Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Franck Bui-Huu <vagabon.xyz@gmail.com>
To: ralf@linux-mips.org
Cc: anemo@mba.ocn.ne.jp, ths@networkno.de, linux-mips@linux-mips.org,
	Franck Bui-Huu <fbuihuu@gmail.com>
Subject: [PATCH 2/7] Make __pa() aware of XKPHYS/CKSEG0 address mix for 64 bit kernels
Date: Fri, 13 Oct 2006 14:39:01 +0200	[thread overview]
Message-ID: <1160743146824-git-send-email-fbuihuu@gmail.com> (raw)
In-Reply-To: <11607431461469-git-send-email-fbuihuu@gmail.com>

During early boot mem init, some configs couldn't use __pa() to
convert virtual into physical addresses. Specially for 64 bit
kernel cases when CONFIG_BUILD_ELF64=n. This patch make __pa()
work for _all_ configs and thus make CPHYSADDR() useless.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
---
 include/asm-mips/page.h |    9 +++++++--
 1 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h
index 0821eb0..5da4733 100644
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -131,8 +131,13 @@ #endif /* !__ASSEMBLY__ */
 /* to align the pointer to the (next) page boundary */
 #define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
 
-#define __pa(x)			((unsigned long) (x) - PAGE_OFFSET)
-#define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
+#if defined(CONFIG_64BITS) && !defined(CONFIG_BUILD_ELF64)
+#define __page_offset(x)	((unsigned long)(x) < CKSEG0 ? PAGE_OFFSET : CKSEG0)
+#else
+#define __page_offset(x)	PAGE_OFFSET
+#endif
+#define __pa(x)			((unsigned long)(x) - __page_offset(x))
+#define __va(x)			((void *)((unsigned long)(x) + __page_offset(x)))
 
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 
-- 
1.4.2.3

  parent reply	other threads:[~2006-10-13 12:39 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-10-13 12:38 [PATCH 0/7] Get ride of CPHYSADDR() in setup.c [take #2] Franck Bui-Huu
2006-10-13 12:39 ` [PATCH 1/7] page.h: remove __pa() usages Franck Bui-Huu
2006-10-13 16:27   ` Atsushi Nemoto
2006-10-14  9:22     ` Franck Bui-Huu
2006-10-13 12:39 ` Franck Bui-Huu [this message]
2006-10-13 16:27   ` [PATCH 2/7] Make __pa() aware of XKPHYS/CKSEG0 address mix for 64 bit kernels Atsushi Nemoto
2006-10-14  8:39     ` Franck Bui-Huu
2006-10-19  4:01   ` Atsushi Nemoto
2006-10-19  6:20     ` Franck Bui-Huu
2006-10-19  6:41     ` Yoichi Yuasa
2006-10-19  7:01       ` Atsushi Nemoto
2006-10-19  7:23         ` Yoichi Yuasa
2006-10-19  7:43         ` Franck Bui-Huu
2006-10-19  7:59           ` Atsushi Nemoto
2006-10-13 12:39 ` [PATCH 3/7] setup.c: get ride of CPHYSADDR() Franck Bui-Huu
2006-10-13 12:39 ` [PATCH 4/7] Introduce __pa_symbol() Franck Bui-Huu
2006-10-13 12:39 ` [PATCH 5/7] setup.c: use __pa_symbol() where needed Franck Bui-Huu
2006-10-13 12:39 ` [PATCH 6/7] setup.c: clean up initrd related code Franck Bui-Huu
2006-10-16  8:03   ` Franck Bui-Huu
2006-10-16  8:10     ` Atsushi Nemoto
2006-10-16  8:48       ` Franck Bui-Huu
2006-10-16  9:07         ` Atsushi Nemoto
2006-10-16  9:54           ` Thiemo Seufer
2006-10-16 10:19             ` Atsushi Nemoto
2006-10-16 14:42           ` Franck Bui-Huu
2006-10-16 14:51             ` Franck Bui-Huu
2006-10-16  9:09     ` Thiemo Seufer
2006-10-16 14:23       ` Franck Bui-Huu
2006-10-16 14:49         ` Franck Bui-Huu
2006-10-19  4:13   ` Atsushi Nemoto
2006-10-19  6:37     ` Franck Bui-Huu
2006-10-19  6:51       ` Atsushi Nemoto
2006-10-19  7:29         ` Franck Bui-Huu
2006-10-19  7:51           ` Atsushi Nemoto
2006-10-19  8:30             ` Franck Bui-Huu
2006-10-19  8:39     ` Franck Bui-Huu
2006-10-19  9:15       ` Atsushi Nemoto
2006-10-19  9:54         ` Franck Bui-Huu
2006-10-19 10:30           ` Atsushi Nemoto
2006-10-19 10:51             ` Franck Bui-Huu
2006-10-19 11:00               ` Atsushi Nemoto
2006-10-19 11:12                 ` Franck Bui-Huu
2006-10-13 12:39 ` [PATCH 7/7] Make free_init_pages() arguments to be physical addresses Franck Bui-Huu
2006-10-13 13:31   ` Franck Bui-Huu
  -- strict thread matches above, loose matches on Subject: below --
2006-10-16 16:12 [PATCH 0/7] Get ride of CPHYSADDR() in setup.c [take #3] Franck Bui-Huu
2006-10-16 16:12 ` [PATCH 2/7] Make __pa() aware of XKPHYS/CKSEG0 address mix for 64 bit kernels Franck Bui-Huu
2006-10-19 11:19 [PATCH 0/7] Get ride of CPHYSADDR() in setup.c [take #4] Franck Bui-Huu
2006-10-19 11:20 ` [PATCH 2/7] Make __pa() aware of XKPHYS/CKSEG0 address mix for 64 bit kernels Franck Bui-Huu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1160743146824-git-send-email-fbuihuu@gmail.com \
    --to=vagabon.xyz@gmail.com \
    --cc=anemo@mba.ocn.ne.jp \
    --cc=fbuihuu@gmail.com \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    --cc=ths@networkno.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox