From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Tue, 03 Jun 2003 06:40:50 +0100 (BST) Received: from rrcs-central-24-123-115-43.biz.rr.com ([IPv6:::ffff:24.123.115.43]:38404 "EHLO Radium.intranet") by linux-mips.org with ESMTP id ; Tue, 3 Jun 2003 06:40:48 +0100 Received: from radium ([192.168.1.22]) by Radium.intranet (8.9.3/8.9.3) with ESMTP id AAA31966; Tue, 3 Jun 2003 00:40:02 -0500 From: "Lyle Bainbridge" To: "'Dan Malek'" , Cc: , Subject: RE: DBAu1500 board flash downloading Date: Tue, 3 Jun 2003 00:40:36 -0500 Message-ID: <000201c32992$a844efc0$1601a8c0@radium> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2616 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 In-Reply-To: <3EDC29CB.1010409@embeddededge.com> Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 2505 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: lyle@zevion.com Precedence: bulk X-list: linux-mips Yeh, I second that. The BDI-2000 has been a very valuable tool for me, both for debugging and flash writing. However, it runs about $2500 for one architecture (ie, MIPS). By the time you purchase the Raven and the various software packages it's almost as expensive, but isn't as good. If money isn't a problem, the BDI-2000 is the way to go. Lyle > > > Jeff Baitis wrote: > > > Rather than building an EJTAG interface, I recommend the > Raven EJTAG > > interface. It plugs into your LPT port, and will plug into > the EJTAG > > interface on your DBAu1500 board. > > I can recommend the Abatron BDI-2000 (www.abatron.ch). It's > a powerful, flexible tool that will work in a variety of > development environments. In addition to providing debugging > features, it also has built-in flash programming algorithms. > You can erase/program flash with simple console or script > commands from various file formats transferred over the > network using tftp. > > > -- Dan > From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Lyle Bainbridge" Subject: RE: DBAu1500 board flash downloading Date: Tue, 3 Jun 2003 00:40:36 -0500 Message-ID: <000201c32992$a844efc0$1601a8c0@radium> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit In-Reply-To: <3EDC29CB.1010409@embeddededge.com> Return-Path: Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org To: 'Dan Malek' , baitisj@evolution.com Cc: n_gale@ok.ru, linux-mips@linux-mips.org Message-ID: <20030603054036.xcb7hatyzB76Xwz8OsOZXQj3F2Mmq5kLJUjhoohxpCw@z> Yeh, I second that. The BDI-2000 has been a very valuable tool for me, both for debugging and flash writing. However, it runs about $2500 for one architecture (ie, MIPS). By the time you purchase the Raven and the various software packages it's almost as expensive, but isn't as good. If money isn't a problem, the BDI-2000 is the way to go. Lyle > > > Jeff Baitis wrote: > > > Rather than building an EJTAG interface, I recommend the > Raven EJTAG > > interface. It plugs into your LPT port, and will plug into > the EJTAG > > interface on your DBAu1500 board. > > I can recommend the Abatron BDI-2000 (www.abatron.ch). It's > a powerful, flexible tool that will work in a variety of > development environments. In addition to providing debugging > features, it also has built-in flash programming algorithms. > You can erase/program flash with simple console or script > commands from various file formats transferred over the > network using tftp. > > > -- Dan >