linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Alexander Dahl <post@lespocky.de>, Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, Alexander Dahl <ada@thorsis.com>,
	linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	linux-amlogic@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-leds@vger.kernel.org
Subject: Re: [Linux-stm32] [PATCH v8 3/5] ARM: dts: stm32: Fix schema warnings for pwm-leds
Date: Sat, 28 Nov 2020 23:00:06 +0100	[thread overview]
Message-ID: <044d49be-2016-818e-b1b0-ee50c3b744e7@pengutronix.de> (raw)
In-Reply-To: <20201128215353.3991-4-post@lespocky.de>

On 28.11.20 22:53, Alexander Dahl wrote:
> The node names for devices using the pwm-leds driver follow a certain
> naming scheme (now).  Parent node name is not enforced, but recommended
> by DT project.
> 
>   DTC     arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml
>   CHECK   arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml
> /home/alex/build/linux/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml: led-rgb: 'led-blue', 'led-green', 'led-red' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
>         From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
> 
> Signed-off-by: Alexander Dahl <post@lespocky.de>
> ---
> 
> Notes:
>     v7 -> v8:
>       * rebased on v5.10-rc1
>       * updated indexes and added comment (Ahmad Fatoum)

Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

Thanks,

>     
>     v6 -> v7:
>       * split up patch (one per sub arch)
>       * added actual warnings to commit message
> 
>  arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
> index 1e5333fd437f..5ed58110d963 100644
> --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
> @@ -36,34 +36,35 @@
>  		stdout-path = &uart4;
>  	};
>  
> -	led-act {
> +	led-controller-0 {
>  		compatible = "gpio-leds";
>  
> -		led-green {
> +		led-0 {
>  			label = "mc1:green:act";
>  			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
>  			linux,default-trigger = "heartbeat";
>  		};
>  	};
>  
> -	led-rgb {
> +	led-controller-1 {
>  		compatible = "pwm-leds";
>  
> -		led-red {
> +		/* led-1 to led-3 are part of a single RGB led */
> +		led-1 {
>  			label = "mc1:red:rgb";
>  			pwms = <&leds_pwm 1 1000000 0>;
>  			max-brightness = <255>;
>  			active-low;
>  		};
>  
> -		led-green {
> +		led-2 {
>  			label = "mc1:green:rgb";
>  			pwms = <&leds_pwm 2 1000000 0>;
>  			max-brightness = <255>;
>  			active-low;
>  		};
>  
> -		led-blue {
> +		led-3 {
>  			label = "mc1:blue:rgb";
>  			pwms = <&leds_pwm 3 1000000 0>;
>  			max-brightness = <255>;
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

  reply	other threads:[~2020-11-28 22:01 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-28 21:53 [PATCH v8 0/5] leds: pwm: Make automatic labels work Alexander Dahl
2020-11-28 21:53 ` [PATCH v8 1/5] dt-bindings: mfd: Fix schema warnings for pwm-leds Alexander Dahl
2020-11-28 21:53 ` [PATCH v8 2/5] ARM: dts: berlin: " Alexander Dahl
2020-11-28 21:53 ` [PATCH v8 3/5] ARM: dts: stm32: " Alexander Dahl
2020-11-28 22:00   ` Ahmad Fatoum [this message]
2020-11-28 21:53 ` [PATCH v8 4/5] arm64: dts: meson: " Alexander Dahl
2020-11-28 21:53 ` [PATCH v8 5/5] MIPS: DTS: img: " Alexander Dahl
2020-12-07 10:32   ` Thomas Bogendoerfer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=044d49be-2016-818e-b1b0-ee50c3b744e7@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=ada@thorsis.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=post@lespocky.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).