From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Thu, 29 Mar 2007 19:59:11 +0100 (BST) Received: from 3phoenix.com ([207.234.209.100]:39869 "EHLO dedicated.3phoenix.com") by ftp.linux-mips.org with ESMTP id S20023203AbXC2S7H (ORCPT ); Thu, 29 Mar 2007 19:59:07 +0100 X-ClientAddr: 24.106.202.234 Received: from 3PiGAS (rrcs-24-106-202-234.se.biz.rr.com [24.106.202.234] (may be forged)) (authenticated bits=0) by dedicated.3phoenix.com (8.13.6/8.13.6) with ESMTP id l2TIx7sC006551; Thu, 29 Mar 2007 14:59:08 -0400 From: "Gary Smith" To: Subject: 'mem= ' Kernel Boot Parameter on BCM1250/1480 Platform Date: Thu, 29 Mar 2007 14:56:49 -0400 Organization: 3 Phoenix, Inc. Message-ID: <001301c77234$04d014c0$8eacaac0@3PiGAS> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0014_01C77212.7DBE74C0" X-Mailer: Microsoft Office Outlook 11 Thread-Index: AcdyNAE1qiw3sdP2R5OSpi6yavpHpw== X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3028 X-3PHOENIX-MailScanner-Information: Please contact the ISP for more information X-3PHOENIX-MailScanner: Found to be clean X-3PHOENIX-MailScanner-From: gary.smith@3phoenix.com Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 14769 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: gary.smith@3phoenix.com Precedence: bulk X-list: linux-mips This is a multi-part message in MIME format. ------=_NextPart_000_0014_01C77212.7DBE74C0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Dear Linux-Mips Developers: I'd like to ask a question about use of the 'mem=' kernel parameter. When booting without this parameter, the kernel automatically detects the amount of memory as 989020 kB. If a kernel parameter is added to specify 'mem=989020k' a TLB Miss error is encountered. Do you all have guidance about how the memory parameter can be specified without causing the error? Since the mem= parameter was set to an identical value as the memory reported by meminfo in the /proc filesystem, use of this kernel parameter should be OK. This behavior has been observed on both the BCM1250/1480 platforms when running Debian linux. The 2.6.17-2 kernel is used with the system. Thanks, Gary -- Gary A. Smith, ABD PhD Engineer, 3Phoenix, Inc. 3331 Heritage Trade Drive Suite 101 Wake Forest, NC 27587 919.562.5333 x107 http://www.3Phoenix.com Gary.Smith@3Phoenix.com debian:/proc# more meminfo MemTotal: 989020 kB MemFree: 957876 kB Buffers: 1660 kB Cached: 12076 kB SwapCached: 0 kB Active: 10308 kB Inactive: 5224 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 989020 kB LowFree: 957876 kB SwapTotal: 72252 kB SwapFree: 72252 kB Dirty: 524 kB Writeback: 0 kB Mapped: 4496 kB Slab: 7236 kB CommitLimit: 566760 kB Committed_AS: 4360 kB PageTables: 188 kB VmallocTotal: 1073741824 kB VmallocUsed: 916 kB VmallocChunk: 1073739640 kB CFE version 1.3.3 for SWARM (64bit,MP,BE,MIPS) Build Date: Tue Dec 19 06:41:38 EST 2006 (root@static-host) Copyright (C) 2000,2001,2002,2003,2004,2005 Broadcom Corporation. Initializing Arena. Initializing Devices. SWARM board revision 3 sbeth: found phy 1, vendor 000818 part 0C sbeth: found phy 1, vendor 000818 part 0C Config switch: 0 CPU: BCM1250 B2 L2 Cache Status: OK Wafer ID: 0x7F21A009 [Lot 8136, Wafer 13] Manuf Test: Bin A [2CPU_FI_FD_F2 (OK)] SysCfg: 0000000008C20800 [PLL_DIV: 16, IOB0_DIV: CPUCLK/4, IOB1_DIV: CPUCLK/3] CPU type 0x1040102: 800MHz Total memory: 0x40000000 bytes (1024MB) Total memory used by CFE: 0x8FEB3000 - 0x8FFFF520 (1361184) Initialized Data: 0x8FEF5408 - 0x8FEFD100 (31992) BSS Area: 0x8FEFD100 - 0x8FEFD520 (1056) Local Heap: 0x8FEFD520 - 0x8FFFD520 (1048576) Stack Area: 0x8FFFD520 - 0x8FFFF520 (8192) Text (code) segment: 0x8FEB3000 - 0x8FEF4C75 (269429) Boot area (physical): 0x0FE72000 - 0x0FEB2000 Relocation Factor: I:F02B3000 - D:F02B3000 *** Autoboot: Trying device 'ide0.0' file (ide0.0,raw) Loader:raw Filesys:raw Dev:ide0.0 File: Options:(null) Loading: ........... 130560 bytes read Entry at 0x20000000 Starting program at 0x20000000 SiByte Loader, version 2.4.2 Built on Oct 4 2005 Getting configuration file ext2:ide0.0:*:sibyl.conf... Config file retrieved. Loading kernel (ELF64): 4256456@0x80100000 done Set up command line arguments to: root=/dev/hda3 console=duart0 mem=989020k Setting up initial prom_init arguments **Exception 32: EPC=0000000020000BC8, Cause=00009008 (TLBMissRd) (CPU0) RA=0000000020000BB4, VAddr=0000000000000000, SR=00000082 0 ($00) = 0000000000000000 AT ($01) = 0000000000000001 v0 ($02) = FFFFFFFF8FEFCC70 v1 ($03) = 0000000000000000 a0 ($04) = 0000000000000010 a1 ($05) = 0000000000000000 a2 ($06) = 000000008FEB3CDC a3 ($07) = 0000000000000000 t0 ($08) = 0000000000000080 t1 ($09) = 0000000000000001 t2 ($10) = 0000000000000001 t3 ($11) = 0000000000000000 t4 ($12) = 0000000000000000 t5 ($13) = 0000000000000000 t6 ($14) = 0000000000000015 t7 ($15) = 0000000045000000 s0 ($16) = FFFFFFFF8FEB3AF4 s1 ($17) = FFFFFFFF8FEFD4E0 s2 ($18) = FFFFFFFF8FFFF250 s3 ($19) = FFFFFFFF8FEFD0B8 s4 ($20) = 0000000000000000 s5 ($21) = 0000000000000000 s6 ($22) = 0000000000000000 s7 ($23) = FFFFFFFF8FEB3000 t8 ($24) = 0000000000000000 t9 ($25) = 0000000000000000 k0 ($26) = 0000000000000001 k1 ($27) = 000000008FEB3CDC gp ($28) = 00000000200278F0 sp ($29) = FFFFFFFF8FFFECE0 fp ($30) = FFFFFFFF8FFFECE0 ra ($31) = 0000000020000BB4 ------=_NextPart_000_0014_01C77212.7DBE74C0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Dear = Linux-Mips Developers:

 

I’d like to ask a question about use of the ‘mem=3D’ kernel = parameter.  When booting without this parameter, the kernel automatically detects = the amount of memory as 989020 kB.  If = a kernel parameter is added to specify ‘mem=3D989020k’ a TLB Miss = error is encountered.  Do you all have guidance about how the memory = parameter can be specified without causing the error?  Since the mem=3D parameter = was set to an identical value as the memory reported by meminfo in the /proc filesystem, use of this kernel parameter should be OK.  This = behavior has been observed on both the BCM1250/1480 platforms when running Debian = linux.  The 2.6.17-2 kernel is used with the system.

 

Thanks,

Gary

--

Gary A. = Smith, ABD PhD
Engineer, 3Phoenix, Inc.

3331 = Heritage Trade Drive

Suite = 101

Wake = Forest, NC  27587

919.562.5333 x107

http://www.3Phoenix.com<= /font>

Gary.Smith@3Phoenix.com

 

 

debian:/proc# more = meminfo

MemTotal:       = 989020 kB

MemFree:        957876 kB

Buffers:          1660 kB

Cached:          12076 kB

SwapCached:          0 kB

Active:          10308 kB

Inactive:         5224 kB

HighTotal:         &nb= sp; 0 kB

HighFree:         &nbs= p;  0 kB

LowTotal:       = 989020 kB

LowFree:        957876 kB

SwapTotal:       72252 kB

SwapFree:        72252 kB

Dirty:          &= nbsp;  524 kB

Writeback:         &nb= sp; 0 kB

Mapped:          = 4496 kB

Slab:          &n= bsp;  7236 kB

CommitLimit:    566760 = kB

Committed_AS:     4360 = kB

PageTables:        188 kB

VmallocTotal: 1073741824 = kB

VmallocUsed:       916 kB

VmallocChunk: 1073739640 = kB

 

 

CFE version 1.3.3 for SWARM = (64bit,MP,BE,MIPS) Build Date: Tue Dec 19 06:41:38 EST 2006 (root@static-host) Copyright (C) 2000,2001,2002,2003,2004,2005 Broadcom = Corporation.

 

Initializing = Arena.

Initializing = Devices.

SWARM board revision = 3

sbeth: found phy 1, vendor 000818 part = 0C

sbeth: found phy 1, vendor 000818 part 0C = Config switch: 0

CPU: BCM1250 B2

L2 Cache Status: = OK

Wafer ID:   0x7F21A009  [Lot = 8136, Wafer 13]

Manuf Test: Bin A [2CPU_FI_FD_F2 = (OK)]

SysCfg: 0000000008C20800 [PLL_DIV: 16, = IOB0_DIV: CPUCLK/4, IOB1_DIV:

CPUCLK/3]

CPU type 0x1040102: = 800MHz

Total memory: 0x40000000 bytes = (1024MB)

 

Total memory used by CFE:  0x8FEB3000 - 0x8FFFF520 (1361184)

Initialized Data:          0x8FEF5408 - 0x8FEFD100 (31992)

BSS Area:           &n= bsp;      0x8FEFD100 - 0x8FEFD520 (1056)

Local Heap:           &n= bsp;    0x8FEFD520 - 0x8FFFD520 (1048576)

Stack Area:           &n= bsp;    0x8FFFD520 - 0x8FFFF520 (8192)

Text (code) segment:       0x8FEB3000 - 0x8FEF4C75 = (269429)

Boot area = (physical):      0x0FE72000 - 0x0FEB2000

Relocation Factor:         I:F02B3000 - = D:F02B3000

 

 

*** Autoboot: Trying device 'ide0.0' = file  (ide0.0,raw)

 

Loader:raw Filesys:raw Dev:ide0.0 File: Options:(null)

Loading: ........... 130560 bytes = read

Entry at = 0x20000000

Starting program at = 0x20000000

 

SiByte Loader, version = 2.4.2

Built on Oct  4 = 2005

Getting configuration file ext2:ide0.0:*:sibyl.conf...

Config file = retrieved.

Loading kernel = (ELF64):

    = 4256456@0x80100000

done

Set up command line arguments to: = root=3D/dev/hda3 console=3Dduart0 mem=3D989020k Setting up initial prom_init arguments = **Exception 32: EPC=3D0000000020000BC8, Cause=3D00009008 (TLBMissRd) = (CPU0)

           &= nbsp;    RA=3D0000000020000BB4, VAddr=3D0000000000000000, = SR=3D00000082

 

        = 0  ($00) =3D 0000000000000000     AT ($01) =3D = 0000000000000001

        v0 = ($02) =3D FFFFFFFF8FEFCC70     v1 ($03) =3D = 0000000000000000

        a0 = ($04) =3D 0000000000000010     a1 ($05) =3D = 0000000000000000

        a2 = ($06) =3D 000000008FEB3CDC     a3 ($07) =3D = 0000000000000000

        t0 = ($08) =3D 0000000000000080     t1 ($09) =3D = 0000000000000001

        t2 = ($10) =3D 0000000000000001     t3 ($11) =3D = 0000000000000000

        t4 = ($12) =3D 0000000000000000     t5 ($13) =3D = 0000000000000000

        t6 = ($14) =3D 0000000000000015     t7 ($15) =3D = 0000000045000000

        s0 = ($16) =3D FFFFFFFF8FEB3AF4     s1 ($17) =3D = FFFFFFFF8FEFD4E0

        s2 = ($18) =3D FFFFFFFF8FFFF250     s3 ($19) =3D = FFFFFFFF8FEFD0B8

        s4 = ($20) =3D 0000000000000000     s5 ($21) =3D = 0000000000000000

        s6 = ($22) =3D 0000000000000000     s7 ($23) =3D = FFFFFFFF8FEB3000

        t8 = ($24) =3D 0000000000000000     t9 ($25) =3D = 0000000000000000

        k0 = ($26) =3D 0000000000000001     k1 ($27) =3D = 000000008FEB3CDC

        gp = ($28) =3D 00000000200278F0     sp ($29) =3D = FFFFFFFF8FFFECE0

        fp = ($30) =3D FFFFFFFF8FFFECE0     ra ($31) =3D = 0000000020000BB4

------=_NextPart_000_0014_01C77212.7DBE74C0-- From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from 3phoenix.com ([207.234.209.100]:39869 "EHLO dedicated.3phoenix.com") by ftp.linux-mips.org with ESMTP id S20023203AbXC2S7H (ORCPT ); Thu, 29 Mar 2007 19:59:07 +0100 From: "Gary Smith" Subject: 'mem= ' Kernel Boot Parameter on BCM1250/1480 Platform Date: Thu, 29 Mar 2007 14:56:49 -0400 Message-ID: <001301c77234$04d014c0$8eacaac0@3PiGAS> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0014_01C77212.7DBE74C0" Return-Path: Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org To: linux-mips@linux-mips.org Message-ID: <20070329185649.Ut7lF1jV9fStmeLlV4Bi8-uiveKsMmz70FCMwVxaH8Q@z> This is a multi-part message in MIME format. ------=_NextPart_000_0014_01C77212.7DBE74C0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Dear Linux-Mips Developers: I'd like to ask a question about use of the 'mem=' kernel parameter. When booting without this parameter, the kernel automatically detects the amount of memory as 989020 kB. If a kernel parameter is added to specify 'mem=989020k' a TLB Miss error is encountered. Do you all have guidance about how the memory parameter can be specified without causing the error? Since the mem= parameter was set to an identical value as the memory reported by meminfo in the /proc filesystem, use of this kernel parameter should be OK. This behavior has been observed on both the BCM1250/1480 platforms when running Debian linux. The 2.6.17-2 kernel is used with the system. Thanks, Gary -- Gary A. Smith, ABD PhD Engineer, 3Phoenix, Inc. 3331 Heritage Trade Drive Suite 101 Wake Forest, NC 27587 919.562.5333 x107 http://www.3Phoenix.com Gary.Smith@3Phoenix.com debian:/proc# more meminfo MemTotal: 989020 kB MemFree: 957876 kB Buffers: 1660 kB Cached: 12076 kB SwapCached: 0 kB Active: 10308 kB Inactive: 5224 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 989020 kB LowFree: 957876 kB SwapTotal: 72252 kB SwapFree: 72252 kB Dirty: 524 kB Writeback: 0 kB Mapped: 4496 kB Slab: 7236 kB CommitLimit: 566760 kB Committed_AS: 4360 kB PageTables: 188 kB VmallocTotal: 1073741824 kB VmallocUsed: 916 kB VmallocChunk: 1073739640 kB CFE version 1.3.3 for SWARM (64bit,MP,BE,MIPS) Build Date: Tue Dec 19 06:41:38 EST 2006 (root@static-host) Copyright (C) 2000,2001,2002,2003,2004,2005 Broadcom Corporation. Initializing Arena. Initializing Devices. SWARM board revision 3 sbeth: found phy 1, vendor 000818 part 0C sbeth: found phy 1, vendor 000818 part 0C Config switch: 0 CPU: BCM1250 B2 L2 Cache Status: OK Wafer ID: 0x7F21A009 [Lot 8136, Wafer 13] Manuf Test: Bin A [2CPU_FI_FD_F2 (OK)] SysCfg: 0000000008C20800 [PLL_DIV: 16, IOB0_DIV: CPUCLK/4, IOB1_DIV: CPUCLK/3] CPU type 0x1040102: 800MHz Total memory: 0x40000000 bytes (1024MB) Total memory used by CFE: 0x8FEB3000 - 0x8FFFF520 (1361184) Initialized Data: 0x8FEF5408 - 0x8FEFD100 (31992) BSS Area: 0x8FEFD100 - 0x8FEFD520 (1056) Local Heap: 0x8FEFD520 - 0x8FFFD520 (1048576) Stack Area: 0x8FFFD520 - 0x8FFFF520 (8192) Text (code) segment: 0x8FEB3000 - 0x8FEF4C75 (269429) Boot area (physical): 0x0FE72000 - 0x0FEB2000 Relocation Factor: I:F02B3000 - D:F02B3000 *** Autoboot: Trying device 'ide0.0' file (ide0.0,raw) Loader:raw Filesys:raw Dev:ide0.0 File: Options:(null) Loading: ........... 130560 bytes read Entry at 0x20000000 Starting program at 0x20000000 SiByte Loader, version 2.4.2 Built on Oct 4 2005 Getting configuration file ext2:ide0.0:*:sibyl.conf... Config file retrieved. Loading kernel (ELF64): 4256456@0x80100000 done Set up command line arguments to: root=/dev/hda3 console=duart0 mem=989020k Setting up initial prom_init arguments **Exception 32: EPC=0000000020000BC8, Cause=00009008 (TLBMissRd) (CPU0) RA=0000000020000BB4, VAddr=0000000000000000, SR=00000082 0 ($00) = 0000000000000000 AT ($01) = 0000000000000001 v0 ($02) = FFFFFFFF8FEFCC70 v1 ($03) = 0000000000000000 a0 ($04) = 0000000000000010 a1 ($05) = 0000000000000000 a2 ($06) = 000000008FEB3CDC a3 ($07) = 0000000000000000 t0 ($08) = 0000000000000080 t1 ($09) = 0000000000000001 t2 ($10) = 0000000000000001 t3 ($11) = 0000000000000000 t4 ($12) = 0000000000000000 t5 ($13) = 0000000000000000 t6 ($14) = 0000000000000015 t7 ($15) = 0000000045000000 s0 ($16) = FFFFFFFF8FEB3AF4 s1 ($17) = FFFFFFFF8FEFD4E0 s2 ($18) = FFFFFFFF8FFFF250 s3 ($19) = FFFFFFFF8FEFD0B8 s4 ($20) = 0000000000000000 s5 ($21) = 0000000000000000 s6 ($22) = 0000000000000000 s7 ($23) = FFFFFFFF8FEB3000 t8 ($24) = 0000000000000000 t9 ($25) = 0000000000000000 k0 ($26) = 0000000000000001 k1 ($27) = 000000008FEB3CDC gp ($28) = 00000000200278F0 sp ($29) = FFFFFFFF8FFFECE0 fp ($30) = FFFFFFFF8FFFECE0 ra ($31) = 0000000020000BB4 ------=_NextPart_000_0014_01C77212.7DBE74C0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Dear = Linux-Mips Developers:

 

I’d like to ask a question about use of the ‘mem=3D’ kernel = parameter.  When booting without this parameter, the kernel automatically detects = the amount of memory as 989020 kB.  If = a kernel parameter is added to specify ‘mem=3D989020k’ a TLB Miss = error is encountered.  Do you all have guidance about how the memory = parameter can be specified without causing the error?  Since the mem=3D parameter = was set to an identical value as the memory reported by meminfo in the /proc filesystem, use of this kernel parameter should be OK.  This = behavior has been observed on both the BCM1250/1480 platforms when running Debian = linux.  The 2.6.17-2 kernel is used with the system.

 

Thanks,

Gary

--

Gary A. = Smith, ABD PhD
Engineer, 3Phoenix, Inc.

3331 = Heritage Trade Drive

Suite = 101

Wake = Forest, NC  27587

919.562.5333 x107

http://www.3Phoenix.com<= /font>

Gary.Smith@3Phoenix.com

 

 

debian:/proc# more = meminfo

MemTotal:       = 989020 kB

MemFree:        957876 kB

Buffers:          1660 kB

Cached:          12076 kB

SwapCached:          0 kB

Active:          10308 kB

Inactive:         5224 kB

HighTotal:         &nb= sp; 0 kB

HighFree:         &nbs= p;  0 kB

LowTotal:       = 989020 kB

LowFree:        957876 kB

SwapTotal:       72252 kB

SwapFree:        72252 kB

Dirty:          &= nbsp;  524 kB

Writeback:         &nb= sp; 0 kB

Mapped:          = 4496 kB

Slab:          &n= bsp;  7236 kB

CommitLimit:    566760 = kB

Committed_AS:     4360 = kB

PageTables:        188 kB

VmallocTotal: 1073741824 = kB

VmallocUsed:       916 kB

VmallocChunk: 1073739640 = kB

 

 

CFE version 1.3.3 for SWARM = (64bit,MP,BE,MIPS) Build Date: Tue Dec 19 06:41:38 EST 2006 (root@static-host) Copyright (C) 2000,2001,2002,2003,2004,2005 Broadcom = Corporation.

 

Initializing = Arena.

Initializing = Devices.

SWARM board revision = 3

sbeth: found phy 1, vendor 000818 part = 0C

sbeth: found phy 1, vendor 000818 part 0C = Config switch: 0

CPU: BCM1250 B2

L2 Cache Status: = OK

Wafer ID:   0x7F21A009  [Lot = 8136, Wafer 13]

Manuf Test: Bin A [2CPU_FI_FD_F2 = (OK)]

SysCfg: 0000000008C20800 [PLL_DIV: 16, = IOB0_DIV: CPUCLK/4, IOB1_DIV:

CPUCLK/3]

CPU type 0x1040102: = 800MHz

Total memory: 0x40000000 bytes = (1024MB)

 

Total memory used by CFE:  0x8FEB3000 - 0x8FFFF520 (1361184)

Initialized Data:          0x8FEF5408 - 0x8FEFD100 (31992)

BSS Area:           &n= bsp;      0x8FEFD100 - 0x8FEFD520 (1056)

Local Heap:           &n= bsp;    0x8FEFD520 - 0x8FFFD520 (1048576)

Stack Area:           &n= bsp;    0x8FFFD520 - 0x8FFFF520 (8192)

Text (code) segment:       0x8FEB3000 - 0x8FEF4C75 = (269429)

Boot area = (physical):      0x0FE72000 - 0x0FEB2000

Relocation Factor:         I:F02B3000 - = D:F02B3000

 

 

*** Autoboot: Trying device 'ide0.0' = file  (ide0.0,raw)

 

Loader:raw Filesys:raw Dev:ide0.0 File: Options:(null)

Loading: ........... 130560 bytes = read

Entry at = 0x20000000

Starting program at = 0x20000000

 

SiByte Loader, version = 2.4.2

Built on Oct  4 = 2005

Getting configuration file ext2:ide0.0:*:sibyl.conf...

Config file = retrieved.

Loading kernel = (ELF64):

    = 4256456@0x80100000

done

Set up command line arguments to: = root=3D/dev/hda3 console=3Dduart0 mem=3D989020k Setting up initial prom_init arguments = **Exception 32: EPC=3D0000000020000BC8, Cause=3D00009008 (TLBMissRd) = (CPU0)

           &= nbsp;    RA=3D0000000020000BB4, VAddr=3D0000000000000000, = SR=3D00000082

 

        = 0  ($00) =3D 0000000000000000     AT ($01) =3D = 0000000000000001

        v0 = ($02) =3D FFFFFFFF8FEFCC70     v1 ($03) =3D = 0000000000000000

        a0 = ($04) =3D 0000000000000010     a1 ($05) =3D = 0000000000000000

        a2 = ($06) =3D 000000008FEB3CDC     a3 ($07) =3D = 0000000000000000

        t0 = ($08) =3D 0000000000000080     t1 ($09) =3D = 0000000000000001

        t2 = ($10) =3D 0000000000000001     t3 ($11) =3D = 0000000000000000

        t4 = ($12) =3D 0000000000000000     t5 ($13) =3D = 0000000000000000

        t6 = ($14) =3D 0000000000000015     t7 ($15) =3D = 0000000045000000

        s0 = ($16) =3D FFFFFFFF8FEB3AF4     s1 ($17) =3D = FFFFFFFF8FEFD4E0

        s2 = ($18) =3D FFFFFFFF8FFFF250     s3 ($19) =3D = FFFFFFFF8FEFD0B8

        s4 = ($20) =3D 0000000000000000     s5 ($21) =3D = 0000000000000000

        s6 = ($22) =3D 0000000000000000     s7 ($23) =3D = FFFFFFFF8FEB3000

        t8 = ($24) =3D 0000000000000000     t9 ($25) =3D = 0000000000000000

        k0 = ($26) =3D 0000000000000001     k1 ($27) =3D = 000000008FEB3CDC

        gp = ($28) =3D 00000000200278F0     sp ($29) =3D = FFFFFFFF8FFFECE0

        fp = ($30) =3D FFFFFFFF8FFFECE0     ra ($31) =3D = 0000000020000BB4

------=_NextPart_000_0014_01C77212.7DBE74C0--