From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Sun, 22 Feb 2004 19:14:49 +0000 (GMT) Received: from mx2.redhat.com ([IPv6:::ffff:66.187.237.31]:39430 "EHLO mx2.redhat.com") by linux-mips.org with ESMTP id ; Sun, 22 Feb 2004 19:14:34 +0000 Received: from int-mx2.corp.redhat.com (int-mx2.corp.redhat.com [172.16.27.26]) by mx2.redhat.com (8.11.6/8.11.6) with ESMTP id i1MImgi01698; Sun, 22 Feb 2004 13:48:42 -0500 Received: from potter.sfbay.redhat.com (potter.sfbay.redhat.com [172.16.27.15]) by int-mx2.corp.redhat.com (8.11.6/8.11.6) with ESMTP id i1MJDUM10909; Sun, 22 Feb 2004 14:13:30 -0500 Received: from [192.168.123.101] (vpn26-9.sfbay.redhat.com [172.16.26.9]) by potter.sfbay.redhat.com (8.11.6/8.11.6) with ESMTP id i1MJDTX10744; Sun, 22 Feb 2004 11:13:29 -0800 Subject: Re: r3000 instruction set From: Eric Christopher To: Mark and Janice Juszczec Cc: linux-mips@linux-mips.org In-Reply-To: References: Content-Type: text/plain Message-Id: <1077477186.3636.34.camel@dzur.sfbay.redhat.com> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.5 (1.4.5-7) Date: Sun, 22 Feb 2004 11:13:06 -0800 Content-Transfer-Encoding: 7bit Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 4400 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: echristo@redhat.com Precedence: bulk X-list: linux-mips > So, can someone recommend a definitive list of r3000 assembler instructions? Other than the responses you've already gotten, likely you'll need to compile with -march=r3900(or -mcpu=r3900 if it's an old toolchain) since the 3900 is missing a couple of r3000 instructions iirc. If it's the 3912 I remember it also doesn't have an fpu, but I could be wrong there. If it is, then you need -msoft-float as well. -eric -- Eric Christopher