From: Florian Fainelli <florian@openwrt.org>
To: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Subject: Re: [PATCH 2/2] MIPS: BCM63XX: be consistent in clock bits enable naming
Date: Tue, 05 Jun 2012 11:55:26 +0200 [thread overview]
Message-ID: <1470070.RaZQ4a8ogE@flexo> (raw)
In-Reply-To: <1328018888-5533-3-git-send-email-florian@openwrt.org>
Hi Ralf,
On Tuesday 31 January 2012 15:08:08 Florian Fainelli wrote:
> Remove the _CLK suffix from the BCM6368 clock bits definitions to be
> consistent with what is already present.
>
> Signed-off-by: Florian Fainelli <florian@openwrt.org>
This patch is a prerequisite for BCM63xx's SPI support, and should be applied
to your master tree in order to fix the following build failure, the patch
applies cleanly to your master tree.
arch/mips/bcm63xx/clk.c: In function 'spi_set':
arch/mips/bcm63xx/clk.c:188:10: error: 'CKCTL_6368_SPI_EN' undeclared (first
use in this function)
arch/mips/bcm63xx/clk.c:188:10: note: each undeclared identifier is reported
only once for each function it appears in
make[2]: *** [arch/mips/bcm63xx/clk.o] Error 1
Thanks!
> ---
> arch/mips/bcm63xx/clk.c | 6 ++--
> arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 36
++++++++++----------
> 2 files changed, 21 insertions(+), 21 deletions(-)
>
> diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
> index 9d57c71..8d2ea22 100644
> --- a/arch/mips/bcm63xx/clk.c
> +++ b/arch/mips/bcm63xx/clk.c
> @@ -120,7 +120,7 @@ static void enetsw_set(struct clk *clk, int enable)
> {
> if (!BCMCPU_IS_6368())
> return;
> - bcm_hwclock_set(CKCTL_6368_ROBOSW_CLK_EN |
> + bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
> CKCTL_6368_SWPKT_USB_EN |
> CKCTL_6368_SWPKT_SAR_EN, enable);
> if (enable) {
> @@ -163,7 +163,7 @@ static void usbh_set(struct clk *clk, int enable)
> if (BCMCPU_IS_6348())
> bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
> else if (BCMCPU_IS_6368())
> - bcm_hwclock_set(CKCTL_6368_USBH_CLK_EN, enable);
> + bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
> }
>
> static struct clk clk_usbh = {
> @@ -199,7 +199,7 @@ static void xtm_set(struct clk *clk, int enable)
> if (!BCMCPU_IS_6368())
> return;
>
> - bcm_hwclock_set(CKCTL_6368_SAR_CLK_EN |
> + bcm_hwclock_set(CKCTL_6368_SAR_EN |
> CKCTL_6368_SWPKT_SAR_EN, enable);
>
> if (enable) {
> diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
> index 94d4faa..6ddd081 100644
> --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
> +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
> @@ -90,29 +90,29 @@
> #define CKCTL_6368_PHYMIPS_EN (1 << 6)
> #define CKCTL_6368_SWPKT_USB_EN (1 << 7)
> #define CKCTL_6368_SWPKT_SAR_EN (1 << 8)
> -#define CKCTL_6368_SPI_CLK_EN (1 << 9)
> -#define CKCTL_6368_USBD_CLK_EN (1 << 10)
> -#define CKCTL_6368_SAR_CLK_EN (1 << 11)
> -#define CKCTL_6368_ROBOSW_CLK_EN (1 << 12)
> -#define CKCTL_6368_UTOPIA_CLK_EN (1 << 13)
> -#define CKCTL_6368_PCM_CLK_EN (1 << 14)
> -#define CKCTL_6368_USBH_CLK_EN (1 << 15)
> +#define CKCTL_6368_SPI_EN (1 << 9)
> +#define CKCTL_6368_USBD_EN (1 << 10)
> +#define CKCTL_6368_SAR_EN (1 << 11)
> +#define CKCTL_6368_ROBOSW_EN (1 << 12)
> +#define CKCTL_6368_UTOPIA_EN (1 << 13)
> +#define CKCTL_6368_PCM_EN (1 << 14)
> +#define CKCTL_6368_USBH_EN (1 << 15)
> #define CKCTL_6368_DISABLE_GLESS_EN (1 << 16)
> -#define CKCTL_6368_NAND_CLK_EN (1 << 17)
> -#define CKCTL_6368_IPSEC_CLK_EN (1 << 17)
> +#define CKCTL_6368_NAND_EN (1 << 17)
> +#define CKCTL_6368_IPSEC_EN (1 << 17)
>
> #define CKCTL_6368_ALL_SAFE_EN (CKCTL_6368_SWPKT_USB_EN | \
> CKCTL_6368_SWPKT_SAR_EN | \
> - CKCTL_6368_SPI_CLK_EN | \
> - CKCTL_6368_USBD_CLK_EN | \
> - CKCTL_6368_SAR_CLK_EN | \
> - CKCTL_6368_ROBOSW_CLK_EN | \
> - CKCTL_6368_UTOPIA_CLK_EN | \
> - CKCTL_6368_PCM_CLK_EN | \
> - CKCTL_6368_USBH_CLK_EN | \
> + CKCTL_6368_SPI_EN | \
> + CKCTL_6368_USBD_EN | \
> + CKCTL_6368_SAR_EN | \
> + CKCTL_6368_ROBOSW_EN | \
> + CKCTL_6368_UTOPIA_EN | \
> + CKCTL_6368_PCM_EN | \
> + CKCTL_6368_USBH_EN | \
> CKCTL_6368_DISABLE_GLESS_EN | \
> - CKCTL_6368_NAND_CLK_EN | \
> - CKCTL_6368_IPSEC_CLK_EN)
> + CKCTL_6368_NAND_EN | \
> + CKCTL_6368_IPSEC_EN)
>
> /* System PLL Control register */
> #define PERF_SYS_PLL_CTL_REG 0x8
> --
> 1.7.5.4
>
prev parent reply other threads:[~2012-06-05 9:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-31 14:08 [PATCH 0/2] MIPS: BCM63XX: misc cleanup Florian Fainelli
2012-01-31 14:08 ` [PATCH 1/2] MIPS: BCM63XX: fix platform_devices id Florian Fainelli
2012-01-31 14:08 ` [PATCH 2/2] MIPS: BCM63XX: be consistent in clock bits enable naming Florian Fainelli
2012-06-05 9:55 ` Florian Fainelli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470070.RaZQ4a8ogE@flexo \
--to=florian@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox