From: Franck Bui-Huu <vagabon.xyz@gmail.com>
To: ralf@linux-mips.org
Cc: anemo@mba.ocn.ne.jp, ths@networkno.de, linux-mips@linux-mips.org,
Franck Bui-Huu <fbuihuu@gmail.com>
Subject: [PATCH 6/7] setup.c: clean up initrd related code
Date: Thu, 19 Oct 2006 13:20:04 +0200 [thread overview]
Message-ID: <11612568061590-git-send-email-fbuihuu@gmail.com> (raw)
In-Reply-To: <11612568052624-git-send-email-fbuihuu@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
---
arch/mips/kernel/setup.c | 75 +++++++++++++++++++++++++++++-----------------
arch/mips/mm/init.c | 5 ---
2 files changed, 48 insertions(+), 32 deletions(-)
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index b52cc97..89440a0 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -145,13 +145,12 @@ static int __init rd_start_early(char *p
unsigned long start = memparse(p, &p);
#ifdef CONFIG_64BIT
- /* HACK: Guess if the sign extension was forgotten */
- if (start > 0x0000000080000000 && start < 0x00000000ffffffff)
- start |= 0xffffffff00000000UL;
+ /* Guess if the sign extension was forgotten by bootloader */
+ if (start < XKPHYS)
+ start = (int)start;
#endif
initrd_start = start;
initrd_end += start;
-
return 0;
}
early_param("rd_start", rd_start_early);
@@ -159,41 +158,64 @@ early_param("rd_start", rd_start_early);
static int __init rd_size_early(char *p)
{
initrd_end += memparse(p, &p);
-
return 0;
}
early_param("rd_size", rd_size_early);
+/* it returns the next free pfn after initrd */
static unsigned long __init init_initrd(void)
{
- unsigned long tmp, end, size;
+ unsigned long end;
u32 *initrd_header;
- ROOT_DEV = Root_RAM0;
-
/*
* Board specific code or command line parser should have
* already set up initrd_start and initrd_end. In these cases
* perfom sanity checks and use them if all looks good.
*/
- size = initrd_end - initrd_start;
- if (initrd_end == 0 || size == 0) {
- initrd_start = 0;
- initrd_end = 0;
- } else
- return initrd_end;
-
- end = (unsigned long)&_end;
- tmp = PAGE_ALIGN(end) - sizeof(u32) * 2;
- if (tmp < end)
- tmp += PAGE_SIZE;
-
- initrd_header = (u32 *)tmp;
- if (initrd_header[0] == 0x494E5244) {
- initrd_start = (unsigned long)&initrd_header[2];
- initrd_end = initrd_start + initrd_header[1];
+ if (initrd_start && initrd_end > initrd_start)
+ goto sanitize;
+
+ /*
+ * See if initrd has been added to the kernel image by
+ * arch/mips/boot/addinitrd.c. In that case a header is
+ * prepended to initrd and is made up by 8 bytes. The fisrt
+ * word is a magic number and the second one is the size of
+ * initrd. Initrd start must be page aligned in any cases.
+ */
+ initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
+ if (initrd_header[0] != 0x494E5244)
+ goto disable;
+ initrd_start = (unsigned long)(initrd_header + 2);
+ initrd_end = initrd_start + initrd_header[1];
+
+sanitize:
+ if (initrd_start & ~PAGE_MASK) {
+ printk(KERN_ERR "initrd start must be page aligned\n");
+ goto disable;
}
- return initrd_end;
+ if (initrd_start < PAGE_OFFSET) {
+ printk(KERN_ERR "initrd start < PAGE_OFFSET\n");
+ goto disable;
+ }
+
+ /*
+ * Sanitize initrd addresses. For example firmware
+ * can't guess if they need to pass them through
+ * 64-bits values if the kernel has been built in pure
+ * 32-bit. We need also to switch from KSEG0 to XKPHYS
+ * addresses now, so the code can now safely use __pa().
+ */
+ end = __pa(initrd_end);
+ initrd_end = (unsigned long)__va(end);
+ initrd_start = (unsigned long)__va(__pa(initrd_start));
+
+ ROOT_DEV = Root_RAM0;
+ return PFN_UP(end);
+disable:
+ initrd_start = 0;
+ initrd_end = 0;
+ return 0;
}
static void __init finalize_initrd(void)
@@ -259,8 +281,7 @@ static void __init bootmem_init(void)
* not selected. Once that done we can determine the low bound
* of usable memory.
*/
- reserved_end = init_initrd();
- reserved_end = PFN_UP(max(__pa(reserved_end), __pa_symbol(&_end)));
+ reserved_end = max(init_initrd(), PFN_UP(__pa_symbol(&_end)));
/*
* Find the highest page frame number we have available.
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 4431ea0..072b3b0 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -502,11 +502,6 @@ void free_init_pages(char *what, unsigne
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
-#ifdef CONFIG_64BIT
- /* Switch from KSEG0 to XKPHYS addresses */
- start = (unsigned long)phys_to_virt(CPHYSADDR(start));
- end = (unsigned long)phys_to_virt(CPHYSADDR(end));
-#endif
free_init_pages("initrd memory", start, end);
}
#endif
--
1.4.2.3
next prev parent reply other threads:[~2006-10-19 11:22 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-19 11:19 [PATCH 0/7] Get ride of CPHYSADDR() in setup.c [take #4] Franck Bui-Huu
2006-10-19 11:19 ` [PATCH 1/7] page.h: remove __pa() usages Franck Bui-Huu
2006-10-19 11:20 ` [PATCH 2/7] Make __pa() aware of XKPHYS/CKSEG0 address mix for 64 bit kernels Franck Bui-Huu
2006-10-19 11:20 ` [PATCH 3/7] setup.c: get ride of CPHYSADDR() Franck Bui-Huu
2006-10-19 11:20 ` [PATCH 4/7] Introduce __pa_symbol() Franck Bui-Huu
2006-10-19 11:20 ` [PATCH 5/7] setup.c: use __pa_symbol() where needed Franck Bui-Huu
2006-10-19 11:20 ` Franck Bui-Huu [this message]
2006-10-19 11:20 ` [PATCH 7/7] Make free_init_pages() arguments to be physical addresses Franck Bui-Huu
2006-10-20 3:19 ` [PATCH 0/7] Get ride of CPHYSADDR() in setup.c [take #4] Atsushi Nemoto
-- strict thread matches above, loose matches on Subject: below --
2006-10-16 16:12 [PATCH 0/7] Get ride of CPHYSADDR() in setup.c [take #3] Franck Bui-Huu
2006-10-16 16:12 ` [PATCH 6/7] setup.c: clean up initrd related code Franck Bui-Huu
2006-10-13 12:38 [PATCH 0/7] Get ride of CPHYSADDR() in setup.c [take #2] Franck Bui-Huu
2006-10-13 12:39 ` [PATCH 6/7] setup.c: clean up initrd related code Franck Bui-Huu
2006-10-16 8:03 ` Franck Bui-Huu
2006-10-16 8:10 ` Atsushi Nemoto
2006-10-16 8:48 ` Franck Bui-Huu
2006-10-16 9:07 ` Atsushi Nemoto
2006-10-16 9:54 ` Thiemo Seufer
2006-10-16 10:19 ` Atsushi Nemoto
2006-10-16 14:42 ` Franck Bui-Huu
2006-10-16 14:51 ` Franck Bui-Huu
2006-10-16 9:09 ` Thiemo Seufer
2006-10-16 14:23 ` Franck Bui-Huu
2006-10-16 14:49 ` Franck Bui-Huu
2006-10-19 4:13 ` Atsushi Nemoto
2006-10-19 6:37 ` Franck Bui-Huu
2006-10-19 6:51 ` Atsushi Nemoto
2006-10-19 7:29 ` Franck Bui-Huu
2006-10-19 7:51 ` Atsushi Nemoto
2006-10-19 8:30 ` Franck Bui-Huu
2006-10-19 8:39 ` Franck Bui-Huu
2006-10-19 9:15 ` Atsushi Nemoto
2006-10-19 9:54 ` Franck Bui-Huu
2006-10-19 10:30 ` Atsushi Nemoto
2006-10-19 10:51 ` Franck Bui-Huu
2006-10-19 11:00 ` Atsushi Nemoto
2006-10-19 11:12 ` Franck Bui-Huu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11612568061590-git-send-email-fbuihuu@gmail.com \
--to=vagabon.xyz@gmail.com \
--cc=anemo@mba.ocn.ne.jp \
--cc=fbuihuu@gmail.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=ths@networkno.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox