From: Antony Pavlov <antonynpavlov@gmail.com>
To: linux-mips@linux-mips.org
Cc: Antony Pavlov <antonynpavlov@gmail.com>, Alban Bedel <albeu@free.fr>
Subject: [RFC v3 07/14] MIPS: dts: qca: simplify Makefile
Date: Sat, 23 Jan 2016 23:17:24 +0300 [thread overview]
Message-ID: <1453580251-2341-8-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1453580251-2341-1-git-send-email-antonynpavlov@gmail.com>
Do as arch/mips/boot/dts/ralink/Makefile does.
Without this patch adding a dtb-file leads
to adding __two__ lines to the Makefile.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
---
arch/mips/boot/dts/qca/Makefile | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
index 2d61455d..244329e 100644
--- a/arch/mips/boot/dts/qca/Makefile
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -1,8 +1,7 @@
# All DTBs
-dtb-$(CONFIG_ATH79) += ar9132_tl_wr1043nd_v1.dtb
+dtb-$(CONFIG_DTB_TL_WR1043ND_V1) += ar9132_tl_wr1043nd_v1.dtb
-# Select a DTB to build in the kernel
-obj-$(CONFIG_DTB_TL_WR1043ND_V1) += ar9132_tl_wr1043nd_v1.dtb.o
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
# Force kbuild to make empty built-in.o if necessary
obj- += dummy.o
--
2.6.2
next prev parent reply other threads:[~2016-01-23 20:19 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-23 20:17 [RFC v3 00/14] MIPS: AR913X/AR933X devicetree patchseries Antony Pavlov
2016-01-23 20:17 ` [RFC v3 01/14] WIP: clk: add Atheros AR724X/AR913X/AR933X SoCs clock driver Antony Pavlov
2016-01-25 22:21 ` Alban
2016-01-31 20:41 ` Antony Pavlov
2016-02-01 11:03 ` Alban
2016-01-30 0:27 ` Stephen Boyd
2016-02-01 0:23 ` Antony Pavlov
2016-01-23 20:17 ` [RFC v3 02/14] MIPS: ath79: use clk-ath79.c driver for AR913X/AR933X Antony Pavlov
2016-01-25 22:24 ` Alban
2016-02-01 23:34 ` Ralf Baechle
2016-01-23 20:17 ` [RFC v3 03/14] MIPS: dts: qca: ar9132: use dt-bindings/clock/ath79-clk.h macros Antony Pavlov
2016-01-23 20:17 ` [RFC v3 04/14] MIPS: dts: qca: ar9132: make extosc-related description shorter Antony Pavlov
2016-01-23 20:17 ` [RFC v3 05/14] MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: drop unused alias node Antony Pavlov
2016-01-25 22:25 ` Alban
2016-01-23 20:17 ` [RFC v3 06/14] MIPS: dts: qca: ar9132: use short references for uart and spi nodes Antony Pavlov
2016-01-25 22:31 ` Alban
2016-02-01 18:41 ` Antony Pavlov
2016-01-23 20:17 ` Antony Pavlov [this message]
2016-01-25 22:41 ` [RFC v3 07/14] MIPS: dts: qca: simplify Makefile Alban
2016-01-31 21:15 ` Antony Pavlov
2016-01-23 20:17 ` [RFC v3 08/14] MIPS: dts: qca: introduce AR9331 devicetree Antony Pavlov
2016-01-25 22:46 ` Alban
2016-01-31 20:59 ` Antony Pavlov
2016-03-14 18:53 ` Antony Pavlov
2016-01-23 20:17 ` [RFC v3 09/14] MIPS: ath79: add initial support for TP-LINK MR3020 Antony Pavlov
2016-01-23 20:17 ` [RFC v3 10/14] devicetree: add Dragino vendor id Antony Pavlov
2016-01-26 21:16 ` Rob Herring
2016-01-23 20:17 ` [RFC v3 11/14] MIPS: ath79: add initial support for Dragino MS14 (Dragino 2) Antony Pavlov
2016-01-23 20:17 ` [RFC v3 12/14] devicetree: add Onion Corporation vendor id Antony Pavlov
2016-01-26 21:15 ` Rob Herring
2016-01-27 8:42 ` Antony Pavlov
2016-01-23 20:17 ` [RFC v3 13/14] MIPS: ath79: add initial support for Onion Omega Antony Pavlov
2016-01-23 20:17 ` [RFC v3 14/14] WIP: MIPS: ath79: add devicetree defconfigs Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453580251-2341-8-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=albeu@free.fr \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox