From: tiansm@lemote.com
To: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Subject: [PATCH 14/15] tlb handling support for Loongson2 processor
Date: Wed, 6 Jun 2007 14:52:51 +0800 [thread overview]
Message-ID: <1181112774155-git-send-email-tiansm@lemote.com> (raw)
In-Reply-To: <11811127722019-git-send-email-tiansm@lemote.com>
From: Fuxin Zhang <zhangfx@lemote.com>
Signed-off-by: Fuxin Zhang <zhangfx@lemote.com>
---
arch/mips/mm/tlb-r4k.c | 23 ++++++++++++++++++++++-
arch/mips/mm/tlbex.c | 8 +++++---
2 files changed, 27 insertions(+), 4 deletions(-)
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 65160d4..dcd6913 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -48,6 +48,22 @@ extern void build_tlb_refill_handler(void);
#endif /* CONFIG_MIPS_MT_SMTC */
+#if defined(CONFIG_CPU_LOONGSON2)
+/*
+ * LOONGSON2 has a 4 entry itlb which is a subset of dtlb,
+ * unfortrunately, itlb is not totally transparent to software.
+ */
+#define FLUSH_ITLB write_c0_diag(4);
+
+#define FLUSH_ITLB_VM(vma) { if ((vma)->vm_flags & VM_EXEC) write_c0_diag(4); }
+
+#else
+
+#define FLUSH_ITLB
+#define FLUSH_ITLB_VM(vma)
+
+#endif
+
void local_flush_tlb_all(void)
{
unsigned long flags;
@@ -73,6 +89,7 @@ void local_flush_tlb_all(void)
}
tlbw_use_hazard();
write_c0_entryhi(old_ctx);
+ FLUSH_ITLB;
EXIT_CRITICAL(flags);
}
@@ -136,6 +153,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
} else {
drop_mmu_context(mm, cpu);
}
+ FLUSH_ITLB;
EXIT_CRITICAL(flags);
}
}
@@ -178,6 +196,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
} else {
local_flush_tlb_all();
}
+ FLUSH_ITLB;
EXIT_CRITICAL(flags);
}
@@ -210,6 +229,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
finish:
write_c0_entryhi(oldpid);
+ FLUSH_ITLB_VM(vma);
EXIT_CRITICAL(flags);
}
}
@@ -241,7 +261,7 @@ void local_flush_tlb_one(unsigned long page)
tlbw_use_hazard();
}
write_c0_entryhi(oldpid);
-
+ FLUSH_ITLB;
EXIT_CRITICAL(flags);
}
@@ -293,6 +313,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
else
tlb_write_indexed();
tlbw_use_hazard();
+ FLUSH_ITLB_VM(vma);
EXIT_CRITICAL(flags);
}
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index e714929..4ec0964 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -893,6 +893,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
case CPU_4KSC:
case CPU_20KC:
case CPU_25KF:
+ case CPU_LOONGSON2:
tlbw(p);
break;
@@ -1276,7 +1277,8 @@ static void __init build_r4000_tlb_refill_handler(void)
* need three, with the second nop'ed and the third being
* unused.
*/
-#ifdef CONFIG_32BIT
+ /* Loongson2 ebase is different than r4k, we have more space */
+#if defined(CONFIG_32BIT) || defined(CONFIG_CPU_LOONGSON2)
if ((p - tlb_handler) > 64)
panic("TLB refill handler space exceeded");
#else
@@ -1289,7 +1291,7 @@ static void __init build_r4000_tlb_refill_handler(void)
/*
* Now fold the handler in the TLB refill handler space.
*/
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) || defined(CONFIG_CPU_LOONGSON2)
f = final_handler;
/* Simplest case, just copy the handler. */
copy_handler(relocs, labels, tlb_handler, p, f);
@@ -1336,7 +1338,7 @@ static void __init build_r4000_tlb_refill_handler(void)
final_len);
f = final_handler;
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && !defined(CONFIG_CPU_LOONGSON2)
if (final_len > 32)
final_len = 64;
else
--
1.5.2.1
next prev parent reply other threads:[~2007-06-06 6:57 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-06 6:52 Lemote Loongson 2E patch update [take 2] tiansm
2007-06-06 6:52 ` [PATCH 01/15] new files for lemote fulong mini-PC support tiansm
2007-06-11 15:40 ` Ralf Baechle
2007-06-06 6:52 ` [PATCH 02/15] arch related Makefile update for lemote fulong mini-PC tiansm
2007-06-06 6:52 ` [PATCH 03/15] Kconfig update for lemote fulong miniPC tiansm
2007-06-06 6:52 ` [PATCH 04/15] TO_PHYS_MASK for loongson2 tiansm
2007-06-06 17:41 ` Ralf Baechle
2007-06-06 6:52 ` [PATCH 05/15] add MACH_GROUP_LEMOTE & MACH_LEMOTE_FULONG tiansm
2007-06-06 6:52 ` [PATCH 06/15] define Hit_Invalidate_I to Index_Invalidate_I for loongson2 tiansm
2007-06-06 6:52 ` [PATCH 07/15] add Loongson processor definitions tiansm
2007-06-06 6:52 ` [PATCH 08/15] define MODULE_PROC_FAMILY for Loongson2 tiansm
2007-06-06 6:52 ` [PATCH 09/15] add serial port definition for lemote fulong tiansm
2007-06-12 12:34 ` Ralf Baechle
2007-06-12 12:57 ` Fuxin Zhang
2007-06-12 13:01 ` Ralf Baechle
2007-06-13 18:57 ` Ralf Baechle
2007-06-06 6:52 ` [PATCH 10/15] make cpu_probe recognize Loongson2 tiansm
2007-06-06 6:52 ` [PATCH 11/15] add Loongson support to /proc/cpuinfo tiansm
2007-06-06 6:52 ` [PATCH 12/15] cheat for support of more than 256MB memory tiansm
2007-06-06 6:52 ` [PATCH 13/15] define MODULE_PROC_FAMILY for Loongson2 tiansm
2007-06-06 6:52 ` tiansm [this message]
2007-06-06 6:52 ` [PATCH 15/15] work around for more than 256MB memory support tiansm
2007-06-06 8:01 ` Franck Bui-Huu
2007-06-06 18:28 ` Ralf Baechle
2007-06-07 6:04 ` [PATCH] override of arch/mips/mm/cache.c: __uncached_access tiansm
2007-06-07 6:22 ` Fuxin Zhang
2007-06-07 17:05 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1181112774155-git-send-email-tiansm@lemote.com \
--to=tiansm@lemote.com \
--cc=linux-mips@linux-mips.org \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox