Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Sergey Podstavin <spodstavin@ru.mvista.com>
To: linux-mips <linux-mips@linux-mips.org>
Subject: NEC VR5701 support
Date: Thu, 23 Feb 2006 18:39:48 +0300	[thread overview]
Message-ID: <1140709188.5741.8.camel@localhost.localdomain> (raw)

[-- Attachment #1: Type: text/plain, Size: 1 bytes --]



[-- Attachment #2: pro_mips_nec_vr5701_ide_udma_fix.patch --]
[-- Type: text/x-patch, Size: 4097 bytes --]

Source: MontaVista Software, Inc.
MR: 15910
Type: Defect Fix
Disposition: needs submitting to linuxmips-embedded mailing list
Signed-off-by: Aleskey Makarov <makarov@ru.mvista.com>
Description:
	This patch adds the code that changes 
	dma mode of the IPCI IDE controller.

Index: linux-2.6.10/drivers/ide/pci/nec_vr5701_sg2.c
===================================================================
--- linux-2.6.10.orig/drivers/ide/pci/nec_vr5701_sg2.c
+++ linux-2.6.10/drivers/ide/pci/nec_vr5701_sg2.c
@@ -34,6 +34,105 @@ static unsigned int __init init_chipset_
 	return 0;
 }
 
+static u8 nec_vr5701_ratemask(ide_drive_t * drive)
+{
+	u8 mode = 2;
+	if (!eighty_ninty_three(drive))
+		mode = min(mode, (u8)1);
+	return mode;
+}
+
+static void udma_set(ide_drive_t * drive, u16 udma_mode)
+{
+
+	ide_hwif_t * hwif = HWIF(drive);
+	struct pci_dev * dev = hwif->pci_dev;
+
+	u8 reg4b; /* udma control register */
+	u16 reg4c; /* udma timing register */
+
+	pci_read_config_word(dev, 0x4c, &reg4c);
+	reg4c &= ~(7 << (drive->dn * 4));
+	reg4c |= udma_mode << (drive->dn * 4);
+	pci_write_config_word(dev, 0x4c, reg4c);
+
+	pci_read_config_byte(dev, 0x4b, &reg4b);
+	reg4b |= 1 << drive->dn;
+	pci_write_config_byte(dev, 0x4b, reg4b);
+}
+
+static void udma_clean(ide_drive_t * drive)
+{
+
+	ide_hwif_t * hwif = HWIF(drive);
+	struct pci_dev * dev = hwif->pci_dev;
+
+	u8 reg4b; /* udma control register */
+
+	pci_read_config_byte(dev, 0x4b, &reg4b);
+	reg4b &= ~(1 << drive->dn);
+	pci_write_config_byte(dev, 0x4b, reg4b);
+}
+
+static void dma_set(ide_drive_t * drive, u32 dma_mode)
+{
+
+	ide_hwif_t * hwif = HWIF(drive);
+	struct pci_dev * dev = hwif->pci_dev;
+
+	u32 reg44; /* dma timing register */
+
+	udma_clean(drive);
+
+	pci_read_config_dword(dev, 0x44, &reg44);
+	reg44 &= ~(3 << (8 * drive->dn));
+	reg44 |= dma_mode << (8 * drive->dn);
+	pci_write_config_dword(dev, 0x44, reg44);
+}
+
+static int nec_vr5701_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+{
+	u8 speed = ide_rate_filter(nec_vr5701_ratemask(drive), xferspeed);
+
+	switch(speed) {
+		case XFER_UDMA_4:
+			udma_set(drive, 4);
+			break;
+		case XFER_UDMA_3:
+			udma_set(drive, 3);
+			break;
+		case XFER_UDMA_2:
+			udma_set(drive, 2);
+			break;
+		case XFER_UDMA_1:
+			udma_set(drive, 1);
+			break;
+		case XFER_UDMA_0:
+			udma_set(drive, 0);
+			break;
+		case XFER_MW_DMA_2:
+			dma_set(drive, 2);
+			break;
+		case XFER_MW_DMA_1:
+			dma_set(drive, 1);
+			break;
+		case XFER_MW_DMA_0:
+			dma_set(drive, 0);
+			break;
+		case XFER_PIO_4:
+		case XFER_PIO_3:
+		case XFER_PIO_2:
+		case XFER_PIO_1:
+		case XFER_PIO_0:
+			udma_clean(drive);
+			break;
+		default:
+			return -1;
+	}
+
+	return (ide_config_drive_speed(drive, speed));
+}
+
 static void __init init_hwif_nec_vr5701(ide_hwif_t * hwif)
 {
 	if (!(hwif->dma_base))
@@ -44,6 +143,8 @@ static void __init init_hwif_nec_vr5701(
 	hwif->mwdma_mask = 0x07;
 	hwif->swdma_mask = 0x07;
 
+	hwif->speedproc = &nec_vr5701_tune_chipset;
+
 	{
 		struct pci_dev * pci_dev = hwif->pci_dev;
 		hwif->io_ports[IDE_CONTROL_OFFSET]
Index: linux-2.6.10/include/linux/lsppatchlevel.h
===================================================================
--- linux-2.6.10.orig/include/linux/lsppatchlevel.h
+++ linux-2.6.10/include/linux/lsppatchlevel.h
@@ -6,4 +6,4 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#define LSP_PATCH_LEVEL "7"
+#define LSP_PATCH_LEVEL "8"
Index: linux-2.6.10/mvl_patches/pro-0008.c
===================================================================
--- /dev/null
+++ linux-2.6.10/mvl_patches/pro-0008.c
@@ -0,0 +1,16 @@
+/*
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/init.h>
+#include <linux/mvl_patch.h>
+
+static __init int regpatch(void)
+{
+        return mvl_register_patch(8);
+}
+module_init(regpatch);

             reply	other threads:[~2006-02-23 15:34 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-02-23 15:39 Sergey Podstavin [this message]
  -- strict thread matches above, loose matches on Subject: below --
2006-02-23 15:45 NEC VR5701 support Sergey Podstavin
2006-02-23 15:44 Sergey Podstavin
2006-02-23 15:43 Sergey Podstavin
2006-02-23 15:43 Sergey Podstavin
2006-02-23 15:41 Sergey Podstavin
2006-02-23 15:39 Sergey Podstavin
2006-02-23 15:38 Sergey Podstavin
2006-02-23 15:36 Sergey Podstavin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1140709188.5741.8.camel@localhost.localdomain \
    --to=spodstavin@ru.mvista.com \
    --cc=linux-mips@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox