From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by neteng.engr.sgi.com (970903.SGI.8.8.7/960327.SGI.AUTOCF) via SMTP id OAA488084 for ; Thu, 27 Nov 1997 14:59:19 -0800 (PST) Return-Path: Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (950413.SGI.8.6.12/960327.SGI.AUTOCF) id OAA02648 for linux-list; Thu, 27 Nov 1997 14:54:25 -0800 Received: from oz.engr.sgi.com (oz.engr.sgi.com [150.166.61.27]) by cthulhu.engr.sgi.com (950413.SGI.8.6.12/960327.SGI.AUTOCF) via ESMTP id OAA02643; Thu, 27 Nov 1997 14:54:23 -0800 Received: (from ariel@localhost) by oz.engr.sgi.com (970903.SGI.8.8.7/960327.SGI.AUTOCF) id OAA27112; Thu, 27 Nov 1997 14:54:20 -0800 (PST) From: ariel@oz.engr.sgi.com (Ariel Faigon) Message-Id: <199711272254.OAA27112@oz.engr.sgi.com> Subject: Re: Problems with booting SGI/Linux To: kron@informatics.muni.cz (David Kostal) Date: Thu, 27 Nov 1997 14:54:20 -0800 (PST) Cc: linux@cthulhu.engr.sgi.com (SGI/Linux mailing list) In-Reply-To: <199711271811.TAA11711@anxur.fi.muni.cz> from "David Kostal" at Nov 27, 97 07:11:10 pm Reply-To: ariel@cthulhu.engr.sgi.com (Ariel Faigon) Organization: Silicon Graphics Inc. X-Mailer: ELM [version 2.4 PL24 ME5a] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-linux@cthulhu.engr.sgi.com Precedence: bulk Could someone help David on this ? Is this a R4600 PC vs SC thing ? A known hardware bug in R4600 PC ? David: you may want to subscribe to the SGI/Linux mailimg list (if your aren't yet): To: linux-request@engr.sgi.com Body: subscribe linux : :Hallo, :I've tried to run sgi/linux on our INDY/R4600PC 100MHz, but I was :unable to boot the kernel. I used kernel from :test/vmlinux-970916-efs.gz . The booting process stoped after while. :I use this kernel, because I wasn't able to cross-compile my own :kernel. :I send you the messages (handly) rewriten from the console. Can you, :please, lat me know, where was problem? If you wil need more info or :more tests on my Indy, I will do it. : :thanks a lot : :david kostal (kron@fi.muni.cz) :----+ : : : :PROMLIB: SGI ARCS firmware Version1 Revision 10 :PROMLIB: Total free ram 31502336 bytes (...) :ARCH: SGI-IP22 :CPU: MIPS-R4600 FPU ICACHE DCACHE :Loading R4000 MNV routines :CPU revision is: 00002020 :Primary ICACHE 16K (linesize 32 bytes) :Primary DCACHE 16K (linesize 32 bytes) :R4600/R5000 SCACHE size 0 Kb linesize 32 bytes :MC: SGI memory controller Revision 3 :calculating r4koff ... 0007eedc(519900) :GFX INIT: SHMIQ setup :usenamedone misc device registred (minor: 151) :umesa device registred (major 86) :video screen size is 00004c88a18833e948 :console: 16 point font, 992 scans :console: color NEWPORT 158x62, 1 virtual console (max 63) :Calibrating delay loop ... ok - 103.83 BogoMIPS :Memory: 28616/163836 available (1020k kernel code, 2352k data) :Swansea University Computer Society NET3.035 for Linux 2.0 :NET3: Unix domain sockets 0.13 for Linux NET3.035. :Swansea University Computer Society TCP/IP for NET3.034 :IP Protocols: IGMP, ICMP, UDP, TCP :Checking 'wait' instruction... available. :Linux version 2.1.55 (slaue@neor.ingenia.ca) (gcc version 2.7.2) #122 9.16. 16:30:52 :Posix counfornance testing by UNIFIX :Starting kswapd v 1.2.3 :SGI Zilog 8530 serial driver version 1.08 tty00 at 0xbbbd9838 (irq = 21) is a Zilog 8530 :SGI Zilog 8530 serial driver version 1.08 tty01 at 0xbbbd9830 (irq = 21) is a Zilog 8530 :Got a bus error IRQ, shouldn't happen yet :$0 :0000 0000 1000 bc01 8811 0000 0000 0000 :$4 :8813 418c 8819 9630 89ff 5cf0 0000 0001 :$8 :1000 fc03 0000 0201 0000 9fe1 8811 99d8 :$12:0000 0001 0000 0001 0000 0001 ffff fffc :$16:0000 c000 89fe 1000 0000 0000 0000 0000 :$20:987b fc20 a874 6d10 9fc5 5664 0000 0000 :$24:1000 bc01 0000 000f 0000 0000 0000 0000 :$28:0000 0000 89ff 5c90 0000 0001 8800 b0c8 :epc: 88033258 :slots: 1000fc03 :Cause: 0000 4000 :Spinning..... : -- Peace, Ariel From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: ariel@oz.engr.sgi.com (Ariel Faigon) Message-ID: <199711272254.OAA27112@oz.engr.sgi.com> Subject: Re: Problems with booting SGI/Linux Date: Thu, 27 Nov 1997 14:54:20 -0800 (PST) In-Reply-To: <199711271811.TAA11711@anxur.fi.muni.cz> from "David Kostal" at Nov 27, 97 07:11:10 pm Reply-To: ariel@cthulhu.engr.sgi.com (Ariel Faigon) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-linux@cthulhu.engr.sgi.com To: David Kostal Cc: SGI/Linux mailing list Message-ID: <19971127225420.28t5XUbIL0zkgCwLiLfs87fb9ci042rC7lES5WysdlY@z> Could someone help David on this ? Is this a R4600 PC vs SC thing ? A known hardware bug in R4600 PC ? David: you may want to subscribe to the SGI/Linux mailimg list (if your aren't yet): To: linux-request@engr.sgi.com Body: subscribe linux : :Hallo, :I've tried to run sgi/linux on our INDY/R4600PC 100MHz, but I was :unable to boot the kernel. I used kernel from :test/vmlinux-970916-efs.gz . The booting process stoped after while. :I use this kernel, because I wasn't able to cross-compile my own :kernel. :I send you the messages (handly) rewriten from the console. Can you, :please, lat me know, where was problem? If you wil need more info or :more tests on my Indy, I will do it. : :thanks a lot : :david kostal (kron@fi.muni.cz) :----+ : : : :PROMLIB: SGI ARCS firmware Version1 Revision 10 :PROMLIB: Total free ram 31502336 bytes (...) :ARCH: SGI-IP22 :CPU: MIPS-R4600 FPU ICACHE DCACHE :Loading R4000 MNV routines :CPU revision is: 00002020 :Primary ICACHE 16K (linesize 32 bytes) :Primary DCACHE 16K (linesize 32 bytes) :R4600/R5000 SCACHE size 0 Kb linesize 32 bytes :MC: SGI memory controller Revision 3 :calculating r4koff ... 0007eedc(519900) :GFX INIT: SHMIQ setup :usenamedone misc device registred (minor: 151) :umesa device registred (major 86) :video screen size is 00004c88a18833e948 :console: 16 point font, 992 scans :console: color NEWPORT 158x62, 1 virtual console (max 63) :Calibrating delay loop ... ok - 103.83 BogoMIPS :Memory: 28616/163836 available (1020k kernel code, 2352k data) :Swansea University Computer Society NET3.035 for Linux 2.0 :NET3: Unix domain sockets 0.13 for Linux NET3.035. :Swansea University Computer Society TCP/IP for NET3.034 :IP Protocols: IGMP, ICMP, UDP, TCP :Checking 'wait' instruction... available. :Linux version 2.1.55 (slaue@neor.ingenia.ca) (gcc version 2.7.2) #122 9.16. 16:30:52 :Posix counfornance testing by UNIFIX :Starting kswapd v 1.2.3 :SGI Zilog 8530 serial driver version 1.08 tty00 at 0xbbbd9838 (irq = 21) is a Zilog 8530 :SGI Zilog 8530 serial driver version 1.08 tty01 at 0xbbbd9830 (irq = 21) is a Zilog 8530 :Got a bus error IRQ, shouldn't happen yet :$0 :0000 0000 1000 bc01 8811 0000 0000 0000 :$4 :8813 418c 8819 9630 89ff 5cf0 0000 0001 :$8 :1000 fc03 0000 0201 0000 9fe1 8811 99d8 :$12:0000 0001 0000 0001 0000 0001 ffff fffc :$16:0000 c000 89fe 1000 0000 0000 0000 0000 :$20:987b fc20 a874 6d10 9fc5 5664 0000 0000 :$24:1000 bc01 0000 000f 0000 0000 0000 0000 :$28:0000 0000 89ff 5c90 0000 0001 8800 b0c8 :epc: 88033258 :slots: 1000fc03 :Cause: 0000 4000 :Spinning..... : -- Peace, Ariel