Re: stale board ports, again

[Pete Popov <ppopov@embeddedalley.com>]

On Tue, 2005-09-20 at 16:07 -0400, Michael Kelly wrote:
> CSB250 is obsoleted by us and we have not sold one in over a year.

Finally, I get to nuke something :)

Thanks,

Pete

> We have replaced it with the CSB655 Au1550, so keep that one if you
> see it!
> 
> Michael
> 
> At 03:52 PM 9/20/2005, Bruno Randolf wrote:
> >hi pete!
> >
> >just starting to use the mtx-1 boards with 2.6: i just submitted a flash map
> >for it to the mtd project, in order to be merged back to linux-mips later.
> >works well.
> >
> >currently 2.4 is still the default for mtx-1 based products, but we will be
> >switching to 2.6 soon... 4g systems will maintain it, or at least send
> >patches to you.
> >
> >bruno
> >
> >On Tuesday 20 September 2005 21:45, Pete Popov wrote:
> > > Is there anyone using the mtx-1, csb250, or xxs1500 in 2.6? If so, how
> > > badly broken are they and does anyone want to maintain them or is it
> > > time to nuke them?
> > >
> > > Thanks,
> > >
> > > Pete
> >
> 
> Michael J. Kelly
> VP Engineering
> Cogent Computer Systems, Inc.
> ***NEW ADDRESS AND PHONE/FAX***
> 10 Industrial Dr., Unit B
> Smithfield, RI 02917
> tel:401-223-3441 fax:401-223-3442
> www.cogcomp.com
> alternate email: mkelly6505@hotmail.com
>