From: Binbin Zhou <zhoubb@lemote.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>,
"Steven J. Hill" <Steven.Hill@imgtec.com>,
linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
Zhangjin Wu <wuzhangjin@gmail.com>,
Kelvin Cheung <keguang.zhang@gmail.com>,
Binbin Zhou <zhoubb@lemote.com>, Chunbo Cui <cuichboo@163.com>,
Huacai Chen <chenhc@lemote.com>
Subject: [PATCH RESEND v4 9/9] MIPS: Loongson: Add a Loongson-1A default config file
Date: Thu, 19 May 2016 09:38:32 +0800 [thread overview]
Message-ID: <1463621912-9883-8-git-send-email-zhoubb@lemote.com> (raw)
In-Reply-To: <1463621912-9883-1-git-send-email-zhoubb@lemote.com>
Signed-off-by: Chunbo Cui <cuichboo@163.com>
Signed-off-by: Binbin Zhou <zhoubb@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
---
arch/mips/configs/loongson1a_defconfig | 131 +++++++++++++++++++++++++++++++++
1 file changed, 131 insertions(+)
create mode 100644 arch/mips/configs/loongson1a_defconfig
diff --git a/arch/mips/configs/loongson1a_defconfig b/arch/mips/configs/loongson1a_defconfig
new file mode 100644
index 0000000..6a0450e
--- /dev/null
+++ b/arch/mips/configs/loongson1a_defconfig
@@ -0,0 +1,131 @@
+CONFIG_MACH_LOONGSON32=y
+CONFIG_PAGE_SIZE_16KB=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_1000=y
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_SECCOMP is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CGROUPS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_EXPERT=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_AHCI_PLATFORM=y
+# CONFIG_ATA_SFF is not set
+CONFIG_NETDEVICES=y
+CONFIG_NETCONSOLE=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_REALTEK_PHY=y
+# CONFIG_USB_NET_DRIVERS is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_SPI=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=m
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=m
+CONFIG_USB_GADGET=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_XZ_DEC=y
--
1.9.1
prev parent reply other threads:[~2016-05-19 1:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-19 1:38 [PATCH RESEND v4 0/9] MIPS: Loongson: Add the Loongson-1A processor support Binbin Zhou
2016-05-19 1:38 ` [PATCH RESEND v4 1/9] MIPS: Loongson: Add basic Loongson-1A CPU support Binbin Zhou
2016-08-02 8:32 ` Ralf Baechle
2016-05-19 1:38 ` [PATCH RESEND v4 2/9] MIPS: Loongson: Add Loongson-1A Kconfig options Binbin Zhou
2016-05-19 1:38 ` [PATCH RESEND v4 3/9] MIPS: Loongson: Add platform devices for Loongson-1A/1B Binbin Zhou
2016-05-19 1:38 ` [PATCH RESEND v4 4/9] MIPS: Loongson: Add loongson-1A board support Binbin Zhou
2016-05-19 1:38 ` [PATCH RESEND v4 7/9] MIPS: Loongson-1A: Enable SPARSEMEN and HIGHMEM Binbin Zhou
2016-08-02 8:29 ` Ralf Baechle
2016-08-02 9:47 ` James Hogan
2016-08-02 9:47 ` James Hogan
2016-05-19 1:38 ` [PATCH RESEND v4 8/9] MIPS: Loongson-1B: Update config file Binbin Zhou
2016-05-19 1:38 ` Binbin Zhou [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463621912-9883-8-git-send-email-zhoubb@lemote.com \
--to=zhoubb@lemote.com \
--cc=Steven.Hill@imgtec.com \
--cc=chenhc@lemote.com \
--cc=cuichboo@163.com \
--cc=john@phrozen.org \
--cc=keguang.zhang@gmail.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=wuzhangjin@gmail.com \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox