We add DSI interrupt control, transfer function for MIPI DSI panel support.
> Most codes are the same, except some register changed.
>
> For example:
> - DISP_OVL address offset changed, color format definition changed.
> - DISP_RDMA fifo size changed.
> - DISP_COLOR offset changed.
> - MIPI_TX setting changed.
>
> We add a new component DDP_COMPONENT_BLS, and the connections are updated.
> OVL -> RDMA -> COLOR -> BLS -> DSI
> RDMA -> DPI
> And we have shadow register support in MT2701.
>
> We remove dts patch from the patch series, which depends on MT2701 CCF and scpsys.
>
Some patches in this series conflict with Linux 4.9-rc7.
Once you send next patches, please base on Linux 4.9-rc7 or later
version.
Regards,
CK
> Changes since v9:
> - Split DSI patches into smaller parts
> - Use a real linux errno for return value
> - Add error handling in mtk_output_dsi_enable()
> - Remove unused changes and redundant delays
> - Add helpers and macros for configuration
> - Combine "drm/mediatek: rename macros, add chip prefix" and "drm/mediatek: add *driver_data for different hardware setting"
>
> Changes since v8:
> - enable 3 DSI interrupts only
> - move mtk_dsi_wait_for_irq_done() to the patch of irq control
> - use the name BLS in DRM driver part
> - move BLS declaration to a separate patch
> - update mtk_dsi_switch_to_cmd_mode()
> - update mtk_output_dsi_enable() and mtk_output_dsi_disable()
>
> Changes since v7:
> - Remove redundant codes
> - Move the definition of DDP_COMPONENT_BLS to patch of "drm/mediatek: update display module connections"
> - Move _dsi_irq_wait_queue into platform driver data
> - Move mtk_dsi_irq_data_clear() to patch of "drm/mediatek: add dsi interrupt control"
> - Add more descriptions in the commit messages
>
> Changes since v6:
> - Change data type of irq_data to u32
> - Rewrite mtk_dsi_host_transfer() for simplify
> - Move some MIPI_TX config to patch of "drm/mediatek: add *driver_data for different hardware settings".
> - Remove device tree from this patch series
>
> Changes since v5:
> - Remove DPI device tree and compatible string
> - Use one wait queue to handle interrupt status
> - Update the interrupt check flow and DSI_INT_ALL_BITS
> - Use same function for host read/write command
> - various fixes
>
> Changes since v4:
> - Add messages when timeout in mtk_disp_mutex_acquire()
> - Add descriptions for DISP_REG_MUTEX registers
> - Move connection settings for display modules to a separate patch
> - Remove 'mt2701-disp-wdma' because it is unused
> - Move cleaning up and renaming to a separate patch
> - Use wait_event_interruptible_timeout() to replace polling
> - Remove irq_num from mtk_dsi structure
> - Remove redundant and debug codes
>
> Changes since v3:
> - Add DSI support for MIPI DSI panels
> - Update BLS binding to PWM nodes
> - Remove ufoe device nodes
> - Remove redundant parentheses
> - Remove global variable initialization
>
> Changes since v2:
> - Rename mtk_ddp_mux_sel to mtk_ddp_sout_sel
> - Update mt2701_mtk_ddp_ext components
> - Changed to prefix naming
> - Reorder the patch series
> - Use of_device_get_match_data() to get driver private data
> - Use iopoll macros to implement mtk_disp_mutex_acquire()
> - Removed empty device tree nodes
>
> Changes since v1:
> - Removed BLS bindings and codes, which belong to pwm driver
> - Moved mtk_disp_mutex_acquire() just before mtk_crtc_ddp_config()
> - Split patch into smaller parts
> - Added const keyword to constant structure
> - Removed codes for special memory align
>
> Thanks,
> yt.shen
>
> YT Shen (11):
> drm/mediatek: add helpers for coverting from the generic components
> drm/mediatek: add *driver_data for different hardware settings
> drm/mediatek: add shadow register support
> drm/mediatek: add BLS component
> drm/mediatek: update display module connections
> drm/mediatek: cleaning up and refine
> drm/mediatek: add mipi_tx data rate check
> drm/mediatek: add dsi ulp mode control
> drm/mediatek: add dsi rxtx control
> drm/mediatek: update DSI sub driver flow for sending commands to panel
> drm/mediatek: add support for Mediatek SoC MT2701
>
> shaoming chen (2):
> drm/mediatek: add dsi interrupt control
> drm/mediatek: add dsi transfer function
>
> drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 64 +++--
> drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 39 ++-
> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 76 +++--
> drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 138 ++++++---
> drivers/gpu/drm/mediatek/mtk_drm_ddp.h | 2 +
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 41 ++-
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 7 +
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 54 +++-
> drivers/gpu/drm/mediatek/mtk_drm_drv.h | 9 +
> drivers/gpu/drm/mediatek/mtk_dsi.c | 430 ++++++++++++++++++++++++----
> drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 42 ++-
> 11 files changed, 737 insertions(+), 165 deletions(-)
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [PATCH v10 12/13] drm/mediatek: update DSI sub driver flow for sending commands to panel
From: CK Hu @ 2016-11-30 7:58 UTC (permalink / raw)
To: YT Shen
Cc: Daniel Vetter, Jie Qiu, Mao Huang, yingjoe.chen, Dan Carpenter,
Jitao Shi, Sascha Hauer, linux-mediatek, dri-devel,
Matthias Brugger, shaoming chen, linux-arm-kernel, srv_heupstream,
emil.l.velikov, linux-kernel, Maxime Ripard
In-Reply-To: <1480070076-6196-13-git-send-email-yt.shen@mediatek.com>
Hi, YT:
some comments inline.
On Fri, 2016-11-25 at 18:34 +0800, YT Shen wrote:
> This patch update enable/disable flow of DSI module.
> Original flow works on there is a bridge chip: DSI -> bridge -> panel.
> In this case: DSI -> panel, the DSI sub driver flow should be updated.
> We need to initialize DSI first so that we can send commands to panel.
>
> Signed-off-by: shaoming chen <shaoming.chen@mediatek.com>
> Signed-off-by: YT Shen <yt.shen@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 101 +++++++++++++++++++++++++++++--------
> 1 file changed, 80 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index ded4202..0569f2e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -126,6 +126,10 @@
> #define CLK_HS_POST (0xff << 8)
> #define CLK_HS_EXIT (0xff << 16)
>
> +#define DSI_VM_CMD_CON 0x130
> +#define VM_CMD_EN BIT(0)
> +#define TS_VFP_EN BIT(5)
> +
> #define DSI_CMDQ0 0x180
> #define CONFIG (0xff << 0)
> #define SHORT_PACKET 0
> @@ -249,7 +253,9 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
> * mipi_ratio is mipi clk coefficient for balance the pixel clk in mipi.
> * we set mipi_ratio is 1.05.
> */
> - dsi->data_rate = dsi->vm.pixelclock * 3 * 21 / (1 * 1000 * 10);
> + dsi->data_rate = dsi->vm.pixelclock * 12 * 21;
> + dsi->data_rate /= (dsi->lanes * 1000 * 10);
This looks like a bug fix that use lanes to calculate data rate.
> + DRM_DEBUG_DRIVER("set mipitx's data rate: %dMHz\n", dsi->data_rate);
>
> ret = clk_set_rate(dsi->hs_clk, dsi->data_rate * 1000000);
> if (ret < 0) {
> @@ -333,16 +339,23 @@ static void mtk_dsi_set_mode(struct mtk_dsi *dsi)
> u32 vid_mode = CMD_MODE;
>
> if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
> - vid_mode = SYNC_PULSE_MODE;
> -
> - if ((dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) &&
> - !(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE))
> + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
> vid_mode = BURST_MODE;
> + else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
> + vid_mode = SYNC_PULSE_MODE;
> + else
> + vid_mode = SYNC_EVENT_MODE;
> }
>
> writel(vid_mode, dsi->regs + DSI_MODE_CTRL);
> }
>
> +static void mtk_dsi_set_vm_cmd(struct mtk_dsi *dsi)
> +{
> + mtk_dsi_mask(dsi, DSI_VM_CMD_CON, VM_CMD_EN, VM_CMD_EN);
> + mtk_dsi_mask(dsi, DSI_VM_CMD_CON, TS_VFP_EN, TS_VFP_EN);
> +}
> +
> static void mtk_dsi_ps_control_vact(struct mtk_dsi *dsi)
> {
> struct videomode *vm = &dsi->vm;
> @@ -480,6 +493,16 @@ static void mtk_dsi_start(struct mtk_dsi *dsi)
> writel(1, dsi->regs + DSI_START);
> }
>
> +static void mtk_dsi_stop(struct mtk_dsi *dsi)
> +{
> + writel(0, dsi->regs + DSI_START);
> +}
> +
> +static void mtk_dsi_set_cmd_mode(struct mtk_dsi *dsi)
> +{
> + writel(CMD_MODE, dsi->regs + DSI_MODE_CTRL);
> +}
> +
> static void mtk_dsi_set_interrupt_enable(struct mtk_dsi *dsi)
> {
> u32 inten = LPRX_RD_RDY_INT_FLAG | CMD_DONE_INT_FLAG | VM_DONE_INT_FLAG;
> @@ -538,6 +561,19 @@ static irqreturn_t mtk_dsi_irq(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> +static s32 mtk_dsi_switch_to_cmd_mode(struct mtk_dsi *dsi, u8 irq_flag, u32 t)
> +{
> + mtk_dsi_irq_data_clear(dsi, irq_flag);
> + mtk_dsi_set_cmd_mode(dsi);
> +
> + if (!mtk_dsi_wait_for_irq_done(dsi, irq_flag, t)) {
> + DRM_ERROR("failed to switch cmd mode\n");
> + return -ETIME;
> + } else {
> + return 0;
> + }
> +}
> +
> static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
> {
> if (WARN_ON(dsi->refcount == 0))
> @@ -546,11 +582,6 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
> if (--dsi->refcount != 0)
> return;
>
> - mtk_dsi_lane0_ulp_mode_enter(dsi);
> - mtk_dsi_clk_ulp_mode_enter(dsi);
> -
> - mtk_dsi_disable(dsi);
> -
> clk_disable_unprepare(dsi->engine_clk);
> clk_disable_unprepare(dsi->digital_clk);
>
> @@ -564,13 +595,6 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
> if (dsi->enabled)
> return;
>
> - if (dsi->panel) {
> - if (drm_panel_prepare(dsi->panel)) {
> - DRM_ERROR("failed to setup the panel\n");
> - return;
> - }
> - }
> -
> ret = mtk_dsi_poweron(dsi);
> if (ret < 0) {
> DRM_ERROR("failed to power on dsi\n");
> @@ -578,21 +602,43 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
> }
>
> mtk_dsi_rxtx_control(dsi);
> + mtk_dsi_ps_control_vact(dsi);
> + mtk_dsi_set_vm_cmd(dsi);
Even though dsi does not directly connect to panel, you newly set vm cmd
here. This looks like a bug fix.
> + mtk_dsi_config_vdo_timing(dsi);
> + mtk_dsi_set_interrupt_enable(dsi);
>
> mtk_dsi_clk_ulp_mode_leave(dsi);
> mtk_dsi_lane0_ulp_mode_leave(dsi);
> mtk_dsi_clk_hs_mode(dsi, 0);
> - mtk_dsi_set_mode(dsi);
>
> - mtk_dsi_ps_control_vact(dsi);
> - mtk_dsi_config_vdo_timing(dsi);
> - mtk_dsi_set_interrupt_enable(dsi);
> + if (dsi->panel) {
> + if (drm_panel_prepare(dsi->panel)) {
> + DRM_ERROR("failed to prepare the panel\n");
> +
> + mtk_dsi_stop(dsi);
You never start dsi before here, why do you stop dsi here?
> + mtk_dsi_poweroff(dsi);
Refer to next comment, you may goto undo item in bottom of this
function.
> + return;
> + }
> + }
>
> mtk_dsi_set_mode(dsi);
> mtk_dsi_clk_hs_mode(dsi, 1);
>
> mtk_dsi_start(dsi);
>
> + if (dsi->panel) {
> + if (drm_panel_enable(dsi->panel)) {
> + DRM_ERROR("failed to enable the panel\n");
> +
> + if (drm_panel_unprepare(dsi->panel))
> + DRM_ERROR("failed to unprepare the panel\n");
> +
> + mtk_dsi_stop(dsi);
I think you should stop dsi before panel unprepare. Otherwise, why not
move these undo item to the bottom of this function. For example:
if (drm_panel_enable(dsi->panel)) {
DRM_ERROR("failed to enable the panel\n");
goto stop_dsi;
...
dsi->enabled = true;
return;
stop_dsi:
mtk_dsi_stop(dsi);
if (drm_panel_unprepare(dsi->panel))
DRM_ERROR("failed to unprepare the panel\n");
poweroff_dsi:
mtk_dsi_poweroff(dsi);
return;
> + mtk_dsi_poweroff(dsi);
> + return;
> + }
> + }
> +
> dsi->enabled = true;
> }
>
> @@ -608,6 +654,19 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
> }
> }
>
> + mtk_dsi_stop(dsi);
Even though dsi does not directly connect to panel, you newly stop dsi
here. This looks like a bug fix.
> + if (!mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) {
ditto.
> + if (dsi->panel) {
> + if (drm_panel_unprepare(dsi->panel))
> + DRM_ERROR("failed to unprepare the panel\n");
> + }
> + }
> +
> + mtk_dsi_reset_engine(dsi);
ditto.
> + mtk_dsi_lane0_ulp_mode_enter(dsi);
> + mtk_dsi_clk_ulp_mode_enter(dsi);
> + mtk_dsi_disable(dsi);
> +
> mtk_dsi_poweroff(dsi);
>
> dsi->enabled = false;
Regards,
CK
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [PATCH v10 02/13] drm/mediatek: add *driver_data for different hardware settings
From: Daniel Kurtz @ 2016-11-30 6:42 UTC (permalink / raw)
To: YT Shen
Cc: Daniel Vetter, dri-devel, Jie Qiu, Mao Huang,
Yingjoe Chen (陳英洲), Dan Carpenter, Jitao Shi,
Sascha Hauer, moderated list:ARM/Mediatek SoC support,
Matthias Brugger, shaoming chen,
linux-arm-kernel@lists.infradead.org, srv_heupstream,
Emil Velikov, linux-kernel@vger.kernel.org, Maxime Ripard
In-Reply-To: <1480070076-6196-3-git-send-email-yt.shen@mediatek.com>
Hi YT,
On Fri, Nov 25, 2016 at 6:34 PM, YT Shen <yt.shen@mediatek.com> wrote:
>
> There are some hardware settings changed, between MT8173 & MT2701:
> DISP_OVL address offset changed, color format definition changed.
> DISP_RDMA fifo size changed.
> DISP_COLOR offset changed.
> MIPI_TX pll setting changed.
> And add prefix for mtk_ddp_main & mtk_ddp_ext & mutex_mod.
Sorry, I have not had time to thoroughly review the new patch set, but
one quick comment:
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> index 22a33ee..cfaa760 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> @@ -78,6 +78,10 @@ struct mtk_ddp_comp_funcs {
> struct drm_crtc_state *state);
> };
>
> +struct mtk_ddp_comp_driver_data {
> + unsigned int color_offset;
> +};
> +
> struct mtk_ddp_comp {
> struct clk *clk;
> void __iomem *regs;
> @@ -85,6 +89,7 @@ struct mtk_ddp_comp {
> struct device *larb_dev;
> enum mtk_ddp_comp_id id;
> const struct mtk_ddp_comp_funcs *funcs;
> + const struct mtk_ddp_comp_driver_data *data;
I want to avoid adding this generic pointer here to all mtk_ddp_comp,
since this is only used by the color component.
Instead, define color specific types:
struct mtk_disp_color_data {
unsigned int offset;
};
struct mtk_disp_color {
struct mtk_ddp_comp ddp_comp;
const struct mtk_disp_color_data *data;
};
Then, add another comp_type check and fetch the dev data in
mtk_drm_probe() or maybe mtk_ddp_comp_init().
-Dan
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [PATCH net 00/16] net: fix fixed-link phydev leaks
From: David Miller @ 2016-11-30 4:17 UTC (permalink / raw)
To: johan
Cc: vbridger, f.fainelli, fugang.duan, pantelis.antoniou, vbordug,
claudiu.manoil, leoli, thomas.petazzoni, nbd, blogic,
matthias.bgg, sergei.shtylyov, lars.persson, mugunthanvnm,
grygorii.strashko, robh+dt, frowand.list, andrew, vivien.didelot,
netdev, nios2-dev, linux-kernel, linuxppc-dev, linux-mediatek,
linux-renesas-soc, linux-omap, devicetree
In-Reply-To: <1480357509-28074-1-git-send-email-johan@kernel.org>
From: Johan Hovold <johan@kernel.org>
Date: Mon, 28 Nov 2016 19:24:53 +0100
> This series fixes failures to deregister and free fixed-link phydevs
> that have been registered using the of_phy_register_fixed_link()
> interface.
>
> All but two drivers currently fail to do this and this series fixes most
> of them with the exception of a staging driver and the stmmac drivers
> which will be fixed by follow-on patches.
>
> Included are also a couple of fixes for related of-node leaks.
>
> Note that all patches except the of_mdio one have been compile-tested
> only.
>
> Also note that the series is against net due to dependencies not yet in
> net-next.
Series applied, thanks Johan.
^ permalink raw reply
* [PATCH v8 4/4] vcodec: mediatek: Add Maintainers entry for Mediatek JPEG driver
From: Rick Chang @ 2016-11-30 3:09 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring
Cc: Bin Liu, devicetree-u79uwXL29TY76Z2rM5mHXA, Minghsiu Tsai,
Rick Chang, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-media-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <1480475340-21893-1-git-send-email-rick.chang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Rick Chang <rick.chang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Minghsiu Tsai <minghsiu.tsai-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Bin Liu <bin.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 93e9f42..6f68fb6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7818,6 +7818,13 @@ L: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
S: Maintained
F: drivers/net/ethernet/mediatek/
+MEDIATEK JPEG DRIVER
+M: Rick Chang <rick.chang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+M: Bin Liu <bin.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+S: Supported
+F: drivers/media/platform/mtk-jpeg/
+F: Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
+
MEDIATEK MEDIA DRIVER
M: Tiffany Lin <tiffany.lin-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
M: Andrew-CT Chen <andrew-ct.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
--
1.9.1
^ permalink raw reply related
* [PATCH v8 3/4] arm: dts: mt2701: Add node for Mediatek JPEG Decoder
From: Rick Chang @ 2016-11-30 3:08 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring
Cc: linux-kernel, linux-media, srv_heupstream, linux-mediatek,
linux-arm-kernel, devicetree, Minghsiu Tsai, Rick Chang, Bin Liu
In-Reply-To: <1480475340-21893-1-git-send-email-rick.chang@mediatek.com>
Signed-off-by: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
---
This patch depends on:
CCF "Add clock support for Mediatek MT2701"[1]
iommu and smi "Add the dtsi node of iommu and smi for mt2701"[2]
[1] http://lists.infradead.org/pipermail/linux-mediatek/2016-October/007271.html
[2] https://patchwork.kernel.org/patch/9164013/
---
arch/arm/boot/dts/mt2701.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 8f13c70..4dd5048 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -298,6 +298,20 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
};
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
+
vdecsys: syscon@16000000 {
compatible = "mediatek,mt2701-vdecsys", "syscon";
reg = <0 0x16000000 0 0x1000>;
--
1.9.1
^ permalink raw reply related
* [PATCH v8 2/4] vcodec: mediatek: Add Mediatek JPEG Decoder Driver
From: Rick Chang @ 2016-11-30 3:08 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring
Cc: linux-kernel, linux-media, srv_heupstream, linux-mediatek,
linux-arm-kernel, devicetree, Minghsiu Tsai, Rick Chang, Bin Liu
In-Reply-To: <1480475340-21893-1-git-send-email-rick.chang@mediatek.com>
Add v4l2 driver for Mediatek JPEG Decoder
Signed-off-by: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
---
drivers/media/platform/Kconfig | 15 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/mtk-jpeg/Makefile | 2 +
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 1302 ++++++++++++++++++++++
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h | 139 +++
drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c | 417 +++++++
drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h | 91 ++
drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c | 160 +++
drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h | 25 +
drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h | 58 +
10 files changed, 2211 insertions(+)
create mode 100644 drivers/media/platform/mtk-jpeg/Makefile
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 754edbf1..96c9887 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -162,6 +162,21 @@ config VIDEO_CODA
Coda is a range of video codec IPs that supports
H.264, MPEG-4, and other video formats.
+config VIDEO_MEDIATEK_JPEG
+ tristate "Mediatek JPEG Codec driver"
+ depends on MTK_IOMMU_V1 || COMPILE_TEST
+ depends on VIDEO_DEV && VIDEO_V4L2
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on HAS_DMA
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ ---help---
+ Mediatek jpeg codec driver provides HW capability to decode
+ JPEG format
+
+ To compile this driver as a module, choose M here: the
+ module will be called mtk-jpeg
+
config VIDEO_MEDIATEK_VPU
tristate "Mediatek Video Processor Unit"
depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index f842933..cf701e3 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -68,3 +68,5 @@ obj-$(CONFIG_VIDEO_MEDIATEK_VPU) += mtk-vpu/
obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec/
obj-$(CONFIG_VIDEO_MEDIATEK_MDP) += mtk-mdp/
+
+obj-$(CONFIG_VIDEO_MEDIATEK_JPEG) += mtk-jpeg/
diff --git a/drivers/media/platform/mtk-jpeg/Makefile b/drivers/media/platform/mtk-jpeg/Makefile
new file mode 100644
index 0000000..b2e6069
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/Makefile
@@ -0,0 +1,2 @@
+mtk_jpeg-objs := mtk_jpeg_core.o mtk_jpeg_hw.o mtk_jpeg_parse.o
+obj-$(CONFIG_VIDEO_MEDIATEK_JPEG) += mtk_jpeg.o
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
new file mode 100644
index 0000000..63a8994
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -0,0 +1,1302 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/spinlock.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-mem2mem.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-dma-contig.h>
+#include <soc/mediatek/smi.h>
+
+#include "mtk_jpeg_hw.h"
+#include "mtk_jpeg_core.h"
+#include "mtk_jpeg_parse.h"
+
+static struct mtk_jpeg_fmt mtk_jpeg_formats[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_JPEG,
+ .colplanes = 1,
+ .flags = MTK_JPEG_FMT_FLAG_DEC_OUTPUT,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUV420M,
+ .h_sample = {4, 2, 2},
+ .v_sample = {4, 2, 2},
+ .colplanes = 3,
+ .h_align = 5,
+ .v_align = 4,
+ .flags = MTK_JPEG_FMT_FLAG_DEC_CAPTURE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUV422M,
+ .h_sample = {4, 2, 2},
+ .v_sample = {4, 4, 4},
+ .colplanes = 3,
+ .h_align = 5,
+ .v_align = 3,
+ .flags = MTK_JPEG_FMT_FLAG_DEC_CAPTURE,
+ },
+};
+
+#define MTK_JPEG_NUM_FORMATS ARRAY_SIZE(mtk_jpeg_formats)
+
+enum {
+ MTK_JPEG_BUF_FLAGS_INIT = 0,
+ MTK_JPEG_BUF_FLAGS_LAST_FRAME = 1,
+};
+
+struct mtk_jpeg_src_buf {
+ struct vb2_v4l2_buffer b;
+ struct list_head list;
+ int flags;
+ struct mtk_jpeg_dec_param dec_param;
+};
+
+static int debug;
+module_param(debug, int, 0644);
+
+static inline struct mtk_jpeg_ctx *mtk_jpeg_fh_to_ctx(struct v4l2_fh *fh)
+{
+ return container_of(fh, struct mtk_jpeg_ctx, fh);
+}
+
+static inline struct mtk_jpeg_src_buf *mtk_jpeg_vb2_to_srcbuf(
+ struct vb2_buffer *vb)
+{
+ return container_of(to_vb2_v4l2_buffer(vb), struct mtk_jpeg_src_buf, b);
+}
+
+static int mtk_jpeg_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct mtk_jpeg_dev *jpeg = video_drvdata(file);
+
+ strlcpy(cap->driver, MTK_JPEG_NAME " decoder", sizeof(cap->driver));
+ strlcpy(cap->card, MTK_JPEG_NAME " decoder", sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+ dev_name(jpeg->dev));
+
+ return 0;
+}
+
+static int mtk_jpeg_enum_fmt(struct mtk_jpeg_fmt *mtk_jpeg_formats, int n,
+ struct v4l2_fmtdesc *f, u32 type)
+{
+ int i, num = 0;
+
+ for (i = 0; i < n; ++i) {
+ if (mtk_jpeg_formats[i].flags & type) {
+ if (num == f->index)
+ break;
+ ++num;
+ }
+ }
+
+ if (i >= n)
+ return -EINVAL;
+
+ f->pixelformat = mtk_jpeg_formats[i].fourcc;
+
+ return 0;
+}
+
+static int mtk_jpeg_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ return mtk_jpeg_enum_fmt(mtk_jpeg_formats, MTK_JPEG_NUM_FORMATS, f,
+ MTK_JPEG_FMT_FLAG_DEC_CAPTURE);
+}
+
+static int mtk_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ return mtk_jpeg_enum_fmt(mtk_jpeg_formats, MTK_JPEG_NUM_FORMATS, f,
+ MTK_JPEG_FMT_FLAG_DEC_OUTPUT);
+}
+
+static struct mtk_jpeg_q_data *mtk_jpeg_get_q_data(struct mtk_jpeg_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ if (V4L2_TYPE_IS_OUTPUT(type))
+ return &ctx->out_q;
+ return &ctx->cap_q;
+}
+
+static struct mtk_jpeg_fmt *mtk_jpeg_find_format(struct mtk_jpeg_ctx *ctx,
+ u32 pixelformat,
+ unsigned int fmt_type)
+{
+ unsigned int k, fmt_flag;
+
+ fmt_flag = (fmt_type == MTK_JPEG_FMT_TYPE_OUTPUT) ?
+ MTK_JPEG_FMT_FLAG_DEC_OUTPUT :
+ MTK_JPEG_FMT_FLAG_DEC_CAPTURE;
+
+ for (k = 0; k < MTK_JPEG_NUM_FORMATS; k++) {
+ struct mtk_jpeg_fmt *fmt = &mtk_jpeg_formats[k];
+
+ if (fmt->fourcc == pixelformat && fmt->flags & fmt_flag)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static void mtk_jpeg_bound_align_image(u32 *w, unsigned int wmin,
+ unsigned int wmax, unsigned int walign,
+ u32 *h, unsigned int hmin,
+ unsigned int hmax, unsigned int halign)
+{
+ int width, height, w_step, h_step;
+
+ width = *w;
+ height = *h;
+ w_step = 1 << walign;
+ h_step = 1 << halign;
+
+ v4l_bound_align_image(w, wmin, wmax, walign, h, hmin, hmax, halign, 0);
+ if (*w < width && (*w + w_step) <= wmax)
+ *w += w_step;
+ if (*h < height && (*h + h_step) <= hmax)
+ *h += h_step;
+}
+
+static void mtk_jpeg_adjust_fmt_mplane(struct mtk_jpeg_ctx *ctx,
+ struct v4l2_format *f)
+{
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ struct mtk_jpeg_q_data *q_data;
+ int i;
+
+ q_data = mtk_jpeg_get_q_data(ctx, f->type);
+
+ pix_mp->width = q_data->w;
+ pix_mp->height = q_data->h;
+ pix_mp->pixelformat = q_data->fmt->fourcc;
+ pix_mp->num_planes = q_data->fmt->colplanes;
+
+ for (i = 0; i < pix_mp->num_planes; i++) {
+ pix_mp->plane_fmt[i].bytesperline = q_data->bytesperline[i];
+ pix_mp->plane_fmt[i].sizeimage = q_data->sizeimage[i];
+ }
+}
+
+static int mtk_jpeg_try_fmt_mplane(struct v4l2_format *f,
+ struct mtk_jpeg_fmt *fmt,
+ struct mtk_jpeg_ctx *ctx, int q_type)
+{
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ int i;
+
+ memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved));
+ pix_mp->field = V4L2_FIELD_NONE;
+
+ if (ctx->state != MTK_JPEG_INIT) {
+ mtk_jpeg_adjust_fmt_mplane(ctx, f);
+ goto end;
+ }
+
+ pix_mp->num_planes = fmt->colplanes;
+ pix_mp->pixelformat = fmt->fourcc;
+
+ if (q_type == MTK_JPEG_FMT_TYPE_OUTPUT) {
+ struct v4l2_plane_pix_format *pfmt = &pix_mp->plane_fmt[0];
+
+ mtk_jpeg_bound_align_image(&pix_mp->width, MTK_JPEG_MIN_WIDTH,
+ MTK_JPEG_MAX_WIDTH, 0,
+ &pix_mp->height, MTK_JPEG_MIN_HEIGHT,
+ MTK_JPEG_MAX_HEIGHT, 0);
+
+ memset(pfmt->reserved, 0, sizeof(pfmt->reserved));
+ pfmt->bytesperline = 0;
+ /* Source size must be aligned to 128 */
+ pfmt->sizeimage = mtk_jpeg_align(pfmt->sizeimage, 128);
+ if (pfmt->sizeimage == 0)
+ pfmt->sizeimage = MTK_JPEG_DEFAULT_SIZEIMAGE;
+ goto end;
+ }
+
+ /* type is MTK_JPEG_FMT_TYPE_CAPTURE */
+ mtk_jpeg_bound_align_image(&pix_mp->width, MTK_JPEG_MIN_WIDTH,
+ MTK_JPEG_MAX_WIDTH, fmt->h_align,
+ &pix_mp->height, MTK_JPEG_MIN_HEIGHT,
+ MTK_JPEG_MAX_HEIGHT, fmt->v_align);
+
+ for (i = 0; i < fmt->colplanes; i++) {
+ struct v4l2_plane_pix_format *pfmt = &pix_mp->plane_fmt[i];
+ u32 stride = pix_mp->width * fmt->h_sample[i] / 4;
+ u32 h = pix_mp->height * fmt->v_sample[i] / 4;
+
+ memset(pfmt->reserved, 0, sizeof(pfmt->reserved));
+ pfmt->bytesperline = stride;
+ pfmt->sizeimage = stride * h;
+ }
+end:
+ v4l2_dbg(2, debug, &jpeg->v4l2_dev, "wxh:%ux%u\n",
+ pix_mp->width, pix_mp->height);
+ for (i = 0; i < pix_mp->num_planes; i++) {
+ v4l2_dbg(2, debug, &jpeg->v4l2_dev,
+ "plane[%d] bpl=%u, size=%u\n",
+ i,
+ pix_mp->plane_fmt[i].bytesperline,
+ pix_mp->plane_fmt[i].sizeimage);
+ }
+ return 0;
+}
+
+static int mtk_jpeg_g_fmt_vid_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct vb2_queue *vq;
+ struct mtk_jpeg_q_data *q_data = NULL;
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ int i;
+
+ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+ if (!vq)
+ return -EINVAL;
+
+ q_data = mtk_jpeg_get_q_data(ctx, f->type);
+
+ memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved));
+ pix_mp->width = q_data->w;
+ pix_mp->height = q_data->h;
+ pix_mp->field = V4L2_FIELD_NONE;
+ pix_mp->pixelformat = q_data->fmt->fourcc;
+ pix_mp->num_planes = q_data->fmt->colplanes;
+ pix_mp->colorspace = ctx->colorspace;
+ pix_mp->ycbcr_enc = ctx->ycbcr_enc;
+ pix_mp->xfer_func = ctx->xfer_func;
+ pix_mp->quantization = ctx->quantization;
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "(%d) g_fmt:%c%c%c%c wxh:%ux%u\n",
+ f->type,
+ (pix_mp->pixelformat & 0xff),
+ (pix_mp->pixelformat >> 8 & 0xff),
+ (pix_mp->pixelformat >> 16 & 0xff),
+ (pix_mp->pixelformat >> 24 & 0xff),
+ pix_mp->width, pix_mp->height);
+
+ for (i = 0; i < pix_mp->num_planes; i++) {
+ struct v4l2_plane_pix_format *pfmt = &pix_mp->plane_fmt[i];
+
+ pfmt->bytesperline = q_data->bytesperline[i];
+ pfmt->sizeimage = q_data->sizeimage[i];
+ memset(pfmt->reserved, 0, sizeof(pfmt->reserved));
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev,
+ "plane[%d] bpl=%u, size=%u\n",
+ i,
+ pfmt->bytesperline,
+ pfmt->sizeimage);
+ }
+ return 0;
+}
+
+static int mtk_jpeg_try_fmt_vid_cap_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+ struct mtk_jpeg_fmt *fmt;
+
+ fmt = mtk_jpeg_find_format(ctx, f->fmt.pix_mp.pixelformat,
+ MTK_JPEG_FMT_TYPE_CAPTURE);
+ if (!fmt)
+ fmt = ctx->cap_q.fmt;
+
+ v4l2_dbg(2, debug, &ctx->jpeg->v4l2_dev, "(%d) try_fmt:%c%c%c%c\n",
+ f->type,
+ (fmt->fourcc & 0xff),
+ (fmt->fourcc >> 8 & 0xff),
+ (fmt->fourcc >> 16 & 0xff),
+ (fmt->fourcc >> 24 & 0xff));
+
+ return mtk_jpeg_try_fmt_mplane(f, fmt, ctx, MTK_JPEG_FMT_TYPE_CAPTURE);
+}
+
+static int mtk_jpeg_try_fmt_vid_out_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+ struct mtk_jpeg_fmt *fmt;
+
+ fmt = mtk_jpeg_find_format(ctx, f->fmt.pix_mp.pixelformat,
+ MTK_JPEG_FMT_TYPE_OUTPUT);
+ if (!fmt)
+ fmt = ctx->out_q.fmt;
+
+ v4l2_dbg(2, debug, &ctx->jpeg->v4l2_dev, "(%d) try_fmt:%c%c%c%c\n",
+ f->type,
+ (fmt->fourcc & 0xff),
+ (fmt->fourcc >> 8 & 0xff),
+ (fmt->fourcc >> 16 & 0xff),
+ (fmt->fourcc >> 24 & 0xff));
+
+ return mtk_jpeg_try_fmt_mplane(f, fmt, ctx, MTK_JPEG_FMT_TYPE_OUTPUT);
+}
+
+static int mtk_jpeg_s_fmt_mplane(struct mtk_jpeg_ctx *ctx,
+ struct v4l2_format *f)
+{
+ struct vb2_queue *vq;
+ struct mtk_jpeg_q_data *q_data = NULL;
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ unsigned int f_type;
+ int i;
+
+ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+ if (!vq)
+ return -EINVAL;
+
+ q_data = mtk_jpeg_get_q_data(ctx, f->type);
+
+ if (vb2_is_busy(vq)) {
+ v4l2_err(&jpeg->v4l2_dev, "queue busy\n");
+ return -EBUSY;
+ }
+
+ f_type = V4L2_TYPE_IS_OUTPUT(f->type) ?
+ MTK_JPEG_FMT_TYPE_OUTPUT : MTK_JPEG_FMT_TYPE_CAPTURE;
+
+ q_data->fmt = mtk_jpeg_find_format(ctx, pix_mp->pixelformat, f_type);
+ q_data->w = pix_mp->width;
+ q_data->h = pix_mp->height;
+ ctx->colorspace = pix_mp->colorspace;
+ ctx->ycbcr_enc = pix_mp->ycbcr_enc;
+ ctx->xfer_func = pix_mp->xfer_func;
+ ctx->quantization = pix_mp->quantization;
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "(%d) s_fmt:%c%c%c%c wxh:%ux%u\n",
+ f->type,
+ (q_data->fmt->fourcc & 0xff),
+ (q_data->fmt->fourcc >> 8 & 0xff),
+ (q_data->fmt->fourcc >> 16 & 0xff),
+ (q_data->fmt->fourcc >> 24 & 0xff),
+ q_data->w, q_data->h);
+
+ for (i = 0; i < q_data->fmt->colplanes; i++) {
+ q_data->bytesperline[i] = pix_mp->plane_fmt[i].bytesperline;
+ q_data->sizeimage[i] = pix_mp->plane_fmt[i].sizeimage;
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev,
+ "plane[%d] bpl=%u, size=%u\n",
+ i, q_data->bytesperline[i], q_data->sizeimage[i]);
+ }
+
+ return 0;
+}
+
+static int mtk_jpeg_s_fmt_vid_out_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ int ret;
+
+ ret = mtk_jpeg_try_fmt_vid_out_mplane(file, priv, f);
+ if (ret)
+ return ret;
+
+ return mtk_jpeg_s_fmt_mplane(mtk_jpeg_fh_to_ctx(priv), f);
+}
+
+static int mtk_jpeg_s_fmt_vid_cap_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ int ret;
+
+ ret = mtk_jpeg_try_fmt_vid_cap_mplane(file, priv, f);
+ if (ret)
+ return ret;
+
+ return mtk_jpeg_s_fmt_mplane(mtk_jpeg_fh_to_ctx(priv), f);
+}
+
+static void mtk_jpeg_queue_src_chg_event(struct mtk_jpeg_ctx *ctx)
+{
+ static const struct v4l2_event ev_src_ch = {
+ .type = V4L2_EVENT_SOURCE_CHANGE,
+ .u.src_change.changes =
+ V4L2_EVENT_SRC_CH_RESOLUTION,
+ };
+
+ v4l2_event_queue_fh(&ctx->fh, &ev_src_ch);
+}
+
+static int mtk_jpeg_subscribe_event(struct v4l2_fh *fh,
+ const struct v4l2_event_subscription *sub)
+{
+ switch (sub->type) {
+ case V4L2_EVENT_SOURCE_CHANGE:
+ return v4l2_src_change_event_subscribe(fh, sub);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mtk_jpeg_g_selection(struct file *file, void *priv,
+ struct v4l2_selection *s)
+{
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+
+ if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ switch (s->target) {
+ case V4L2_SEL_TGT_COMPOSE:
+ case V4L2_SEL_TGT_COMPOSE_DEFAULT:
+ s->r.width = ctx->out_q.w;
+ s->r.height = ctx->out_q.h;
+ s->r.left = 0;
+ s->r.top = 0;
+ break;
+ case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+ case V4L2_SEL_TGT_COMPOSE_PADDED:
+ s->r.width = ctx->cap_q.w;
+ s->r.height = ctx->cap_q.h;
+ s->r.left = 0;
+ s->r.top = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int mtk_jpeg_s_selection(struct file *file, void *priv,
+ struct v4l2_selection *s)
+{
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+
+ if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ switch (s->target) {
+ case V4L2_SEL_TGT_COMPOSE:
+ s->r.left = 0;
+ s->r.top = 0;
+ s->r.width = ctx->out_q.w;
+ s->r.height = ctx->out_q.h;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int mtk_jpeg_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+ struct v4l2_fh *fh = file->private_data;
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+ struct vb2_queue *vq;
+ struct vb2_buffer *vb;
+ struct mtk_jpeg_src_buf *jpeg_src_buf;
+
+ if (buf->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+ goto end;
+
+ vq = v4l2_m2m_get_vq(fh->m2m_ctx, buf->type);
+ if (buf->index >= vq->num_buffers) {
+ dev_err(ctx->jpeg->dev, "buffer index out of range\n");
+ return -EINVAL;
+ }
+
+ vb = vq->bufs[buf->index];
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(vb);
+ jpeg_src_buf->flags = (buf->m.planes[0].bytesused == 0) ?
+ MTK_JPEG_BUF_FLAGS_LAST_FRAME : MTK_JPEG_BUF_FLAGS_INIT;
+end:
+ return v4l2_m2m_qbuf(file, fh->m2m_ctx, buf);
+}
+
+static const struct v4l2_ioctl_ops mtk_jpeg_ioctl_ops = {
+ .vidioc_querycap = mtk_jpeg_querycap,
+ .vidioc_enum_fmt_vid_cap_mplane = mtk_jpeg_enum_fmt_vid_cap,
+ .vidioc_enum_fmt_vid_out_mplane = mtk_jpeg_enum_fmt_vid_out,
+ .vidioc_try_fmt_vid_cap_mplane = mtk_jpeg_try_fmt_vid_cap_mplane,
+ .vidioc_try_fmt_vid_out_mplane = mtk_jpeg_try_fmt_vid_out_mplane,
+ .vidioc_g_fmt_vid_cap_mplane = mtk_jpeg_g_fmt_vid_mplane,
+ .vidioc_g_fmt_vid_out_mplane = mtk_jpeg_g_fmt_vid_mplane,
+ .vidioc_s_fmt_vid_cap_mplane = mtk_jpeg_s_fmt_vid_cap_mplane,
+ .vidioc_s_fmt_vid_out_mplane = mtk_jpeg_s_fmt_vid_out_mplane,
+ .vidioc_qbuf = mtk_jpeg_qbuf,
+ .vidioc_subscribe_event = mtk_jpeg_subscribe_event,
+ .vidioc_g_selection = mtk_jpeg_g_selection,
+ .vidioc_s_selection = mtk_jpeg_s_selection,
+
+ .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs,
+ .vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf,
+ .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs,
+ .vidioc_querybuf = v4l2_m2m_ioctl_querybuf,
+ .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf,
+ .vidioc_expbuf = v4l2_m2m_ioctl_expbuf,
+ .vidioc_streamon = v4l2_m2m_ioctl_streamon,
+ .vidioc_streamoff = v4l2_m2m_ioctl_streamoff,
+
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static int mtk_jpeg_queue_setup(struct vb2_queue *q,
+ unsigned int *num_buffers,
+ unsigned int *num_planes,
+ unsigned int sizes[],
+ struct device *alloc_ctxs[])
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
+ struct mtk_jpeg_q_data *q_data = NULL;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ int i;
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "(%d) buf_req count=%u\n",
+ q->type, *num_buffers);
+
+ q_data = mtk_jpeg_get_q_data(ctx, q->type);
+ if (!q_data)
+ return -EINVAL;
+
+ *num_planes = q_data->fmt->colplanes;
+ for (i = 0; i < q_data->fmt->colplanes; i++) {
+ sizes[i] = q_data->sizeimage[i];
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "sizeimage[%d]=%u\n",
+ i, sizes[i]);
+ }
+
+ return 0;
+}
+
+static int mtk_jpeg_buf_prepare(struct vb2_buffer *vb)
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+ struct mtk_jpeg_q_data *q_data = NULL;
+ int i;
+
+ q_data = mtk_jpeg_get_q_data(ctx, vb->vb2_queue->type);
+ if (!q_data)
+ return -EINVAL;
+
+ for (i = 0; i < q_data->fmt->colplanes; i++)
+ vb2_set_plane_payload(vb, i, q_data->sizeimage[i]);
+
+ return 0;
+}
+
+static bool mtk_jpeg_check_resolution_change(struct mtk_jpeg_ctx *ctx,
+ struct mtk_jpeg_dec_param *param)
+{
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct mtk_jpeg_q_data *q_data;
+
+ q_data = &ctx->out_q;
+ if (q_data->w != param->pic_w || q_data->h != param->pic_h) {
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "Picture size change\n");
+ return true;
+ }
+
+ q_data = &ctx->cap_q;
+ if (q_data->fmt != mtk_jpeg_find_format(ctx, param->dst_fourcc,
+ MTK_JPEG_FMT_TYPE_CAPTURE)) {
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "format change\n");
+ return true;
+ }
+ return false;
+}
+
+static void mtk_jpeg_set_queue_data(struct mtk_jpeg_ctx *ctx,
+ struct mtk_jpeg_dec_param *param)
+{
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct mtk_jpeg_q_data *q_data;
+ int i;
+
+ q_data = &ctx->out_q;
+ q_data->w = param->pic_w;
+ q_data->h = param->pic_h;
+
+ q_data = &ctx->cap_q;
+ q_data->w = param->dec_w;
+ q_data->h = param->dec_h;
+ q_data->fmt = mtk_jpeg_find_format(ctx,
+ param->dst_fourcc,
+ MTK_JPEG_FMT_TYPE_CAPTURE);
+
+ for (i = 0; i < q_data->fmt->colplanes; i++) {
+ q_data->bytesperline[i] = param->mem_stride[i];
+ q_data->sizeimage[i] = param->comp_size[i];
+ }
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev,
+ "set_parse cap:%c%c%c%c pic(%u, %u), buf(%u, %u)\n",
+ (param->dst_fourcc & 0xff),
+ (param->dst_fourcc >> 8 & 0xff),
+ (param->dst_fourcc >> 16 & 0xff),
+ (param->dst_fourcc >> 24 & 0xff),
+ param->pic_w, param->pic_h,
+ param->dec_w, param->dec_h);
+}
+
+static void mtk_jpeg_buf_queue(struct vb2_buffer *vb)
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+ struct mtk_jpeg_dec_param *param;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct mtk_jpeg_src_buf *jpeg_src_buf;
+ bool header_valid;
+
+ v4l2_dbg(2, debug, &jpeg->v4l2_dev, "(%d) buf_q id=%d, vb=%p\n",
+ vb->vb2_queue->type, vb->index, vb);
+
+ if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+ goto end;
+
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(vb);
+ param = &jpeg_src_buf->dec_param;
+ memset(param, 0, sizeof(*param));
+
+ if (jpeg_src_buf->flags & MTK_JPEG_BUF_FLAGS_LAST_FRAME) {
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "Got eos\n");
+ goto end;
+ }
+ header_valid = mtk_jpeg_parse(param, (u8 *)vb2_plane_vaddr(vb, 0),
+ vb2_get_plane_payload(vb, 0));
+ if (!header_valid) {
+ v4l2_err(&jpeg->v4l2_dev, "Header invalid.\n");
+ vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
+ return;
+ }
+
+ if (ctx->state == MTK_JPEG_INIT) {
+ mtk_jpeg_queue_src_chg_event(ctx);
+ mtk_jpeg_set_queue_data(ctx, param);
+ ctx->state = MTK_JPEG_RUNNING;
+ }
+end:
+ v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, to_vb2_v4l2_buffer(vb));
+}
+
+static void *mtk_jpeg_buf_remove(struct mtk_jpeg_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ if (V4L2_TYPE_IS_OUTPUT(type))
+ return v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+ else
+ return v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+}
+
+static int mtk_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
+ struct vb2_buffer *vb;
+ int ret = 0;
+
+ ret = pm_runtime_get_sync(ctx->jpeg->dev);
+ if (ret < 0)
+ goto err;
+
+ return 0;
+err:
+ while ((vb = mtk_jpeg_buf_remove(ctx, q->type)))
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(vb), VB2_BUF_STATE_QUEUED);
+ return ret;
+}
+
+static void mtk_jpeg_stop_streaming(struct vb2_queue *q)
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
+ struct vb2_buffer *vb;
+
+ /*
+ * STREAMOFF is an acknowledgment for source change event.
+ * Before STREAMOFF, we still have to return the old resolution and
+ * subsampling. Update capture queue when the stream is off.
+ */
+ if (ctx->state == MTK_JPEG_SOURCE_CHANGE &&
+ !V4L2_TYPE_IS_OUTPUT(q->type)) {
+ struct mtk_jpeg_src_buf *src_buf;
+
+ vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ src_buf = mtk_jpeg_vb2_to_srcbuf(vb);
+ mtk_jpeg_set_queue_data(ctx, &src_buf->dec_param);
+ ctx->state = MTK_JPEG_RUNNING;
+ } else if (V4L2_TYPE_IS_OUTPUT(q->type)) {
+ ctx->state = MTK_JPEG_INIT;
+ }
+
+ while ((vb = mtk_jpeg_buf_remove(ctx, q->type)))
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(vb), VB2_BUF_STATE_ERROR);
+
+ pm_runtime_put_sync(ctx->jpeg->dev);
+}
+
+static struct vb2_ops mtk_jpeg_qops = {
+ .queue_setup = mtk_jpeg_queue_setup,
+ .buf_prepare = mtk_jpeg_buf_prepare,
+ .buf_queue = mtk_jpeg_buf_queue,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+ .start_streaming = mtk_jpeg_start_streaming,
+ .stop_streaming = mtk_jpeg_stop_streaming,
+};
+
+static void mtk_jpeg_set_dec_src(struct mtk_jpeg_ctx *ctx,
+ struct vb2_buffer *src_buf,
+ struct mtk_jpeg_bs *bs)
+{
+ bs->str_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0);
+ bs->end_addr = bs->str_addr +
+ mtk_jpeg_align(vb2_get_plane_payload(src_buf, 0), 16);
+ bs->size = mtk_jpeg_align(vb2_plane_size(src_buf, 0), 128);
+}
+
+static int mtk_jpeg_set_dec_dst(struct mtk_jpeg_ctx *ctx,
+ struct mtk_jpeg_dec_param *param,
+ struct vb2_buffer *dst_buf,
+ struct mtk_jpeg_fb *fb)
+{
+ int i;
+
+ if (param->comp_num != dst_buf->num_planes) {
+ dev_err(ctx->jpeg->dev, "plane number mismatch (%u != %u)\n",
+ param->comp_num, dst_buf->num_planes);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < dst_buf->num_planes; i++) {
+ if (vb2_plane_size(dst_buf, i) < param->comp_size[i]) {
+ dev_err(ctx->jpeg->dev,
+ "buffer size is underflow (%lu < %u)\n",
+ vb2_plane_size(dst_buf, 0),
+ param->comp_size[i]);
+ return -EINVAL;
+ }
+ fb->plane_addr[i] = vb2_dma_contig_plane_dma_addr(dst_buf, i);
+ }
+
+ return 0;
+}
+
+static void mtk_jpeg_device_run(void *priv)
+{
+ struct mtk_jpeg_ctx *ctx = priv;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct vb2_buffer *src_buf, *dst_buf;
+ enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR;
+ unsigned long flags;
+ struct mtk_jpeg_src_buf *jpeg_src_buf;
+ struct mtk_jpeg_bs bs;
+ struct mtk_jpeg_fb fb;
+ int i;
+
+ src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(src_buf);
+
+ if (jpeg_src_buf->flags & MTK_JPEG_BUF_FLAGS_LAST_FRAME) {
+ for (i = 0; i < dst_buf->num_planes; i++)
+ vb2_set_plane_payload(dst_buf, i, 0);
+ buf_state = VB2_BUF_STATE_DONE;
+ goto dec_end;
+ }
+
+ if (mtk_jpeg_check_resolution_change(ctx, &jpeg_src_buf->dec_param)) {
+ mtk_jpeg_queue_src_chg_event(ctx);
+ ctx->state = MTK_JPEG_SOURCE_CHANGE;
+ v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+ return;
+ }
+
+ mtk_jpeg_set_dec_src(ctx, src_buf, &bs);
+ if (mtk_jpeg_set_dec_dst(ctx, &jpeg_src_buf->dec_param, dst_buf, &fb))
+ goto dec_end;
+
+ spin_lock_irqsave(&jpeg->hw_lock, flags);
+ mtk_jpeg_dec_reset(jpeg->dec_reg_base);
+ mtk_jpeg_dec_set_config(jpeg->dec_reg_base,
+ &jpeg_src_buf->dec_param, &bs, &fb);
+
+ mtk_jpeg_dec_start(jpeg->dec_reg_base);
+ spin_unlock_irqrestore(&jpeg->hw_lock, flags);
+ return;
+
+dec_end:
+ v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+ v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), buf_state);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), buf_state);
+ v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+}
+
+static int mtk_jpeg_job_ready(void *priv)
+{
+ struct mtk_jpeg_ctx *ctx = priv;
+
+ return (ctx->state == MTK_JPEG_RUNNING) ? 1 : 0;
+}
+
+static void mtk_jpeg_job_abort(void *priv)
+{
+ struct mtk_jpeg_ctx *ctx = priv;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct vb2_buffer *src_buf, *dst_buf;
+
+ src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+ dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), VB2_BUF_STATE_ERROR);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), VB2_BUF_STATE_ERROR);
+ v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+}
+
+static struct v4l2_m2m_ops mtk_jpeg_m2m_ops = {
+ .device_run = mtk_jpeg_device_run,
+ .job_ready = mtk_jpeg_job_ready,
+ .job_abort = mtk_jpeg_job_abort,
+};
+
+static int mtk_jpeg_queue_init(void *priv, struct vb2_queue *src_vq,
+ struct vb2_queue *dst_vq)
+{
+ struct mtk_jpeg_ctx *ctx = priv;
+ int ret;
+
+ src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
+ src_vq->io_modes = VB2_DMABUF | VB2_MMAP;
+ src_vq->drv_priv = ctx;
+ src_vq->buf_struct_size = sizeof(struct mtk_jpeg_src_buf);
+ src_vq->ops = &mtk_jpeg_qops;
+ src_vq->mem_ops = &vb2_dma_contig_memops;
+ src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+ src_vq->lock = &ctx->jpeg->lock;
+ src_vq->dev = ctx->jpeg->dev;
+ ret = vb2_queue_init(src_vq);
+ if (ret)
+ return ret;
+
+ dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+ dst_vq->io_modes = VB2_DMABUF | VB2_MMAP;
+ dst_vq->drv_priv = ctx;
+ dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+ dst_vq->ops = &mtk_jpeg_qops;
+ dst_vq->mem_ops = &vb2_dma_contig_memops;
+ dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+ dst_vq->lock = &ctx->jpeg->lock;
+ dst_vq->dev = ctx->jpeg->dev;
+ ret = vb2_queue_init(dst_vq);
+
+ return ret;
+}
+
+static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
+{
+ int ret;
+
+ ret = mtk_smi_larb_get(jpeg->larb);
+ if (ret)
+ dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
+ clk_prepare_enable(jpeg->clk_jdec_smi);
+ clk_prepare_enable(jpeg->clk_jdec);
+}
+
+static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
+{
+ clk_disable_unprepare(jpeg->clk_jdec);
+ clk_disable_unprepare(jpeg->clk_jdec_smi);
+ mtk_smi_larb_put(jpeg->larb);
+}
+
+static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
+{
+ struct mtk_jpeg_dev *jpeg = priv;
+ struct mtk_jpeg_ctx *ctx;
+ struct vb2_buffer *src_buf, *dst_buf;
+ struct mtk_jpeg_src_buf *jpeg_src_buf;
+ enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR;
+ u32 dec_irq_ret;
+ u32 dec_ret;
+ int i;
+
+ ctx = v4l2_m2m_get_curr_priv(jpeg->m2m_dev);
+ if (!ctx) {
+ v4l2_err(&jpeg->v4l2_dev, "Context is NULL\n");
+ return IRQ_HANDLED;
+ }
+
+ src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+ dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(src_buf);
+
+ dec_ret = mtk_jpeg_dec_get_int_status(jpeg->dec_reg_base);
+ dec_irq_ret = mtk_jpeg_dec_enum_result(dec_ret);
+
+ if (dec_irq_ret >= MTK_JPEG_DEC_RESULT_UNDERFLOW)
+ mtk_jpeg_dec_reset(jpeg->dec_reg_base);
+
+ if (dec_irq_ret != MTK_JPEG_DEC_RESULT_EOF_DONE) {
+ dev_err(jpeg->dev, "decode failed\n");
+ goto dec_end;
+ }
+
+ for (i = 0; i < dst_buf->num_planes; i++)
+ vb2_set_plane_payload(dst_buf, i,
+ jpeg_src_buf->dec_param.comp_size[i]);
+
+ buf_state = VB2_BUF_STATE_DONE;
+
+dec_end:
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), buf_state);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), buf_state);
+ v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+ return IRQ_HANDLED;
+}
+
+static void mtk_jpeg_set_default_params(struct mtk_jpeg_ctx *ctx)
+{
+ struct mtk_jpeg_q_data *q = &ctx->out_q;
+ int i;
+
+ ctx->colorspace = V4L2_COLORSPACE_JPEG,
+ ctx->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+ ctx->quantization = V4L2_QUANTIZATION_DEFAULT;
+ ctx->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+
+ q->fmt = mtk_jpeg_find_format(ctx, V4L2_PIX_FMT_JPEG,
+ MTK_JPEG_FMT_TYPE_OUTPUT);
+ q->w = MTK_JPEG_MIN_WIDTH;
+ q->h = MTK_JPEG_MIN_HEIGHT;
+ q->bytesperline[0] = 0;
+ q->sizeimage[0] = MTK_JPEG_DEFAULT_SIZEIMAGE;
+
+ q = &ctx->cap_q;
+ q->fmt = mtk_jpeg_find_format(ctx, V4L2_PIX_FMT_YUV420M,
+ MTK_JPEG_FMT_TYPE_CAPTURE);
+ q->w = MTK_JPEG_MIN_WIDTH;
+ q->h = MTK_JPEG_MIN_HEIGHT;
+
+ for (i = 0; i < q->fmt->colplanes; i++) {
+ u32 stride = q->w * q->fmt->h_sample[i] / 4;
+ u32 h = q->h * q->fmt->v_sample[i] / 4;
+
+ q->bytesperline[i] = stride;
+ q->sizeimage[i] = stride * h;
+ }
+}
+
+static int mtk_jpeg_open(struct file *file)
+{
+ struct mtk_jpeg_dev *jpeg = video_drvdata(file);
+ struct video_device *vfd = video_devdata(file);
+ struct mtk_jpeg_ctx *ctx;
+ int ret = 0;
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ if (mutex_lock_interruptible(&jpeg->lock)) {
+ ret = -ERESTARTSYS;
+ goto free;
+ }
+
+ v4l2_fh_init(&ctx->fh, vfd);
+ file->private_data = &ctx->fh;
+ v4l2_fh_add(&ctx->fh);
+
+ ctx->jpeg = jpeg;
+ ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(jpeg->m2m_dev, ctx,
+ mtk_jpeg_queue_init);
+ if (IS_ERR(ctx->fh.m2m_ctx)) {
+ ret = PTR_ERR(ctx->fh.m2m_ctx);
+ goto error;
+ }
+
+ mtk_jpeg_set_default_params(ctx);
+ mutex_unlock(&jpeg->lock);
+ return 0;
+
+error:
+ v4l2_fh_del(&ctx->fh);
+ v4l2_fh_exit(&ctx->fh);
+ mutex_unlock(&jpeg->lock);
+free:
+ kfree(ctx);
+ return ret;
+}
+
+static int mtk_jpeg_release(struct file *file)
+{
+ struct mtk_jpeg_dev *jpeg = video_drvdata(file);
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(file->private_data);
+
+ mutex_lock(&jpeg->lock);
+ v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
+ v4l2_fh_del(&ctx->fh);
+ v4l2_fh_exit(&ctx->fh);
+ kfree(ctx);
+ mutex_unlock(&jpeg->lock);
+ return 0;
+}
+
+static const struct v4l2_file_operations mtk_jpeg_fops = {
+ .owner = THIS_MODULE,
+ .open = mtk_jpeg_open,
+ .release = mtk_jpeg_release,
+ .poll = v4l2_m2m_fop_poll,
+ .unlocked_ioctl = video_ioctl2,
+ .mmap = v4l2_m2m_fop_mmap,
+};
+
+static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
+{
+ struct device_node *node;
+ struct platform_device *pdev;
+
+ node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
+ if (!node)
+ return -EINVAL;
+ pdev = of_find_device_by_node(node);
+ if (WARN_ON(!pdev)) {
+ of_node_put(node);
+ return -EINVAL;
+ }
+ of_node_put(node);
+
+ jpeg->larb = &pdev->dev;
+
+ jpeg->clk_jdec = devm_clk_get(jpeg->dev, "jpgdec");
+ if (IS_ERR(jpeg->clk_jdec))
+ return -EINVAL;
+
+ jpeg->clk_jdec_smi = devm_clk_get(jpeg->dev, "jpgdec-smi");
+ if (IS_ERR(jpeg->clk_jdec_smi))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int mtk_jpeg_probe(struct platform_device *pdev)
+{
+ struct mtk_jpeg_dev *jpeg;
+ struct resource *res;
+ int dec_irq;
+ int ret;
+
+ jpeg = devm_kzalloc(&pdev->dev, sizeof(*jpeg), GFP_KERNEL);
+ if (!jpeg)
+ return -ENOMEM;
+
+ mutex_init(&jpeg->lock);
+ spin_lock_init(&jpeg->hw_lock);
+ jpeg->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ jpeg->dec_reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(jpeg->dec_reg_base)) {
+ ret = PTR_ERR(jpeg->dec_reg_base);
+ return ret;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ dec_irq = platform_get_irq(pdev, 0);
+ if (!res || dec_irq < 0) {
+ dev_err(&pdev->dev, "Failed to get dec_irq %d.\n", dec_irq);
+ ret = -EINVAL;
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev, dec_irq, mtk_jpeg_dec_irq, 0,
+ pdev->name, jpeg);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request dec_irq %d (%d)\n",
+ dec_irq, ret);
+ ret = -EINVAL;
+ goto err_req_irq;
+ }
+
+ ret = mtk_jpeg_clk_init(jpeg);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to init clk, err %d\n", ret);
+ goto err_clk_init;
+ }
+
+ ret = v4l2_device_register(&pdev->dev, &jpeg->v4l2_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register v4l2 device\n");
+ ret = -EINVAL;
+ goto err_dev_register;
+ }
+
+ jpeg->m2m_dev = v4l2_m2m_init(&mtk_jpeg_m2m_ops);
+ if (IS_ERR(jpeg->m2m_dev)) {
+ v4l2_err(&jpeg->v4l2_dev, "Failed to init mem2mem device\n");
+ ret = PTR_ERR(jpeg->m2m_dev);
+ goto err_m2m_init;
+ }
+
+ jpeg->dec_vdev = video_device_alloc();
+ if (!jpeg->dec_vdev) {
+ ret = -ENOMEM;
+ goto err_dec_vdev_alloc;
+ }
+ snprintf(jpeg->dec_vdev->name, sizeof(jpeg->dec_vdev->name),
+ "%s-dec", MTK_JPEG_NAME);
+ jpeg->dec_vdev->fops = &mtk_jpeg_fops;
+ jpeg->dec_vdev->ioctl_ops = &mtk_jpeg_ioctl_ops;
+ jpeg->dec_vdev->minor = -1;
+ jpeg->dec_vdev->release = video_device_release;
+ jpeg->dec_vdev->lock = &jpeg->lock;
+ jpeg->dec_vdev->v4l2_dev = &jpeg->v4l2_dev;
+ jpeg->dec_vdev->vfl_dir = VFL_DIR_M2M;
+ jpeg->dec_vdev->device_caps = V4L2_CAP_STREAMING |
+ V4L2_CAP_VIDEO_M2M_MPLANE;
+
+ ret = video_register_device(jpeg->dec_vdev, VFL_TYPE_GRABBER, 3);
+ if (ret) {
+ v4l2_err(&jpeg->v4l2_dev, "Failed to register video device\n");
+ goto err_dec_vdev_register;
+ }
+
+ video_set_drvdata(jpeg->dec_vdev, jpeg);
+ v4l2_info(&jpeg->v4l2_dev,
+ "decoder device registered as /dev/video%d (%d,%d)\n",
+ jpeg->dec_vdev->num, VIDEO_MAJOR, jpeg->dec_vdev->minor);
+
+ platform_set_drvdata(pdev, jpeg);
+
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+
+err_dec_vdev_register:
+ video_device_release(jpeg->dec_vdev);
+
+err_dec_vdev_alloc:
+ v4l2_m2m_release(jpeg->m2m_dev);
+
+err_m2m_init:
+ v4l2_device_unregister(&jpeg->v4l2_dev);
+
+err_dev_register:
+
+err_clk_init:
+
+err_req_irq:
+
+ return ret;
+}
+
+static int mtk_jpeg_remove(struct platform_device *pdev)
+{
+ struct mtk_jpeg_dev *jpeg = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(&pdev->dev);
+ video_unregister_device(jpeg->dec_vdev);
+ video_device_release(jpeg->dec_vdev);
+ v4l2_m2m_release(jpeg->m2m_dev);
+ v4l2_device_unregister(&jpeg->v4l2_dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int mtk_jpeg_pm_suspend(struct device *dev)
+{
+ struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev);
+
+ mtk_jpeg_dec_reset(jpeg->dec_reg_base);
+ mtk_jpeg_clk_off(jpeg);
+
+ return 0;
+}
+
+static int mtk_jpeg_pm_resume(struct device *dev)
+{
+ struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev);
+
+ mtk_jpeg_clk_on(jpeg);
+ mtk_jpeg_dec_reset(jpeg->dec_reg_base);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_SLEEP
+static int mtk_jpeg_suspend(struct device *dev)
+{
+ int ret;
+
+ if (pm_runtime_suspended(dev))
+ return 0;
+
+ ret = mtk_jpeg_pm_suspend(dev);
+ return ret;
+}
+
+static int mtk_jpeg_resume(struct device *dev)
+{
+ int ret;
+
+ if (pm_runtime_suspended(dev))
+ return 0;
+
+ ret = mtk_jpeg_pm_resume(dev);
+
+ return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops mtk_jpeg_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(mtk_jpeg_suspend, mtk_jpeg_resume)
+ SET_RUNTIME_PM_OPS(mtk_jpeg_pm_suspend, mtk_jpeg_pm_resume, NULL)
+};
+
+static const struct of_device_id mtk_jpeg_match[] = {
+ {
+ .compatible = "mediatek,mt8173-jpgdec",
+ .data = NULL,
+ },
+ {
+ .compatible = "mediatek,mt2701-jpgdec",
+ .data = NULL,
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, mtk_jpeg_match);
+
+static struct platform_driver mtk_jpeg_driver = {
+ .probe = mtk_jpeg_probe,
+ .remove = mtk_jpeg_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = MTK_JPEG_NAME,
+ .of_match_table = mtk_jpeg_match,
+ .pm = &mtk_jpeg_pm_ops,
+ },
+};
+
+module_platform_driver(mtk_jpeg_driver);
+
+MODULE_DESCRIPTION("MediaTek JPEG codec driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
new file mode 100644
index 0000000..1a6cdfd
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
@@ -0,0 +1,139 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MTK_JPEG_CORE_H
+#define _MTK_JPEG_CORE_H
+
+#include <linux/interrupt.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fh.h>
+
+#define MTK_JPEG_NAME "mtk-jpeg"
+
+#define MTK_JPEG_FMT_FLAG_DEC_OUTPUT BIT(0)
+#define MTK_JPEG_FMT_FLAG_DEC_CAPTURE BIT(1)
+
+#define MTK_JPEG_FMT_TYPE_OUTPUT 1
+#define MTK_JPEG_FMT_TYPE_CAPTURE 2
+
+#define MTK_JPEG_MIN_WIDTH 32
+#define MTK_JPEG_MIN_HEIGHT 32
+#define MTK_JPEG_MAX_WIDTH 8192
+#define MTK_JPEG_MAX_HEIGHT 8192
+
+#define MTK_JPEG_DEFAULT_SIZEIMAGE (1 * 1024 * 1024)
+
+enum mtk_jpeg_ctx_state {
+ MTK_JPEG_INIT = 0,
+ MTK_JPEG_RUNNING,
+ MTK_JPEG_SOURCE_CHANGE,
+};
+
+/**
+ * struct mt_jpeg - JPEG IP abstraction
+ * @lock: the mutex protecting this structure
+ * @hw_lock: spinlock protecting the hw device resource
+ * @workqueue: decode work queue
+ * @dev: JPEG device
+ * @v4l2_dev: v4l2 device for mem2mem mode
+ * @m2m_dev: v4l2 mem2mem device data
+ * @alloc_ctx: videobuf2 memory allocator's context
+ * @dec_vdev: video device node for decoder mem2mem mode
+ * @dec_reg_base: JPEG registers mapping
+ * @clk_jdec: JPEG hw working clock
+ * @clk_jdec_smi: JPEG SMI bus clock
+ * @larb: SMI device
+ */
+struct mtk_jpeg_dev {
+ struct mutex lock;
+ spinlock_t hw_lock;
+ struct workqueue_struct *workqueue;
+ struct device *dev;
+ struct v4l2_device v4l2_dev;
+ struct v4l2_m2m_dev *m2m_dev;
+ void *alloc_ctx;
+ struct video_device *dec_vdev;
+ void __iomem *dec_reg_base;
+ struct clk *clk_jdec;
+ struct clk *clk_jdec_smi;
+ struct device *larb;
+};
+
+/**
+ * struct jpeg_fmt - driver's internal color format data
+ * @fourcc: the fourcc code, 0 if not applicable
+ * @h_sample: horizontal sample count of plane in 4 * 4 pixel image
+ * @v_sample: vertical sample count of plane in 4 * 4 pixel image
+ * @colplanes: number of color planes (1 for packed formats)
+ * @h_align: horizontal alignment order (align to 2^h_align)
+ * @v_align: vertical alignment order (align to 2^v_align)
+ * @flags: flags describing format applicability
+ */
+struct mtk_jpeg_fmt {
+ u32 fourcc;
+ int h_sample[VIDEO_MAX_PLANES];
+ int v_sample[VIDEO_MAX_PLANES];
+ int colplanes;
+ int h_align;
+ int v_align;
+ u32 flags;
+};
+
+/**
+ * mtk_jpeg_q_data - parameters of one queue
+ * @fmt: driver-specific format of this queue
+ * @w: image width
+ * @h: image height
+ * @bytesperline: distance in bytes between the leftmost pixels in two adjacent
+ * lines
+ * @sizeimage: image buffer size in bytes
+ */
+struct mtk_jpeg_q_data {
+ struct mtk_jpeg_fmt *fmt;
+ u32 w;
+ u32 h;
+ u32 bytesperline[VIDEO_MAX_PLANES];
+ u32 sizeimage[VIDEO_MAX_PLANES];
+};
+
+/**
+ * mtk_jpeg_ctx - the device context data
+ * @jpeg: JPEG IP device for this context
+ * @out_q: source (output) queue information
+ * @cap_q: destination (capture) queue queue information
+ * @fh: V4L2 file handle
+ * @dec_param parameters for HW decoding
+ * @state: state of the context
+ * @header_valid: set if header has been parsed and valid
+ * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
+ * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding
+ * @quantization: enum v4l2_quantization, colorspace quantization
+ * @xfer_func: enum v4l2_xfer_func, colorspace transfer function
+ */
+struct mtk_jpeg_ctx {
+ struct mtk_jpeg_dev *jpeg;
+ struct mtk_jpeg_q_data out_q;
+ struct mtk_jpeg_q_data cap_q;
+ struct v4l2_fh fh;
+ enum mtk_jpeg_ctx_state state;
+
+ enum v4l2_colorspace colorspace;
+ enum v4l2_ycbcr_encoding ycbcr_enc;
+ enum v4l2_quantization quantization;
+ enum v4l2_xfer_func xfer_func;
+};
+
+#endif /* _MTK_JPEG_CORE_H */
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c
new file mode 100644
index 0000000..77b4cc6
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c
@@ -0,0 +1,417 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <media/videobuf2-core.h>
+
+#include "mtk_jpeg_hw.h"
+
+#define MTK_JPEG_DUNUM_MASK(val) (((val) - 1) & 0x3)
+
+enum mtk_jpeg_color {
+ MTK_JPEG_COLOR_420 = 0x00221111,
+ MTK_JPEG_COLOR_422 = 0x00211111,
+ MTK_JPEG_COLOR_444 = 0x00111111,
+ MTK_JPEG_COLOR_422V = 0x00121111,
+ MTK_JPEG_COLOR_422X2 = 0x00412121,
+ MTK_JPEG_COLOR_422VX2 = 0x00222121,
+ MTK_JPEG_COLOR_400 = 0x00110000
+};
+
+static inline int mtk_jpeg_verify_align(u32 val, int align, u32 reg)
+{
+ if (val & (align - 1)) {
+ pr_err("mtk-jpeg: write reg %x without %d align\n", reg, align);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mtk_jpeg_decide_format(struct mtk_jpeg_dec_param *param)
+{
+ param->src_color = (param->sampling_w[0] << 20) |
+ (param->sampling_h[0] << 16) |
+ (param->sampling_w[1] << 12) |
+ (param->sampling_h[1] << 8) |
+ (param->sampling_w[2] << 4) |
+ (param->sampling_h[2]);
+
+ param->uv_brz_w = 0;
+ switch (param->src_color) {
+ case MTK_JPEG_COLOR_444:
+ param->uv_brz_w = 1;
+ param->dst_fourcc = V4L2_PIX_FMT_YUV422M;
+ break;
+ case MTK_JPEG_COLOR_422X2:
+ case MTK_JPEG_COLOR_422:
+ param->dst_fourcc = V4L2_PIX_FMT_YUV422M;
+ break;
+ case MTK_JPEG_COLOR_422V:
+ case MTK_JPEG_COLOR_422VX2:
+ param->uv_brz_w = 1;
+ param->dst_fourcc = V4L2_PIX_FMT_YUV420M;
+ break;
+ case MTK_JPEG_COLOR_420:
+ param->dst_fourcc = V4L2_PIX_FMT_YUV420M;
+ break;
+ case MTK_JPEG_COLOR_400:
+ param->dst_fourcc = V4L2_PIX_FMT_GREY;
+ break;
+ default:
+ param->dst_fourcc = 0;
+ return -1;
+ }
+
+ return 0;
+}
+
+static void mtk_jpeg_calc_mcu(struct mtk_jpeg_dec_param *param)
+{
+ u32 factor_w, factor_h;
+ u32 i, comp, blk;
+
+ factor_w = 2 + param->sampling_w[0];
+ factor_h = 2 + param->sampling_h[0];
+ param->mcu_w = (param->pic_w + (1 << factor_w) - 1) >> factor_w;
+ param->mcu_h = (param->pic_h + (1 << factor_h) - 1) >> factor_h;
+ param->total_mcu = param->mcu_w * param->mcu_h;
+ param->unit_num = ((param->pic_w + 7) >> 3) * ((param->pic_h + 7) >> 3);
+ param->blk_num = 0;
+ for (i = 0; i < MTK_JPEG_COMP_MAX; i++) {
+ param->blk_comp[i] = 0;
+ if (i >= param->comp_num)
+ continue;
+ param->blk_comp[i] = param->sampling_w[i] *
+ param->sampling_h[i];
+ param->blk_num += param->blk_comp[i];
+ }
+
+ param->membership = 0;
+ for (i = 0, blk = 0, comp = 0; i < MTK_JPEG_BLOCK_MAX; i++) {
+ if (i < param->blk_num && comp < param->comp_num) {
+ u32 tmp;
+
+ tmp = (0x04 + (comp & 0x3));
+ param->membership |= tmp << (i * 3);
+ if (++blk == param->blk_comp[comp]) {
+ comp++;
+ blk = 0;
+ }
+ } else {
+ param->membership |= 7 << (i * 3);
+ }
+ }
+}
+
+static void mtk_jpeg_calc_dma_group(struct mtk_jpeg_dec_param *param)
+{
+ u32 factor_mcu = 3;
+
+ if (param->src_color == MTK_JPEG_COLOR_444 &&
+ param->dst_fourcc == V4L2_PIX_FMT_YUV422M)
+ factor_mcu = 4;
+ else if (param->src_color == MTK_JPEG_COLOR_422V &&
+ param->dst_fourcc == V4L2_PIX_FMT_YUV420M)
+ factor_mcu = 4;
+ else if (param->src_color == MTK_JPEG_COLOR_422X2 &&
+ param->dst_fourcc == V4L2_PIX_FMT_YUV422M)
+ factor_mcu = 2;
+ else if (param->src_color == MTK_JPEG_COLOR_400 ||
+ (param->src_color & 0x0FFFF) == 0)
+ factor_mcu = 4;
+
+ param->dma_mcu = 1 << factor_mcu;
+ param->dma_group = param->mcu_w / param->dma_mcu;
+ param->dma_last_mcu = param->mcu_w % param->dma_mcu;
+ if (param->dma_last_mcu)
+ param->dma_group++;
+ else
+ param->dma_last_mcu = param->dma_mcu;
+}
+
+static int mtk_jpeg_calc_dst_size(struct mtk_jpeg_dec_param *param)
+{
+ u32 i, padding_w;
+ u32 ds_row_h[3];
+ u32 brz_w[3];
+
+ brz_w[0] = 0;
+ brz_w[1] = param->uv_brz_w;
+ brz_w[2] = brz_w[1];
+
+ for (i = 0; i < param->comp_num; i++) {
+ if (brz_w[i] > 3)
+ return -1;
+
+ padding_w = param->mcu_w * MTK_JPEG_DCTSIZE *
+ param->sampling_w[i];
+ /* output format is 420/422 */
+ param->comp_w[i] = padding_w >> brz_w[i];
+ param->comp_w[i] = mtk_jpeg_align(param->comp_w[i],
+ MTK_JPEG_DCTSIZE);
+ param->img_stride[i] = i ? mtk_jpeg_align(param->comp_w[i], 16)
+ : mtk_jpeg_align(param->comp_w[i], 32);
+ ds_row_h[i] = (MTK_JPEG_DCTSIZE * param->sampling_h[i]);
+ }
+ param->dec_w = param->img_stride[0];
+ param->dec_h = ds_row_h[0] * param->mcu_h;
+
+ for (i = 0; i < MTK_JPEG_COMP_MAX; i++) {
+ /* They must be equal in frame mode. */
+ param->mem_stride[i] = param->img_stride[i];
+ param->comp_size[i] = param->mem_stride[i] * ds_row_h[i] *
+ param->mcu_h;
+ }
+
+ param->y_size = param->comp_size[0];
+ param->uv_size = param->comp_size[1];
+ param->dec_size = param->y_size + (param->uv_size << 1);
+
+ return 0;
+}
+
+int mtk_jpeg_dec_fill_param(struct mtk_jpeg_dec_param *param)
+{
+ if (mtk_jpeg_decide_format(param))
+ return -1;
+
+ mtk_jpeg_calc_mcu(param);
+ mtk_jpeg_calc_dma_group(param);
+ if (mtk_jpeg_calc_dst_size(param))
+ return -2;
+
+ return 0;
+}
+
+u32 mtk_jpeg_dec_get_int_status(void __iomem *base)
+{
+ u32 ret;
+
+ ret = readl(base + JPGDEC_REG_INTERRUPT_STATUS) & BIT_INQST_MASK_ALLIRQ;
+ if (ret)
+ writel(ret, base + JPGDEC_REG_INTERRUPT_STATUS);
+
+ return ret;
+}
+
+u32 mtk_jpeg_dec_enum_result(u32 irq_result)
+{
+ if (irq_result & BIT_INQST_MASK_EOF)
+ return MTK_JPEG_DEC_RESULT_EOF_DONE;
+ if (irq_result & BIT_INQST_MASK_PAUSE)
+ return MTK_JPEG_DEC_RESULT_PAUSE;
+ if (irq_result & BIT_INQST_MASK_UNDERFLOW)
+ return MTK_JPEG_DEC_RESULT_UNDERFLOW;
+ if (irq_result & BIT_INQST_MASK_OVERFLOW)
+ return MTK_JPEG_DEC_RESULT_OVERFLOW;
+ if (irq_result & BIT_INQST_MASK_ERROR_BS)
+ return MTK_JPEG_DEC_RESULT_ERROR_BS;
+
+ return MTK_JPEG_DEC_RESULT_ERROR_UNKNOWN;
+}
+
+void mtk_jpeg_dec_start(void __iomem *base)
+{
+ writel(0, base + JPGDEC_REG_TRIG);
+}
+
+static void mtk_jpeg_dec_soft_reset(void __iomem *base)
+{
+ writel(0x0000FFFF, base + JPGDEC_REG_INTERRUPT_STATUS);
+ writel(0x00, base + JPGDEC_REG_RESET);
+ writel(0x01, base + JPGDEC_REG_RESET);
+}
+
+static void mtk_jpeg_dec_hard_reset(void __iomem *base)
+{
+ writel(0x00, base + JPGDEC_REG_RESET);
+ writel(0x10, base + JPGDEC_REG_RESET);
+}
+
+void mtk_jpeg_dec_reset(void __iomem *base)
+{
+ mtk_jpeg_dec_soft_reset(base);
+ mtk_jpeg_dec_hard_reset(base);
+}
+
+static void mtk_jpeg_dec_set_brz_factor(void __iomem *base, u8 yscale_w,
+ u8 yscale_h, u8 uvscale_w, u8 uvscale_h)
+{
+ u32 val;
+
+ val = (uvscale_h << 12) | (uvscale_w << 8) |
+ (yscale_h << 4) | yscale_w;
+ writel(val, base + JPGDEC_REG_BRZ_FACTOR);
+}
+
+static void mtk_jpeg_dec_set_dst_bank0(void __iomem *base, u32 addr_y,
+ u32 addr_u, u32 addr_v)
+{
+ mtk_jpeg_verify_align(addr_y, 16, JPGDEC_REG_DEST_ADDR0_Y);
+ writel(addr_y, base + JPGDEC_REG_DEST_ADDR0_Y);
+ mtk_jpeg_verify_align(addr_u, 16, JPGDEC_REG_DEST_ADDR0_U);
+ writel(addr_u, base + JPGDEC_REG_DEST_ADDR0_U);
+ mtk_jpeg_verify_align(addr_v, 16, JPGDEC_REG_DEST_ADDR0_V);
+ writel(addr_v, base + JPGDEC_REG_DEST_ADDR0_V);
+}
+
+static void mtk_jpeg_dec_set_dst_bank1(void __iomem *base, u32 addr_y,
+ u32 addr_u, u32 addr_v)
+{
+ writel(addr_y, base + JPGDEC_REG_DEST_ADDR1_Y);
+ writel(addr_u, base + JPGDEC_REG_DEST_ADDR1_U);
+ writel(addr_v, base + JPGDEC_REG_DEST_ADDR1_V);
+}
+
+static void mtk_jpeg_dec_set_mem_stride(void __iomem *base, u32 stride_y,
+ u32 stride_uv)
+{
+ writel((stride_y & 0xFFFF), base + JPGDEC_REG_STRIDE_Y);
+ writel((stride_uv & 0xFFFF), base + JPGDEC_REG_STRIDE_UV);
+}
+
+static void mtk_jpeg_dec_set_img_stride(void __iomem *base, u32 stride_y,
+ u32 stride_uv)
+{
+ writel((stride_y & 0xFFFF), base + JPGDEC_REG_IMG_STRIDE_Y);
+ writel((stride_uv & 0xFFFF), base + JPGDEC_REG_IMG_STRIDE_UV);
+}
+
+static void mtk_jpeg_dec_set_pause_mcu_idx(void __iomem *base, u32 idx)
+{
+ writel(idx & 0x0003FFFFFF, base + JPGDEC_REG_PAUSE_MCU_NUM);
+}
+
+static void mtk_jpeg_dec_set_dec_mode(void __iomem *base, u32 mode)
+{
+ writel(mode & 0x03, base + JPGDEC_REG_OPERATION_MODE);
+}
+
+static void mtk_jpeg_dec_set_bs_write_ptr(void __iomem *base, u32 ptr)
+{
+ mtk_jpeg_verify_align(ptr, 16, JPGDEC_REG_FILE_BRP);
+ writel(ptr, base + JPGDEC_REG_FILE_BRP);
+}
+
+static void mtk_jpeg_dec_set_bs_info(void __iomem *base, u32 addr, u32 size)
+{
+ mtk_jpeg_verify_align(addr, 16, JPGDEC_REG_FILE_ADDR);
+ mtk_jpeg_verify_align(size, 128, JPGDEC_REG_FILE_TOTAL_SIZE);
+ writel(addr, base + JPGDEC_REG_FILE_ADDR);
+ writel(size, base + JPGDEC_REG_FILE_TOTAL_SIZE);
+}
+
+static void mtk_jpeg_dec_set_comp_id(void __iomem *base, u32 id_y, u32 id_u,
+ u32 id_v)
+{
+ u32 val;
+
+ val = ((id_y & 0x00FF) << 24) | ((id_u & 0x00FF) << 16) |
+ ((id_v & 0x00FF) << 8);
+ writel(val, base + JPGDEC_REG_COMP_ID);
+}
+
+static void mtk_jpeg_dec_set_total_mcu(void __iomem *base, u32 num)
+{
+ writel(num - 1, base + JPGDEC_REG_TOTAL_MCU_NUM);
+}
+
+static void mtk_jpeg_dec_set_comp0_du(void __iomem *base, u32 num)
+{
+ writel(num - 1, base + JPGDEC_REG_COMP0_DATA_UNIT_NUM);
+}
+
+static void mtk_jpeg_dec_set_du_membership(void __iomem *base, u32 member,
+ u32 gmc, u32 isgray)
+{
+ if (isgray)
+ member = 0x3FFFFFFC;
+ member |= (isgray << 31) | (gmc << 30);
+ writel(member, base + JPGDEC_REG_DU_CTRL);
+}
+
+static void mtk_jpeg_dec_set_q_table(void __iomem *base, u32 id0, u32 id1,
+ u32 id2)
+{
+ u32 val;
+
+ val = ((id0 & 0x0f) << 8) | ((id1 & 0x0f) << 4) | ((id2 & 0x0f) << 0);
+ writel(val, base + JPGDEC_REG_QT_ID);
+}
+
+static void mtk_jpeg_dec_set_dma_group(void __iomem *base, u32 mcu_group,
+ u32 group_num, u32 last_mcu)
+{
+ u32 val;
+
+ val = (((mcu_group - 1) & 0x00FF) << 16) |
+ (((group_num - 1) & 0x007F) << 8) |
+ ((last_mcu - 1) & 0x00FF);
+ writel(val, base + JPGDEC_REG_WDMA_CTRL);
+}
+
+static void mtk_jpeg_dec_set_sampling_factor(void __iomem *base, u32 comp_num,
+ u32 y_w, u32 y_h, u32 u_w,
+ u32 u_h, u32 v_w, u32 v_h)
+{
+ u32 val;
+ u32 y_wh = (MTK_JPEG_DUNUM_MASK(y_w) << 2) | MTK_JPEG_DUNUM_MASK(y_h);
+ u32 u_wh = (MTK_JPEG_DUNUM_MASK(u_w) << 2) | MTK_JPEG_DUNUM_MASK(u_h);
+ u32 v_wh = (MTK_JPEG_DUNUM_MASK(v_w) << 2) | MTK_JPEG_DUNUM_MASK(v_h);
+
+ if (comp_num == 1)
+ val = 0;
+ else
+ val = (y_wh << 8) | (u_wh << 4) | v_wh;
+ writel(val, base + JPGDEC_REG_DU_NUM);
+}
+
+void mtk_jpeg_dec_set_config(void __iomem *base,
+ struct mtk_jpeg_dec_param *config,
+ struct mtk_jpeg_bs *bs,
+ struct mtk_jpeg_fb *fb)
+{
+ mtk_jpeg_dec_set_brz_factor(base, 0, 0, config->uv_brz_w, 0);
+ mtk_jpeg_dec_set_dec_mode(base, 0);
+ mtk_jpeg_dec_set_comp0_du(base, config->unit_num);
+ mtk_jpeg_dec_set_total_mcu(base, config->total_mcu);
+ mtk_jpeg_dec_set_bs_info(base, bs->str_addr, bs->size);
+ mtk_jpeg_dec_set_bs_write_ptr(base, bs->end_addr);
+ mtk_jpeg_dec_set_du_membership(base, config->membership, 1,
+ (config->comp_num == 1) ? 1 : 0);
+ mtk_jpeg_dec_set_comp_id(base, config->comp_id[0], config->comp_id[1],
+ config->comp_id[2]);
+ mtk_jpeg_dec_set_q_table(base, config->qtbl_num[0],
+ config->qtbl_num[1], config->qtbl_num[2]);
+ mtk_jpeg_dec_set_sampling_factor(base, config->comp_num,
+ config->sampling_w[0],
+ config->sampling_h[0],
+ config->sampling_w[1],
+ config->sampling_h[1],
+ config->sampling_w[2],
+ config->sampling_h[2]);
+ mtk_jpeg_dec_set_mem_stride(base, config->mem_stride[0],
+ config->mem_stride[1]);
+ mtk_jpeg_dec_set_img_stride(base, config->img_stride[0],
+ config->img_stride[1]);
+ mtk_jpeg_dec_set_dst_bank0(base, fb->plane_addr[0],
+ fb->plane_addr[1], fb->plane_addr[2]);
+ mtk_jpeg_dec_set_dst_bank1(base, 0, 0, 0);
+ mtk_jpeg_dec_set_dma_group(base, config->dma_mcu, config->dma_group,
+ config->dma_last_mcu);
+ mtk_jpeg_dec_set_pause_mcu_idx(base, config->total_mcu);
+}
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h
new file mode 100644
index 0000000..37152a6
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MTK_JPEG_HW_H
+#define _MTK_JPEG_HW_H
+
+#include <media/videobuf2-core.h>
+
+#include "mtk_jpeg_core.h"
+#include "mtk_jpeg_reg.h"
+
+enum {
+ MTK_JPEG_DEC_RESULT_EOF_DONE = 0,
+ MTK_JPEG_DEC_RESULT_PAUSE = 1,
+ MTK_JPEG_DEC_RESULT_UNDERFLOW = 2,
+ MTK_JPEG_DEC_RESULT_OVERFLOW = 3,
+ MTK_JPEG_DEC_RESULT_ERROR_BS = 4,
+ MTK_JPEG_DEC_RESULT_ERROR_UNKNOWN = 6
+};
+
+struct mtk_jpeg_dec_param {
+ u32 pic_w;
+ u32 pic_h;
+ u32 dec_w;
+ u32 dec_h;
+ u32 src_color;
+ u32 dst_fourcc;
+ u32 mcu_w;
+ u32 mcu_h;
+ u32 total_mcu;
+ u32 unit_num;
+ u32 comp_num;
+ u32 comp_id[MTK_JPEG_COMP_MAX];
+ u32 sampling_w[MTK_JPEG_COMP_MAX];
+ u32 sampling_h[MTK_JPEG_COMP_MAX];
+ u32 qtbl_num[MTK_JPEG_COMP_MAX];
+ u32 blk_num;
+ u32 blk_comp[MTK_JPEG_COMP_MAX];
+ u32 membership;
+ u32 dma_mcu;
+ u32 dma_group;
+ u32 dma_last_mcu;
+ u32 img_stride[MTK_JPEG_COMP_MAX];
+ u32 mem_stride[MTK_JPEG_COMP_MAX];
+ u32 comp_w[MTK_JPEG_COMP_MAX];
+ u32 comp_size[MTK_JPEG_COMP_MAX];
+ u32 y_size;
+ u32 uv_size;
+ u32 dec_size;
+ u8 uv_brz_w;
+};
+
+static inline u32 mtk_jpeg_align(u32 val, u32 align)
+{
+ return (val + align - 1) & ~(align - 1);
+}
+
+struct mtk_jpeg_bs {
+ dma_addr_t str_addr;
+ dma_addr_t end_addr;
+ size_t size;
+};
+
+struct mtk_jpeg_fb {
+ dma_addr_t plane_addr[MTK_JPEG_COMP_MAX];
+ size_t size;
+};
+
+int mtk_jpeg_dec_fill_param(struct mtk_jpeg_dec_param *param);
+u32 mtk_jpeg_dec_get_int_status(void __iomem *dec_reg_base);
+u32 mtk_jpeg_dec_enum_result(u32 irq_result);
+void mtk_jpeg_dec_set_config(void __iomem *base,
+ struct mtk_jpeg_dec_param *config,
+ struct mtk_jpeg_bs *bs,
+ struct mtk_jpeg_fb *fb);
+void mtk_jpeg_dec_reset(void __iomem *dec_reg_base);
+void mtk_jpeg_dec_start(void __iomem *dec_reg_base);
+
+#endif /* _MTK_JPEG_HW_H */
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c
new file mode 100644
index 0000000..3886854
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/videodev2.h>
+
+#include "mtk_jpeg_parse.h"
+
+#define TEM 0x01
+#define SOF0 0xc0
+#define RST 0xd0
+#define SOI 0xd8
+#define EOI 0xd9
+
+struct mtk_jpeg_stream {
+ u8 *addr;
+ u32 size;
+ u32 curr;
+};
+
+static int read_byte(struct mtk_jpeg_stream *stream)
+{
+ if (stream->curr >= stream->size)
+ return -1;
+ return stream->addr[stream->curr++];
+}
+
+static int read_word_be(struct mtk_jpeg_stream *stream, u32 *word)
+{
+ u32 temp;
+ int byte;
+
+ byte = read_byte(stream);
+ if (byte == -1)
+ return -1;
+ temp = byte << 8;
+ byte = read_byte(stream);
+ if (byte == -1)
+ return -1;
+ *word = (u32)byte | temp;
+
+ return 0;
+}
+
+static void read_skip(struct mtk_jpeg_stream *stream, long len)
+{
+ if (len <= 0)
+ return;
+ while (len--)
+ read_byte(stream);
+}
+
+static bool mtk_jpeg_do_parse(struct mtk_jpeg_dec_param *param, u8 *src_addr_va,
+ u32 src_size)
+{
+ bool notfound = true;
+ struct mtk_jpeg_stream stream;
+
+ stream.addr = src_addr_va;
+ stream.size = src_size;
+ stream.curr = 0;
+
+ while (notfound) {
+ int i, length, byte;
+ u32 word;
+
+ byte = read_byte(&stream);
+ if (byte == -1)
+ return false;
+ if (byte != 0xff)
+ continue;
+ do
+ byte = read_byte(&stream);
+ while (byte == 0xff);
+ if (byte == -1)
+ return false;
+ if (byte == 0)
+ continue;
+
+ length = 0;
+ switch (byte) {
+ case SOF0:
+ /* length */
+ if (read_word_be(&stream, &word))
+ break;
+
+ /* precision */
+ if (read_byte(&stream) == -1)
+ break;
+
+ if (read_word_be(&stream, &word))
+ break;
+ param->pic_h = word;
+
+ if (read_word_be(&stream, &word))
+ break;
+ param->pic_w = word;
+
+ param->comp_num = read_byte(&stream);
+ if (param->comp_num != 1 && param->comp_num != 3)
+ break;
+
+ for (i = 0; i < param->comp_num; i++) {
+ param->comp_id[i] = read_byte(&stream);
+ if (param->comp_id[i] == -1)
+ break;
+
+ /* sampling */
+ byte = read_byte(&stream);
+ if (byte == -1)
+ break;
+ param->sampling_w[i] = (byte >> 4) & 0x0F;
+ param->sampling_h[i] = byte & 0x0F;
+
+ param->qtbl_num[i] = read_byte(&stream);
+ if (param->qtbl_num[i] == -1)
+ break;
+ }
+
+ notfound = !(i == param->comp_num);
+ break;
+ case RST ... RST + 7:
+ case SOI:
+ case EOI:
+ case TEM:
+ break;
+ default:
+ if (read_word_be(&stream, &word))
+ break;
+ length = (long)word - 2;
+ read_skip(&stream, length);
+ break;
+ }
+ }
+
+ return !notfound;
+}
+
+bool mtk_jpeg_parse(struct mtk_jpeg_dec_param *param, u8 *src_addr_va,
+ u32 src_size)
+{
+ if (!mtk_jpeg_do_parse(param, src_addr_va, src_size))
+ return false;
+ if (mtk_jpeg_dec_fill_param(param))
+ return false;
+
+ return true;
+}
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h
new file mode 100644
index 0000000..5d92340
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MTK_JPEG_PARSE_H
+#define _MTK_JPEG_PARSE_H
+
+#include "mtk_jpeg_hw.h"
+
+bool mtk_jpeg_parse(struct mtk_jpeg_dec_param *param, u8 *src_addr_va,
+ u32 src_size);
+
+#endif /* _MTK_JPEG_PARSE_H */
+
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h
new file mode 100644
index 0000000..fc490d6
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MTK_JPEG_REG_H
+#define _MTK_JPEG_REG_H
+
+#define MTK_JPEG_COMP_MAX 3
+#define MTK_JPEG_BLOCK_MAX 10
+#define MTK_JPEG_DCTSIZE 8
+
+#define BIT_INQST_MASK_ERROR_BS 0x20
+#define BIT_INQST_MASK_PAUSE 0x10
+#define BIT_INQST_MASK_OVERFLOW 0x04
+#define BIT_INQST_MASK_UNDERFLOW 0x02
+#define BIT_INQST_MASK_EOF 0x01
+#define BIT_INQST_MASK_ALLIRQ 0x37
+
+#define JPGDEC_REG_RESET 0x0090
+#define JPGDEC_REG_BRZ_FACTOR 0x00F8
+#define JPGDEC_REG_DU_NUM 0x00FC
+#define JPGDEC_REG_DEST_ADDR0_Y 0x0140
+#define JPGDEC_REG_DEST_ADDR0_U 0x0144
+#define JPGDEC_REG_DEST_ADDR0_V 0x0148
+#define JPGDEC_REG_DEST_ADDR1_Y 0x014C
+#define JPGDEC_REG_DEST_ADDR1_U 0x0150
+#define JPGDEC_REG_DEST_ADDR1_V 0x0154
+#define JPGDEC_REG_STRIDE_Y 0x0158
+#define JPGDEC_REG_STRIDE_UV 0x015C
+#define JPGDEC_REG_IMG_STRIDE_Y 0x0160
+#define JPGDEC_REG_IMG_STRIDE_UV 0x0164
+#define JPGDEC_REG_WDMA_CTRL 0x016C
+#define JPGDEC_REG_PAUSE_MCU_NUM 0x0170
+#define JPGDEC_REG_OPERATION_MODE 0x017C
+#define JPGDEC_REG_FILE_ADDR 0x0200
+#define JPGDEC_REG_COMP_ID 0x020C
+#define JPGDEC_REG_TOTAL_MCU_NUM 0x0210
+#define JPGDEC_REG_COMP0_DATA_UNIT_NUM 0x0224
+#define JPGDEC_REG_DU_CTRL 0x023C
+#define JPGDEC_REG_TRIG 0x0240
+#define JPGDEC_REG_FILE_BRP 0x0248
+#define JPGDEC_REG_FILE_TOTAL_SIZE 0x024C
+#define JPGDEC_REG_QT_ID 0x0270
+#define JPGDEC_REG_INTERRUPT_STATUS 0x0274
+#define JPGDEC_REG_STATUS 0x0278
+
+#endif /* _MTK_JPEG_REG_H */
--
1.9.1
^ permalink raw reply related
* [PATCH v8 1/4] dt-bindings: mediatek: Add a binding for Mediatek JPEG Decoder
From: Rick Chang @ 2016-11-30 3:08 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring
Cc: linux-kernel, linux-media, srv_heupstream, linux-mediatek,
linux-arm-kernel, devicetree, Minghsiu Tsai, Rick Chang, Bin Liu
In-Reply-To: <1480475340-21893-1-git-send-email-rick.chang@mediatek.com>
Add a DT binding documentation for Mediatek JPEG Decoder of
MT2701 SoC.
Signed-off-by: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../bindings/media/mediatek-jpeg-decoder.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
new file mode 100644
index 0000000..3813947
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
@@ -0,0 +1,37 @@
+* Mediatek JPEG Decoder
+
+Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
+
+Required properties:
+- compatible : must be one of the following string:
+ "mediatek,mt8173-jpgdec"
+ "mediatek,mt2701-jpgdec"
+- reg : physical base address of the jpeg decoder registers and length of
+ memory mapped region.
+- interrupts : interrupt number to the interrupt controller.
+- clocks: device clocks, see
+ Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "jpgdec-smi" and "jpgdec".
+- power-domains: a phandle to the power domain, see
+ Documentation/devicetree/bindings/power/power_domain.txt for details.
+- mediatek,larb: must contain the local arbiters in the current Socs, see
+ Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+ for details.
+- iommus: should point to the respective IOMMU block with master port as
+ argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+ for details.
+
+Example:
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
--
1.9.1
^ permalink raw reply related
* [PATCH v8 0/4] Add Mediatek JPEG Decoder
From: Rick Chang @ 2016-11-30 3:08 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring
Cc: linux-kernel, linux-media, srv_heupstream, linux-mediatek,
linux-arm-kernel, devicetree, Minghsiu Tsai, Rick Chang, Bin Liu
This series of patches provide a v4l2 driver to control Mediatek JPEG decoder
for decoding JPEG image and Motion JPEG bitstream.
changes since v7:
- Update MAINTAINERS
changes since v6:
- fix kbuild test fail
- Add patch for MAINTAINERS
changes since v5:
- remove redundant name from struct mtk_jpeg_fmt
- Set state of all buffers to VB2_BUF_STATE_QUEUED if fail in start streaming
- Remove VB2_USERPTR
- Add check for buffer index
changes since v4:
- Change file name of binding documentation
- Revise DT binding documentation
- Revise compatible string
changes since v3:
- Revise DT binding documentation
- Revise compatible string
changes since v2:
- Revise DT binding documentation
changes since v1:
- Rebase for v4.9-rc1.
- Update Compliance test version and result
- Remove redundant path in Makefile
- Fix potential build error without CONFIG_PM_RUNTIME and CONFIG_PM_SLEEP
- Fix warnings from patch check and smatch check
* Dependency
The patch "arm: dts: mt2701: Add node for JPEG decoder" depends on:
CCF "Add clock support for Mediatek MT2701"[1]
iommu and smi "Add the dtsi node of iommu and smi for mt2701"[2]
[1] http://lists.infradead.org/pipermail/linux-mediatek/2016-October/007271.html
[2] https://patchwork.kernel.org/patch/9164013/
* Compliance test
v4l2-compliance SHA : 4ad7174b908a36c4f315e3fe2efa7e2f8a6f375a
Driver Info:
Driver name : mtk-jpeg decode
Card type : mtk-jpeg decoder
Bus info : platform:15004000.jpegdec
Driver version: 4.9.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Compliance test for device /dev/video3 (not using libv4l2):
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second video open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
Test input 0:
Total: 43, Succeeded: 43, Failed: 0, Warnings: 0
Rick Chang (4):
dt-bindings: mediatek: Add a binding for Mediatek JPEG Decoder
vcodec: mediatek: Add Mediatek JPEG Decoder Driver
arm: dts: mt2701: Add node for Mediatek JPEG Decoder
vcodec: mediatek: Add Maintainers entry for Mediatek JPEG driver
.../bindings/media/mediatek-jpeg-decoder.txt | 37 +
MAINTAINERS | 7 +
arch/arm/boot/dts/mt2701.dtsi | 14 +
drivers/media/platform/Kconfig | 15 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/mtk-jpeg/Makefile | 2 +
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 1302 ++++++++++++++++++++
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h | 139 +++
drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c | 417 +++++++
drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h | 91 ++
drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c | 160 +++
drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h | 25 +
drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h | 58 +
13 files changed, 2269 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
create mode 100644 drivers/media/platform/mtk-jpeg/Makefile
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h
--
1.9.1
^ permalink raw reply
* [RESEND PATCH] pinctrl: mt8173: set GPIO16 to usb iddig mode
From: Chunfeng Yun @ 2016-11-30 2:21 UTC (permalink / raw)
To: Linus Walleij, Matthias Brugger, Alexandre Courbot
Cc: linux-gpio-u79uwXL29TY76Z2rM5mHXA, Biao Huang,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Hongzhou Yang,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Chunfeng Yun,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
the default mode of GPIO16 pin is gpio, when set EINT16 to
IRQ_TYPE_LEVEL_HIGH, no interrupt is triggered, it can be
fixed when set its default mode as usb iddig.
Signed-off-by: Chunfeng Yun <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
drivers/pinctrl/mediatek/pinctrl-mtk-mt8173.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-mt8173.h b/drivers/pinctrl/mediatek/pinctrl-mtk-mt8173.h
index 13e5b68..9b018fd 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-mt8173.h
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-mt8173.h
@@ -201,7 +201,7 @@
MTK_PIN(
PINCTRL_PIN(16, "IDDIG"),
NULL, "mt8173",
- MTK_EINT_FUNCTION(0, 16),
+ MTK_EINT_FUNCTION(1, 16),
MTK_FUNCTION(0, "GPIO16"),
MTK_FUNCTION(1, "IDDIG"),
MTK_FUNCTION(2, "CMFLASH"),
--
1.7.9.5
^ permalink raw reply related
* [PATCH 2/2] firmware: qcom: scm: Fix interrupted SCM calls
From: Andy Gross @ 2016-11-29 7:44 UTC (permalink / raw)
To: linux-kernel
Cc: linux-arm-msm, linux-arm-kernel, linux, jesper.nilsson,
lars.persson, niklas.cassel, will.deacon, heiko, Kevin Hilman,
lorenzo.pieralisi, ck.hu, p.zabel, matthias.bgg,
Srinivas Kandagatla, Bjorn Andersson, linux-mediatek,
linux-rockchip, linux-amlogic, Andy Gross
In-Reply-To: <1480405463-23165-1-git-send-email-andy.gross@linaro.org>
This patch adds a Qualcomm specific quirk to the arm_smccc_smc call.
On Qualcomm ARM64 platforms, the SMC call can return before it has
completed. If this occurs, the call can be restarted, but it requires
using the returned session ID value from the interrupted SMC call.
The quirk stores off the session ID from the interrupted call in the
quirk structure so that it can be used by the caller.
This patch folds in a fix given by Sricharan R:
https://lkml.org/lkml/2016/9/28/272
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---
arch/arm64/kernel/smccc-call.S | 9 ++++++++-
drivers/firmware/qcom_scm-64.c | 11 +++++++++--
include/linux/arm-smccc.h | 11 ++++++++---
3 files changed, 25 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/kernel/smccc-call.S b/arch/arm64/kernel/smccc-call.S
index 7b0b3f6..8191fde 100644
--- a/arch/arm64/kernel/smccc-call.S
+++ b/arch/arm64/kernel/smccc-call.S
@@ -12,6 +12,7 @@
*
*/
#include <linux/linkage.h>
+#include <linux/arm-smccc.h>
#include <asm/asm-offsets.h>
.macro SMCCC instr
@@ -20,7 +21,13 @@
ldr x4, [sp]
stp x0, x1, [x4, #ARM_SMCCC_RES_X0_OFFS]
stp x2, x3, [x4, #ARM_SMCCC_RES_X2_OFFS]
- ret
+ ldr x4, [sp, #8]
+ cbz x4, 1f /* no quirk structure */
+ ldr x9, [x4, #ARM_SMCCC_QUIRK_ID_OFFS]
+ cmp x9, #ARM_SMCCC_QUIRK_QCOM_A6
+ b.ne 1f
+ str x6, [x4, ARM_SMCCC_QUIRK_STATE_OFFS]
+1: ret
.cfi_endproc
.endm
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index d164a9b..6e997a6 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -91,6 +91,7 @@ static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
dma_addr_t args_phys = 0;
void *args_virt = NULL;
size_t alloc_len;
+ struct arm_smccc_quirk quirk = {.id = ARM_SMCCC_QUIRK_QCOM_A6};
if (unlikely(arglen > N_REGISTER_ARGS)) {
alloc_len = N_EXT_QCOM_SCM_ARGS * sizeof(u64);
@@ -131,10 +132,16 @@ static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
qcom_smccc_convention,
ARM_SMCCC_OWNER_SIP, fn_id);
+ quirk.state.a6 = 0;
+
do {
arm_smccc_smc(cmd, desc->arginfo, desc->args[0],
- desc->args[1], desc->args[2], x5, 0, 0,
- res, NULL);
+ desc->args[1], desc->args[2], x5,
+ quirk.state.a6, 0, res, &quirk);
+
+ if (res->a0 == QCOM_SCM_INTERRUPTED)
+ cmd = res->a0;
+
} while (res->a0 == QCOM_SCM_INTERRUPTED);
mutex_unlock(&qcom_scm_lock);
diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h
index 74231b4c..0a239a0 100644
--- a/include/linux/arm-smccc.h
+++ b/include/linux/arm-smccc.h
@@ -14,9 +14,6 @@
#ifndef __LINUX_ARM_SMCCC_H
#define __LINUX_ARM_SMCCC_H
-#include <linux/linkage.h>
-#include <linux/types.h>
-
/*
* This file provides common defines for ARM SMC Calling Convention as
* specified in
@@ -60,6 +57,13 @@
#define ARM_SMCCC_OWNER_TRUSTED_OS 50
#define ARM_SMCCC_OWNER_TRUSTED_OS_END 63
+#define ARM_SMCCC_QUIRK_NONE 0
+#define ARM_SMCCC_QUIRK_QCOM_A6 1 /* Save/restore register a6 */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/types.h>
/**
* struct arm_smccc_res - Result from SMC/HVC call
* @a0-a3 result values from registers 0 to 3
@@ -115,4 +119,5 @@ asmlinkage void arm_smccc_hvc(unsigned long a0, unsigned long a1,
unsigned long a5, unsigned long a6, unsigned long a7,
struct arm_smccc_res *res);
+#endif /*__ASSEMBLY__*/
#endif /*__LINUX_ARM_SMCCC_H*/
--
1.9.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox