From: Antony Pavlov <antonynpavlov@gmail.com>
To: linux-mips@linux-mips.org
Cc: Yegor Yefremov <yegorslists@googlemail.com>,
Antony Pavlov <antonynpavlov@gmail.com>,
Gabor Juhos <juhosg@openwrt.org>, Alban Bedel <albeu@free.fr>,
devicetree@vger.kernel.org
Subject: [RFC 2/4] MIPS: dts: qca: introduces AR9331 devicetree
Date: Mon, 18 Jan 2016 02:56:25 +0300 [thread overview]
Message-ID: <1453074987-3356-3-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1453074987-3356-1-git-send-email-antonynpavlov@gmail.com>
This patch introduces devicetree for Atheros AR9331 SoC (AKA Hornet).
The AR9331 chip is a Wi-Fi System-On-Chip (WiSOC),
typically used in very cheap Access Points and Routers.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
---
arch/mips/boot/dts/qca/ar9331.dtsi | 113 +++++++++++++++++++++++++++++++++++++
1 file changed, 113 insertions(+)
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
new file mode 100644
index 0000000..49513b0
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -0,0 +1,113 @@
+#include <dt-bindings/clock/ar933x-clk.h>
+
+/ {
+ compatible = "qca,ar9331";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ reg = <0>;
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ compatible = "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,ddr-wb-channel-interrupts = <2>, <3>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&miscintc>;
+
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "qca,ar9330-uart";
+ reg = <0x18020000 0x14>;
+
+ interrupts = <3>;
+
+ clocks = <&pll AR933X_CLK_UART>;
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar7100-gpio";
+ reg = <0x18040000 0x34>;
+ interrupts = <2>;
+
+ ngpios = <30>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ status = "disabled";
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar9330-pll";
+ reg = <0x18050000 0x20>;
+
+ #clock-cells = <1>;
+ };
+
+ miscintc: interrupt-controller@18060010 {
+ compatible = "qca,ar7240-misc-intc";
+ reg = <0x18060010 0x4>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+
+ clocks = <&pll AR933X_CLK_AHB>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+ };
+};
--
2.6.2
next prev parent reply other threads:[~2016-01-17 23:57 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-17 23:56 [RFC 0/4] MIPS: ath79: introduce AR9331 devicetree support Antony Pavlov
2016-01-17 23:56 ` [RFC 1/4] WIP: MIPS: ath79: make ar933x clks more devicetree-friendly Antony Pavlov
2016-01-18 19:57 ` Alban
2016-01-21 0:12 ` Antony Pavlov
2016-01-21 8:12 ` Alban
2016-01-21 10:17 ` Antony Pavlov
2016-01-21 11:03 ` Alban
2016-01-17 23:56 ` Antony Pavlov [this message]
2016-01-17 23:56 ` [RFC 3/4] MIPS: ath79: add initial support for TP-LINK MR3020 Antony Pavlov
2016-01-17 23:56 ` [RFC 4/4] WIP: MIPS: add tl-mr3020-dt-raw_defconfig Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453074987-3356-3-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=albeu@free.fr \
--cc=devicetree@vger.kernel.org \
--cc=juhosg@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=yegorslists@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox