From: Wu Zhangjin <wuzhangjin@gmail.com>
To: David Daney <ddaney@caviumnetworks.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
linux-mips@linux-mips.org, Yan hua <yanh@lemote.com>,
Philippe Vachon <philippe@cowpig.ca>,
Zhang Le <r0bertz@gentoo.org>, Zhang Fuxin <zhangfx@lemote.com>,
Arnaud Patard <apatard@mandriva.com>,
loongson-dev@googlegroups.com, gnewsense-dev@nongnu.org,
Nicholas Mc Guire <hofrat@hofr.at>,
Liu Junliang <liujl@lemote.com>, Erwan Lerale <erwan@thiscow.com>
Subject: Re: [loongson-PATCH-v1 01/27] fix-warning: incompatible argument type of pci_fixup_irqs
Date: Thu, 21 May 2009 07:20:40 +0800 [thread overview]
Message-ID: <1242861640.21692.569.camel@falcon> (raw)
In-Reply-To: <4A147FFC.5070608@caviumnetworks.com>
On Wed, 2009-05-20 at 15:11 -0700, David Daney wrote:
> wuzhangjin@gmail.com wrote:
> > From: Wu Zhangjin <wuzhangjin@gmail.com>
> >
> > arch/mips/pci/pci.c:160: warning: passing argument 2 of ‘pci_fixup_irqs’
> > from incompatible pointer type
> >
> > include/linux/pci.h:
> >
> > void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
> > int (*)(struct pci_dev *, u8, u8));
> >
> > arch/mips/pci/pci.c:160:
> >
> > pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq);
> >
> > arch/mips/include/asm/pci.h:
> >
> > extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
> >
> > arch/mips/pci/fixup-malta.c
> >
> > int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> >
> > Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
>
> This is the correct fix, however there are now Cavium Octeon PCI drivers
> on Ralf's queue.
>
> If you rebase against the queue (or even if you don't), you can add:
>
> Reviewed-by: David Daney <ddaney@caviumnetworks.com>
>
Merged the lastest ralf's git tree, Rebased, updated and added the
Reviewed-by flag.
BTW: i have resent this patch with some update, is there a method to
attach the new E-mail to this one?
thanks!
Wu Zhangjin
> > ---
> > arch/mips/include/asm/pci.h | 2 +-
> > arch/mips/pci/fixup-au1000.c | 2 +-
> > arch/mips/pci/fixup-capcella.c | 2 +-
> > arch/mips/pci/fixup-cobalt.c | 2 +-
> > arch/mips/pci/fixup-emma2rh.c | 2 +-
> > arch/mips/pci/fixup-excite.c | 2 +-
> > arch/mips/pci/fixup-ip32.c | 2 +-
> > arch/mips/pci/fixup-lm2e.c | 2 +-
> > arch/mips/pci/fixup-malta.c | 2 +-
> > arch/mips/pci/fixup-mpc30x.c | 2 +-
> > arch/mips/pci/fixup-pmcmsp.c | 2 +-
> > arch/mips/pci/fixup-pnx8550.c | 2 +-
> > arch/mips/pci/fixup-rc32434.c | 2 +-
> > arch/mips/pci/fixup-sni.c | 2 +-
> > arch/mips/pci/fixup-tb0219.c | 2 +-
> > arch/mips/pci/fixup-tb0226.c | 2 +-
> > arch/mips/pci/fixup-tb0287.c | 2 +-
> > arch/mips/pci/fixup-wrppmc.c | 2 +-
> > arch/mips/pci/fixup-yosemite.c | 2 +-
> > arch/mips/pci/pci-bcm1480.c | 2 +-
> > arch/mips/pci/pci-bcm47xx.c | 2 +-
> > arch/mips/pci/pci-ip27.c | 2 +-
> > arch/mips/pci/pci-lasat.c | 2 +-
> > arch/mips/pci/pci-sb1250.c | 2 +-
> > arch/mips/txx9/generic/pci.c | 2 +-
> > 25 files changed, 25 insertions(+), 25 deletions(-)
> >
> > diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
> > index 053e463..42b895b 100644
> > --- a/arch/mips/include/asm/pci.h
> > +++ b/arch/mips/include/asm/pci.h
> > @@ -56,7 +56,7 @@ extern void register_pci_controller(struct pci_controller *hose);
> > /*
> > * board supplied pci irq fixup routine
> > */
> > -extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
> > +extern int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
> >
> >
> > /* Can be used to override the logic in pci_scan_bus for skipping
> > diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
> > index e2ddfc4..15b8ecc 100644
> > --- a/arch/mips/pci/fixup-au1000.c
> > +++ b/arch/mips/pci/fixup-au1000.c
> > @@ -31,7 +31,7 @@
> >
> > extern char irq_tab_alchemy[][5];
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > return irq_tab_alchemy[slot][pin];
> > }
> > diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c
> > index 1416bca..1e53075 100644
> > --- a/arch/mips/pci/fixup-capcella.c
> > +++ b/arch/mips/pci/fixup-capcella.c
> > @@ -38,7 +38,7 @@ static char irq_tab_capcella[][5] __initdata = {
> > [14] = { -1, INTA, INTB, INTC, INTD }
> > };
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > return irq_tab_capcella[slot][pin];
> > }
> > diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
> > index 9553b14..63d1af3 100644
> > --- a/arch/mips/pci/fixup-cobalt.c
> > +++ b/arch/mips/pci/fixup-cobalt.c
> > @@ -175,7 +175,7 @@ static char irq_tab_raq2[] __initdata = {
> > [COBALT_PCICONF_ETH1] = ETH1_IRQ
> > };
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > if (cobalt_board_id <= COBALT_BRD_ID_QUBE1)
> > return irq_tab_qube1[slot];
> > diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c
> > index fba5aad..04c28f3 100644
> > --- a/arch/mips/pci/fixup-emma2rh.c
> > +++ b/arch/mips/pci/fixup-emma2rh.c
> > @@ -88,7 +88,7 @@ static void __devinit emma2rh_pci_host_fixup(struct pci_dev *dev)
> > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_EMMA2RH,
> > emma2rh_pci_host_fixup);
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > return irq_map[slot][pin];
> > }
> > diff --git a/arch/mips/pci/fixup-excite.c b/arch/mips/pci/fixup-excite.c
> > index cd64d9f..1da696d 100644
> > --- a/arch/mips/pci/fixup-excite.c
> > +++ b/arch/mips/pci/fixup-excite.c
> > @@ -21,7 +21,7 @@
> > #include <linux/pci.h>
> > #include <excite.h>
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > if (pin == 0)
> > return -1;
> > diff --git a/arch/mips/pci/fixup-ip32.c b/arch/mips/pci/fixup-ip32.c
> > index 190fffd..3e66b0a 100644
> > --- a/arch/mips/pci/fixup-ip32.c
> > +++ b/arch/mips/pci/fixup-ip32.c
> > @@ -39,7 +39,7 @@ static char irq_tab_mace[][5] __initdata = {
> > * irqs. I suppose a device without a pin A will thank us for doing it
> > * right if there exists such a broken piece of crap.
> > */
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > return irq_tab_mace[slot][pin];
> > }
> > diff --git a/arch/mips/pci/fixup-lm2e.c b/arch/mips/pci/fixup-lm2e.c
> > index e18ae4f..08de000 100644
> > --- a/arch/mips/pci/fixup-lm2e.c
> > +++ b/arch/mips/pci/fixup-lm2e.c
> > @@ -36,7 +36,7 @@
> > /* South bridge slot number is set by the pci probe process */
> > static u8 sb_slot = 5;
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > int irq = 0;
> >
> > diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c
> > index 0f48498..bf2c41d 100644
> > --- a/arch/mips/pci/fixup-malta.c
> > +++ b/arch/mips/pci/fixup-malta.c
> > @@ -36,7 +36,7 @@ static char irq_tab[][5] __initdata = {
> > {0, PCID, PCIA, PCIB, PCIC } /* 21: PCI Slot 4 */
> > };
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > int virq;
> > virq = irq_tab[slot][pin];
> > diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c
> > index 5911596..3c9ae41 100644
> > --- a/arch/mips/pci/fixup-mpc30x.c
> > +++ b/arch/mips/pci/fixup-mpc30x.c
> > @@ -34,7 +34,7 @@ static const int irq_tab_mpc30x[] __initdata = {
> > [29] = MQ200_IRQ,
> > };
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > if (slot == 30)
> > return internal_func_irqs[PCI_FUNC(dev->devfn)];
> > diff --git a/arch/mips/pci/fixup-pmcmsp.c b/arch/mips/pci/fixup-pmcmsp.c
> > index 65735b1..0026121 100644
> > --- a/arch/mips/pci/fixup-pmcmsp.c
> > +++ b/arch/mips/pci/fixup-pmcmsp.c
> > @@ -202,7 +202,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
> > * RETURNS: IRQ number
> > *
> > ****************************************************************************/
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > #if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL)
> > printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n");
> > diff --git a/arch/mips/pci/fixup-pnx8550.c b/arch/mips/pci/fixup-pnx8550.c
> > index 96857ac..50546da 100644
> > --- a/arch/mips/pci/fixup-pnx8550.c
> > +++ b/arch/mips/pci/fixup-pnx8550.c
> > @@ -45,7 +45,7 @@ void __init pcibios_fixup(void)
> > /* nothing to do here */
> > }
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > return pnx8550_irq_tab[slot][pin];
> > }
> > diff --git a/arch/mips/pci/fixup-rc32434.c b/arch/mips/pci/fixup-rc32434.c
> > index 3d86823..68f8537 100644
> > --- a/arch/mips/pci/fixup-rc32434.c
> > +++ b/arch/mips/pci/fixup-rc32434.c
> > @@ -37,7 +37,7 @@ static int __devinitdata irq_map[2][12] = {
> > {0, 0, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3}
> > };
> >
> > -int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > int irq = 0;
> >
> > diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c
> > index 5c8a79b..4ce73be 100644
> > --- a/arch/mips/pci/fixup-sni.c
> > +++ b/arch/mips/pci/fixup-sni.c
> > @@ -130,7 +130,7 @@ static inline int is_rm300_revd(void)
> > return (csmsr & 0xa0) == 0x20;
> > }
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > switch (sni_brd_type) {
> > case SNI_BRD_PCI_TOWER_CPLUS:
> > diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c
> > index ed87733..0f8d31b 100644
> > --- a/arch/mips/pci/fixup-tb0219.c
> > +++ b/arch/mips/pci/fixup-tb0219.c
> > @@ -23,7 +23,7 @@
> >
> > #include <asm/vr41xx/tb0219.h>
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > int irq = -1;
> >
> > diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c
> > index e3eedf4..c9e7cb4 100644
> > --- a/arch/mips/pci/fixup-tb0226.c
> > +++ b/arch/mips/pci/fixup-tb0226.c
> > @@ -23,7 +23,7 @@
> > #include <asm/vr41xx/giu.h>
> > #include <asm/vr41xx/tb0226.h>
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > int irq = -1;
> >
> > diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c
> > index 267ab3d..fbe6bcb 100644
> > --- a/arch/mips/pci/fixup-tb0287.c
> > +++ b/arch/mips/pci/fixup-tb0287.c
> > @@ -22,7 +22,7 @@
> >
> > #include <asm/vr41xx/tb0287.h>
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > unsigned char bus;
> > int irq = -1;
> > diff --git a/arch/mips/pci/fixup-wrppmc.c b/arch/mips/pci/fixup-wrppmc.c
> > index 3d27754..3357c13 100644
> > --- a/arch/mips/pci/fixup-wrppmc.c
> > +++ b/arch/mips/pci/fixup-wrppmc.c
> > @@ -25,7 +25,7 @@ static char pci_irq_tab[PCI_SLOT_MAXNR][5] __initdata = {
> > [6] = {0, WRPPMC_PCI_INTA_IRQ, 0, 0, 0},
> > };
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > return pci_irq_tab[slot][pin];
> > }
> > diff --git a/arch/mips/pci/fixup-yosemite.c b/arch/mips/pci/fixup-yosemite.c
> > index fdafb13..81d77a5 100644
> > --- a/arch/mips/pci/fixup-yosemite.c
> > +++ b/arch/mips/pci/fixup-yosemite.c
> > @@ -26,7 +26,7 @@
> > #include <linux/init.h>
> > #include <linux/pci.h>
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > if (pin == 0)
> > return -1;
> > diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
> > index a9060c7..41e691a 100644
> > --- a/arch/mips/pci/pci-bcm1480.c
> > +++ b/arch/mips/pci/pci-bcm1480.c
> > @@ -74,7 +74,7 @@ static inline void WRITECFG32(u32 addr, u32 data)
> > *(u32 *)(cfg_space + (addr & ~3)) = data;
> > }
> >
> > -int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > if (pin == 0)
> > return -1;
> > diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c
> > index bea9b6c..1f3721d 100644
> > --- a/arch/mips/pci/pci-bcm47xx.c
> > +++ b/arch/mips/pci/pci-bcm47xx.c
> > @@ -26,7 +26,7 @@
> > #include <linux/pci.h>
> > #include <linux/ssb/ssb.h>
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > return 0;
> > }
> > diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
> > index dda6f20..a2a5b5d 100644
> > --- a/arch/mips/pci/pci-ip27.c
> > +++ b/arch/mips/pci/pci-ip27.c
> > @@ -141,7 +141,7 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
> > * A given PCI device, in general, should be able to intr any of the cpus
> > * on any one of the hubs connected to its xbow.
> > */
> > -int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > return 0;
> > }
> > diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
> > index a98e543..149d503 100644
> > --- a/arch/mips/pci/pci-lasat.c
> > +++ b/arch/mips/pci/pci-lasat.c
> > @@ -61,7 +61,7 @@ arch_initcall(lasat_pci_setup);
> > #define LASAT_IRQ_PCIC (LASAT_IRQ_BASE + 7)
> > #define LASAT_IRQ_PCID (LASAT_IRQ_BASE + 8)
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > switch (slot) {
> > case 1:
> > diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
> > index bf63959..bd26d4a 100644
> > --- a/arch/mips/pci/pci-sb1250.c
> > +++ b/arch/mips/pci/pci-sb1250.c
> > @@ -84,7 +84,7 @@ static inline void WRITECFG32(u32 addr, u32 data)
> > *(u32 *) (cfg_space + (addr & ~3)) = data;
> > }
> >
> > -int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > return dev->irq;
> > }
> > diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
> > index 7b637a7..27104f7 100644
> > --- a/arch/mips/txx9/generic/pci.c
> > +++ b/arch/mips/txx9/generic/pci.c
> > @@ -382,7 +382,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
> > return 0;
> > }
> >
> > -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> > +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
> > {
> > return txx9_board_vec->pci_map_irq(dev, slot, pin);
> > }
>
next prev parent reply other threads:[~2009-05-20 23:21 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-20 21:48 [loongson-PATCH-v1 00/27] linux patches of loongson-based machines wuzhangjin
2009-05-20 21:49 ` [loongson-PATCH-v1 01/27] fix-warning: incompatible argument type of pci_fixup_irqs wuzhangjin
2009-05-20 22:11 ` David Daney
2009-05-20 23:20 ` Wu Zhangjin [this message]
2009-05-21 8:13 ` Ralf Baechle
2009-05-20 21:49 ` [loongson-PATCH-v1 02/27] fix-warning: incompatible argument type of virt_to_phys wuzhangjin
2009-05-21 8:06 ` Ralf Baechle
2009-05-20 21:50 ` [loongson-PATCH-v1 03/27] fix-error: incompatiable argument type of clear_user wuzhangjin
2009-05-21 7:51 ` Ralf Baechle
2009-05-20 21:50 ` [loongson-PATCH-v1 04/27] change the naming methods wuzhangjin
2009-05-20 21:50 ` [loongson-PATCH-v1 05/27] remove reference to bonito64.h wuzhangjin
2009-05-20 21:51 ` [loongson-PATCH-v1 06/27] divide the files to the smallest logic unit wuzhangjin
2009-05-20 21:51 ` [loongson-PATCH-v1 07/27] replace tons of magic numbers by understandable symbols wuzhangjin
2009-05-20 21:52 ` [loongson-PATCH-v1 08/27] clean up the early printk support for fuloong(2e) wuzhangjin
2009-05-20 21:52 ` [loongson-PATCH-v1 09/27] enable Real Time Clock Support " wuzhangjin
2009-05-20 21:54 ` [loongson-PATCH-v1 10/27] add loongson-specific cpu-feature-overrides.h wuzhangjin
2009-05-20 21:54 ` [loongson-PATCH-v1 11/27] split the loongson-specific part out wuzhangjin
2009-05-20 22:05 ` [loongson-PATCH-v1 12/27] add basic loongson-2f support wuzhangjin
2009-05-20 22:06 ` [loongson-PATCH-v1 13/27] add basic fuloong(2f) support wuzhangjin
2009-05-20 22:06 ` [loongson-PATCH-v1 14/27] enable serial port support of loongson-based machines wuzhangjin
2009-05-20 22:07 ` [loongson-PATCH-v1 15/27] add basic yeeloong(2f) laptop support wuzhangjin
2009-05-20 22:08 ` [loongson-PATCH-v1 16/27] Add Siliconmotion 712 framebuffer driver wuzhangjin
2009-05-29 13:29 ` Simon Braunschmidt
2009-05-29 19:51 ` Wu Zhangjin
2009-06-01 7:41 ` Wu Zhangjin
2009-06-01 7:41 ` Wu Zhangjin
2009-05-20 22:08 ` [loongson-PATCH-v1 17/27] define Loongson2F arch specific phys prot access wuzhangjin
2009-05-20 22:09 ` [loongson-PATCH-v1 18/27] Loongson2 specific OProfile driver wuzhangjin
2009-05-20 22:10 ` [loongson-PATCH-v1 19/27] flush posted write to irq wuzhangjin
2009-05-20 22:10 ` [loongson-PATCH-v1 20/27] CS5536 MFGPT as system clock source support wuzhangjin
2009-05-20 22:10 ` [loongson-PATCH-v1 21/27] Loongson2F cpufreq support wuzhangjin
2009-05-20 22:11 ` [loongson-PATCH-v1 22/27] Hibernation Support in mips system wuzhangjin
2009-05-21 12:43 ` Ralf Baechle
2009-05-24 13:13 ` Wu Zhangjin
2009-05-22 13:01 ` Atsushi Nemoto
2009-05-23 8:06 ` yanh
2009-05-23 12:30 ` Atsushi Nemoto
2009-05-26 1:43 ` yanh
2009-05-26 2:27 ` Hongbing Hu
2009-05-26 14:48 ` Atsushi Nemoto
2009-05-20 22:11 ` [loongson-PATCH-v1 23/27] Alsa memory maps fixup on mips systems wuzhangjin
2009-05-20 22:18 ` David Daney
2009-05-20 23:36 ` Wu Zhangjin
2009-05-20 22:12 ` [loongson-PATCH-v1 24/27] fixup for FUJITSU disk wuzhangjin
2009-05-22 18:32 ` Bartlomiej Zolnierkiewicz
2009-05-23 7:11 ` yanh
2009-05-23 11:47 ` Bartlomiej Zolnierkiewicz
2009-05-25 5:45 ` yanh
2009-05-25 7:35 ` 胡洪兵
2009-05-25 14:56 ` Bartlomiej Zolnierkiewicz
2009-05-25 19:05 ` Sergei Shtylyov
2009-05-25 19:10 ` Martin K. Petersen
2009-05-25 19:17 ` Sergei Shtylyov
2009-05-26 1:21 ` yanh
2009-05-26 7:56 ` Alan Cox
2009-05-26 14:39 ` yanh
2009-05-20 22:13 ` [loongson-PATCH-v1 25/27] Flush RAS and BTB for CPU predictively execution wuzhangjin
2009-05-20 22:13 ` [loongson-PATCH-v1 26/27] add default kernel config file for loongson-based machines wuzhangjin
2009-05-20 22:14 ` [loongson-PATCH-v1 27/27] add gcc 4.4 support for MIPS and loongson wuzhangjin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1242861640.21692.569.camel@falcon \
--to=wuzhangjin@gmail.com \
--cc=apatard@mandriva.com \
--cc=ddaney@caviumnetworks.com \
--cc=erwan@thiscow.com \
--cc=gnewsense-dev@nongnu.org \
--cc=hofrat@hofr.at \
--cc=linux-mips@linux-mips.org \
--cc=liujl@lemote.com \
--cc=loongson-dev@googlegroups.com \
--cc=philippe@cowpig.ca \
--cc=r0bertz@gentoo.org \
--cc=ralf@linux-mips.org \
--cc=yanh@lemote.com \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox