From: Matej Kupljen <matej.kupljen@ultra.si>
To: Jay Monkman <jtm@smoothsmoothie.com>
Cc: linux-mips@linux-mips.org
Subject: Re: USB on AU1550
Date: Thu, 29 Sep 2005 11:07:11 +0200 [thread overview]
Message-ID: <1127984831.10179.6.camel@localhost.localdomain> (raw)
In-Reply-To: <433B0299.8080507@smoothsmoothie.com>
Hi
> I'm trying to get USB working on my AU1550 board, and I'm getting an error I
> don't understand. I've searched the web and the mailing list archives, but
> haven't found anything relevant.
Not the answer to you question, but I have some problems with USB on
AU1200 board too. I use AirStar2 USB card (this is DVB-T card) and it
is recognized by AU1200 and can communicate with it. I can tune to
transporder, but the data (transport stream) is not send from the
USB card.
The card conforms to USB 1.1.
I tried it on a PC running Linux and it works fine.
AU1200 kernel: 2.6.11, PC kernel: 2.6.13.2.
Any thoughts?
BR,
Matej
P.S.: This is the log:
----------------------------------------------------------------------------------
flexcop_usb: running at FULL speed.
DVB: registering new adapter (FlexCop Digital TV device).
f010
b2c2-flexcop: MAC address = <DELETED>
b2c2-flexcop: found the mt352 at i2c address: 0x0f
DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'USB'
bus controlled by a 'FlexCopIII' complete
creating 4 iso-urbs with 4 frames each of 1023 bytes size = 16368.
initializing and submitting urb no. 0 (buf_offset: 0).
urb no: 0, frame: 0, frame_offset: 0
urb no: 0, frame: 1, frame_offset: 1023
urb no: 0, frame: 2, frame_offset: 2046
urb no: 0, frame: 3, frame_offset: 3069
submitted urb no. 0.
initializing and submitting urb no. 1 (buf_offset: 4092).
urb no: 1, frame: 0, frame_offset: 0
urb no: 1, frame: 1, frame_offset: 1023
urb no: 1, frame: 2, frame_offset: 2046
urb no: 1, frame: 3, frame_offset: 3069
submitted urb no. 1.
initializing and submitting urb no. 2 (buf_offset: 8184).
urb no: 2, frame: 0, frame_offset: 0
urb no: 2, frame: 1, frame_offset: 1023
urb no: 2, frame: 2, frame_offset: 2046
urb no: 2, frame: 3, frame_offset: 3069
submitted urb no. 2.
initializing and submitting urb no. 3 (buf_offset: 12276).
urb no: 3, frame: 0, frame_offset: 0
urb no: 3, frame: 1, frame_offset: 1023
urb no: 3, frame: 2, frame_offset: 2046
urb no: 3, frame: 3, frame_offset: 3069
submitted urb no. 3.
flexcop_usb: Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver
successfully initialized and connected.
usbcore: registered new driver b2c2_flexcop_usb
----------------------------------------------------------------------------------
next prev parent reply other threads:[~2005-09-29 9:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-28 20:52 USB on AU1550 Jay Monkman
2005-09-29 9:07 ` Matej Kupljen [this message]
2005-12-24 11:52 ` Herbert Valerio Riedel
2006-02-10 8:36 ` Sylvain Munaut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1127984831.10179.6.camel@localhost.localdomain \
--to=matej.kupljen@ultra.si \
--cc=jtm@smoothsmoothie.com \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox