From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by neteng.engr.sgi.com (971110.SGI.8.8.8/960327.SGI.AUTOCF) via SMTP id RAA153936 for ; Mon, 26 Jan 1998 17:54:13 -0800 (PST) Return-Path: Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (950413.SGI.8.6.12/960327.SGI.AUTOCF) id RAA20791 for linux-list; Mon, 26 Jan 1998 17:51:43 -0800 Received: from fir.engr.sgi.com (fir.engr.sgi.com [150.166.49.183]) by cthulhu.engr.sgi.com (950413.SGI.8.6.12/960327.SGI.AUTOCF) via ESMTP id RAA20780; Mon, 26 Jan 1998 17:51:41 -0800 Received: (from wje@localhost) by fir.engr.sgi.com (950413.SGI.8.6.12/950213.SGI.AUTOCF) id RAA09867; Mon, 26 Jan 1998 17:51:40 -0800 Date: Mon, 26 Jan 1998 17:51:40 -0800 Message-Id: <199801270151.RAA09867@fir.engr.sgi.com> From: "William J. Earl" To: Alex deVries Cc: SGI Linux Subject: Re: More on modules... In-Reply-To: References: Sender: owner-linux@cthulhu.engr.sgi.com Precedence: bulk Alex deVries writes: > > The modutils in the CVS appears to work; I'll get an RPM out tonight for > others. > > But, I use the term 'work' with a grain of salt; the modules appear to > load, but I get errors like: > Illegal instruction at c000c0d0 ra=88034ed4 > Unable to handle kernel paging request at virtual address c0008113, epc == > c000c0d8, ra == 88034ed4 > Killed ... I wonder if the kernel is properly synchronzing the I-cache with the D-cache after loading the module. In general, you need to writeback the primary D-cache and invalidate the primary I-cache for the range of addresses occupied by the driver (or simply index-writeback-invalidate all of the D-cache and index-invalidate all of the I-cache, if the driver is larger than the cache size).