From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Wed, 26 Jul 2006 01:20:47 +0100 (BST) Received: from smtp107.biz.mail.mud.yahoo.com ([68.142.200.255]:38768 "HELO smtp107.biz.mail.mud.yahoo.com") by ftp.linux-mips.org with SMTP id S8133987AbWGZAUe (ORCPT ); Wed, 26 Jul 2006 01:20:34 +0100 Received: (qmail 13761 invoked from network); 26 Jul 2006 00:20:23 -0000 Received: from unknown (HELO ?192.168.1.107?) (ppopov@embeddedalley.com@71.128.175.242 with plain) by smtp107.biz.mail.mud.yahoo.com with SMTP; 26 Jul 2006 00:20:22 -0000 Subject: Re: YAMON: go From: Pete Popov Reply-To: ppopov@embeddedalley.com To: ashlesha@kenati.com Cc: linux-mips@linux-mips.org In-Reply-To: <1153872862.6478.7.camel@sandbar.kenati.com> References: <1153872862.6478.7.camel@sandbar.kenati.com> Content-Type: text/plain Organization: Embedded Alley Solutions, Inc Date: Tue, 25 Jul 2006 17:20:06 -0700 Message-Id: <1153873206.1824.59.camel@localhost.localdomain> Mime-Version: 1.0 X-Mailer: Evolution 2.4.1 Content-Transfer-Encoding: 7bit Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 12071 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: ppopov@embeddedalley.com Precedence: bulk X-list: linux-mips On Tue, 2006-07-25 at 17:14 -0700, Ashlesha Shintre wrote: > Hi, > > I compiled an 2.6 kernel for the db1500 board and used the load command > in YAMON to write the srec image to the RAM using tftp. Now I want to > start the kernel and so I issued the go command. It gives me the > following error: > > * Exception (user) : Reserved instruction * > > CAUSE = 0x00808028 STATUS = 0x00000002 > EPC = 0x80404004 ERROREPC = 0x00000000 > BADVADDR = 0x00000000 > Also another query is this: How does one know whether the load command > has written to the RAM or the Flash? The help load says that this > depends on the address. However, upon issuing the load command without > any options, YAMON outputs the following as the location of the load: > > Start = 0x80404000, range = (0x80100000,0x80423084), format = SREC ... which is a ram address. SRECs have the load address embedded in them and the kernel is linked to run from ram. Are you sure the jumpers on the board are setup to match the kernel endianness you have compiled? Looks like your kernel crashed pretty quickly. Pete