Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Huacai Chen <chenhc@lemote.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>,
	"Steven J. Hill" <Steven.Hill@imgtec.com>,
	linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
	Zhangjin Wu <wuzhangjin@gmail.com>,
	Huacai Chen <chenhc@lemote.com>, Hongliang Tao <taohl@lemote.com>,
	Hua Yan <yanh@lemote.com>
Subject: [PATCH V15 01/12] MIPS: Loongson: Add basic Loongson-3 definition
Date: Sun, 15 Dec 2013 20:14:25 +0800	[thread overview]
Message-ID: <1387109676-540-2-git-send-email-chenhc@lemote.com> (raw)
In-Reply-To: <1387109676-540-1-git-send-email-chenhc@lemote.com>

Loongson-3 is a multi-core MIPS family CPU, it support MIPS64R2 fully.
Loongson-3 has the same IMP field (0x6300) as Loongson-2.

Loongson-3 has a hardware-maintained cache, system software doesn't
need to maintain coherency.

Loongson-3A is the first revision of Loongson-3, and it is the quad-
core version of Loongson-2G. Loongson-3A has a simplified version named
Loongson-2Gq, the main difference between Loongson-3A/2Gq is 3A has two
HyperTransport controller but 2Gq has only one. HT0 is used for cross-
chip interconnection and HT1 is used to link PCI bus. Therefore, 2Gq
cannot support NUMA but 3A can. For software, Loongson-2Gq is simply
identified as Loongson-3A.

Exsisting Loongson family CPUs:
Loongson-1: Loongson-1A, Loongson-1B, they are 32-bit MIPS CPUs.
Loongson-2: Loongson-2E, Loongson-2F, Loongson-2G, they are 64-bit
            single-core MIPS CPUs.
Loongson-3: Loongson-3A(including so-called Loongson-2Gq), they are
            64-bit multi-core MIPS CPUs.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Hongliang Tao <taohl@lemote.com>
Signed-off-by: Hua Yan <yanh@lemote.com>
---
 arch/mips/include/asm/addrspace.h            |    2 ++
 arch/mips/include/asm/cpu.h                  |    5 +++--
 arch/mips/include/asm/mach-loongson/spaces.h |   19 +++++++++++++++++++
 arch/mips/include/asm/module.h               |    2 ++
 arch/mips/include/asm/pgtable-bits.h         |    7 +++++++
 5 files changed, 33 insertions(+), 2 deletions(-)
 create mode 100644 arch/mips/include/asm/mach-loongson/spaces.h

diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index 3f74545..41c030e 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -116,7 +116,9 @@
 #define K_CALG_UNCACHED		2
 #define K_CALG_NONCOHERENT	3
 #define K_CALG_COH_EXCL		4
+#ifndef K_CALG_COH_SHAREABLE
 #define K_CALG_COH_SHAREABLE	5
+#endif
 #define K_CALG_NOTUSED		6
 #define K_CALG_UNCACHED_ACCEL	7
 
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index d2035e1..7fffaf1 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -224,6 +224,7 @@
 #define PRID_REV_LOONGSON1B	0x0020
 #define PRID_REV_LOONGSON2E	0x0002
 #define PRID_REV_LOONGSON2F	0x0003
+#define PRID_REV_LOONGSON3A	0x0005
 
 /*
  * Older processors used to encode processor version and revision in two
@@ -295,8 +296,8 @@ enum cpu_type_enum {
 	 * MIPS64 class processors
 	 */
 	CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
-	CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
-	CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP,
+	CPU_LOONGSON3, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS,
+	CPU_CAVIUM_OCTEON2, CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP,
 
 	CPU_LAST
 };
diff --git a/arch/mips/include/asm/mach-loongson/spaces.h b/arch/mips/include/asm/mach-loongson/spaces.h
new file mode 100644
index 0000000..e32c9ad
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/spaces.h
@@ -0,0 +1,19 @@
+#ifndef __ASM_MACH_LOONGSON_SPACES_H_
+#define __ASM_MACH_LOONGSON_SPACES_H_
+
+#ifndef CAC_BASE
+#if defined(CONFIG_64BIT)
+#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_CPU_LOONGSON3)
+#define CAC_BASE        _AC(0x9800000000000000, UL)
+#else
+#define CAC_BASE        _AC(0xa800000000000000, UL)
+#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_CPU_LOONGSON3 */
+#endif /* CONFIG_64BIT */
+#endif /* CONFIG_CAC_BASE */
+
+#ifdef CONFIG_CPU_LOONGSON3
+#define K_CALG_COH_SHAREABLE	3
+#endif
+
+#include <asm/mach-generic/spaces.h>
+#endif
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index 44b705d..c2edae3 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -126,6 +126,8 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_PROC_FAMILY "LOONGSON1 "
 #elif defined CONFIG_CPU_LOONGSON2
 #define MODULE_PROC_FAMILY "LOONGSON2 "
+#elif defined CONFIG_CPU_LOONGSON3
+#define MODULE_PROC_FAMILY "LOONGSON3 "
 #elif defined CONFIG_CPU_CAVIUM_OCTEON
 #define MODULE_PROC_FAMILY "OCTEON "
 #elif defined CONFIG_CPU_XLR
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index 32aea48..6c1e99e 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -235,6 +235,13 @@ static inline uint64_t pte_to_entrylo(unsigned long pte_val)
 #define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT)
 #define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)
 
+#elif defined(CONFIG_CPU_LOONGSON3)
+
+#define _CACHE_UNCACHED             (2<<_CACHE_SHIFT)  /* LOONGSON       */
+#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT)  /* LOONGSON       */
+#define _CACHE_CACHABLE_COHERENT    (3<<_CACHE_SHIFT)  /* LOONGSON-3     */
+#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)  /* LOONGSON       */
+
 #else
 
 #define _CACHE_CACHABLE_NO_WA	    (0<<_CACHE_SHIFT)  /* R4600 only	  */
-- 
1.7.7.3

  reply	other threads:[~2013-12-15 12:15 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-15 12:14 [PATCH V15 00/12] MIPS: Add Loongson-3 based machines support Huacai Chen
2013-12-15 12:14 ` Huacai Chen [this message]
2013-12-30 21:09   ` [PATCH V15 01/12] MIPS: Loongson: Add basic Loongson-3 definition Aurelien Jarno
2013-12-15 12:14 ` [PATCH V15 02/12] MIPS: Loongson: Add basic Loongson-3 CPU support Huacai Chen
2013-12-30 21:33   ` Aurelien Jarno
2013-12-31 15:17     ` Aaro Koskinen
2013-12-31 15:43       ` Aurelien Jarno
     [not found]         ` <CAAhV-H6eKg0Q0oDeDW6mp6p7Qh3dr07n1PDe9BPL37tsX286gw@mail.gmail.com>
2014-01-01 16:09           ` Aurelien Jarno
2013-12-15 12:14 ` [PATCH V15 03/12] MIPS: Loongson 3: Add Lemote-3A machtypes definition Huacai Chen
2013-12-30 21:43   ` Aurelien Jarno
     [not found]     ` <CAAhV-H66qshv-44q0XR6bfX7=KPa6NzDLO8AtY0Ed0AZScJ8=A@mail.gmail.com>
2014-01-01 16:09       ` Aurelien Jarno
     [not found]         ` <CAAhV-H49=Mxt+LJgpQQKJyhj87Hw6_kU4F05sEXNHueYuDOjaA@mail.gmail.com>
2014-01-04 22:23           ` Aurelien Jarno
2013-12-15 12:14 ` [PATCH V15 04/12] MIPS: Loongson: Add UEFI-like firmware interface support Huacai Chen
2014-01-04 22:23   ` Aurelien Jarno
     [not found]     ` <CAAhV-H5CPNwgFD595hc0RBV2ETa1xGRdhns2sU37+=2+x9foxQ@mail.gmail.com>
2014-01-05 17:05       ` Aurelien Jarno
2013-12-15 12:14 ` [PATCH V15 05/12] MIPS: Loongson 3: Add HT-linked PCI support Huacai Chen
2014-01-04 22:24   ` Aurelien Jarno
     [not found]     ` <CAAhV-H4sOKmDUr_0g2BxoG46G+yP2Xp80E2Qn1GATZTgn86U_w@mail.gmail.com>
2014-01-05 17:05       ` Aurelien Jarno
2013-12-15 12:14 ` [PATCH V15 06/12] MIPS: Loongson 3: Add IRQ init and dispatch support Huacai Chen
2014-01-04 22:54   ` Aurelien Jarno
     [not found]     ` <CAAhV-H66B3xkDSm-ftu_1M3ov3MQndd4dO9TxqcMpKmJXL3NUw@mail.gmail.com>
2014-01-05 17:05       ` Aurelien Jarno
2013-12-15 12:14 ` [PATCH V15 07/12] MIPS: Loongson 3: Add serial port support Huacai Chen
2014-01-04 22:54   ` Aurelien Jarno
     [not found]     ` <CAAhV-H55m3B-sVtArQELOeF-TDGRk9j2SQk8o5J7RS5oaD4M7g@mail.gmail.com>
2014-01-05 17:05       ` Aurelien Jarno
2013-12-15 12:14 ` [PATCH V15 08/12] MIPS: Loongson: Add swiotlb to support big memory (>4GB) Huacai Chen
2013-12-31 14:47   ` Aurelien Jarno
2013-12-15 12:14 ` [PATCH V15 09/12] MIPS: Loongson: Add Loongson-3 Kconfig options Huacai Chen
2014-01-04 23:07   ` Aurelien Jarno
     [not found]     ` <CAAhV-H4tTyK=sF7Zrh8Mj3pSNSZFX98Db_inS6oNKvFuqM7ziw@mail.gmail.com>
2014-01-05 17:05       ` Aurelien Jarno
2013-12-15 12:14 ` [PATCH V15 10/12] MIPS: Loongson 3: Add Loongson-3 SMP support Huacai Chen
2014-01-04 23:25   ` Aurelien Jarno
     [not found]     ` <CAAhV-H4XvyEa6DzQxZye6djHdW+VZ4vYLkyDHOskXDh8aXjPKw@mail.gmail.com>
2014-01-05 17:05       ` Aurelien Jarno
2013-12-15 12:14 ` [PATCH V15 11/12] MIPS: Loongson 3: Add CPU hotplug support Huacai Chen
2014-01-04 23:44   ` Aurelien Jarno
     [not found]     ` <CAAhV-H7GG2JMyxU242i=tmp=F5Qmgd3DrMjzpnNYWm=rB2b8PA@mail.gmail.com>
2014-01-05 17:05       ` Aurelien Jarno
2013-12-15 12:14 ` [PATCH V15 12/12] MIPS: Loongson: Add a Loongson-3 default config file Huacai Chen
2014-01-04 23:16   ` Aurelien Jarno
     [not found]     ` <CAAhV-H6wXh7uMN4CbJfRhfm_VaxpYRjQLm6diPH8yU1sLdAXNg@mail.gmail.com>
2014-01-05 17:05       ` Aurelien Jarno
2013-12-30 21:54 ` [PATCH V15 00/12] MIPS: Add Loongson-3 based machines support Aurelien Jarno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1387109676-540-2-git-send-email-chenhc@lemote.com \
    --to=chenhc@lemote.com \
    --cc=Steven.Hill@imgtec.com \
    --cc=john@phrozen.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    --cc=taohl@lemote.com \
    --cc=wuzhangjin@gmail.com \
    --cc=yanh@lemote.com \
    --cc=zhangfx@lemote.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox