From: Takashi Iwai <tiwai@suse.de>
To: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: alsa-devel@alsa-project.org,
"Szabolcs Szőke" <szszoke.code@gmail.com>,
"Mediatek WSD Upstream" <wsd_upstream@mediatek.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, "Takashi Iwai" <tiwai@suse.com>,
stable@vger.kernel.org, linux-kernel@vger.kernel.org,
"Hui Wang" <hui.wang@canonical.com>,
"Alexander Tsoy" <alexander@tsoy.me>,
linux-mediatek@lists.infradead.org,
"Matthias Brugger" <matthias.bgg@gmail.com>,
"Johan Hovold" <johan@kernel.org>,
"Jaroslav Kysela" <perex@perex.cz>,
"Macpaul Lin" <macpaul.lin@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] sound: usb: pcm: fix incorrect power state when playing sound after PM_AUTO suspend
Date: Wed, 03 Jun 2020 14:47:31 +0200 [thread overview]
Message-ID: <s5hr1uwco4c.wl-tiwai@suse.de> (raw)
In-Reply-To: <1591187964.23525.61.camel@mtkswgap22>
On Wed, 03 Jun 2020 14:39:24 +0200,
Macpaul Lin wrote:
>
> On Wed, 2020-06-03 at 10:45 +0200, Takashi Iwai wrote:
> > On Wed, 03 Jun 2020 08:54:51 +0200,
> > Takashi Iwai wrote:
> > >
> > > On Wed, 03 Jun 2020 08:28:09 +0200,
> > > Takashi Iwai wrote:
> > > >
> > > > And, the most suspicious case is the last one,
> > > > chip->num_suspended-intf. It means that the device has multiple
> > > > USB interfaces and they went to suspend, while the resume isn't
> > > > performed for the all suspended interfaces in return.
> > >
> > > If this is the cause, a patch like below might help.
> > > It gets/puts the all assigned interfaced instead of only the primary
> > > one.
> >
> > ... and considering of the problem again, rather the patch below might
> > be the right answer. Now the driver tries to remember at which state
> > it entered into the system-suspend. Upon resume, in return, when the
> > state reaches back to that point, set the card state to D0.
> >
> > The previous patch can be applied on the top, too, and it might be
> > worth to apply both.
> >
> > Let me know if any of those actually helps.
> >
> >
> > Takashi
>
> Thanks for your response so quickly.
> I've just test this patch since it looks like enough for the issue.
Good to hear!
> This patch worked since the flag system_suspend will be set at the same
> time when power state has been changed. I have 2 interface with the head
> set. But actually the problem happened when primary one is suspended.
Currently the autosuspend is set only to the primary interface; IOW,
the other interfaces will never get autosuspend, and the another
suspend-all-intf patch should improve that situation. But it won't
fix your actual bug, obviously :)
> So I didn't test the earlier patch "suspend all interface instead of
> only the primary one."
Could you try it one on top of the last patch? At least I'd like to
see whether it causes any regression.
> Will you resend this patch officially later? I think this solution is
> required to send to stable, too. It's better to have it for other stable
> kernel versions include android's.
Yes, that's a general bug and worth to be merged quickly.
I'm going to submit a proper patch soon later.
thanks,
Takashi
>
> > ---
> > diff --git a/sound/usb/card.c b/sound/usb/card.c
> > --- a/sound/usb/card.c
> > +++ b/sound/usb/card.c
> > @@ -843,9 +843,6 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
> > if (chip == (void *)-1L)
> > return 0;
> >
> > - chip->autosuspended = !!PMSG_IS_AUTO(message);
> > - if (!chip->autosuspended)
> > - snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot);
> > if (!chip->num_suspended_intf++) {
> > list_for_each_entry(as, &chip->pcm_list, list) {
> > snd_usb_pcm_suspend(as);
> > @@ -858,6 +855,11 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
> > snd_usb_mixer_suspend(mixer);
> > }
> >
> > + if (!PMSG_IS_AUTO(message) && !chip->system_suspend) {
> > + snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot);
> > + chip->system_suspend = chip->num_suspended_intf;
> > + }
> > +
> > return 0;
> > }
> >
> > @@ -871,10 +873,10 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume)
> >
> > if (chip == (void *)-1L)
> > return 0;
> > - if (--chip->num_suspended_intf)
> > - return 0;
> >
> > atomic_inc(&chip->active); /* avoid autopm */
> > + if (chip->num_suspended_intf > 1)
> > + goto out;
> >
> > list_for_each_entry(as, &chip->pcm_list, list) {
> > err = snd_usb_pcm_resume(as);
> > @@ -896,9 +898,12 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume)
> > snd_usbmidi_resume(p);
> > }
> >
> > - if (!chip->autosuspended)
> > + out:
> > + if (chip->num_suspended_intf == chip->system_suspend) {
> > snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0);
> > - chip->autosuspended = 0;
> > + chip->system_suspend = 0;
> > + }
> > + chip->num_suspended_intf--;
> >
> > err_out:
> > atomic_dec(&chip->active); /* allow autopm after this point */
> > diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
> > index 1c892c7f14d7..e0ebfb25fbd5 100644
> > --- a/sound/usb/usbaudio.h
> > +++ b/sound/usb/usbaudio.h
> > @@ -26,7 +26,7 @@ struct snd_usb_audio {
> > struct usb_interface *pm_intf;
> > u32 usb_id;
> > struct mutex mutex;
> > - unsigned int autosuspended:1;
> > + unsigned int system_suspend;
> > atomic_t active;
> > atomic_t shutdown;
> > atomic_t usage_count;
> >
> > _______________________________________________
>
> Thank you very much!
>
> Best regards,
> Macpaul Lin
>
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2020-06-03 12:47 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org>
2020-06-02 11:53 ` [PATCH] sound: usb: pcm: fix incorrect power state when playing sound after PM_AUTO suspend Macpaul Lin
2020-06-02 12:19 ` Macpaul Lin
2020-06-02 12:46 ` Takashi Iwai
2020-06-03 3:05 ` Macpaul Lin
2020-06-03 6:28 ` Takashi Iwai
2020-06-03 6:54 ` Takashi Iwai
2020-06-03 8:45 ` Takashi Iwai
2020-06-03 12:39 ` Macpaul Lin
2020-06-03 12:47 ` Takashi Iwai [this message]
2020-06-03 13:50 ` Macpaul Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hr1uwco4c.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alexander@tsoy.me \
--cc=alsa-devel@alsa-project.org \
--cc=gregkh@linuxfoundation.org \
--cc=hui.wang@canonical.com \
--cc=johan@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=macpaul.lin@gmail.com \
--cc=macpaul.lin@mediatek.com \
--cc=matthias.bgg@gmail.com \
--cc=perex@perex.cz \
--cc=stable@vger.kernel.org \
--cc=szszoke.code@gmail.com \
--cc=tiwai@suse.com \
--cc=wsd_upstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox