From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Mon, 31 Jan 2005 22:06:23 +0000 (GMT) Received: from p3EE06889.dip.t-dialin.net ([IPv6:::ffff:62.224.104.137]:52688 "EHLO p3EE06889.dip.t-dialin.net") by linux-mips.org with ESMTP id ; Mon, 31 Jan 2005 22:06:08 +0000 Received: from 80-219-199-111.dclient.hispeed.ch ([IPv6:::ffff:80.219.199.111]:17831 "EHLO xbox.hb9jnx.ampr.org") by linux-mips.net with ESMTP id ; Mon, 31 Jan 2005 23:06:08 +0100 Received: from 10.1.0.6 ([10.1.0.6]) (authenticated bits=0) by xbox.hb9jnx.ampr.org (8.13.1/8.13.1) with ESMTP id j0VM5kUB024228 (version=TLSv1/SSLv3 cipher=RC4-MD5 bits=128 verify=NO); Mon, 31 Jan 2005 23:05:47 +0100 Subject: Re: initial bootstrap and jtag From: Thomas Sailer To: Clem Taylor Cc: linux-mips@linux-mips.org In-Reply-To: References: Content-Type: text/plain Organization: Supercomputing Systems AG Date: Mon, 31 Jan 2005 23:05:36 +0100 Message-Id: <1107209136.5393.26.camel@gamecube.scs.ch> Mime-Version: 1.0 X-Mailer: Evolution 2.0.2 (2.0.2-3) Content-Transfer-Encoding: 7bit Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 7094 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: sailer@scs.ch Precedence: bulk X-list: linux-mips On Mon, 2005-01-31 at 15:07 -0500, Clem Taylor wrote: > We are finishing up the design of our new Au1550 based board. I was > wondering if someone could recommend an ejtag wiggler. I need I hacked a simple program that loads u-boot into SDRAM via EJTAG. The processor is directly connected to the host parallel port. Booting the processor takes somewhat less than a minute on my Pb1000 board. Not particularily fast, but acceptable for my purpose. http://www.baycom.org/~tom/ejtag/ Tom