From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Fri, 28 May 2004 21:11:12 +0100 (BST) Received: from mx2.mips.com ([IPv6:::ffff:206.31.31.227]:34037 "EHLO mx2.mips.com") by linux-mips.org with ESMTP id ; Fri, 28 May 2004 21:10:59 +0100 Received: from mercury.mips.com (ns-dmz [206.31.31.225]) by mx2.mips.com (8.12.11/8.12.11) with ESMTP id i4SJurlE028757; Fri, 28 May 2004 12:56:53 -0700 (PDT) Received: from grendel (grendel [192.168.236.16]) by mercury.mips.com (8.12.11/8.12.11) with SMTP id i4SK8iZR002985; Fri, 28 May 2004 13:08:45 -0700 (PDT) Message-ID: <01ea01c444f0$03d6b8e0$10eca8c0@grendel> From: "Kevin D. Kissell" To: , Cc: References: <1085773008.1029.59.camel@jzny.localdomain> Subject: Re: weird sb1250 behavior Date: Fri, 28 May 2004 22:11:49 +0200 Organization: MIPS Technologies Inc. MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1409 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1409 X-Scanned-By: MIMEDefang 2.39 Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 5217 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: kevink@mips.com Precedence: bulk X-list: linux-mips This could be any one of a number of wierd effects that one sees from time to time. Rather than speculate, would it be too much to ask you to run objdump --disassemble on the different versions of your test program and post the results? ----- Original Message ----- From: "jamal" To: Cc: Sent: Friday, May 28, 2004 21:36 Subject: weird sb1250 behavior > > found some very strange behavior with sb1250. > Gcc 3.2.3 with sibyte mods. Running Linux 2.4.21 with whatever > mods off sibyte. > > Testcase: > sending a large amount of traffic > -->eth0-->someprocessing-->eth1 > > given the nature of processing, say i was getting 100Kpps throughput. > Now i fire a very basic program that has just loops and forever > sums up two numbers. > > --- > 1 #include > 2 > 3 int main () > 4 { > 5 int a = 1; > 6 int b = 2; > 7 int c = 0; > 8 // int c; > 9 while (1) { > 10 c = a + b; > 11 } > 12 } > -------- > > I see very little drop in throughput - probably around 0.01%. > > Now comment line 7 then uncomment line 8. Hallelujah. > Perfomance drops to about 100pps. Thats about a factor of 1000 down! > > Interesting thing is if you add a nop (__asm__ __volatile__("nop");) > in the second version just before the while loop, we get back the same > performance as in the earlier version. > Apologies in advance for attaching objdumps (since there maybe folks who > dont have access to the sibyte tools) > 1) while-init-dis is for case 1 where c is initialized > 2) while-noinit-dis is for case 2 where c is not initialize > 3) while-nop-dis is for case 3 when you have nop thrown in. > > > cheers, > jamal > > From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <01ea01c444f0$03d6b8e0$10eca8c0@grendel> From: "Kevin D. Kissell" References: <1085773008.1029.59.camel@jzny.localdomain> Subject: Re: weird sb1250 behavior Date: Fri, 28 May 2004 22:11:49 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-Path: Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org To: hadi@cyberus.ca, linux-mips@linux-mips.org Cc: sibyte-users@bitmover.com Message-ID: <20040528201149.pwDXiZ-jEB45L7ZGwIpN6kWgWkGhsyqa4L_1-JOD7_Y@z> This could be any one of a number of wierd effects that one sees from time to time. Rather than speculate, would it be too much to ask you to run objdump --disassemble on the different versions of your test program and post the results? ----- Original Message ----- From: "jamal" To: Cc: Sent: Friday, May 28, 2004 21:36 Subject: weird sb1250 behavior > > found some very strange behavior with sb1250. > Gcc 3.2.3 with sibyte mods. Running Linux 2.4.21 with whatever > mods off sibyte. > > Testcase: > sending a large amount of traffic > -->eth0-->someprocessing-->eth1 > > given the nature of processing, say i was getting 100Kpps throughput. > Now i fire a very basic program that has just loops and forever > sums up two numbers. > > --- > 1 #include > 2 > 3 int main () > 4 { > 5 int a = 1; > 6 int b = 2; > 7 int c = 0; > 8 // int c; > 9 while (1) { > 10 c = a + b; > 11 } > 12 } > -------- > > I see very little drop in throughput - probably around 0.01%. > > Now comment line 7 then uncomment line 8. Hallelujah. > Perfomance drops to about 100pps. Thats about a factor of 1000 down! > > Interesting thing is if you add a nop (__asm__ __volatile__("nop");) > in the second version just before the while loop, we get back the same > performance as in the earlier version. > Apologies in advance for attaching objdumps (since there maybe folks who > dont have access to the sibyte tools) > 1) while-init-dis is for case 1 where c is initialized > 2) while-noinit-dis is for case 2 where c is not initialize > 3) while-nop-dis is for case 3 when you have nop thrown in. > > > cheers, > jamal > >