Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: tiansm@lemote.com
To: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Subject: [PATCH 3/16] Kconfig update for lemote fulong mini-PC
Date: Sun, 15 Apr 2007 23:25:52 +0800	[thread overview]
Message-ID: <11766507662638-git-send-email-tiansm@lemote.com> (raw)
In-Reply-To: <11766507661726-git-send-email-tiansm@lemote.com>

From: Fuxin Zhang <zhangfx@lemote.com>


Signed-off-by: Fuxin Zhang <zhangfx@lemote.com>
---
 arch/mips/Kconfig |   38 ++++++++++++++++++++++++++++++++++++++
 1 files changed, 38 insertions(+), 0 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 338bfa3..c18a835 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -16,6 +16,27 @@ choice
 	prompt "System type"
 	default SGI_IP22
 
+config LEMOTE_FULONG
+	bool "Support for Lemote's fulong mini-PC"
+	select SYS_HAS_CPU_LOONGSON2
+	select DMA_NONCOHERENT
+	select BOOT_ELF32
+	select BOARD_SCACHE
+	select HW_HAS_PCI
+	select I8259
+	select ISA
+	select IRQ_CPU
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_HAS_EARLY_PRINTK
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select CPU_HAS_WB
+	help
+        Lemote Fulong mini-PC board, which uses Chinese Loongson-2E CPU and a fpga north bridge
+
+
 config MIPS_MTX1
 	bool "4G Systems MTX-1 board"
 	select DMA_NONCOHERENT
@@ -1142,6 +1163,13 @@ choice
 	prompt "CPU type"
 	default CPU_R4X00
 
+config CPU_LOONGSON2
+	bool "LOONGSON2"
+	depends on SYS_HAS_CPU_LOONGSON2
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
@@ -1352,6 +1380,9 @@ config CPU_SB1
 
 endchoice
 
+config SYS_HAS_CPU_LOONGSON2
+	bool
+
 config SYS_HAS_CPU_MIPS32_R1
 	bool
 
@@ -1681,6 +1712,13 @@ config CPU_HAS_SMARTMIPS
 config CPU_HAS_WB
 	bool
 
+config 64BIT_CONTEXT
+	bool "Save 64bit integer registers" if CPU_LOONGSON2 && 32BIT
+	help
+	  Loongson2 CPU is 64bit , when used in 32BIT mode, its integer registers
+	  can still be accessed as 64bit, mainly for multimedia instructions. We must have
+	  all 64bit save/restored to make sure those instructions to get correct result.
+
 #
 # Vectored interrupt mode is an R2 feature
 #
-- 
1.4.4.1

  reply	other threads:[~2007-04-15 15:29 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-04-15 15:25 lemote-fulong patch update tiansm
2007-04-15 15:25 ` [PATCH 1/16] new files for lemote fulong mini-PC support tiansm
2007-04-15 15:25   ` [PATCH 2/16] arch related Makefile update for lemote fulong mini-PC tiansm
2007-04-15 15:25     ` tiansm [this message]
2007-04-15 15:25       ` [PATCH 4/16] TO_PHYS_MASK for loongson2 tiansm
2007-04-15 15:25         ` [PATCH 5/16] add MACH_GROUP_LEMOTE & MACH_LEMOTE_FULONG tiansm
2007-04-15 15:25           ` [PATCH 6/16] define Hit_Invalidate_I to Index_Invalidate_I for loongson2 tiansm
2007-04-15 15:25             ` [PATCH 7/16] add Loongson processor definitions tiansm
2007-04-15 15:25               ` [PATCH 8/16] define MODULE_PROC_FAMILY for Loongson2 tiansm
2007-04-15 15:25                 ` [PATCH 9/16] add serial port definition for lemote fulong tiansm
2007-04-15 15:25                   ` [PATCH 10/16] make cpu_probe recognize Loongson2 tiansm
2007-04-15 15:26                     ` [PATCH 11/16] add Loongson support to /proc/cpuinfo tiansm
2007-04-15 15:26                       ` [PATCH 12/16] cheat for support of more than 256MB memory tiansm
2007-04-15 15:26                         ` [PATCH 13/16] define MODULE_PROC_FAMILY for Loongson2 tiansm
2007-04-15 15:26                           ` [PATCH 14/16] tlb handling support for Loongson2 processor tiansm
2007-04-15 15:26                             ` [PATCH 15/16] work around for more than 256MB memory support tiansm
2007-04-15 15:26                               ` [PATCH 16/16] alsa sound support for mips tiansm
2007-04-18 13:54                                 ` Ralf Baechle
2007-04-18 14:13                                   ` Fuxin Zhang
2007-04-20  9:39                                     ` Atsushi Nemoto
2007-04-18 12:11             ` [PATCH 6/16] define Hit_Invalidate_I to Index_Invalidate_I for loongson2 Ralf Baechle
2007-04-18 13:51               ` Fuxin Zhang
2007-04-18 13:56                 ` Fuxin Zhang
2007-04-18 12:02         ` [PATCH 4/16] TO_PHYS_MASK " Ralf Baechle
2007-04-18 12:06       ` [PATCH 3/16] Kconfig update for lemote fulong mini-PC Ralf Baechle
2007-04-18 13:32         ` Fuxin Zhang
2007-04-18 15:28           ` Uhler, Mike
2007-04-18 15:28             ` Uhler, Mike
2007-04-18 15:43             ` Fuxin Zhang
2007-04-18 16:38             ` Ralf Baechle
2007-04-18 22:27               ` Uhler, Mike
2007-04-18 22:27                 ` Uhler, Mike
2007-04-19  0:34                 ` Ralf Baechle
2007-04-15 22:28     ` [PATCH 2/16] arch related Makefile " Thiemo Seufer
2007-04-16  7:37       ` Tian
2007-04-16  8:48       ` Fuxin Zhang
2007-04-16  8:49       ` Zhang Fuxin
2007-04-16 12:44         ` Thiemo Seufer
2007-04-16 14:01           ` Ralf Baechle
2007-04-16 15:10           ` Zhang Fuxin
  -- strict thread matches above, loose matches on Subject: below --
2007-04-04 14:38 [PATCH 3/16] Kconfig " zhangfx

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11766507662638-git-send-email-tiansm@lemote.com \
    --to=tiansm@lemote.com \
    --cc=linux-mips@linux-mips.org \
    --cc=zhangfx@lemote.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox